2BBZE-I03WIRELESS CAR CHARGER

WIRELESS CAR CHARGER YOUR BEST DRIVE PARTNER User Manual Clean the car dashboard and install the dashboard pad on a flat surface, make sure to press it hard & thoroughly for more than 20 seconds and let it sit at least 24 hours before use. Adjust the arm for an appropriate position and set the stabilizer as close as the ball joint. Note: The suitable with air vent Compatible with 99% horizontal and vertical air vent types. 24h Stabilizer 24h How to wireless charge your phone? Step 1: Connect the phone mount with the QC 3.0 car charger (included) by the Type C cable, and insert the charger into the cigarette lighter. Step 2: After the product is powered on the clamp arm will automatically open. Put your mobile phone on it, the mount will auto-locate, clamp and charge your cellphone. Press the left or right button if you need to take out the phone. Dear Customer please do not hesitate to contact us at anytime If you have any question We are alw ays here if you need! NOTE: For long-lasting bond, press 8-10s and wait at least 24 hours before using. Step 3 Install the wireless car charger mount as shown and tighten the nut. Step 4 Step 1 Install the suction cup as shown and press down the lock lever. Step 2 INSTALLATION GUIDE Step1: Lift carefully the dashboard pad. Step2: Use a thin plastic card to slowly separate the adhesive from the dashboard. Remove Dashboard Disk PadFCC Warning Statement Lift it up Note for Dashboard Pad NOTE : ① For NOT SMOOTH surface, use the 3M dashboard pad ② Not compatible with leather or vinyl dashboard ③ Avoid dust, oil, fingerprints ④ When applying, the car interior temperature should be ≥ 68°F ⑤ Maintained for ≥ 25 minutes ⑥ Press 8-10 seconds ⑦ Use after 24 hours of pasting Recommend charging distance: ≤ 4mm Input: 5V/2A, 9V/2A, 12V/2A (QC3.0) Output: 5W/7.5W/10W/15W (MAX) Applicable device: 4.7-6.9 inches mobile phone with wireless charging function Product Parameters Product Parameters 1. Please connect the product with the QC 3.0 car charger included in package by cable to achieve fast charge. 2. To ensure the efficiency and stability of charging, the wireless charging distance should be ≤4mm. Please avoid using metal, MagSafe or thick phone cases. 3. Click any button on the left or right to take out the phone. If the phone is not taken out within 5s, the product will automatically clamp the phone again. 4. If FOD (foreign object detection) is triggered in the working state, the indicator light will flicker red light, and the wireless charging will stop, with the clamp arm remaining closed. Notice Notice 01 06070805 020304 型号：i03-S1-AV6S 尺寸：55x85 mm 材质：128g 双面铜版纸 This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This equipment must be installed and operated with a minimum distance of 15 cm between the radiator and user body.

