Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|
| 4 | 15E | 5.75 GHz - 5.83 GHz | 178.00 mW |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesOutput power is maximum average conducted. <br>
This device supports IEEE 802.11 a/n/ac/ax 20, 40, 80 and 160 MHz channel
bandwidths. <br>
This device supports 2T2R MIMO.<br>
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this
transmitter must be installed to provide a separation distance of at least 20cm from
all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter. Approval is limited to OEM installation only. OEM
integrators must be provided with antenna installation instructions. OEM integrators
and end-users must be provided with transmitter operating conditions for satisfying
RF exposure compliance. This grant is valid only when the device is sold to OEM
integrators and the OEM integrators are instructed to ensure that the end user has
no manual instructions to remove or install the device. Only the antenna(s) listed in
this filing can be used with this device. Use of additional antenna(s) are subject to
the requirements of 15.204(c)(4). <br>
The host integrator installing this module into their product must ensure that the
final composite product complies with the FCC requirements by a technical
assessment or evaluation to the FCC rules, including the transmitter operation and
should refer to guidance in KDB 996369.