2BBZS-B113A01502Bluetooth Control Module

shell 5557-6A 5557-22A 5557-6A Labe the location Total 3 page Page 1 pattern marking weight proportion B Approver Bid reviewer Reviewer ProofreaderPrepared by Specification document Product Code Mode Document No.: B113A-015-2 - PD - A/0 Technical requirements: 1. Status description: R4000iSP-P [MP model, one-touch start + Bluetooth + APP]，product mode:B113A-015-2. 2. The surface of the components should be free of scratches, and there should be no flow pillars in the potting. Contamination of connectors is not allowed; the shell material of the remote control module is PA6, and the potting material is polyurethane.3. Controller operating voltage: DC8V~60V; standby current <25mA, power-off current <500uA; operating ambient temperature -20°C~+85°C; Bluetooth version: BLE4.0 or above. 4. Dimensions without specified tolerances should comply with QRT JJ1.2-2007; customer model: 30008-YJF01. 5. On the R4000iEPN-PX (201217) model, the following functional requirements must be met: 1) When the machine is connected to the battery SAE interface, the Bluetooth control module should be in a power-off state. Not working: power-off current consumption <500uA; 2) The automatic power-off time is 24 hours. When the machine is in a power-off state, press 5S > one-touch switch ≥1S to enter standby mode, and the one-touch indicator light starts flashing green, with an interval of 1 second on/1 second off. Test the voltage across the gasoline solenoid valve and gas solenoid valve in standby mode, and both solenoid valves should not be energized; if there is no operation (including manual start) to start the generator within 24 consecutive hours, the machine's Bluetooth module will automatically power off; 3) When the module is in special machine mode, the mobile phone APP can connect to the machine's Bluetooth, and after successful connection, the Bluetooth indicator light on the display illuminates; 4) In special machine mode: the multimeter DC current range measures the current consumption of the special machine to be <25mA; 5) Whether the battery is removed or not, if the machine is operating normally, it should be able to be stopped (the charging module needs to supply power to the Bluetooth module) through the APP; 6) Any normal or abnormal ignition (LPG gas run out, gasoline run out, low oil, misfire, etc.) unrelated to Bluetooth module control should cause the Bluetooth module to enter standby mode after flameout. The one-touch indicator light starts flashing green, with an interval of 1 second on/1 second off; 7) Each time entering special machine mode from power-off mode. Regardless of the throttle position, the carburetor throttle should automatically open to the fully open position. (Note: The throttle does not automatically open when the Bluetooth module is powered on. Without the battery, the throttle lever is manually operated. After manual activation, the throttle cannot automatically open.) 8) Throttle Button Function Test: In standby mode, press the throttle button on the INT5FINV display to rotate the carburetor throttle to close it by 90 degrees, fully closing the throttle. At this point, the throttle indicator light is constantly green. Press the throttle button again; the carburetor throttle rotates in reverse to open it by 90 degrees, fully opening the throttle. The throttle indicator light status should correspond to the throttle action status. When the throttle is not fully opened, the throttle indicator light should be constantly green. 9) One-Button + APP Remote Start Test - In standby mode, if in "Gasoline" mode: The user slides the START button or presses and holds the one-button switch for at least 1 second in the mobile app to control the engine start. The throttle is automatically controlled to open and close during startup. If the start fails, it will continue to attempt the next start. Up to six attempts will be made. If the engine fails to start after six attempts, the start process stops and returns to standby mode. During the start process, the working indicator light continues to flash. The flashing interval is 0.5 seconds on/0.5 seconds off. During the APP remote start process, the Bluetooth indicator light also continues to flash. The flashing interval is 0.5 seconds on/0.5 seconds off. After successful start, the Bluetooth indicator light turns off, and the one-button switch working indicator light is constantly green. At this point, the carburetor gasoline solenoid valve and LPG/NG gas solenoid valve are not powered on and do not operate. If the Bluetooth app is connected at this point, entering the Dashboard shows the status as Gasoline running. Gasoline automatic throttle strategy (see attached table for details): If in "LPG" mode: The user slides the START button or presses and holds the one-button switch for at least 1 second in the mobile app to control the engine start. The carburetor gasoline solenoid valve and LPG gas solenoid valve are controlled to power on and guide the current 1 second before the starter motor action, then the engine starter motor is controlled to work. During startup, the Bluetooth module automatically controls the throttle to open and close. If the start fails, it will continue to attempt the next start. Up to six attempts will be made. If the engine fails to start after six attempts, the start process stops, and the Bluetooth module controls the carburetor gasoline solenoid valve and LPG/NG gas solenoid valve to power off and not operate, returning tostandby mode. During the start process, the working indicator light continues to flash. The flashing interval is 0.5 seconds on/0.5 seconds off. During the remote start process via the APP, the Bluetooth indicator blue light will also continue to flash. The flashing interval is 0.5 seconds on/0.5 seconds off; after successful start, the Bluetooth indicator blue light turns off, and the one-button switch working indicator green light stays on: at this time, the carburetor gasoline solenoid …