DON Section Company n Address: 2- DONGGUA Product Na FCC ID: 2B Model(s): i0 2.911(d)(5 ) We, [DONG of the date List” NOTE 2 ,e communica Yours sinc e Name: Pe n Title: Gene Company n Signature: NOTE 1 Delete option NOTE 2 “Covered List https://www.f c References; 1) 986446 D 0 https://apps.fc 2) Federal R e https://www.fe munications-s NGGUAN 2.911(d) name: DON -3/F, A Blk, AN, China ame: WIREL BBZE-I03 03 )(ii) Applica GGUAN JIN of the filing established ations equip erely, ngcheng Du ral Manage name: DON not applicable ”; is the List o cc.gov/supplyc 01 Covered Eq cc.gov/oetcf/kd egister docume ederalregister. supply-chain-t N JINCH )(5)(ii) Ce NGGUAN JIN NO.2 LONG LESS CAR ant filing NCHI ELECT g of the appl pursuant to pment. u er NGGUAN JI e to this applic of Equipment a chain/covered quipment v01 db/forms/FTS ent 2022-2826 gov/documen hrough-the HI ELEC ertificatio NCHI ELEC GTONG RD CHARGER TRONIC TE lication, the o §1.50002 NCHI ELE C cation. and Services C list SearchResul t 63 published o nts/2023/02/06 CTRONIC on – App CTRONIC T D, XINHE C R ECHNOLOG e applicant i of this cha p CTRONIC T Covered By S tPage.cfm?sw on 02/06/23 6/2022-28263/ C TECH plicant (C TECHNOLO ONMMUNI GY CO., LT s not ident pter, as an e D TECHNOLO ection 2 of Th witch=P&id=32 /protecting-ag HNOLOG 2.911 (d)(5 Covered L OGY CO., LT TY, WANJIA TD] (“the app tified NOTE 1 o entity produ Date: Jul. 10 OGY CO., LT e Secure Netw 5672 ainst-national - GY CO., 5)(ii) Applicant A List ) TD ANG DISTR plicant”) cer on the “Cove ucing covere 0, 2023 TD works Act, ava -security-threa , LTD Attestation v1.3 RICT, rtify that, as ered ed ailable at ats-to-the-com 3 s m

Co m Ad d DON Pr o Mo d Pr o We act We an d issu our Sig Na m Title Com D mpany: DO dress: 2-3/F NGGUAN, C oduct Name del Numbe oduct Desc authorize M on our beha declare tha d certificatio ues concern behalf shal nature: me: e: mpany: ONGGUAN ONGGUAN JI F, A Blk, NO. hina e: WIRELES er(s): i03 ription: WIR MiCOM Lab alf on all ma at MiCOM L n of equipm ning the app ll have the s Pengcheng General Ma DONGGUA N JINCHI E Agen INCHI ELEC .2 LONGTON SS CAR CHA RELESS CA bs Inc., 575 atters conce Labs Inc. is ment to the r proval applic same effect g Du anager AN JINCHI E ELECTRO nt Auth CTRONIC TE NG RD, XINH ARGER AR CHARGE Boulder Co erning the c allowed to f regulatory a cation. Any t as acts of ELECTRONIC ONIC TECH horizat ECHNOLOGY HE CONMM R ourt, Pleasa certification forward all i agencies as and all acts our own. C TECHNOL HNOLOGY tion Y CO., LTD UNITY, WA N anton, Califo of above na information s required a s carried ou Date: LOGY CO., L CO., LTD NJIANG DIS ornia 94566 amed equip related to t nd to discu ut by MiCOM Jul. 10, 202 LTD TRICT, 6, USA, to pment. the approva ss any M Labs on 23 al

DON Office o Federa 7435 O Columb USA Subjec t FCC ID To Wh o Pursua are req u docume These d propriet might b In addi t in Title busine s authoriz For 4 O For 1 It is ou r corresp docume authoriz Sincer e Signatu Name: Title: G NGGUA of Engineeri l Communic Oakland Mills bia, MD 210 t; Request f D: 2BBZE-I0 om It May C nt to the pro uesting the ents from pu documents tary informa be harmful to Schemat Block Di Parts Lis Operatio Tune-up tional to abo 47 CFR §2 ss sensitive zed devices External Test Set Internal P User Ma 45 days, pu OR 180 days pu r understand pondence du ents and thi zation is iss ely, ure: Pengchen g eneral Man AN JINC ing Techno cations Com s Road 046 for Confiden 03 Concern, ovisions of t Commissio ublic disclos contain det ation in ope o our comp tic Diagram agram st onal Descrip Procedure ove mention .803 and th informatio n s, we reque Photos tup Photos Photos anual rsuant to P u ursuantto KD ding that all uring the ce s informatio sued. g Du nager CHI ELE logy mmission ntiality the Commis on to withho sure indefin tailed syste ration of th e any and wo m ption ned docume e importatio n remains c st Short Te ublic Notice DB 726920 l measurem ertification re on will be av CTRON ssion’s rule old the follow nitely. m and equi e equipmen ould give co ents, in orde on rules in T confidential rm Confide e DA 04-170 0 D01. ment test rep eview proce vailable for NIC TEC s Title 47 S wing attach pment desc nt. The publ ompetitors a er to comply Title 47 CFR until the act ntiality of th 05. ports, FCC ess cannot public revi e CHNOLO Sections §0. hment(s) as criptions an ic disclosu r an unfair ad y with the m R §2.1204, tual market he following ID label for be granted ew once the OGY CO Date: Jul. 1 457 and §0 confidentia d are consi re of these d vantage in marketing re while ensu ting of newly attachmen mat and as confide n e grant of eq O., LTD 10, 2023 0.459, we al dered as documents the market . egulations ring that y t(s); ntial quipment .

