2BBD2-04895306O.i Wireless Charger

WC05W Wireless Charging Dock Product User Manual Input: USB-C 5V/9V/12V PD Output: Qi Wireless Charging Max 5W Coil: 6.8uH 35mm Operating Steps 1. Connect Power: Insert the USB-C cable into a PD-compatible charger (5V1A/5V2A charger recommended), and connect to power. 2. Place Device: Place the Qi-compatible device centered on the charging dock panel, ensuring the coil area is aligned. 3. Start Charging: The device automatically enters charging mode and displays a charging icon to start charging. 4. Remove When Fully Charged: Charging stops automatically when fully charged. Simply remove the device. Important Notices ● Use a PD-compatible charger (5V1A/5V2A charger recommended). Avoid using low-quality chargers. ● Phone cases thicker than 3mm or containing metal/magnetic materials may affect charging efficiency. Removal is recommended. ● During charging, do not place metal foreign objects (coins, keys, etc.) between the phone and the coil panel. ● Operating temperature: 0~40 degC. Built-in overheat protection will pause charging at high temperatures. Wireless Charging Dock · User Manual · V1.0 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times. Only in the stated conditions, the device is shownto fully comply with the FCC RF Exposure requirements of KDB 447498.

Huish Outdoors LLC. 1540 N 2200 W Salt Lake City, UT 84116 Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2026/09/17 U.S. Agent Designation Huish Outdoors LLC. acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BBD2-04895306): Name and company of U.S. agent: GLOCERTS TECHNOLOGY INC Physical U.S. address of agent: 19784 SUNKISSED RIDGE DR RIVERSIDE, CA 92507 United States FRN of U.S. agent: 0036339737 Phone of U.S. agent: (626) 588-8039 Email address of U.S. agent: [email protected] GLOCERTS TECHNOLOGY INC acknowledges their obligation to accept service of process on behalf of Huish Outdoors LLC. with the FRN [0033493081] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. An expiration date for this letter does not exist. Sincerely, Signature Samer Khalil Director of Engineering Huish Outdoors LLC. Signature Huiying Fan Director GLOCERTS TECHNOLOGY INC 48_[mo del] US_Agent_2.911(d)(7) - U, V0 5

FCC ID: 2BBD2-04895306 External Photos of the EUT FCC ID: 2BBD2-04895306

Label and Location Size: L: 1.0cm*W: 0.2cm Label and Location FCC ID: 2BBD2-04895306

FCC ID: 2BBD2-04895306 Internal Photos of the EUT Coil Antenna FCC ID: 2BBD2-04895306 FCC ID: 2BBD2-04895306

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn RF Exposure-WPT Report Reference No. ..................... : FCC ID............................................. : CTA26073000202 2BBD2-04895306 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Aug. 14, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Applicant’s name ............................ : Huish Outdoors LLC. Address............................................ : 1540 N 2200 W Salt Lake City, UT 84116 Test specification ........................... : FCC CFR 47 PART 1, § 1.1310 Standard ........................................... : KDB 680106 D01 Wireless Power Transfer v04 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : O.i Wireless Charger Trade Mark ....................................... : Oceanic Manufacturer .................................... : Huish Outdoors LLC. Model/Type reference ...................... : 04.8953.06 Listed Models .................................. : N/A Ratings ............................................. : Input: 5V 1A Wireless Output: 5W Result ............................................... : PASS Report No.: CTA26073000202 Page 2 of 11 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : O.i Wireless Charger Model /Type : 04.8953.06 Listed Models : N/A Applicant : Huish Outdoors LLC. Address : 1540 N 2200 W Salt Lake City, UT 84116 Manufacturer : Huish Outdoors LLC. Address : 1540 N 2200 W Salt Lake City, UT 84116 Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26073000202 Page 3 of 11 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 TEST STANDARDS ............................................................................................................ 4 2 SUMMARY .......................................................................................................................... 5 2.1 General Remarks ..................................................................................................... 5 2.2 Product Description ................................................................................................. 5 2.3 Description of the test mode .................................................................................... 5 2.4 Special Accessories ................................................................................................. 5 2.5 Modifications ............................................................................................................ 6 3 TEST ENVIRONMENT ....................................................................................................... 7 3.1 Address of the test laboratory .................................................................................. 7 3.2 Test Facility .............................................................................................................. 7 3.3 Statement of the measurement uncertainty ............................................................. 7 3.4 Equipments Used during the Test ........................................................................... 7 4 Test limit .............................................................................................................................. 8 4.1 Requirement ............................................................................................................ 8 4.2 Test setup ................................................................................................................ 9 4.3 Test Procedures..................................................................................................... 10 4.4 Equipment Approval Considerations of KDB 680106 D01v04 .............................. 10 4.5 Test results ............................................................................................................ 10 4.6 Conclusion ............................................................................................................. 10 5 Photographs of the Test Setup ......................................................................................... 11 Report No.: CTA26073000202 Page 4 of 11 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai S…

Text truncated - open the document above for the full version.

