2BBDIVBK30C21Telematics Headunit

© Auto-Link reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. © 车联天下享有工业财产权的所有权利. 对复制以及传给第三方的行为我们有权追究责任 Page 1 User manual Model: 30C21 Part 1 Style figure Part 2 Statement & Notice Part 3 Function List Part 4 Warning Manufacturer: Wuxi Auto-Link World Information Technology Co., LTD Address:No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province.China Part 1 Style figure © Auto-Link reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. © 车联天下享有工业财产权的所有权利. 对复制以及传给第三方的行为我们有权追究责任 Page 2 1.1 Pin definition 1.1.1 Connector model list Connector number Items Description Model J1 （ Main board ） Main connector Taike 2420419-2 J2 （ Main board ） Ethernet Rosenberger E6S20A-40MT5A-A J3 （ Main board ） USB2.0 C&R CZ0652A J4 （ Main board ） LVDS OUT Rosenberger AMS29D-40MZ5-D © Auto-Link reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. © 车联天下享有工业财产权的所有权利. 对复制以及传给第三方的行为我们有权追究责任 Page 3 J5 （ Main board ） LVDS in Rosenberger AMS29D-40MZ5-A J6 （ Main board ） LVDS in/LVDS out Rosenberger AMS29D-40MZ5-C J7 （ Main board ） LVDS in Rosenberger AMS29D-40MZ5-B J8 （ Sub board ） USB2.0 C&R CZ0652B J9 （ Sub board ） GNSS ECT 818016525 J10 （ Sub board ） AM/FM ECT 818016519 J11 （ Sub board ） DAB ECT 818016527 J12 （ Sub board ） TBox ECT 818021777 J13 （ Sub board ） A2B MoLex 5023520200 1.1.2 J1-Main Connector 1.1.2.1 Diagram 1.1.2.2 Pin Definition No. Pin No. Function Description Signal Type Rated Current Remark 1 A01 Left rear door speaker + Audio analog signal / With the A02 twisted pair 2 A02 Left rear door speaker- Audio analog signal / With the A01 twisted pair 3 A03 IF_CAN_L communication signals 0.07 With the A04twisted pair 4 A04 IF_CAN_H communication signals 0.07 With the A03 twisted pair 5 A05 left anterior MIC- aural signal / With the A06 twisted pair 6 A06 left anterior MIC+ aural signal / With the A05 twisted pair 7 A07 Right frontMIC- aural signal / With the A08 twisted pair 8 A08 Right frontMIC+ aural signal / With the A07 twisted pair 9 A09 Right behindMIC- aural signal / With the A10 twisted pair © Auto-Link reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. © 车联天下享有工业财产权的所有权利. 对复制以及传给第三方的行为我们有权追究责任 Page 4 No. Pin No. Function Description Signal Type Rated Current Remark 10 A10 Right behindMIC+ aural signal / With the A09 twisted pair 11 A11 Left behindMIC- aural signal / With the A12 twisted pair 12 A12 Left behindMIC+ aural signal / With the A11 twisted pair 13 A13 Left front door speaker+ Audio analog signal / With the A14 twisted pair 14 A14 Left front door speaker- Audio analog signal / With the A13 twisted pair 15 A15 Right front door speaker+ Audio analog signal / With the A16 twisted pair 16 A16 Right front door speaker- Audio analog signal / With the A15twisted pair 17 A17 T-BOX Audio in – communication signals 0.02 Connect the TBOX PIN28 LINE OUT-to the A18 twisted pair 18 A18 T-BOX Audio in + direct-current (DC) 0.02 Connect the TBOX PIN8 to the A17 twisted pair 19 A19 T-BOX Audio GND Audio from the analog signal / Connect to the shielding layer, PIN 01, PIND07 20 A20 T-BOX Audio Mute In silent input line (reserved) direct-current (DC) / linkage TBOXPIN32 21 A21 HUD Screen Control enabled (HUD _ DIS _ EN) (reserved) communication signals 0.02 22 A22 Instrument control control (Cluster _ DIS _ EN) communication signals 0.02 23 A23 Central control screen control enable (IHU _ DIS _ EN) communication signals 0.02 24 A24 LHR control enabled (Rear seat _ DIS _ EN) (reserved) communication signals 0.02 Back seat screen 25 A25 NA communication signals NA 26 A26 NA NA / NA 27 A27 Right rear door speaker + Audio from the analog signal / With the A28 twisted pair 28 A28 Right rear door speaker- Audio from the analog signal / With the A27 twisted pair 29 A29 NA / / © Auto-Link reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. © 车联天下享有工业财产权的所有权利. 对复制以及传给第三方的行为我们有权追究责任 Page 5 No. Pin No. Function Description Signal Type Rated Current Remark 30 A30 NA / / 31 A31 NA / / 32 A32 Backlit Control Signal (ILLU) (Cancel) PWM / 33 A33 Left headrest speaker + (10W) Audio from the analog signal 0.5 34 A34 Left headrest speaker- (10W) Audio from the analog signal 0.5 35 A35 current source Switch (including reset) (cancel) communication signals 0.01 36 A36 Right headrest speaker + (10W) Audio from the analog signal 0.5 37 A37 Right head rest speaker- (10W) communication signals 0.5 T 1J version six connected ZDC, with 120 ohm terminal resistance 38 A38 NA / / 39 B01 AVM key input signal (cancel) direct-current (DC) / Connect the AVM button for a low-level effect 40 B02 First passenger seat belt alarm signal input analog signal 0.0012 Low level is effective 41 B03 Rear row left seat belt alarm signal input analog signal 0.0012 Low level is effective 42 B04 NA / / 43 B05 NA / / 44 B06 NA / / 45 B07 NA / / 46 B08 Right-side seat belt alarm signal input in the rear row analog signal 0.0012 Low level is effective 47 B09 Back rear seat belt alarm signal input analog signal 0.0012 Low level is effective 48 B10 Working / Memory current source (VBAT _ 1) current source 3 12V 49 B11 Working / Memory current source (VBAT _ 1) current source 3 12V 50 B12 current source Ground(GND) current source Ground 3 51 B13 current source Ground(GND) current source Ground 3 52 B14 BD_CAN_L communication signals 0.07 With the B15 twisted- pair wire 53 B15 BD_CAN_H communication signals 0.07 With the B14 twisted- pair wire 54 B16 Driving Mode Switch Input ECO SWITCH (Cancel) analog signal © Auto-Link reserves all rights even in th…

