2BCY2-RKKSG02Smartglove II

Textile label applied here

FCC Part 15.407 RSS-247 Issue 2, Feb 2017; RSS-Gen Issue 5, Mar 2019 TEST REPORT For Redpine Signals Inc 2107 N First Street, Suite 540, San Jose, CA 95131-2019, USA FCC ID: XF6-M7DB7 IC: 8407A-M7DB7 Report Type CIIPC Report Product Name: Dual Band 802.11 a/b/g/n, Bluetooth 5.0 SIP Module Model Name: M7DB Report Number : RLK200519001-00D Report Date : 2020/07/02 Reviewed By : Zeus Chen Prepared By: Bay Area Compliance Laboratories Corp.(Linkou Laboratory) No. 6, Wende 2Rd., Guishan Dist., Taoyuan City 33382, Taiwan (R.O.C.) Tel: +886 (3)3961072; Fax: +886 (3) 3961027 www.bacl.com.tw Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200519001-00D Page 2 of 52 Revision History Revision Report Number Issue Date Description 1.0 RLK200519001-00D 2020/07/02 CIIPC Report Note1 Note1: The original report number is RLK200203002-00E, and the CIIPC report is for adding antenna (PIFA Antenna (MARS-31A8 WiFi Antenna)) Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200519001-00D Page 3 of 52 TABLE OF CONTENTS 1 GENERAL INFORMATION ....................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...................................................................................... 4 1.2 OPERATION CONDITION OF EUT ............................................................................................................................ 5 1.3 OBJECTIVE ......................................................................................................................................................... 5 1.4 MEASUREMENT UNCERTAINTY .............................................................................................................................. 6 1.5 ENVIRONMENTAL CONDITIONS AND TEST DATE ........................................................................................................ 6 1.6 TEST FACILITY ..................................................................................................................................................... 6 2 SYSTEM TEST CONFIGURATION ............................................................................................................................. 7 2.1 DESCRIPTION OF TEST CONFIGURATION ................................................................................................................... 7 2.2 SUPPORT EQUIPMENT AND EXTERNAL CABLE LIST ..................................................................................................... 8 2.3 BLOCK DIAGRAM OF TEST SETUP ........................................................................................................................... 9 2.4 DUTY CYCLE ....................................................................................................................................................... 9 3 SUMMARY OF TEST RESULTS ............................................................................................................................... 10 4 FCC §1.1310, §2.1091, §15.407(F) - MAXIMUM PERMISSIBLE EXPOSURE (MPE) .............................................. 11 4.1 APPLICABLE STANDARD ...................................................................................................................................... 11 4.2 RF EXPOSURE EVALUATION RESULT ...................................................................................................................... 11 5 RSS-102 SEC 2.5.2- EXEMPTION LIMITS FOR ROUTINE EVALUATION – RF EXPOSURE EVALUATION ................ 12 5.1 APPLICABLE STANDARD ...................................................................................................................................... 12 5.2 RF EXPOSURE EVALUATION RESULT ...................................................................................................................... 12 6 FCC §15.203 AND RSS-247 SEC 6.8 – ANTENNA REQUIREMENTS ....................................................................... 13 6.1 APPLICABLE STANDARD ...................................................................................................................................... 13 6.2 ANTENNA LIST AND DETAILS ............................................................................................................................... 13 7 FCC §15.209, §15.205 & §15.407(B), RSS-GEN SEC 8.9, 8.10 AND RSS-247 SEC 6.2 –SPURIOUS UNWANTED EMISSIONS .................................................................................................................................................................... 14 7.1 APPLICABLE STANDARD ...................................................................................................................................... 14 7.2 EUT SETUP AND TEST PROCEDURE ....................................................................................................................... 17 7.3 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 18 7.4 TEST DATA AND TEST PLOT ................................................................................................................................. 19 8 FCC §15.407(A)(1) AND RSS-247 SEC 6.2 – MAXIMUM OUTPUT POWER........................................................... 33 8.1 APPLICABLE STANDARD ...................................................................................................................................... 33 8.2 TEST PROCEDURE .................................................................................................................…

Text truncated - open the document above for the full version.

