2BC2U-S60RXWireless Microphone

S 60 Wireless Microphone EN User manual CN 用户手册 DE Bedienungsanleitung Manuel d’utilisation Manuale dell'utente Manual del usuario Manual do usuário Gebruiksaanwijzing Gebruikershandleiding FR IT ES PT NL SE KR JP 1. Please read this manual carefully before using this product. 2. Please pay attention to all warning prompts and follow all instructions in the user manual. 3. The battery’s state of charge (SoC) is ≤ 30% of the rated design capacity at the time of leaving the factory. 4. Built-in non-removable lithium battery, unauthorized disassembly is strictly prohibited; external lithium battery, no disassembly is allowed. 5. After prolonged storage without use, it is recommended to charge and discharge the battery once every 6 months for maintenance to restore about 60% of the charged capacity, thus extending the battery’s lifespan. 6. Please do not throw away the product wilfully as its battery contains a few harmful substances. Please recycle the damaged or unused products in accordance with the waste management measures. 7. Children should use it under adult guidance. 8.Bitte halten Sie die neuen und alten Batterien von Kindern fern. 9.In der Batterie befinden sich einige Schadstoffe, bitte werfen Sie sie nicht willkürlich weg, sondern recyceln Sie die beschädigten oder nicht mehr verwendeten Produkte gemäß den Vorschriften der Abfallwirtschaft. Important Reminder Thank you for choosing SmallRig products. Please refrain from disassembling the product or the battery. If there’s any problem with the product, please contact the purchase platform for after-sales assistance. CN 感谢您购买 SmallRig 产品。 请勿拆卸产品，如果您怀疑产品有任何问题，请联络购买平台，申请售后处理。 重要提示 1. 使用本产品之前，请仔细阅读用户手册。 2. 请注意所有警告提示并遵循使用用户手册内的所有指令。 3. 电池在出厂时的荷电量 (SoC) ≤ 30%额定设计容量。 4. 内置式不可拆卸锂电池，严禁擅自拆机；外置式锂电池，请勿拆解电池。 5. 电池在长时间储存不用时，应在6个月内进行一次充放电维护，并恢复60%左右的带电量以延长电池的使用寿命。 6. 电池内部有少许有害物质，请勿任意丢弃，请将损坏或是不再使用的产品，依照废弃物管理办法回收处理。 7. 儿童请在成人指导下使用。 8. 请将新电池和旧电池放在远离儿童的地方。 9. 电池内部有少许有害物质，请勿任意丢弃，请将损坏或是不再使用的产品，依照废弃物管理办法回收处理。 1. Bevor Sie dieses Produkt verwenden, lesen Sie bitte sorgfältig die Bedienungsanleitung durch. 2. Bitte beachten Sie alle Warnhinweise und befolgen Sie alle Anweisungen in der Bedienungsanleitung. 3. Die Batterien werden ab Werk mit einem Ladezustand (SoC) ≤ 30% der Nennkapazität ausgeliefert. 4. Eingebaute, nicht entfernbare Lithiumbatterien, unbefugte Demontage ist strengstens verboten; externe Lithiumbatterie, bitte zerlegen Sie die Batterie nicht. 5. Wenn die Batterie für eine lange Zeit ohne Gebrauch gelagert wird, sollte sie zur Wartung innerhalb von 6 Monaten geladen und entladen werden, und etwa 60% der Ladekapazität sollte wiederhergestellt werden, um die Lebensdauer der Batterie zu verlängern. 6. In der Batterie befinden sich einige Schadstoffe, bitte werfen Sie sie nicht willkürlich weg, sondern recyceln Sie die beschädigten oder nicht mehr verwendeten Produkte gemäß den Vorschriften der Abfallwirtschaft. 7. Kinder sollten es unter Anleitung von Erwachsenen anwenden. 