Text truncated - open the document above for the full version.

3/18 Fed Auth 7435 Colu USA AT T FCC Cho equi rece Ch o the d (as a prod Ch o equi softw assi suc c and Sig n Prin Titl e Com Date Co 8/2026 eral Comm u horization a 5 Oakland M umbia, MD 2 A TN.: Review C ID: 2BBZS ongqing Jan ipment for w eiving an eq Note: If any of t h include ongqing Jan date of the f a specificall ducing “cove ongqing Jan ipment for w ware produc gnees, inclu cessors and KDB 98644 ned: ted name: X e: Engineer mpany Name e: 3/18/2026 Chongq overed Eq unications C nd Evaluatio Mills Road 21046 wing Engin S-B113A015 xin Intellige which autho quipment au the equipm he entities id an explanat xin Intellige filing of the ly named en ered” equip xin Intellig e which autho ced or prov uding equip d assignees 46 D01 Cov Xingjian Hua e: Chongqin 6 qing Janxin quipment Commission on Division neer 502 ent Instrume orization is s thorization ent for whi c dentified on tion on why ent Instrume application ntity or any ment. ent Instrume orization is s ided by Ka pment with in s) cybersecu vered Equip ang ng Janxin In Intelligent I t Certifica n ents Co., Ltd sought is no pursuant to ch the applic n the current y the equipm ents Co., Ltd , the applica of its subsid ents Co., Ltd sought does spersky Lab ntegrated K urity or anti- ment Guid a ntelligent Ins Instruments ation Attes d. (“the appl t “covered” section 2. 9 cant seeks a t Covered L ment is not “ d. (“the appl ant is not ide diaries or af d. (“the appl s not include b, Inc. or an Kaspersky L virus softwa ance section struments C s Co., Ltd. station Le icant”) certi equipment 903 of the F authorizatio List, the app covered” eq icant”) certi entified on t ffiliates) as a icant”) certi e cybersecu ny of its succ Lab, Inc. (or are pursuan n B(2a). Co., Ltd. etter fies that the prohibited f CC rules. on is produc plicant shoul quipment. fies that, a s the Covered an entity fies that th e urity or anti- cessors and r any of its nt to DA-24- e from ced by ld s of d List e -virus d 886

Marc Fede Auth 7345 Colu On o C, 1s Villa to ac that certi f defin labe For i beha for c Co. Dist <Sig n Name Title： Applic ch 18, 2026 eral Commu horization & 5 Oakland M umbia, Mary our behalf, I st Floor, Blo ge, Nansha ct as our age submitted d fication is so ned in the Fe l identical to instances w alf, I acknow certification, , Ltd./ Xi trict, Cho nature>： e：Xingjian Engineer cant Compa 6 unications C Evaluation D Mills Road land 21046 appoint She ock B, Jun X n District, S ent in the pr documents p ought. I also ederal Comm o that submit where our au wledge that still resides anfeng I n ongqing, Huang any：Chong ommission Division Author i enzhen Time Xiang Da Bui henzhen, C reparation of properly desc o certify that munications tted for appr uthorized ag all responsi with C h o n ndustrial China gqing Janxi ity to Act as eway Testin ilding, Zhon hina (Name f this applica cribe the de each unit m s Commissio roval with th ent signs th ibility for com ngqing Ja Zone, Xi n Intelligent s Agent ng Laborator gshan Park of Agent co ation for equ evice or syst manufactured on’s regulatio his applicatio he applicatio mplying with anxin Inte anfengTo t Instrumen ries/ Zone C Road West ompany nam uipment cert em for which d, imported ons will hav on. on for certific h the terms elligent In own, Jian ts Co., Ltd. C, 1st Floor, t, Tong Le me and addr tification. I c h equipme n or marketed ve affixed to cation on ou and conditio nstrumen ngjin Zone ress) ertify t d, as it a ur ons ts

March 18, 2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BBZS-B113A01502 Product Name: Bluetooth Control Module Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential: • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature>： Name：Xingjian Huang Title：Engineer Applicant Company：Chongqing Janxin Intelligent Instruments Co., Ltd.