FCC Part 15.407 RSS-247 Issue 2, Feb 2017; RSS-Gen Issue 5, Mar 2019 DYNAMIC FREQUENCY SELECTION TEST REPORT For Redpine Signals Inc 2107 N First Street, Suite 540, San Jose, CA 95131-2019, USA FCC ID: XF6-M7DB7 IC: 8407A-M7DB7 Report Type Original Report Product Name: Dual Band 802.11 a/b/g/n, Bluetooth 5.0 SIP Module Model Name: M7DB Report Number : RLK200203002-00F Report Date : 2020/05/18 Reviewed By : Zeus Chen Prepared By: Bay Area Compliance Laboratories Corp.(Linkou Laboratory) No. 6, Wende 2Rd., Guishan Dist., Taoyuan City 33382, Taiwan (R.O.C.) Tel: +886 (3)3961072; Fax: +886 (3) 3961027 www.bacl.com.tw Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00F Page 2 of 20 Revision History Revision Report Number Issue Date Description 1.0 RLK200203002-00F 2020/05/18 Original Report Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00F Page 3 of 20 TABLE OF CONTENTS 1 GENERAL INFORMATION ....................................................................................................................................... 4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...................................................................................... 4 1.2 OPERATION CONDITION OF EUT ............................................................................................................................ 4 1.3 ENVIRONMENTAL CONDITIONS AND TEST DATE ........................................................................................................ 4 1.4 OBJECTIVE AND TEST METHODOLOGY ..................................................................................................................... 5 1.5 MEASUREMENT UNCERTAINTY .............................................................................................................................. 5 1.6 SUPPORT EQUIPMENT LIST AND EXTERNAL CABLE LIST ............................................................................................... 5 1.7 ANTENNA LIST AND DETAILS ................................................................................................................................. 6 1.8 SYSTEM TEST CONFIGURATION AND BLOCK DIAGRAM ................................................................................................ 6 1.9 TEST FACILITY ..................................................................................................................................................... 6 2 SUMMARY OF TEST RESULTS ................................................................................................................................. 7 3 APPLICABLE STANDARDS ....................................................................................................................................... 8 3.1 DFS REQUIREMENT ............................................................................................................................................. 8 3.2 DFS MEASUREMENT SYSTEM .............................................................................................................................. 14 3.3 SYSTEM BLOCK DIAGRAM ................................................................................................................................... 14 3.4 TEST PROCEDURE .............................................................................................................................................. 15 4 TEST RESULT ......................................................................................................................................................... 16 4.1 DESCRIPTION OF EUT ........................................................................................................................................ 16 4.2 CHANNEL LOADING ........................................................................................................................................... 16 4.3 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 17 4.4 CONDUCTED TEST SETUP CONFIGURATION ............................................................................................................ 17 4.5 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL ............................................................................................... 18 4.6 RADAR WAVEFORMS ......................................................................................................................................... 18 5 CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME ............................................................. 19 5.1 TEST PROCEDURE .............................................................................................................................................. 19 5.2 TEST RESULT .................................................................................................................................................... 19 6 NON-OCCUPANCY PERIOD ................................................................................................................................... 20 6.1 TEST PROCEDURE .............................................................................................................................................. 20 6.2 TEST RESULT .................................................................................................................................................... 20 Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00F Page 4 of 20 1 General Information 1.1 Product Description for Equipment under Test (EUT) Applicant Redpine Signals Inc 2107 N First Street, Suite 540…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 101 of 149 For UNII-3 802.11a mode Low CH 802.11a mode Middle CH 802.11a mode High CH 802.11n HT20 mode Low CH Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 102 of 149 802.11n HT20 mode Middle CH 802.11n HT20 mode High CH 802.11n HT40 mode Low CH 802.11n HT40 mode High CH Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 103 of 149 10 FCC §15.407(a)(1) and RSS-247 Sec 6.2 – Maximum Output Power 10.1 Applicable Standard According to FCC §15.407(a), For an indoor access point operating in the band 5.15-5.25 GHz, the maximum conducted output power over the frequency band of operation shall not exceed 1 W provided the maximum antenna gain does not exceed 6 dBi. In addition, the maximum power spectral density shall not exceed 17 dBm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. For the 5.25-5.35 GHz and 5.47-5.725 GHz bands, the maximum conducted output power over the frequency bands of operation shall not exceed the lesser of 250 mW or 11 dBm + 10 log B, where B is the 26 dB emission bandwidth in megahertz. In addition, the maximum power spectral density shall not exceed 11 dBm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. For the band 5.725-5.85 GHz, the maximum conducted output power over the frequency band of operation shall not exceed 1 W. In addition, the maximum power spectral density shall not exceed 30 dBm in any 500-kHz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. However, fixed point-to-point U-NII devices operating in this band may employ transmitting antennas with directional gain greater than 6 dBi without any corresponding reduction in transmitter conducted power. Fixed, point-to- point operations exclude the use of point-to-multipoint systems, omnidirectional applications, and multiple collocated transmitters transmitting the same information. The operator of the U-NII device, or if the equipment is professionally installed, the installer, is responsible for ensuring that systems employing high gain directional antennas are used exclusively for fixed, point-to-point operations. Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 104 of 149  Frequency band 5150-5250 MHz There is no requirement in RSS-247 for the value of bandwidth. However, the 99% bandwidth is used to calculate the power limits given in RSS-247 section 6.2.1.1. Power measurements are made using the 99% Bandwidth as the integration bandwidth. For OEM devices installed in vehicles, the maximum e.i.r.p. shall not exceed 30 mW or 1.76 + 10 log10B, dBm, whichever is less stringent. Devices shall implement transmitter power control (TPC) in order to have the capability to operate at least 3 dB below the maximum permitted e.i.r.p. of 30 mW. For other devices, the maximum e.i.r.p. shall not exceed 200 mW or 10 + 10 log10B, dBm, whichever power is less. B is the 99% emission bandwidth in megahertz.  Frequency band 5250-5350 MHz For OEM devices installed in vehicles, the maximum e.i.r.p. shall not exceed 30 mW or 1.76 + 10 log10B, dBm, whichever is less. Devices shall implement TPC in order to have the capability to operate at least 3 dB below the maximum permitted e.i.r.p. of 30 mW. Devices, other than devices installed in vehicles, shall comply with the following: a) The maximum conducted output power shall not exceed 250 mW or 11 + 10 log10B, dBm, whichever is less. The power spectral density shall not exceed 11 dBm in any 1.0 MHz band; b) The maximum e.i.r.p. shall not exceed 1.0 W or 17 + 10 log10B, dBm, whichever is less. B is the 99% emission bandwidth in megahertz. Note that devices with a maximum e.i.r.p. greater than 500 mW shall implement TPC in order to have the capability to operate at least 6 dB below the maximum permitted e.i.r.p. of 1 W  Frequency bands 5470-5600 MHz and 5650-5725 MHz The maximum conducted output power shall not exceed 250 mW or 11 + 10 log10B, dBm, whichever is less. The power spectral density shall not exceed 11 dBm in any 1.0 MHz band. The maximum e.i.r.p. shall not exceed 1.0 W or 17 + 10 log10B, dBm, whichever is less. B is the 99% emission bandwidth in megahertz. Note that devices with a maximum e.i.r.p. greater than 500 mW shall implement TPC in order to have the capability to operate at least 6 dB below the maximum permitted e.i.r.p. of 1 W.  Frequency band 5725-5850 MHz For equipment operating in the band 5725-5850 MHz, the minimum 6 dB bandwidth shall be at least 500 kHz. The maximum conducted output power shall not exceed 1 W. The output power spectral density shall not exceed 30 dBm in any 500 kHz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the output power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. However, fixed point-to-point devices operating in this band may employ transmitting antennas with directional gain greater than 6 dBi without any corresponding reduction in transmitter conducted power. Fixed point-topoint operations exclude the use of point-to-multipoint3 systems, omnidirectional applications and multiple collocated transmitters transmitting the same info…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 51 of 149 Above 1G (1 GHz-40 GHz) in UNII-3: 802.11a mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 52 of 149 802.11n HT20 mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 53 of 149 802.11n HT40 mode: Low CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 54 of 149 Above 1G (1 GHz-40 GHz): test the worst mode: UNII-3 802.11a Middle CH. Horizontal Vertical Level = Read Level + Factor Over Limit = Level – Limit Correct Factor = Antenna Factor + Cable Loss – Amplifier Gain Spurious emissions more than 20 dB below the limit were not reported Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 55 of 149 < PCB Antenna (Redpine Signals RSIA7)> Transmitting mode (Pre-scan with three orthogonal axis, and worse case as Z axis) Below 1G (30 MHz-1 GHz) test the output power worst mode Horizontal Vertical Level = Read Level + Factor Over Limit = Level – Limit Correct Factor = Antenna Factor + Cable Loss – Amplifier Gain Spurious emissions more than 20 dB below the limit were not reported Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 56 of 149 Above 1G (1 GHz-40 GHz) in UNII-1: 802.11a mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 57 of 149 802.11n HT20 mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 58 of 149 802.11n HT40 mode: Low CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 59 of 149 Above 1G (1 GHz-40 GHz) in UNII-2a: 802.11a mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 60 of 149 802.11n HT20 mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 61 of 149 802.11n HT40 mode: Low CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 62 of 149 Above 1G (1 GHz-40 GHz) in UNII-2c: 802.11a mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 63 of 149 802.11n HT20 mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 64 of 149 802.11n HT40 mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 65 of 149 Above 1G (1 GHz-40 GHz) in UNII-3: 802.11a mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 66 of 149 802.11n HT20 mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 67 of 149 802.11n HT40 mode: Low CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 68 of 149 Above 1G (1 GHz-40 GHz): test the worst mode: UNII-2c A mode Middle CH. Horizontal Vertical Level = Read Level + Factor Over Limit = Level – Limit Correct Factor = Antenna Factor + Cable Loss – Amplifier Gain Spurious emissions more than 20 dB below the limit were not reported Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 69 of 149 < PIFA Antenna (SMARTEQ 4211613980)> Transmitting mode (Pre-scan with three orthogonal axis, and worse case as Z axis) Below 1G (30 MHz-1 GHz) test the output power worst mode Horizontal Vertical Level = Read Level + Factor Over Limit = Level – Limit Correct Factor = Antenna Factor + Cable Loss – Amplifier Gain Spurious emissions more than 20 dB below the limit were not reported Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 70 of 149 Above 1G (1 GHz-40 GHz) in UNII-1: 802.11a mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 71 of 149 802.11n HT20 mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 72 of 149 802.11n HT40 mode: Low CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 73 of 149 Above 1G (1 GHz-40 GHz) in UNII-2a: 802.11a mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 74 of 149 802.11n HT20 mode: Low CH Horizontal Vertical Middle CH Horizontal Vertical High CH Horizontal Vertical Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E …

Text truncated - open the document above for the full version.

FCC Part 15.407 RSS-247 Issue 2, Feb 2017; RSS-Gen Issue 5, Mar 2019 TEST REPORT For Redpine Signals Inc 2107 N First Street, Suite 540, San Jose, CA 95131-2019, USA FCC ID: XF6-M7DB7 IC: 8407A-M7DB7 Report Type Original Report Product Name: Dual Band 802.11 a/b/g/n, Bluetooth 5.0 SIP Module Model Name: M7DB Report Number : RLK200203002-00E Report Date : 2020/05/18 Reviewed By : Zeus Chen Prepared By: Bay Area Compliance Laboratories Corp.(Linkou Laboratory) No. 6, Wende 2Rd., Guishan Dist., Taoyuan City 33382, Taiwan (R.O.C.) Tel: +886 (3)3961072; Fax: +886 (3) 3961027 www.bacl.com.tw Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Linkou Laboratory) Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 2 of 149 Revision History Revision Report Number Issue Date Description 1.0 RLK200203002-00E 2020/05/18 Original Report Bay Area Compliance Laboratories Corp.(Linkou Laboratory) Report No.: RLK200203002-00E Page 3 of 149 TABLE OF CONTENTS 1 GENERAL INFORMATION ....................................................................................................................................... 5 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ...................................................................................... 5 1.2 OPERATION CONDITION OF EUT ............................................................................................................................ 7 1.3 OBJECTIVE ......................................................................................................................................................... 7 1.4 MEASUREMENT UNCERTAINTY .............................................................................................................................. 8 1.5 ENVIRONMENTAL CONDITIONS AND TEST DATE ........................................................................................................ 8 1.6 TEST FACILITY ..................................................................................................................................................... 8 2 SYSTEM TEST CONFIGURATION ............................................................................................................................. 9 2.1 DESCRIPTION OF TEST CONFIGURATION ................................................................................................................... 9 2.2 SUPPORT EQUIPMENT AND EXTERNAL CABLE LIST ................................................................................................... 12 2.3 BLOCK DIAGRAM OF TEST SETUP ......................................................................................................................... 13 2.4 DUTY CYCLE ..................................................................................................................................................... 13 3 SUMMARY OF TEST RESULTS ............................................................................................................................... 15 4 FCC §1.1310, §2.1091, §15.407(F) - MAXIMUM PERMISSIBLE EXPOSURE (MPE) .............................................. 16 4.1 APPLICABLE STANDARD ...................................................................................................................................... 16 4.2 RF EXPOSURE EVALUATION RESULT ...................................................................................................................... 16 5 RSS-102 SEC 2.5.2- EXEMPTION LIMITS FOR ROUTINE EVALUATION – RF EXPOSURE EVALUATION ................ 17 5.1 APPLICABLE STANDARD ...................................................................................................................................... 17 5.2 RF EXPOSURE EVALUATION RESULT ...................................................................................................................... 17 6 FCC §15.203 AND RSS-247 SEC 6.8 – ANTENNA REQUIREMENTS ....................................................................... 18 6.1 APPLICABLE STANDARD ...................................................................................................................................... 18 6.2 ANTENNA LIST AND DETAILS ............................................................................................................................... 18 7 FCC §15.207 AND RSS-247 SEC 6.8 – AC LINE CONDUCTED EMISSIONS ............................................................. 19 7.1 APPLICABLE STANDARD ...................................................................................................................................... 19 7.2 EUT SETUP AND TEST PROCEDURE ....................................................................................................................... 20 7.3 TEST EQUIPMENT LIST AND DETAILS ..................................................................................................................... 20 7.4 TEST DATA AND TEST PLOT ................................................................................................................................. 21 8 FCC §15.209, §15.205 & §15.407(B), RSS-GEN SEC 8.9, 8.10 AND RSS-247 SEC 6.2 –SPURIOUS UNWANTED EMISSIONS .................................................................................................................................................................... 22 8.1 APPLICABLE STANDARD ...................................................................................................................................... 22 8.2 EUT SETUP AND TEST PROCEDURE ....................................................................................................................... 25 8.3 TEST EQUIPMENT LIST AND DETAILS .................................................…

Text truncated - open the document above for the full version.