8. Bitte halten Sie die neuen und alten Batterien von Kindern fern. 9. In der Batterie befinden sich einige Schadstoffe, bitte werfen Sie sie nicht willkürlich weg, sondern recyceln Sie die beschädigten oder nicht mehr verwendeten Produkte gemäß den Vorschriften der Abfallwirtschaft. Wichtige Hinweise Vielen Dank für den Kauf von SmallRig Produkten. Zerlegen Sie das Produkt oder die Batterie nicht. Wenn Sie irgendwelche Probleme mit dem Produkt vermuten, wenden Sie sich bitte an die Einkaufsplattform, um den Kundendienst zu beantragen. 1. Si prega di leggere attentamente il manuale dell'utente prima di utilizzare questo prodotto. 2. Si prega di prestare attenzione a tutte le avvertenze e seguire tutte le istruzioni nel manuale dell'utente. 3. Lo stato di carica (SoC) della batteria all'uscita dalla fabbrica è ≤ 30% della capacità nominale di progetto. 4. Batteria al litio incorporata non rimovibile, lo smontaggio non autorizzato è severamente vietato; batteria al litio esterna, non smontare la batteria. 5. Quando la batteria non viene utilizzata per un lungo periodo di tempo, deve essere caricata e scaricata per manutenzione entro 6 mesi e ripristinata a circa il 60% della capacità di carica per prolungare la durata della batteria. 6. All'interno della batteria sono presenti alcune sostanze nocive, si prega di non gettarla via in modo casuale, ma di riciclare i prodotti danneggiati o non più utilizzati secondo le normative sulla gestione dei rifiuti. 7. I bambini si prega di usarlo sotto la guida di un adulto. 8. Tenere le batterie nuove e vecchie lontano dalla portata dei bambini. 9. All'interno della batteria sono presenti alcune sostanze nocive, si prega di non gettarla via in modo casuale, ma di riciclare i prodotti danneggiati o non più utilizzati secondo le normative sulla gestione dei rifiuti. suggerimento importante Grazie per aver acquistato il prodotto di SmallRig. Por favor, no desmonte el producto ni la batería. Si usted sospecha cualquier problema con el producto, por favor comuníquese con la plataforma de compras para solicitar el servicio de postventa. 1. Lea el manual del usuario atentamente antes de utilizar el aparato. 2. Preste atención a todas las advertencias y siga todas las instrucciones del manual del usuario. 3. El estado de carga de la batería (SoC) al salir de fábrica es inferior o igual al 30% de la capacidad nominal. 4. Este producto tiene una batería de lítio no extraíble incorporada. Está estrictamente prohibido desmontarlo sin autorización; Y la batería externa de lítio, no la desmonte. 5. Cuando la batería no se utiliza durante un período prolongado, se debe cargar y descargar una vez cada 6 meses y restaurarla a aproximadamente el 60 % de la capacidad cargada con el fin de extender su vida útil. 6. Hay algunas sustancias nocivas dentro de la batería, por lo que no la deseche batería al azar. Por favor, recicle los productos dañados o que ya no utilicen de acuerdo con la política de gestión de residuos. 7. Los niños sólo deben utilizarlob…