Text truncated - open the document above for the full version.

WuxiAuto-linkworldInformationTechnologyCo.,Ltd U.S. Agent Designationfor Serviceof Process (Applicant and U.S.Agentare SeparateParties) TO:FederalCommunications Commission 7435OaklandMillsRoad Columbia,MD 21046 ATTENTION:FCC Certification– Section2.911(d)(7) Information DesignatedU.S. Agent CompanyName:United ConsultingTechnologyServicesCo., Ltd. FRN:0033495714 Contact Name:DavidWu StreetAddress: 17800CASTLETONST STE665 CITYOF INDUSTRY City/Province/Zip:CA91748 Telephone No: (626) 217-4022 Email:[email protected] This letter is toconfirmthat we (“the DesignatedU.S. Agent)haveacceptedthe responsibility toact as the DesignatedU.S. Agent forServiceof Processas requiredbysection47 CFR2.911(d)(7)on behalfof the Applicantnotedbelow. U .S. AgentSignature: Date:2024/06/13 Signed by(Printed Name/Title):DavidWu /CEO The Applicant acknowledgesthat theymustmaintainan agentfor noless than one year after terminating all marketing andimportationOR the conclusionofany Commission-relatedproceedinginvolving the equipment.The applicantfurtheracknowledgestheir responsibility toinformthe FCCwheneverthe DesignatedU.S. Agentinformationabove changes. A pplicant Companyname: WuxiAuto-linkworldInformationTechnologyCo., Ltd Grantee Code: 2BBDI FRN:0033817115 FCCID: 2BBDIVBK30C21 Contact Name: Bing Wang StreetAddress:No. 2, GaokaiRoad,Economic Development Zone, City/Province/Zip:WuxiCity,JiangsuProvince,China Telephone No: 886-15951118155 Email:[email protected] Applicant Signature: Date:2024/06/13 Signed by(Printed Name/Title):BingWang

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Wuxi Auto-link world Information Technology Co., Ltd Address No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province, China FRN 0033817115 Grantee Code 2BBDI FCC ID 2BBDIVBK30C21 Authorized Contact Name Bing Wang Contact Email [email protected] Contact Phone 886-15951118155 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Wuxi Auto-link world Information Technology Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Wuxi Auto-link world Information Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2024/06/11 Print Name: Bing Wang Title: *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Wuxi Auto-link world Information Technology Co., Ltd Date: 2024/06/11 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BBDIVBK30C21 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Wuxi Auto-link world Information Technology Co., Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Bing Wang Title: Signature: On behalf of Company: Wuxi Auto-link world Information Technology Co., Ltd Telephone: 886-15951118155

Wuxi Auto-link world Information Technology Co., Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Company Name: Wuxi Auto-link world Information Technology Co., Ltd. Address: No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province, China Regarding: Confidentiality Request regarding application for FCC ID: 2BBDIVBK30C21 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions NII Software Security Info The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Bing Wang Title: Company Name; Wuxi Auto-link world Information Technology Co., Ltd

Compliance Certification Services (Kunshan) Inc. Page: 1 of 4 External Photos for KSCR2404000738AU Test Model No.: 30C21 Compliance Certification Services (Kunshan) Inc. Page: 2 of 4 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 4 Compliance Certification Services (Kunshan) Inc. Page: 4 of 4

Compliance Certification Services (Kunshan) Inc. Page: 1 of 9 Internal Photos for KSCR2404000738AU Test Model No.: 30C21 Compliance Certification Services (Kunshan) Inc. Page: 2 of 9 EUT Constructional Details (EUT Photos) Compliance Certification Services (Kunshan) Inc. Page: 3 of 9 Compliance Certification Services (Kunshan) Inc. Page: 4 of 9 Compliance Certification Services (Kunshan) Inc. Page: 5 of 9 Compliance Certification Services (Kunshan) Inc. Page: 6 of 9 Compliance Certification Services (Kunshan) Inc. Page: 7 of 9 Compliance Certification Services (Kunshan) Inc. Page: 8 of 9 Compliance Certification Services (Kunshan) Inc. Page: 9 of 9

Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240400073805 Page: 1 of 12 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) 1 Cover Page RF Exposure Evaluation Report Application No.: KSCR2404000738AU FCC ID: 2BBDIVBK30C21 Applicant: Wuxi Auto-link world Information Technology Co., Ltd. Address of Applicant: No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province, China Manufacturer: Wuxi Auto-link world Information Technology Co., Ltd. Address of Manufacturer: No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province, China Factory: Wuxi Auto-link world Information Technology Co., Ltd. Address of Factory: No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province, China Equipment Under Test (EUT): EUT Name: Telematics Headunit Model No.: 30C21 Trade Mark: Standard(s) : FCC Rules 47 CFR §2.1091 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2024-04-28 Date of Test: 2024-04-29 to 2024-05-29 Date of Issue: 2024-05-30 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240400073805 Page: 2 of 12 Revision Record Version Description Date Remark 00 Original 2024-05-30 / Authorized for issue by: Tested By Maker Qi /Project Engineer Approved By Terry Hou /Reviewer Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240400073805 Page: 3 of 12 2 Contents Page 1 Cover Page .................................................................................................................................. 1 2 Contents ...................................................................................................................................... 3 3 General Information..................................................................................................................... 4 3.1 General Description of E.U.T. ................................................................................................ 4 3.2 Details of E.U.T. .................................................................................................................... 4 3.3 Test Location ........................................................................................................................ 6 3.4 Test Facility ........................................................................................................................... 6 4 FCC Radiofrequency radiation exposure limits ......................................................................... 7 4.1 Blanket 1 mW Blanket Exemption .......................................................................................... 7 4.2 MPE-based Exemption .......................................................................................................... 7 4.3 SAR-based Exemption .......................................................................................................... 8 5 Measurement and Calculation .................................................................................................. 10 5.1 Maximum transmit power .................................................................................................... 10 5.2 RF Exposure Calculation ..................................................................................................... 12 Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240400073805 Page: 4 of 12 3 General Information 3.1 General Description of E.U.T. Power supply: DC 12V 3.2 Details of E.U.T. BT Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK, pi/4DQPSK, 8DPSK Number of Channels: 79 Channel Spacing: 1MHz Spectrum Spread Technology: Frequency Hopping Spread Spectrum(FHSS) Antenna Type: Internal antenna Antenna Gain: 1.71dBi (Provided by the manufacturer) BLE Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: Internal antenna Antenna Gain: 1.71dBi (Provided by the manufacturer) 2.4G Operation Frequency: 802.11b/g/n(HT20): 2412MHz to 2462MHz Modulation Type: 802.11b: DSSS (CCK, DQPSK, DBPSK);802.11g/n: OFDM (64QAM, 16QAM, QPSK, BPSK) Number of Channels: 802.11b/g/n(HT20):11 Channel Spacing: 5MHz Antenna Type: Internal antenna Antenna Gain: 2.79dBi (Provided by the manufacturer) Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240400073805 Page: 5 of 12 5G Operation Frequency/Number of channels (20MHz): 5180-5240MHz (4 Channels); U-NII-3: 5745-5825MHz (…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 1 of 28 ANTENNA PASSIVE TEST REPORT Application No. SEWA2303000034OA Applicant Bosch Automotive Products (Suzhou) Co., Ltd Manufacturer Bosch Automotive Products (Suzhou) Co., Ltd Product Name Vehicle Cockpit Model No Chery IDC Standards IEEE Std 149 ™ -2021 Date Initial Sample(s) Received 2023.03.10 Testing Start Date 2023.03.10 Testing Finish Date 2023.03.10 Report Issue Date 2023.03.24 Comments/ Conclusion: The configuration tested complied to the certification requirements specified in this report. Leno Shi Caleb Gao Panta Sun Antenna Test Engineer Antenna Test Supervisor Wireless Operation Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 2 of 28 REVISION HISTORY Report No. Version Date Memo SEWA2303000034OA01 01 2023/03/24 The final version of report SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 3 of 28 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................. 4 1.1 DETAILS OF CLIENT .................................................................... 4 1.2 TEST LOCATION ......................................................................... 4 1.3 GENERAL DESCRIPTION OF EUT ............................................... 5 1.4 TEST PROCEDURE ........................................................................ 5 1.5 LABORATORY ENVIRONMENT .................................................... 5 2. OTA MEASUREMENTS SYSTEM CONFIGURATION ...................... 6 2.1 TEST CONFIGURATION ................................................................. 6 2.2 TEST MEASUREMENT .................................................................... 6 3. TEST EQUIPMENT LIST .................................................................. 7 4. MEASUREMENT UNCERTAINTY ................................................... 8 5. TEST RESULTS ................................................................................ 9 5.1 WI-FI ANTENNA ........................................................................... 9 5.2 BT ANTENNA ............................................................................... 12 6. 3-D ANTENNA PATTERN ............................................................... 15 6.1 WI-FI ANTENNA .......................................................................... 15 6.2 BT ANTENNA ............................................................................... 21 7. EUT AND TEST CONFIGURATION ................................................ 27 SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 4 of 28 1. General Information 1.1 Details of Client Applicant Bosch Automotive Products (Suzhou) Co., Ltd Address: No. 455, Xinglong Street, Suzhou Industrial Park, Jiangsu, China Manufacturer Bosch Automotive Products (Suzhou) Co., Ltd Address: No. 455, Xinglong Street, Suzhou Industrial Park, Jiangsu, China 1.2 Test Location Company SGS-CSTC Standards Technical Service（Suzhou）Co., Ltd. Address South of No. 6 Plant, No. 1, Runsheng Road, Suzhou Industrial Park, Suzhou Area, China (Jiangsu) Pilot Free Trade Zone Post Code 215000 Telephone +86(0)512-62990300 Fax +86(0)512-62990300 SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 5 of 28 1.3 General Description of EUT Device Description: Vehicle Cockpit Device Manufacturer: Bosch Automotive Products (Suzhou) Co., Ltd Device Model: Chery IDC Hardware Version: N/A Software Version: N/A 1.4 Test Procedure Testing is performed according to the IEEE Std 149 ™ -2021 1.5 Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz > 100dB Ground resistance <0.5 SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 6 of 28 2. OTA Measurements System Configuration 2.1 Test Configuration Conical-Cut method is used to measure the antenna 3D GAIN of EUT in OTA qualified anechoic chamber. Equipment Under Test (EUT) geometry centre vertical projection at the centre of platform, the distance from EUT to measurement antenna is 1.5m 2.2 Test Measurement Spherical coordinate system SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 7 of 28 3. Test Equipment List Type of Equipment Model Number Manufacture Calibration Date Valid Period Network Analyzer ZNB8 S/N 103535 R&S 2023-02-06 2024-02-05 Switch Control System OSP 130 S/N 100358 R&S N/A N/A MAPS Controller 2090 S/N 114576 ETS-Lindgren L.P. N/A N/A Test Software EMQuest™ REV 1.14 Build 31654 ETS-Lindgren L.P N/A N/A Full Anechoic Wireless Test chamber ETS-Lindgren AMS- 8923 CT000596-1149 ETS-Lindgren L.P N/A N/A SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 8 of 28 4. Measurement Uncertainty SGS-CSTC Standards Technical Service （Suzhou）Co., Ltd. Report No.:SEWA2303000034OA01 Rev.01 Page: 9 of 28 5. Test Results 5.1 Wi-Fi Antenna Frequency(MHz) Ga…

Text truncated - open the document above for the full version.

Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240400073803 Page: 1 of 92 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) TEST REPORT Application No.: KSCR2404000738AU FCC ID: 2BBDIVBK30C21 Applicant: Wuxi Auto-link world Information Technology Co., Ltd. Address of Applicant: No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province, China Manufacturer: Wuxi Auto-link world Information Technology Co., Ltd. Address of Manufacturer: No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province, China Factory: Wuxi Auto-link world Information Technology Co., Ltd. Address of Factory: No. 2, Gaokai Road, Economic Development Zone, Wuxi City, Jiangsu Province, China Equipment Under Test (EUT): EUT Name: Telematics Headunit Model No.: 30C21 Trade Mark: Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2024-04-28 Date of Test: 2024-04-29 to 2024-05-29 Date of Issue: 2024-05-30 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240400073803 Page: 2 of 92 Revision Record Version Description Date Remark 00 Original 2024-05-30 / Authorized for issue by: Tested By Maker Qi /Project Engineer Approved By Terry Hou /Reviewer Compliance Certification Services (Kunshan) Inc. CCSEM-TRF-001 Rev. 02 Sep 01, 2023 Report No.: KSCR240400073803 Page: 3 of 92 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) N/A Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (201…

Text truncated - open the document above for the full version.