2BDOG-G19-AQI2Fast Wireless Charging

Instructions Fast Wireless Charging Parameters: Type C charging interface Please read the instructions carefully before using Fast charging with 15W output. Custom made magnet array, precisely compatible for iPhone 15/14/13/12 series phones. 360 degree rotation for your optimal viewing angle. Cradleless design, easy to hold and remove the phone. Features: Package includes a high ecient Type C charging cable. Product specication: Instructions: Charging Cable Air vent mount Magnetic charging head φ65 mm φ 55 mm Metal ring with double side sticker Instructions: Work for most phones and cases Note: The sticky metal ring does not stick well to textured, leather or liquid silicone phone cases. 1. For iPhone 15/14/13/12 series case free or with magsafe case, attach to magnetic mount directly without the metal ring. 2. For iPhone 15/14/13/12 series with regular case or for other phones,need to stick the metal ring to center of the back of the case. Magnetic charging head: 115-205KHZ(5W, 7.5W), 360KHZ(15W) 2BDOG-G19-AQI2 15W (Max) 5V / 3A 9V / 2.2A 12V / 1.67A Voltage Output FCC ID Charging frequency 1-3mm Induction Distance 1. Insert the adjuster into ball joint of air vent mount, insert the ball into the socket at the back of magnet head, turn the adjuster to tighten. 2. Insert the hook into the car air outlet vane and tighten to lock. when you hear 'clatter' sounds, it means the mount has been xed tightly. Attentions 1. Please use the product correctly according instructions. 4. Please do not put wireless charger close to cards with magnetic stripes or chips (ID card,credit card etc.) to avoid demagnetization 5. Please keep wireless charger at least 20 CM distance away from implantable medical device (heart pacemaker, Implantable cochlea etc.) to avoid potential interferences. 6. Please do safekeeping, do not let your kids treat wireless charger as toy to avoid unwanted accidents. The pictures only supplies the reference, please take the actual product as the standard. 2. Please do not disassemble the product or throw it to re and water, to avoid leakage that caused by electrical short circuit. 3. Please do not use wireless charger in high temperature, wet, corrosive environment, to avoid leakage that caused by damaged circuit. 4. Put the phone on the magnet head, adjust the best viewing angle. 3. Connect the charging cable to the charging interface. FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The equipment complies with FCC Radiation exposure limit set forth for an uncontrolled environment. The equipment should be installed and operated with a minimum distance of 20cm FCC ID: 2BDOG-G19-AQI2 FCC WARNING:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. between the product and your body. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. please refer to the gift box selected model as exact product) 32 mm

2BDOG-G19-AQI2

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: DongGuan ChuangJie Electronics Co., Ltd. Grantee code: 2BDOG FRN: 0034510768 FCC ID: 2BDOG-G19-AQI2 Contact Name: Susan hu Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City, China. Telephone No: 0769-82098688-8116 Fax No: 0769-82995889 Email: [email protected] i. [DongGuan ChuangJie Electronics Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ DongGuan ChuangJie Electronics Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. DongGuan ChuangJie Electronics Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 07.26.2024 Applicant’s Name: Susan hu Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

DongGuan ChuangJie Electronics Co., Ltd. Product Similarity Declaration Product name: Fast Wireless Charging Model name: G19-AQi2, G19-A FCC ID: 2BDOG-G19-AQI2 We (DongGuan ChuangJie Electronics Co., Ltd.) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: Susan hu Title: Manager Date: 7.26.2024

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: DongGuan ChuangJie Electronics Co., Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City, China. Product Name: Fast Wireless Charging Model Number: G19-AQi2, G19-A FCC Identifier: 2BDOG-G19-AQI2 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Susan hu Date: 7/26/2024 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 DongGuan ChuangJie Electronics Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 7/26/2024 Subject: Request for Confidentiality FCC ID: 2BDOG-G19-AQI2 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Susan hu Title: Manager

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT (External Photos) Model: G19-AQi2 Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected]

F a s t W i r e l e s s C h a r g i n g I n p u t : 5 V 3 A 9 V 2 . 2 A 1 2 V 1 . 6 7 A O u t p u t : 1 5 W ( m a x ) F C C I D : 2 B D O G - G 1 9 - A Q I 2 M A D E I N C H I N A