Text truncated - open the document above for the full version.

FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Photo 7 Appearance of EUT

FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Appendix I Label Appendix II Label Location

FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 8 Internal of EUT Photo 9 Appearance of PCB BT Ant FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Photo 10 Appearance of PCB

Report No.: TBR-C-202406-0183-7 Page: 1 of 5 TB-RF-074-1.0 Maximum Permissible Exposure Evaluation FCC ID: 2BC2U-S60RX&IC: 31675-S60RX 1. General Information about EUT 1.1 Client Information Applicant : Shenzhen LC Co., Ltd Address : Rooms 602, Building 5, Fenghe Industrial Park, No. 1301-50 Guanguang Road, Xinlan Community, Guanlan Street, Longhua District, Shenzhen,China Manufacturer : Shenzhen Leqi Innovation Co., Ltd. Address : Rooms 103, 501 and 601, Building 5, Fenghe Industrial Park, Nos. 1301-50 Guanguang Road, Longhua District, Shenzhen, Guangdong, China. 1.2 General Description of EUT (Equipment Under Test) EUT Name : Wireless Microphone Models No. : S 60, S 50 HVIN S600 Model Different : All these models are identical in the same PCB, layout and electrical circuit, The only difference is model name, brand name and product name. Brand Name : SmallRig Sample ID : HC-C-202406-0183-01-01 Product Description : Operation Frequency: Bluetooth&BLE: 2402MHz~2480MHz Antenna Gain: 0.3dBi Sheet Steel Antenna Power Rating : USB Input:5V Software Version : V1.0 Hardware Version : V1.2 Remark: The adapter provided by the TOBY ,the antenna gain from the manufacturer, the verified for the RF conduction test provided by TOBY test lab.The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: TBR-C-202406-0183-7 Page: 2 of 5 TB-RF-074-1.0 The RF Exposure Evaluation for FCC: SAR Test Exclusion Calculations FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤7.5.0 for 10-g SAR Report No.: TBR-C-202406-0183-7 Page: 3 of 5 TB-RF-074-1.0 Calculation: Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 -0.003 0±1 1 1.259 0.390 3.0 2441 0.01 0±1 1 1.259 0.393 3.0 2480 0.758 0±1 1 1.259 0.397 3.0 Bluetooth Mode (π/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 0.024 0±1 1 1.259 0.390 3.0 2441 0.098 0±1 1 1.259 0.393 3.0 2480 0.789 0±1 1 1.259 0.397 3.0 Bluetooth Mode (8-DPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 0.123 0±1 1 1.259 0.390 3.0 2441 0.222 0±1 1 1.259 0.393 3.0 2480 0.942 0±1 1 1.259 0.397 3.0 Test separation: 5mm BLE Mode(1Mbps) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 -1.878 -1±1 0 1.000 0.310 3.0 2.440 -1.848 -1±1 0 1.000 0.312 3.0 2.480 -1.071 -1±1 0 1.000 0.315 3.0 BLE Mode(2Mbps) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 -1.935 -1±1 0 1.000 0.310 3.0 2.440 -1.966 -1±1 0 1.000 0.312 3.0 2.480 -1.245 -1±1 0 1.000 0.315 3.0 Report No.: TBR-C-202406-0183-7 Page: 4 of 5 TB-RF-074-1.0 The RF Exposure Evaluation for IC: SAR Test Exclusion Calculations IC: According to RSS-102 — Radio Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands) Issue 5 (2) Clause 2.5.1: Exemption limits for Routine Evaluation – SAR Evaluation SAR evaluation is required if the separation distance between the user and/or bystander and the antenna and/or radiating element of the device is less than or equal to 20 cm, except when the device operates at or below the applicable output power level (adjusted for tune-up tolerance) for the specified separation distance defined in Table 1. Table 1: SAR evaluation — Exemption limits for routine evaluation based on frequency and separation distance Frequency (MHz) Exemption Limits (mW) At separation distance of ≤5 mm At separation distance of 10 mm At separation distance of 15 mm At separation distance of 20 mm At separation distance of 25 mm ≤300 71 mW 101 mW 132 mW 162 mW 193 mW 450 52 mW 70 mW 88 mW 106 mW 123 mW 835 17 mW 30 mW 42 mW 55 mW 67 mW 1900 7 mW 10 mW 18 mW 34 mW 60 mW 2450 4 mW 7 mW 15 mW 30 mW 52 mW 3500 2 mW 6 mW 16 mW 32 mW 55 mW 5800 1 mW 6 mW 15 mW 27 mW 41 mW Table 1: SAR evaluation — Exemption limits for routine evaluation based on frequency and separation distance Frequency (MHz) Exemption Limits (mW) At separation distance of 30 mm At separation distance of 35 mm At separation distance of 40 mm At separation distance of 45 mm At separation distance of ≥50 mm ≤300 223 mW 254 mW 284 mW 315 mW 345 mW 450 141 mW 159 mW 177 mW 195 mW 213 mW 835 80 mW 92 mW 105 mW 117 mW 130 mW 1900 99 mW 153 mW 225 mW 316 mW 431 mW 2450 83 mW 123 mW 173 mW 235 mW 309 mW 3500 86 mW 124 mW 170 mW 225 mW 290 mW 5800 56 mW 71 mW 85 mW 97 mW 106 mW Report No.: TBR-C-202406-0183-7 Page: 5 of 5 TB-RF-074-1.0 1. Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Gain (dBi) E.I.R.P. (dBm) Tolerance ± (dB) Output power (Max. Turn-up Procedure) (mW) Limit (mW) 2402 -0.003 0.3 0.297 1±1 1.585 4.0 2441 0.01 0.3 0.31 1±1 1.585 4.0 2480 0.758 0.3 1.058 1±1 1.585 4.0 Bluetooth Mode (π/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Gain (dBi) …

Text truncated - open the document above for the full version.