Model: B113A-015-2 Input: 8V 60V 3A MAX Name: FCCID:2BBZS-B113A01502 IC:35314-B153A0152 Bluetooth Control Module

Label Location

RF Exposure evaluation FCC ID: 2BBZS-B113A01502 According to 447498 D04 Interim General RF Exposure Guidance v01 ERP=Peak Power + Antenna Gain -2.15=-2.35+3.97-2.15=-0.53dBm=0.89mW < 2.8mW (Worst case recorded) Then SAR evaluation is not required

Report No.: TW2601032-02E Applicant: Chongqing Janxin Intelligent Instruments Co., Ltd. Product: Bluetooth Control Module Model No.: B113A-015-2 Trademark: PAEDATOR Test Standards: FCC Part 15.247 Test Result: It is herewith confirmed and found to comply with the requirements set up by ANSI C63.10, FCC Part 15.247 for the evaluation of electromagnetic compatibility Approved By Terry Tang Manager Dated: March 11, 2026 Results appearing herein relate only to the sample tested The technical reports is issued errors and omissions exempt and is subject to withdrawal at SHENZHEN TIMEWAY TESTING LABORATORIES Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China Tel (755) 83448688, Fax (755) 83442996, E-Mail:[email protected] Report No.: TW2601032-02E Page 2 of 63 Date: 2026-03-11 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the SHENZHEN TIMEWAY TESTING LABORATORIES. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the SHENZHEN TIMEWAY TESTING LABORATORIES. to his customer. Supplier or others persons directly concerned. SHENZHEN TIMEWAY TESTING LABORATORIES. will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The SHENZHEN TIMEWAY TESTING LABORATORIES. reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Special Statement： FCC-Registration No.: 744189 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. The acceptance letter from the FCC is maintained in our files. Registration No.: 744189. ISED —Registration No.:5205A The EMC Laboratory has been registered by Certification and Engineering Bureau of ISED for radio equipment testing with Registration No.: 5205A. A2LA (Certification Number:5013.01) The EMC Laboratory has been accredited by the American Association for Laboratory Accreditation (A2LA). Certification Number:5013.01 CAB identifier: CN0033 FCC Designation Number: CN1251 Report No.: TW2601032-02E Page 3 of 63 Date: 2026-03-11 The report refers only to the sample tested and does not apply to the bulk. This report is issued in confidence to the client and it will be strictly treated as such by the SHENZHEN TIMEWAY TESTING LABORATORIES. It may not be reproduced rather in its entirety or in part and it may not be used for adverting. The client to whom the report is issued may, however, show or send it . or a certified copy there of prepared by the SHENZHEN TIMEWAY TESTING LABORATORIES. to his customer. Supplier or others persons directly concerned. SHENZHEN TIMEWAY TESTING LABORATORIES. will not, without the consent of the client enter into any discussion of correspondence with any third party concerning the contents of the report. In the event of the improper use of the report. The SHENZHEN TIMEWAY TESTING LABORATORIES. reserves the rights to withdraw it and to adopt any other remedies which may be appropriate. Test Report Conclusion Content 1.0 General Details ................................................................................................ 4 1.1 Test Lab Details................................................................................................ 4 1.2 Applicant Details.............................................................................................. 4 1.3 Description of EUT ........................................................................................... 4 1.4 Submitted Sample.............................................................................................. 4 1.5 Test Duration................................................................................................... 5 1.6 Test Uncertainty............................................................................................... 5 1.7 Test By.......................................................................................................... 5 2.0 List of Measurement Equipment......................................................................... 6 3.0 Technical Details............................................................................................. 7 3.1 Summary of Test Results..................................................................................... 7 3.2 Test Standards.................................................................................................. 7 4.0 EUT Modification............................................................................................. 7 5.0 Power Line Conducted Emission Test...................................................................... 8 5.1 Schematics of the Test........................................................................................ 8 5.2 Test Method and Test Procedure............................................................................ 8 5.3 Configuration of the EUT.................................................................................... 8 5.4 EUT Operating Condition.................................................................................... 9 5.5 Conducted Emission Limit................................................................................... 9 5.6 Test Result...................................................................................................... 9 6.0 Radiated Emission test...................................................................................... 12 6.1 Test Method and Test Procedure............................................................................ 12 6.2 Configuration of the EUT......…