产品规格承认书 SPECIFICATON APPROVAL 客户名称： CUSTOMER 客户品名： Product Name ofCustomer A11-35mm线圈模组 我方产品名（材质）： Product Mame ofOurs(Matenial) A11-35mm线圈模组 承 认： APPROVED 核准： 制表： 日期： APPROVED DRAWN 王兴 DATE 2026-7-27 页码 1 of 4 Manufacturer:Huish Outdoors LLC. Address:1540 N 2200 W Salt Lake City, UT 84116 Specification 规格内容 CISTOMEP/N: 客户品名 a11-35mm线圈模组 PARTNUMBER： 制造商料号 1.DIMENSIONS(外形尺寸）：mm A 5.2±0.5 B 8.6±1 C 33±1 D 35±1 E 20±2 F 2-5 G 总厚度2.3MAX H 磁片厚0.8±0.1 I J k L M N O R Q P APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日 期 PACE 页 码 王兴 2026-7-27 2 of 4 Specifcation 规 格 内 容 CUSTOMERP/N: 客户品名 a11-35mm线圈模组 PARTNUMBER： 制造商料号 5.WINDING DETAILS(绕线详细说明）： Wdy.NO. 绕 组 Start 开始 Finish 结束 Turns 圈数 Wire Dia 线径 Wdg.TyepeSprad/lose 绕线方法疏/密绕 Wdg.Directio n 绕线方向 Turns/Layer 层数/每层圈数 S F 14TS 0.08*70P 密绕 逆时针 1层/14TS 6.ELECTRICAL CHARACTERISTICS(电气特性）： PARAMETERS UNIN LIMTI Inductance ls@100KHz/1v UH 6.3UH±10％ Q @100KHz/1v 45MIN DCR @100KHz/1v Ωm 120MAX APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日期 PAGE 页码 王兴 2026-7-27 3 of 4 MATERIAL LIST 材 料 清 单 CUSTOMER P/N: 客 户 品 名 线圈模组 PARTNUMBER： 制造商料号 NO. Material name 材料名称 Description 品名描述 Manufacturer 制造商 Material 材质 1 丙酮丝包线 0.08*70P 99.95%紫铜 2 无铅锡条 高温 3 高温胶 金手指3mm 4 胶水 树脂胶 5 磁片 35*5.2*0.8MM 铁氧体.锰锌PC40 6 双面胶 手撕位背胶 7 珍珠棉 270*380*55 8 纸箱 280*390*190 9 10 APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制作 DATE 日期 PAGE 页码 王兴 2026-7-27 4 of 4

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT Report Reference No. ..................... : FCC ID............................................. : CTA26073000201 2BBD2-04895306 Compiled by ( position+printed name+signature) . : File administrators Zoey Cao Supervised by ( position+printed name+signature) . : Project Engineer Ace Chai Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Aug. 14, 2026 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Huish Outdoors LLC. Address............................................ : 1540 N 2200 W Salt Lake City, UT 84116 Test specification ........................... : Standard ........................................... : FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a- 2024 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : O.i Wireless Charger Trade Mark ....................................... : Oceanic Manufacturer .................................... : Huish Outdoors LLC. Model/Type reference ...................... : 04.8953.06 Listed Models .................................. : N/A Modulation Type ............................... : ASK Operation Frequency ........................ : From 110KHz~205KHz Ratings ............................................. : Input: 5V 1A Wireless Output: 5W Result ............................................... : PASS Report No.: CTA26073000201 Page 2 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : O.i Wireless Charger Model /Type : 04.8953.06 Listed Models : N/A Applicant : Huish Outdoors LLC. Address : 1540 N 2200 W Salt Lake City, UT 84116 Manufacturer : Huish Outdoors LLC. Address : 1540 N 2200 W Salt Lake City, UT 84116 Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA26073000201 Page 3 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S .................................................................. 4 2 S U M M A R Y ............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Description of the test mode 5 2.4 Special Accessories 5 2.5 Modifications 6 3 T E S T E N V I R O N M E N T ............................................................... 7 3.1 Address of the test laboratory 7 3.2 Test Facility 7 3.3 Environmental conditions 7 3.4 Summary of measurement results 8 3.5 Statement of the measurement uncertainty 8 3.6 Equipments Used during the Test 9 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................ 11 4.1 AC Power Conducted Emission 11 4.2 Radiated Emission 14 4.3 The 20dB bandwidth 18 4.4 Antenna Requirement 19 5 T E S T S E T U P P H O T O S O F T H E E U T .......................................... 20 6 PH O T O S O F T H E E U T ............................................................. 21 Report No.: CTA26073000201 Page 4 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15 Subpart C (Section 15.207): Conducted limits. FCC Rules and Regulations Part 15 Subpart C (Section 15.209): Radiated emission limits; general requirements. ANSI C63.10-2020+Cor. 1-2023+C63.10a-2024 + Errata to C63.10a-2024: American National Standard for Testing Unlicensed Wireless Devices Report No.: CTA26073000201 Page 5 of 25 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample : Jul. 30, 2026 Testing commenced on : Jul. 30, 2026 Testing concluded on : Aug. 14, 2026 2.2 Product Description Product Name: O.i Wireless Charger Model/Type reference: 04.8953.06 Power supply: Input: 5V 1A Wireless Output: 5W Test samples ID: CTA260730002-1# (Engineer sample) CTA260730002-2# (Normal sample) Hardware version: V1.0 Software version: V1.0 Operation frequency: 110KHz - 205KHz M…

Text truncated - open the document above for the full version.

FCC ID: 2BBD2-04895306 Test Setup Photos of the EUT