深圳市林荣科技有限公司 Page 1 样品承认书 Confirmationofproducts 公司名称：深圳市林荣科技有限公司 Designer：SHENZHENLINRONGTECHNOLOGYCO.,LTD 地址：深圳市龙华区大浪街道华荣路联建工业园1栋3楼 ADD：Floor3,building1,LianJianIndustrialPark,HuarongRoad,Dalangstreet,Longhua District,Shenzhen 客户名称 深圳好麦创新技术有限公司 Customer 项目名称 M001 版本 A.1 日期 2024-08-02 ProjectNameVersionDate 项目料号 30.01.10.02 客户料号 Customer NO. HM-M001-0002-080 ProjectNO. 频段 2400~2500MHz 备注 Notes RX FrequencyRange 设计 张海燕田秋奎王宇 DesignedBy 审核 解瑞洁 ApprovedBy 客户确认 Clients’Approval 深圳市林荣科技有限公司 Page2 Index 1.Specifications··················································································3 2.VSWRTesting·················································································3 2-1Testingconnection···········································································3 2-2VSWR··························································································4 2-3Testingdata···················································································4 3.Power、SensiticityTesting.............................................................4 3-1Testingfield···················································································4 3-2Testingresults.............................................................................................5 3.3Activetesting........................................................................................5 4、Environmentaltreatment............................................................5 5.MechanicalDimensionDrawing·····························································6 6.MechanicalDimensionTestingreport······················································7 7、Packagingstandard................................................................................................8 深圳市林荣科技有限公司 Page3 1、Specification Thisreportmainlyprovidesthetestingconditionsofvariouselectricandstructuralperformanceparameters forcellphoneantenna----M001Picture1showstheantennadesignedbyLR. 2、VSWRTesting 2.1Testingconnection TheReturnLosstestingdevicesareconnectedinsequence:Agilent5071CNetworkAnalyzer→Testing Cable→Customer-providingDevices. 2.2VSWR ThefollowingtableexpressestheVSWRvalueofantenna’stwoedgesofitsfrequencyrange.With regardtotherelevantdiagramofVSWR M001RXVSWR Frequency(MHz)240024502500 VSWR 1.58 1.92 2.76 2.3Testingdata 深圳市林荣科技有限公司 Page4 2.4GBTantennaVSWR 2400MHz2450MHz2500MHz 3、Power、SensiticityTesting 3.1Testingfield LRMicrowaveAnechoicChamber：testingfrequencyrangesfrom400MHzto6GHzandthe40cm diametersphericalquitezone,thechamberprovideslessthan－90dBreflectivityfrom400MHz—6GHz. 3.2Testingresults ThefollowingtableindicatesthetestingresultsrelatedtoPowerandSensitivityinMicrowaveAnechoic 深圳市林荣科技有限公司 Page5 Chamber，concerningtherelativediagram. 3.3Activetesting. M001Antennaefficiency Freq(MHz)GainEfficiency(%) 24000.10 241 51.65 053.60.250 242052.50.223 243050.90.143 2440 245 0.3052.62 048.80.269 246047.40.084 247045.00.159 2480 249 0.2947.24 043.70.172 250042.00.247 M001Activedata chNO Freq （MHz) TRPTIS 7# 0240210.37-93.79 3924419.09-93.21 7824807.18-92.23 10# 0240210.35-93.65 3924418.42-92.54 7824806.55-91.09 4、Environmentaltreatment Originalassemblyoftheentiremachine 深圳市林荣科技有限公司 Page6 5、MechanicalDimensionDrawing 深圳市林荣科技有限公司 Page7 6.MechanicalDimensionTestingreport 深圳市林荣科技有限公司 Page8 7.Packagingstandard 包装说明：具体包装数量以实物为准，图片只显示包装的方式，并非此项目实物。 PackagingDescription:thespecificpackagingquantityissubjecttothephysicalobject.Thepictureonlyshows thewayofpackaging,notthephysicalobjectoftheproject 天线用PE袋包装 Thetopcoverboard,withPEfilmpackaging 防潮防水PET袋封装，放于纸箱或胶筐内 MoistureproofwaterproofPETbagpackaging， Putinthecartons 纸箱用胶带封口 Cartonsealingwithducttape 包装箱整箱外观（） Casesappearance

