Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 2.98 mW |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesOutput power is maximum peak conducted. <br>
This device has integrated DSS and DTS transmitters certified under the same
FCC ID. <br>
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for
this transmitter must be installed to provide a separation distance of at least
20cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter. Approval is limited to OEM installation
only. OEM integrators must be provided with antenna installation instructions.
OEM integrators and end-users must be provided with transmitter operating
conditions for satisfying RF exposure compliance. This grant is valid only when
the device is sold to OEM integrators and the OEM integrators are instructed to
ensure that the end user has no manual instructions to remove or install the
device. Only the antenna(s) listed in this filing can be used with this device.
Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).
The host integrator installing this module into their product must ensure that the
final composite product complies with the FCC requirements by a technical
assessment or evaluation to the FCC rules, including the transmitter operation
and should refer to guidance in KDB 996369.