Text truncated - open the document above for the full version.

FPC天线 型号: BW2.4FNX35-10B1L200 描述: 2.4G/5.8G FPC天线 特性: 2400-2500MHz频率范围 5150-5850MHz频率范围 结构：360º全向辐射 线型：RG1.13 线长：200mm 尺寸：35.2mm x 9.6mm 符合 RoHS & REACH 规定 天线规格书 蝙蝠无线 BAT WIRELESS 1 / 13 Antenna Datasheet www.batwireless.cn 目 录 August-5-2025-A01 2 / 13 蝙蝠无线 BAT WIRELESS www.batwireless.cn 1. 产品描述3 2. 产品规格4 3. 实物图5 4. 尺寸图6 5. 测试设备7-8 6. 性能数据9-10 6.1 电压驻波比9 6.2 回波损耗9 6.3 增益10 6.4 效率10 6.5 天线增益与效率10 7. 辐射模式图11-12 7.1 2D辐射模式图11 7.2 3D辐射模式图12 法律声明： 本着为用户提供更好服务的原则，深圳市蝙蝠无线技术有限公司（下称“蝙蝠无线”）在本手册中将尽可能地为用户 呈现详 实、准确的产品信息。但介于本手册的内容具有一定的时效性，蝙蝠无线不能完全保证该文档在任何时段的时效性与适 用性。 蝙蝠无线有权在没有通知的情况下对本手册上的内容进行更新，恕不另行通知。为了得到最新版本的信息，请尊敬的 用户定时 访问蝙蝠无线官方网站或者与蝙蝠无线工作人员联系。感谢您的包容与支持！ 版权声明：本产品手册所有内容（包括文字、图表、标识及设计）均受著作权法及国际版权条约保护。任何单位和个人未经我 司事先书面授权，不得以任何形式（包括电子、机械、影印等）复制、修改、传播、分发和使用本手册全部或部分内容。侵权 者将承担相应法律责任。保留所有权利。 商标声明：本手册中出现涉及到蝙蝠无线商品名称及企业标识均属我公司（含关联公司）合法所有。严禁任何未经授权的使用、 复制或仿冒行为。手册引用的第三方商标权利归相应权利人所有，其使用仅作说明目的，不构成商业关联或授权暗示。我公司 保留追究侵权法律责任的一切权利。 免责声明：本手册所载产品信息仅供参考，产品实际性能可能因使用环境、配置差异而有所不同。本公司不对手册内容的准确 性、完整性或适用性作任何明示或默示保证，亦不承担因使用或无法使用本手册内容而产生的直接或间接损失。用户应自行评 估产品适用性并遵循实际操作规范。最终解释权归本公司所有。 经典应用场景： 消费电子：蓝牙耳机、智能手表、无人机遥控 工业领域：RFID标签、无线传感器 汽车电子：胎压监测、车载天线 蝙蝠无线BW2.4FNX35-10B1L200是一种广泛应用于无线通信，采用柔性基材，可弯曲、折叠，适应曲面或狭小空间安装。 柔性基材（如聚酰亚胺）使电路能适应复杂空间布局，适用于可穿戴设备、折叠屏手机等。厚度通常为0.1~0.3mm，减轻设备 重量，提升便携性。以高频性能、柔韧性和高集成度为核心优势，是无线设备小型化、高性能化的关键组件。 1. 产品描述 / Description www.batwireless.cn August-5-2025-A01 蝙蝠无线提供定制化服务以优化您的设备，我们拥有成熟的研发团队，能够迅速响应以满足您的需求。如果您有任何要 求，请联系我们的销售和 FAE。 3 / 13 零件编号说明 BW 公司 / Company 蝙蝠无线 / Bat Wireless 2.4 频段 / Frequency 2400-2500MHz，5150-5850MHz F 名称 / Name FPC天线 / FPC Antenna N 类型 / Type 内置 / Internal X 常数 / Constant X / X 35-10 大概尺寸 / Dimensions 35-10mm / 35-10mm B1 接口 / Connector IPEX-1 / IPEX-1 L 线长 / Wire Length 线长 / Wire Length 200 长度 / Length 200 / 200 BW2.4FNX35-10B1L200 蝙蝠无线 BAT WIRELESS 接口 IPEX-1IPEX-2IPEX-3IPEX-4IPEX-5SMA 可选配定制 线长 100150200250300500 可选配定制 线型 RG0.81RG1.13RG1.37RG178RG316 可选配定制 选型表 参数 / Parameters 典型值 / Typ.