2BDD5-AIMB-G1MAXSmart Bluetooth Glasses

TCBCALLpágina1 FileFCCID:2BDD5-AIMB-G1MAX PleaseuploadanexhibitthatexplainshowdoestheTCBverifythenewagentinformation: 1-IstheaddressoftheagentavalidphysicalUSmailingaddress(notaUSpostofficebox,notavirtualmailbox,notP.O.Boxes,notavacantlot,notapublicbuilding, etc.) ○Wehavecheckediftheaddressexistsinarealandpotentialbuilding(Googlemaps)+officialUSregister,afterthisverificationandtheevidencebelowwecan guaranteethefollowing: notaUSpostofficebox notavirtualmailbox notP.O.Boxes notavacantlot notapublicbuilding(note) ►WecheckedtheFCCFRNSearchbasedontheinformationprovidedbythegrantee. Ontheofficialregisterfrom:https://bizfileonline.sos.ca.gov/search/business TCBCALLpágina2 Ingoogle: TCBCALLpágina3 ►CONCLUSIONbyTCB:TheASOPdefinedandprovidedbygranteeisVALIDandconfirmed.Thereforetheexhibit"NotapplicantasU.S.AgentLetterof Attestation_Rev1.0OK"includedinthefileisok. 2-IstheagentphysicallylocatedatthatvalidUSaddresssuchthattheagentcanbelegallyservedatthataddress? Yes,checkabove 3-Hasthelistedagentclearlyagreedinwritingtoserveastheagentforthegranteeatthataddress? Yes,itisincludedintheexhibit"NotapplicantasU.S.AgentLetterofAttestation_Rev1.0OK" >

Shenzhen SHOCII Technology Co., Ltd.1105, Building AB, Unit 2, Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao 'an District, Shenzhen, China U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: Aug. 3, 26 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BDD5-AIMB-G1MAX [Shenzhen SHOCII Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, [MIRAMONT SOLUTIONS LLC] (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. [MIRAMONT SOLUTIONS LLC] ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: MIRAMONT SOLUTIONS LLC FRN: 0036313369 Address:19 GEORGETOWN, IRVINE, CA92612 United States Signature: Contact Person: Wenyi Wang Tel: 951 401 3633 Email: [email protected] Applicant Company Name: Shenzhen SHOCII Technology Co., Ltd. FRN: 0034419499 Address: Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao 'an District, Shenzhen, China Signature: Contact Person: MIAOMIAO XIAO Tel: 0086 13603034005 Email: [email protected]

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen SHOCII Technology Co., Ltd. Grantee code: 2BDD5 FCC ID: 2BDD5-AIMB-G1MAX FRN: 0034419499 Contact Name: MIAOMIAO XIAO Address: Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao 'an District, Shenzhen, China Telephone No: 0086 13603034005 Fax No: 0086 13603034005 Email: [email protected] i. equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. [Shenzhen SHOCII Technology Co., Ltd.] (“the applicant”) certifies that the ii. [Shenzhen SHOCII Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. Applicant’s Name: Shenzhen SHOCII [Shenzhen SHOCII Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/8/3 Technology Co., Ltd. Title: Manager 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 Signature

Shenzhen SHOCII Technology Co., Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Device Smart Bluetooth Glasses Company name Shenzhen SHOCII Technology Co., Ltd. Grantee code 2BDD5 FCC ID 2BDD5-AIMB-G1MAX FRN 0034419499 Contact name MIAOMIAO XIAO Address Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao 'an District, Shenzhen, China Telephone number 0086 13603034005 E-mail [email protected] Chipset/module information JL7018F6 from Bluetooth TXW826-824 from WiFi Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A 3 # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher 3 RAM: 1 GB 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; 4 Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☐ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☐ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: MIAOMIAO XIAO Date:2026/8/3 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