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: G19-AQi2 Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected] Coil Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel : (86-755) 88850135-1349 Fax: (86-755) 88850136 We b : http://www.mtitest.cn E-mail: [email protected]

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Test Report Report No.: MTi240507014-05E2 Date of issue: 2024-05-28 Applicant: DongGuan ChuangJie Electronics Co., Ltd. Product: Fast Wireless Charging Model(s): G19-AQi2, G19-A FCC ID: 2BDOG-G19-AQI2 Shenzhen Microtest Co., Ltd. http://www.mtitest.cn Page 2 of 15 Report No.: MTi240507014-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 15 Report No.: MTi240507014-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Contents 1 General Description ........................................................................................................................ 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 6 1.3 Description of support units ................................................................................................................................ 7 2 Measurement uncertainty ............................................................................................................... 7 3 Test facilities and accreditations .................................................................................................... 8 3.1 Test laboratory .................................................................................................................................................... 8 4 List of test equipment ..................................................................................................................... 9 5 Test result ...................................................................................................................................... 10 5.2 Test setup ......................................................................................................................................................... 11 5.3 Test Procedures ................................................................................................................................................ 11 5.4 Information of test equipment ........................................................................................................................... 12 5.5 Test results ....................................................................................................................................................... 13 Photographs of the Test Setup ............................................................................................................ 15 Photographs of the EUT....................................................................................................................... 15 Page 4 of 15 Report No.: MTi240507014-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Test Result Certification Applicant: DongGuan ChuangJie Electronics Co., Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Manufacturer: DongGuan ChuangJie Electronics Co., Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Product description Product name: Fast Wireless Charging Trademark: N/A Model name: G19-AQi2 Series Model: G19-A Standards: FCC CFR 47 PART 1, § 1.1310 Test method: KDB 680106 D01 Wireless Power Transfer v04 Date of Test Date of test: 2024-05-25 to 2024-05-26 Test result: Pass Test Engineer : (James Qin) Reviewed By : (David Lee) Approved By : (Leon Chen) Page 5 of 15 Report No.: MTi240507014-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Fast Wireless Charging Model name: G19-AQi2 Series Model: G19-A Model difference: All the models are the same circuit and module, except the model name. Electrical rating: Input: 5V/3A, 9V2.2A, 12V/1.67A Output: 15W(MAX) Accessories: Cable: USB-C to USB-C Cable 100cm Hardware version: V1.0 Software version: V1.3 Test sample(s) number: MTi240507014-05S1001 RF specification: Operation frequency: 115-205kHz(5W, 7.5W), 360kHz(15W) Modulation type: ASK Antenna type: Coil Page 6 of 15 Report No.: MTi240507014-05E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, Chin…

Text truncated - open the document above for the full version.

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Test Report Report No.: MTi240507014-05E1 Date of issue: 2024-07-16 Applicant: DongGuan ChuangJie Electronics Co., Ltd. Product: Fast Wireless Charging Model(s): G19-AQi2, G19-A FCC ID: 2BDOG-G19-AQI2 Shenzhen Microtest Co., Ltd. http://www.mtitest.cn Page 2 of 27 Report No.: MTi240507014-05E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 27 Report No.: MTi240507014-05E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Table of contents 1 General Description ......................................................................................................................... 5 1.1 Description of the EUT ............................................................................................................................... 5 1.2 Description of test modes .......................................................................................................................... 5 1.3 Environmental Conditions .......................................................................................................................... 6 1.4 Description of support units ....................................................................................................................... 6 1.5 Measurement uncertainty .......................................................................................................................... 6 2 Summary of Test Result .................................................................................................................. 7 3 Test Facilities and accreditations ................................................................................................... 8 3.1 Test laboratory ........................................................................................................................................... 8 4 List of test equipment ...................................................................................................................... 9 5 Evaluation Results (Evaluation) .................................................................................................... 10 5.1 Antenna requirement ............................................................................................................................... 10 6 Radio Spectrum Matter Test Results (RF) .................................................................................... 11 6.1 Conducted Emission at AC power line .................................................................................................... 11 6.2 20dB Occupied Bandwidth ...................................................................................................................... 14 6.3 Emissions in frequency bands (below 30MHz)........................................................................................ 18 6.4 Emissions in frequency bands (30MHz - 1GHz)...................................................................................... 23 Photographs of the test setup ............................................................................................................. 26 Photographs of the EUT....................................................................................................................... 27 Page 4 of 27 Report No.: MTi240507014-05E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Test Result Certification Applicant: DongGuan ChuangJie Electronics Co., Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Manufacturer: DongGuan ChuangJie Electronics Co., Ltd. Address: No.8, Jinxing Road, Jinfenghuang Industrial District, Fenggang Town, Dongguan City Product description Product name: Fast Wireless Charging Trade mark: N/A Model name: G19-AQi2 Series Model(s): G19-A Standards: 47 CFR Part 15C Test Method: ANSI C63.10-2013 Date of Test Date of test: 2024-05-25 to 2024-07-16 Test result: Pass Test Engineer : (James Qin) Reviewed By : (David Lee) Approved By : (Leon Chen) Page 5 of 27 Report No.: MTi240507014-05E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: Fast Wireless Charging Model name: G19-AQi2 Series Model(s): G19-A Model difference: All the models are the same circuit and module, except the model name. Electrical rating: Input: 5V/3A, 9V2.2A, 12V/1.67A Output: 15W(MAX) Accessories: …

Text truncated - open the document above for the full version.

承 認 書 客 戶： CUSTOMER: 东莞创杰电子 DongGuan ChuangJie Electronics Co., Ltd. 客 戶 料 號： CUST P/N: 制造商 Manufacturer 东莞创杰电子 DongGuan ChuangJie Electronics Co., Ltd. 三 盛 料 號： FINE P/N: 磁吸线圈 7.7uH/0.08*72P*11TS 産 品 型 號： DESC: Φ43.5MMX5.3MMX0.8MM 开槽 日 期： DATE: 2024.03.19 版 本： Version: A.0 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE 林素玲 安帅印 安帅印 版本變更履歷 Version Change History 版本 Rev. 變 更 前 Before Change 變 更 後 After Change 更 改 日 期 Change Date 批 准 Approved By A.0 新发行 ---- 2024.03.19 安帅印 SPECIFICATION 産 品 型 號： DESC Φ20.5x41-7.7uH-0.08x72P- 版本 Rev：A.0 客戶 CUST: XXX 客户料号 CUST P/N: 一、尺寸DIMENSION:(mm) A 43.5±1.0 B 20.5±0.5 C 1.25 Max D 10±2 E 3±1 F 43.5±0.5 G 10.0 ref H 2.0 Max I 5.3 ref M 8.0 ref J 42±1 K 3.0±1 Note: 二、原理图 SCHEMATIC DIAGRAM: 1.交叉出线; Cross outlet 2.出线位置缠8mm(ref)宽度高 温胶纸 1-2Ts; Wrap 8mm(ref) wide high-temperature adhesive tape for 1-2Ts at the outlet position. 3.线圈贴圆形硬磁片带槽，磁 片尺寸 43.5±0.5mm,内孔 5.3 ±0.5mm,厚度为 0.8±0.1mm. The coil is attached with a circular hard magnetic sheet with a slot, the size of the magnetic sheet is 43.5±0.5mm, the inner hole is 5.3±0.5mm, and the thickness is 0.8± 0.1 mm. 4.线圈背面贴双面胶 Stick double-sided tape on the back of the coil. 三、绕线参数 Winding Specification: 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度 RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F 4.7uH ±10%单独线圈 100KHz/1.0V LCZ METER 1062B 2 IND. S-F 7.7uH ±10%加磁片 100KHz/1.0V LCZ METER 1062B 3 DCR S-F ≤50mΩ 100KHz/1.0V LCZ METER 502B 4 Q S-F ≥75 100KHz/1.0V LCZ METER 502B 擬制/日期 PREPARED BY/DATE 審核/日期 CHECKED BY/DATE 林素玲 2024.03.19 安帅印 2024.03.19 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 热风线 0.08*72P 11Ts CCW

Page 1 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Photographs of the test setup Model: G19-AQi2 Conducted Emission at AC power line Emissions in frequency bands (below 30MHz) Page 2 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.cn E-mail: [email protected] Emissions in frequency bands (30MHz - 1GHz) MPE