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 1 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 RF Test Data for Bluetooth (Conducted Measurements) General Description of EUT Product Name: Wireless Microphone Test Model: S 60 Sample ID: HC-C-202406-0183-01-01 Environmental Conditions Temperature: 24.6°C Relative Humidity: 51.2% Test Voltage: DC 5V Test Engineer: Mike Yan Note: For a more detailed features description, please refer to the report TBR-C-202406-0183-31 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 2 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 Contents 1.Duty Cycle ............................................................................................................................................................................................ 3 2.Maximum Conducted Output Power .................................................................................................................................................. 9 3.-20dB Bandwidth ............................................................................................................................................................................... 18 4.Occupied Channel Bandwidth .......................................................................................................................................................... 24 5.Band Edge ......................................................................................................................................................................................... 30 6.Band Edge(Hopping) ......................................................................................................................................................................... 37 7.Conducted RF Spurious Emission ................................................................................................................................................... 44 8.Restrict Band ..................................................................................................................................................................................... 54 9.Carrier Frequencies Separation ....................................................................................................................................................... 61 10.Number of Hopping Channel .......................................................................................................................................................... 64 11.Dwell Time ........................................................................................................................................................................................ 67 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 3 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 1.Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 29.6 5.29 2.7 NVNT 1-DH1 2441 Ant1 29.6 5.29 2.7 NVNT 1-DH1 2480 Ant1 30.4 5.17 2.63 NVNT 2-DH1 2402 Ant1 30.4 5.17 2.63 NVNT 2-DH1 2441 Ant1 30.4 5.17 2.63 NVNT 2-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2402 Ant1 30.4 5.17 2.63 NVNT 3-DH1 2441 Ant1 30.4 5.17 2.63 NVNT 3-DH1 2480 Ant1 30.4 5.17 2.63 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 4 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 5 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 6 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 7 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 8 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0183-31 Page: 9 of 72 FCC ID: 2BC2U-S60RX IC:31675-S60RX TB-RF-074-1.0 2.Maximum Conducted Output Power Condition Mode Frequency (MHz) Total Power (dBm) Limit (dBm Gian(dBm) EIRP(dBm) EIRP Limit (dBm) Verdict NVNT 1-DH1 2402 -0.003 21 0.3 0.297 36 Pass NVNT 1-DH1 2441 0.01 21 0.3 0.31 36 Pass NVNT 1-DH1 2480 0.758 21 0.3 1.058 36 Pass NVNT 1-DH3 2441 0.094 21 0.3 0…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202406-0183-31 Page: 1 of 52 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2BC2U-S60RX&IC:31675-S60RX Report No. : TBR-C-202406-0183-31 Applicant : Shenzhen LC Co., Ltd Equipment Under Test (EUT) EUT Name : Wireless Microphone Model No. : S 60 Series Model No. : S 50 Brand Name : SmallRig Sample ID : HC-C-202406-0183-01-01&HC-C-202406-0183-02-01 Receipt Date : 2024-06-27 Test Date : 2024-06-27 to 2024-07-16 Issue Date : 2024-07-16 Standards : FCC Part 15 Subpart C 15.247 RSS-247 Issue 3 August 2023 RSS-Gen Issue 5 April 2018+Amendment 1 (March 2019)+Amendment 2 (February 2021) Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Test By : Mike Yan Reviewed By : Henry Huang Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202406-0183-31 Page: 2 of 52 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................ 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................ 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode ................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility........................................................................................................................... 9 2. TEST SUMMARY..................................................................................................................... 10 3. TEST SOFTWARE .................................................................................................................. 10 4. TEST EQUIPMENT AND TEST SITE .................................................................................. 11 5. CONDUCTED EMISSION ...................................................................................................... 12 5.1 Test Standard and Limit ................................................................................................... 12 5.2 Test Setup........................................................................................................................... 12 5.3 Test Procedure .................................................................................................................. 12 5.4 Deviation From Test Standard......................................................................................... 12 5.5 EUT Operating Mode ........................................................................................................ 13 5.6 Test Data............................................................................................................................. 13 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 14 6.1 Test Standard and Limit ................................................................................................... 14 6.2 Test Setup........................................................................................................................... 15 6.3 Test Procedure .................................................................................................................. 16 6.4 Deviation From Test Standard......................................................................................... 17 6.5 EUT Operating Mode ........................................................................................................ 17 6.6 Test Data............................................................................................................................. 17 7. RESTRICTED BANDS AND BAND EDGE REQUIREMENT .......................................... 18 7.1 Test Standard and Limit ................................................................................................... 18 7.2 Test Setup........................................................................................................................... 18 7.3 Test Procedure .................................................................................................................. 19 7.4 Deviation From Test Standard......................................................................................... 19 7.5 EUT Operating Mode ........................................................................................................ 19 7.6 Test Data............................................................................................................................. 19 8. 99% OCCUPIED AND 20DB BANDWIDTH ....................................................................... 20 8.1 Test Standard and Limit ......................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Conducted Emission(AC POWER) Photo of Setup for Radiated Emission (30MHz~1GHz) FCC ID: 2BC2U-S60RX&IC: 31675-S60RX TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) -----END OF REPORT-----