单位 / Unites 备注 / Notes 类型 / Antenna TypeFPC天线 / FPC Antenna 频率 / Frequency Range2400-2500，5150-5850MHz 输入阻抗 / Input Impendence 50 Ω 驻波比 / V.S.W.R <2 增益 / Gain 2.4G：3.97 5.8G：4.69 dBi 极化方式 / Polarization Type垂直 / Vertical 功率容量 / Power Capacity 50W 雷电保护 / Lightning Protection - 工作电压 / DC Voltage -V 辐射体 / Radiator - 尺寸 / Dimensions 35.2 x 9.6 mm 接口形式 / Connector Type IPEX-1（可定制） 电缆型号 / Cable Type RG1.13（可定制） 电缆长度 / Cable Length 200（可定制） mm 安装方式 / Mount way 压扣 颜色 / Color黑色 材料 / Meterial FPC 重量 / Weight - g 防护等级 / Waterproof Rating - ROHS标准 / ROHS Complaint 符合 工作温度 / Operating Temperature -45~ +85 °C 存储温度 / Storage Temperature -45~ +85 °C 2. . 产品规格 / Specification www.batwireless.cn August-5-2025-A01 电气特性 / Electrical Characteristics 机械特性 / Mechanical Characteristics 环境特性 / Environmental Characteristics 4 / 13 蝙蝠无线 BAT WIRELESS 3. . 实物图 / Dimensions www.batwireless.cn August-5-2025-A01 5 / 13 蝙蝠无线 BAT WIRELESS 图片仅供参考，以实物为准 4. . 尺寸图 / Mechanical Drawing www.batwireless.cn August-5-2025-A01 6 / 13 蝙蝠无线 BAT WIRELESS Testing Capability / 测试能力 Description / 能力描述 Active measurement 有源测试 Capability /测试指标: TRP 、TIS 、EIRP 、EIS,. etc Mode /测试制式: 2G/3G/4G/5G 、Wi-Fi b/g/n/a/ac/ax 、BT 、NB-IOT 、 Cat-M(eMTC) 、GPS/BEIDOU/GLONASS 、ZigBee 、LoRa(Non- Signaling),.etc Pasive measurement 无源测试 Test category /测试类型: Gain 、Efficiency 、2D pattern 、3D pattern 、 Pattern roundness、Axial Ratio, ECC,Phase center,. etc Polarization /极化方式: Circular polarization, linear polarization, elliptical polarization DT-3500 Datasheet / 系统规格 Specification:Description Test Frequency /测试频域: 400MHz-8.5GHz System Size /系统尺寸: L*W*H=4*3.5*3.5m Number of Probes /探头数目:23 (Probe) + 1 (link) Interval Angle /采样夹脚: 15º Sampling Diameter /采样直径: 2200mm Carring Capacity /承载能力: ≦40kg 5. . 测试设备 / Test Equipment Keysight/E5071C 网络分析仪 R&S/CMW500 综测仪 R&S/SMBV100B 信号源 www.batwireless.cn August-5-2025-A01 7 / 13 蝙蝠无线 BAT WIRELESS RF Link diaram of multi probe spherical near-field testing system 多探头球面近场测试系统射频链路图 RF Link Overview RF Link Passive measurement www.batwireless.cn August-5-2025-A01 RF Link Overview 总射频链路图 RF Link of Passive measurement 无源测试链路图 RF Link Overview 总射频链路图 RF Link of Passive measurement 无源测试链路图 8 / 13 蝙蝠无线 BAT WIRELESS www.batwireless.cn 6.1 电压驻波比 / VSWR August-5-2025-A01 6.2 回波损耗 / Return Loss 9 / 13 蝙蝠无线 BAT WIRELESS 6. . 