Annex A External Photos Report No.:HK2306282730-1E/2E Page 1 of 3 Report No.:HK2306282730-1E/2E Page 2 of 3 Report No.:HK2306282730-1E/2E Page 3 of 3

FCC ID LABEL: Ca. 10mm x 20mm Label Location FCC ID: 2BBZE‐I03

Annex B Internal Photo Report No.:HK2306282730-1E/2E Page 1 of 3 Report No.:HK2306282730-1E/2E Page 2 of 3 Coil Antenna Report No.:HK2306282730-1E/2E Page 3 of 3

Page 1 of 11 Report No.: HK2306282730-2E FCC Test Report Test report On Behalf of DONGGUAN JINCHI ELECTRONIC TECHNOLOGY CO., LTD For WIRELESS CAR CHARGER Model No.: i03 FCC ID: 2BBZE-I03 Prepared For : DONGGUAN JINCHI ELECTRONIC TECHNOLOGY CO., LTD 2-3/F, A Blk, NO.2 LONGTONG RD, XINHE CONMMUNITY, WANJIANG DISTRICT, DONGGUAN, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jun. 28, 2023 ~ Jul. 10, 2023 Date of Report: Jul. 10, 2023 Report Number: HK2306282730-2E Page 2 of 11 Report No.: HK2306282730-2E Test Result Certification Applicant’s Name ................. : DONGGUAN JINCHI ELECTRONIC TECHNOLOGY CO., LTD Address.................................. : 2-3/F, A Blk, NO.2 LONGTONG RD, XINHE CONMMUNITY, WANJIANG DISTRICT, DONGGUAN, China Manufacture's Name ............ : DONGGUAN JINCHI ELECTRONIC TECHNOLOGY CO., LTD Address.................................. : 2-3/F, A Blk, NO.2 LONGTONG RD, XINHE CONMMUNITY, WANJIANG DISTRICT, DONGGUAN, China Product Description Trade Mark ................................ : Product Name ........................... : WIRELESS CAR CHARGER Model and/or type reference : i03 Standards ............................. : FCC CFR 47 PART 18, KDB 680106 D01 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : Jun. 28, 2023 ~ Jul. 10, 2023 Date of Issue ........................................... : Jul. 10, 2023 Test Result ............................................... : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 11 Report No.: HK2306282730-2E Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User's Manual. 2. Channel List Channel Frequency (KHz) Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 01 112 The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. 2. Summary of Test Results 2.1. Test procedures according to the technical standards: FCC KDB 680106 D01 RF Exposure Wireless Charging Apps v03r01 FCC CFR 47 Standard Section Test Item Judgment Remark FCC CFR 47 part1, 1.1310 KDB 680106 D01v03r01 (3)(3) Electric Field Strength (E) (V/m) PASS Magnetic Field Strength (H) (A/m) PASS 2.2. Measurement Uncertainty The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 All Emissions, Radiated(<30M)(9KHz-30MHz) ±3.90dB 2 Temperature ±0.5°C 3 Humidity ±2% Page 4 of 11 Report No.: HK2306282730-2E 2.3. Test Instruments Description Brand Model No. Frequency Range Calibrated Date Calibrated Until Exposure Level Te s t e r narda NBM-520B-0324 Feb. 17, 2023 Feb. 16, 2024 Magnetic field probe 100cm 2 narda EF 0391 A-0486 Feb. 17, 2023 Feb. 16, 2024 NOTE: 1. The calibration interval of the above test instruments is 12 months. Page 5 of 11 Report No.: HK2306282730-2E 3. Maximum Permissible Exposure Limit of Maximum Permissible Exposure Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180 / f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1 30 Note 1: f = frequency in MHz ; *Plane-wave equivalent power density. Note 2: For the applicable limit, see FCC 1.1310, 680106 D01 RF Exposure Wireless Charging Apps v03. Note 3: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63A/m. A KDB inquiry is required to determine the applicable exposure limits below 100 kHz. Page 6 of 11 Report No.: HK2306282730-2E 4. Test Procedure a. For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of (H-field & E- field strengths for all sides is 15cm, H-field strengths of top side is 20cm). E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. 4.1 Test Setup 4.2 Result of Maximum Permissible Exposure Page 7 of 11 Report No.: HK2306282730-2E All test modes are tested, and the report shows only the worst mode: 15W For Full load： H-Field Strength at 15 cm (E top side: 20cm) from the edges surrounding the EUT (A/m) Field strength Test Position A Test Position B Test Position C Test Position D Test Position E Limits (A/m) uT 0.216 0.257 0.229 0.217 0.196 / A/m 0.173 0.206 0.183 0.174 0.157 1.63 Note. Calculation: A/m=uT/1.25 For Half Load mode: H-Field Strength at 15 cm (E top side: 20cm) from the edges surrounding the EUT (A/m) Field strength Test Position A Test Posi…

Text truncated - open the document above for the full version.

Page 1 of 21 Report No.: HK2306282730-1E FCC Test Report Test report On Behalf of DONGGUAN JINCHI ELECTRONIC TECHNOLOGY CO., LTD For WIRELESS CAR CHARGER Model No.: i03 FCC ID: 2BBZE-I03 Prepared For : DONGGUAN JINCHI ELECTRONIC TECHNOLOGY CO., LTD 2-3/F, A Blk, NO.2 LONGTONG RD, XINHE CONMMUNITY, WANJIANG DISTRICT, DONGGUAN, China Prepared By : Shenzhen HUAK Testing Technology Co., Ltd. 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Date of Test: Jun. 28, 2023 ~ Jul. 10, 2023 Date of Report: Jul. 10, 2023 Report Number: HK2306282730-1E Page 2 of 21 Report No.: HK2306282730-1E Test Result Certification Applicant’s Name ................. : DONGGUAN JINCHI ELECTRONIC TECHNOLOGY CO., LTD Address.................................. : 2-3/F, A Blk, NO.2 LONGTONG RD, XINHE CONMMUNITY, WANJIANG DISTRICT, DONGGUAN, China Manufacture's Name ............ : DONGGUAN JINCHI ELECTRONIC TECHNOLOGY CO., LTD Address.................................. : 2-3/F, A Blk, NO.2 LONGTONG RD, XINHE CONMMUNITY, WANJIANG DISTRICT, DONGGUAN, China Product Description Trade Mark ................................ : Product Name ........................... : WIRELESS CAR CHARGER Model and/or type reference : i03 Standards ............................. : FCC CFR 47 PART 18 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen HUAK Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen HUAK Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Date of Test ............................................ : Date (s) of performance of tests ............. : Jun. 28, 2023 ~ Jul. 10, 2023 Date of Issue ........................................... : Jul. 10, 2023 Test Result ............................................... : Pass Testing Engineer : (Gary Qian) Technical Manager : (Eden Hu) Authorized Signatory : (Jason Zhou) Page 3 of 21 Report No.: HK2306282730-1E Table of Contents Page 1 . Test Summary 5 1.1 . Test Procedures and Results 5 1.2 . Information of the Test Laboratory 5 1.3 . Measurement Uncertainty 5 2. General Information 6 2.1. General Description of EUT 6 2.2. Carrier Frequency of Channels 7 2.3. Operation of EUT during Testing 7 2.4. Description of Test Setup 8 2.5. Measurement Instruments List 9 3. Conducted Emission Test 10 3.1. Block Diagram of Test Setup 10 3.2. Conducted Power Line Emission Limit 10 3.3. Test Procedure 10 4. Radiated Emissions 13 4.1. Block Diagram of Test Setup 13 4.2. Rules and Specifications 14 4.3. Test Procedure 14 4.4. Test Result 14 5. Antenna Requirement 18 6. Photograph of Test 19 7. Photos of the EUT 21 Page 4 of 21 Report No.: HK2306282730-1E ** Modified History ** Revision Description Issued Data Remark Revision 1.0 Initial Test Report Release Jul. 10, 2023 Jason Zhou Page 5 of 21 Report No.: HK2306282730-1E 1. Test Summary 1.1. Test Procedures and Results Description of Test Section Number Result Conducted Emissions Test 18.307 COMPLIANT Radiated Emission Test 18.305 COMPLIANT Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. 1.2. Information of the Test Laboratory Shenzhen HUAK Testing Technology Co., Ltd. Add.: 1-2/F., Building B2, Junfeng Zhongcheng Zhizao Innovation Park, Heping, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Testing Laboratory Authorization： A2LA Accreditation Code is 4781.01. FCC Designation Number is CN1229. Canada IC CAB identifier is CN0045. CNAS Registration Number is L9589. 1.3. Measurement Uncertainty Measurement Uncertainty Conducted Emission Expanded Uncertainty =2.71dB, k=2 Radiated emission expanded uncertainty(9kHz-30MHz) = 3.90dB, k=2 Radiated emission expanded uncertainty(30MHz-1000MHz)= 3.90dB, k=2 Radiated emission expanded uncertainty(Above 1GHz) = 4.28dB, k=2 Page 6 of 21 Report No.: HK2306282730-1E 2. General Information 2.1. General Description of EUT Equipment: WIRELESS CAR CHARGER Model Name: i03 Series Models: N/A Model Difference: N/A Trade Mark: FCC ID: 2BBZE-I03 Antenna Type: Coil Antenna Antenna Gain: 0dBi Operation Frequency: 112KHz~205KHz Test Frequency: 112KHz Number of Channels: 1 Modulation Type: ASK Power Source: Input: 5V/2A, 9V/2A, 12V/2A Wireless Output: 5W/7.5W/10W/15W(MAX) Power Rating: Input: 5V/2A, 9V/2A, 12V/2A Wireless Output: 5W/7.5W/10W/15W(MAX) Page 7 of 21 Report No.: HK2306282730-1E 2.2. Carrier Frequency of Channels Operation Frequency each of channel Channel Frequency 1 112KHz 2.3. Operation of EUT during Testing Operating Mode The mode is used: Transmitting mode Page 8 of 21 Report No.: HK2306282730-1E 2.4. Description of Test Setup Operation of EUT during Testing: AC Plug Adapter information Model: CD289 Input: 100-240V, 50/60Hz, 2A USB-C1 Output: 5V, 3A/9V, 3A/12V, 3A/15V, 3A/20V, 5A/28V, 5A 140W Max The sample was placed (0.8m (30MHz~1GHz), 0.8m (9KHz~30MHz)) above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. The worst case is X position. Adapter EUT Load Page 9 of 21 Report No.: HK2306282730-1E 2.5. Measurement Instruments List Item Equipment Manufacturer Model No.Serial No. Last Cal. Cal. Interval 1. L.I.S.N. Artifi…

Text truncated - open the document above for the full version.

Radiated Emissions Conducted Emission