Shenzhen SHOCII Technology Co., Ltd. Client’s signature: Client’s name / title: Marketing Manager� Contact information / address: Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Model Difference Product description: Smart Bluetooth Glasses Model name:AIMB-G1Max AIMB-G2Pro, AIMB-G3Pro, AIMB-G5Max, AIMB-G6, AIMB-G7, AIMB-G8, AIMB-G9,AIMB-G10, AIMB-G11, AIMB-G12, AIMB-G13 FCC ID:2BDD5-AIMB-G1MAX Trade Name:N/A We (Shenzhen SHOCIITechnology Co.,Ltd.) Hereby state thatall the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model nameand color. Regards Sincerely Street, Bao ‘an District, Shenzhen, China

C5266091_X10_Ed.2 1/1 < Shenzhen SHOCII Technology Co., Ltd.> Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026.8.3 Subject: Request for Confidentiality FCC ID: 2BDD5-AIMB-G1MAX To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of __180_ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: MIAOMIAO XIAO Title: Manager

C5266091_X8_Ed.1 1/1 Letter of Authorization <Shenzhen SHOCII Technology Co., Ltd.> Company: Shenzhen SHOCII Technology Co., Ltd. Address: Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao 'an District, Shenzhen, China Product Name: Smart Bluetooth Glasses Model Number: AIMB-G1Ma, AIMB-G2Pro, AIMB-G3Pro, AIMB-G5Max, AIMB- G6, AIMB-G7, AIMB-G8, AIMB-G9, AIMB-G10, AIMB-G11, AIMB-G12, AIMB-G13 FCC Identifier: 2BDD5-AIMB-G1MAX We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: MIAOMIAO XIAO Date: 2026.8.3 Title: Manager Signature of applicant:

FCC ID: 2BDD5-AIMB-G1MAX EUT PHOTO(External Photos) FCC ID: 2BDD5-AIMB-G1MAX FCC ID: 2BDD5-AIMB-G1MAX FCC ID: 2BDD5-AIMB-G1MAX

Label & label location 20mm*10mm FCC ID: 2BDD5-AIMB-G1MAX Label location

RF EXPOSURE EVALUATION METHOD FCC ID: 2BDD5-AIMB-G1MAX Applicable standard： In accordance with FCC 47 CFR part 2 (2.1093) this device has been defined as a portable device which is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable devices must be evaluated using the specified in FCC 47 CFR part 2 (2.1093). Per FCC KDB 447498 D01 v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances s 50 mm are determined by: SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. EDR Mode Max Power(dBm) Tune up Power (dBm) Max. Tune up Power (dBm) Max. Tune up Power (mW) Frequency (MHz) Min. distance (mm) Calc. thresholds limit GFSK 5.81 5±1 6 3.98 2441 5 1.24 3.0 π/4-DQPSK 6.34 6±1 7 5.01 2402 5 1.55 3.0 BLE Mode Max Power(dBm) Tune up Power (dBm) Max. Tune up Power (dBm) Max. Tune up Power (mW) Frequency (MHz) Min. distance (mm) Calc. thresholds limit GFSK 6.67 6±1 7 5.01 2440 5 1.57 3.0 WIFI2.4G Mode Max Power(dBm) Tune up Power (dBm) Max. Tune up Power (dBm) Max. Tune up Power (mW) Frequency (MHz) Min. distance (mm) Calc. thresholds limit 802.11b 5.86 5±1 6 3.98 2412 5 1.24 3.0 802.11g 5.74 5±1 6 3.98 2437 5 1.24 3.0 802.11n20 5.94 5±1 6 3.98 2462 5 1.25 3.0 Conclusion: 1. [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0. 1. 2. The same antenna cannot transmit at the same time, BT ANT & WIFI ANT can transmit atthe same time, So the worst simultaneous transmntting corsideration: The ratio = BT ANT MPE(MAX) / limit + WIFI ANT MPE(MAX) / limit = 1.57 / 3.0 + 1.25 /3.0 = 0.94 < 1. Result: No Standalone SAR test is required.

Report No.: ZKT-260724L1704E-1 Page 1 of 40 FCC TEST REPORT FCC ID:2BDD5-AIMB-G1MAX Report Number. ................................ : ZKT-260724L1704E-1 Date of Test ........................................ Jul. 20, 2026 to Aug. 06, 2026 Date of issue .................................... : Aug. 06, 2026 Total number of pages ....................... 40 Test Result ...................................... : PA SS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name .......................... : Shenzhen SHOCII Technology Co., Ltd. Address .......................................... : Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao ‘an District, Shenzhen, China Manufacturer's name ................... : Shenzhen SHOCII Technology Co., Ltd. Address .......................................... : Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao ‘an District, Shenzhen, China Test specification: Standard ........................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10-2020 +Cor. 1-2023+ C63.10a-2024+ Errata to C63.10a-2024 Test procedure ................................. : / Non-standard test method .............. : N/A Test Report Form No. ..................... : TRF-EL-111_V0 Test Report Form(s) Originator ..... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Smart Bluetooth Glasses Trademark ...................................... : N/A Model/Type reference ...................... : AIMB-G1MAX AIMB-G2PRO, AIMB-G3PRO, AIMB-G5MAX, AIMB-G6, AIMB-G7, AIMB-G8, AIMB-G9, AIMB-G10, AIMB-G11, AIM B-G12, AIMB-G13 Ratings ............................................. : Input: 5V/0.5A Battery: DC 3.8V, 290mAh, 1.11Wh Report No.: ZKT-260724L1704E-1 Page 2 of 40 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Jackson Fang Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Report No.: ZKT-260724L1704E-1 Page 3 of 40 Table of Contents Page 1.VERSION ....................................................................................................................... 5 2. SUMMARY OF TEST RESULTS ................................................................................... 6 2.1 TEST FACILITY ..................................................................................................................... 7 2.2 MEASUREMENT UNCERTAINTY.......................................................................................... 7 3. GENERAL INFORMATION ........................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................................... 8 3.2 DESCRIPTION OF TEST MODES ......................................................................................... 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED .................... 10 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ............................................. 10 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS ....................................................................... 11 4. EMC EMISSION TEST ................................................................................................ 13 4.1 CONDUCTED EMISSION MEASUREMENT ........................................................................ 13 4.1.1 POWER LINE CONDUCTED EMISSION Limits ............................................................. 13 4.1.2 TEST PROCEDURE ........................................................................................................ 13 4.1.3 DEVIATION FROM TEST STANDARD ............................................................................ 13 4.1.4 TEST SETUP ................................................................................................................... 14 4.1.5 EUT OPERATING CONDITIONS ..................................................................................... 14 TEST RESULT ......................................................................................................................... 15 4.2.1 RADIATED EMISSION LIMITS ........................................................................................ 17 4.2.2 TEST PROCEDURE ........................................................................................................ 17 4.2.3 DEVIATION FROM TEST STANDARD ............................................................................ 18 4.2.4 TEST SETUP ................................................................................................................... 18 4.2.5 EUT OPERATING CONDITIONS ..................................................................................... 19 5.RADIATED BAND EMISSION MEASUREMENT ......................................................... 24 5.1 TEST REQUIREMENT: ..................................................…

Text truncated - open the document above for the full version.

Inverted F Antenna Specification Summary ITEMANT SPEC Model Name 2.4G ANT HorizontalVertic al 2400MHz 2450MHz 2 480MHz 2 400MHz 2 450MHz 2 480MHz Center Frequency -1.26-0.65 0.5 -5.25-2.46-1.86 MAX. Gain PolarizationHori zontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50 O hm Antenna Length 2 0 mm Manufacture Antenna Photo & Length (mm) MAX. Gain 0.5dbi Zhuhai Jieli Technology Co., Ltd. Address No. 333 Kexing Road, Xiangzhou District, Zhuhai City, Guangdong Province, China‌ Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0.5 Min: -36.56 Scale: 5/div Gain (d B) Freque ncy (MHz) MaxMinA vg 2400-1.26025-30.0801-7.18716 2450 -0.65212-36.5604-7.48023 2500 0.50012-22.0125-6.39416 Vertical: 2400 MHz 2450 MHz 2500 M Hz Power (dBm) M ax: -1.86 Min: -29.52 Scale: 5/div Gain(dB) Frequency (MHz) MaxMinAvg 2400 -5.25337 -22.1424-12.4294 2450 -2.46412 -24.5837-10.4702 2500 -1.86120 -29.5214-9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

Project No.: ZKT-260724L1704E-3 Page 1 of 57 FCC TEST REPORT FCC ID:2BDD5-AIMB-G1MAX Report Number. .............................. : ZKT-260724L1704E-3 Date of Test ......................................... Jul. 20, 2026 to Aug. 06, 2026 Date of issue .....................................: Aug. 06, 2026 Total number of pages ....................... 63 Test Result ......................................: PA SS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address ...........................................: 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : Shenzhen SHOCII Technology Co., Ltd. Address ...........................................: Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao ‘an District, Shenzhen, China Manufacturer's name ................... : Shenzhen SHOCII Technology Co., Ltd. Address ...........................................: Floor 2, Building B, Suojia Science park, Sanwei Community, Hangcheng Street, Bao ‘an District, Shenzhen, China Test specification: Standard............................................: FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10-2020 +Cor. 1-2023+ C63.10a-2024+ Errata to C63.10a-2024 Test procedure ..................................: / Non-standard test method ..............: N/A Test Report Form No. .................... : TRF-EL-111_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF ................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Smart Bluetooth Glasses Trademark .......................................: N/A Model/Type reference......................: AIMB-G1MAX AIMB-G2PRO, AIMB-G3PRO, AIMB-G5MAX, AIMB-G6, AIMB-G7, AIMB-G8, AIMB-G9, AIMB-G10, AIMB-G11, AIM B-G12, AIMB-G13 Ratings ..............................................: Input: 5V/0.5A Battery: DC 3.8V, 290mAh, 1.11Wh Project No.: ZKT-260724L1704E-3 Page 2 of 57 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Jackson Fang Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-260724L1704E-3 Page 3 of 57 Table of Contents Page 1. VERSION ..................................................................................................................... 5 2. SUMMARY OF TEST RESULTS .................................................................................. 6 2.1 TEST FACILITY ............................................................................................................... 7 2.2 MEASUREMENT UNCERTAINTY ................................................................................... 7 3. GENERAL INFORMATION .......................................................................................... 8 3.1 GENERAL DESCRIPTION OF EUT................................................................................. 8 3.2 DESCRIPTION OF TEST MODES ................................................................................... 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED .............. 10 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) ....................................... 10 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS ................................................................. 11 4. EMC EMISSION TEST ............................................................................................... 13 4.1 CONDUCTED EMISSION MEASUREMENT ................................................................. 13 4.1.1 POWER LINE CONDUCTED EMISSION Limits ................................................... 13 4.1.2 TEST PROCEDURE .............................................................................................. 13 4.1.3 DEVIATION FROM TEST STANDARD .................................................................. 13 4.1.4 TEST SETUP ......................................................................................................... 14 4.1.5 EUT OPERATING CONDITIONS ........................................................................... 14 4.1.6 TEST RESULT ....................................................................................................... 15 4.2 R AD I AT E D EMISSION MEASUREMENT ...................................................................... 17 4.2.1 RADIATED EMISSION LIMITS .............................................................................. 17 4.2.2 TEST PROCEDURE .............................................................................................. 17 4.2.3 DEVIATION FROM TEST STANDARD .................................................................. 18 4.2.4 TEST SETUP ......................................................................................................... 18 4.2.5 EUT OPERATING CONDITIONS ........................................................................... 19 4.2.6 TEST RESULTS .................................................................................................... 19 5. RADIATED BAND EMISSIONMEASUREMENT ....................................................... 28 5.1 TEST RE…

Text truncated - open the document above for the full version.