性能数据 / Performance Data 6. . 性能数据 / Performance Data www.batwireless.cn 6.3 增益 / Gain August-5-2025-A01 6.4 效率 / Efficiency 10 / 13 蝙蝠无线 BAT WIRELESS 6.5 天线增益与效率 频率 / Frequency (MHz)240024502500515055005850 最大增益 / Gain (dBi) 3.843.783.973.814.694.09 效率 / Efficiency (%)68.23 65.6165.0163.2461.3856.1 0.00 10.00 20.00 30.00 40.00 50.00 60.00 70.00 80.00 90.00 100.00 2 4 0 0 . 0 2 4 1 0 . 0 2 4 2 0 . 0 2 4 3 0 . 0 2 4 4 0 . 0 2 4 5 0 . 0 2 4 6 0 . 0 2 4 7 0 . 0 2 4 8 0 . 0 2 4 9 0 . 0 2 5 0 0 . 0 5 1 5 0 . 0 5 1 7 5 . 0 5 2 0 0 . 0 5 2 2 5 . 0 5 2 5 0 . 0 5 2 7 5 . 0 5 3 0 0 . 0 5 3 2 5 . 0 5 3 5 0 . 0 5 3 7 5 . 0 5 4 0 0 . 0 5 4 2 5 . 0 5 4 5 0 . 0 5 4 7 5 . 0 5 5 0 0 . 0 5 5 2 5 . 0 5 5 5 0 . 0 5 5 7 5 . 0 5 6 0 0 . 0 5 6 2 5 . 0 5 6 5 0 . 0 5 6 7 5 . 0 5 7 0 0 . 0 5 7 2 5 . 0 5 7 5 0 . 0 5 7 7 5 . 0 5 8 0 0 . 0 5 8 2 5 . 0 5 8 5 0 . 0 Efficiency (%) -3.51 -2.51 -1.51 -0.51 0.49 1.49 2.49 3.49 4.49 5.49 2 4 0 0 . 0 2 4 1 0 . 0 2 4 2 0 . 0 2 4 3 0 . 0 2 4 4 0 . 0 2 4 5 0 . 0 2 4 6 0 . 0 2 4 7 0 . 0 2 4 8 0 . 0 2 4 9 0 . 0 2 5 0 0 . 0 5 1 5 0 . 0 5 1 7 5 . 0 5 2 0 0 . 0 5 2 2 5 . 0 5 2 5 0 . 0 5 2 7 5 . 0 5 3 0 0 . 0 5 3 2 5 . 0 5 3 5 0 . 0 5 3 7 5 . 0 5 4 0 0 . 0 5 4 2 5 . 0 5 4 5 0 . 0 5 4 7 5 . 0 5 5 0 0 . 0 5 5 2 5 . 0 5 5 5 0 . 0 5 5 7 5 . 0 5 6 0 0 . 0 5 6 2 5 . 0 5 6 5 0 . 0 5 6 7 5 . 0 5 7 0 0 . 0 5 7 2 5 . 0 5 7 5 0 . 0 5 7 7 5 . 0 5 8 0 0 . 0 5 8 2 5 . 0 5 8 5 0 . 0 Efficiency (dBi)Gain (dBi) 7. . 辐射模式 / Radiation Patterns www.batwireless.cn August-5-2025-A01 7.1 2D 辐射模式图 / Radiation Patterns 11 / 13 蝙蝠无线 BAT WIRELESS www.batwireless.cn August-5-2025-A01 6.2 . 3D辐射模式图 / 3D Radiation Patterns 12 / 13 蝙蝠无线 BAT WIRELESS 版本： August-5-2025-A01 日期： 2025-8-5 备注： 首次更新 作者： Carly 文档记录 / Documentation www.batwireless.cn August-5-2025-A01 13 / 13 变更记录 /…

Text truncated - open the document above for the full version.

Conducted Emission Test Setup: Radiated Emission Test Setup: RF test Setup: