
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Shenzhen Kushang Industry Technology Co.,Ltd 410 Huafeng International Electronic Innovation Park, Yintian, Xixiang, Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024-4-20 U.S. Agent Designation Shenzhen Kushang Industry Technology Co.,Ltdacknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID:2BE9R-FILAPULSE): Name and company of U.S. agent:ACT Lab LLC Physical U.S. address of agent:3280 East 59th Street Long Beach, CA 90805 United States FRN of U.S. agent:0033465568 Email address of U.S. agent:[email protected] ACT Lab LLCacknowledges their obligation to accept service of process on behalf ofShenzhen Kushang Industry Technology Co.,Ltd. Shenzhen Kushang Industry Technology Co.,Ltdwith the FRN[0035058890]accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature Wang Cunhu manager Shenzhen Kushang Industry Technology Co.,Ltd Signature Scott Huber Senior Technical Director ACT Lab LLC 48_[model] US_Agent_2.911(d)(7)-U, V05
FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Photo 5 Appearance of EUT
FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Appendix IID Label Appendix II ID Label Location Smart watch FCC ID: 2BE9R-FILAPULSE Model: FILA Pulse
FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 6 Internal of EUT Photo 7 Internal of EUT FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Photo 8 Appearance of PCB & Battery Photo 9 Appearance of PCB & Battery FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Photo 10 Internal of Battery Photo 11 Appearance of PCB Antenna FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Photo 12 Appearance of PCB Photo 13 Appearance of PCB
Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202403-0239-3 Page: 1 of 3 TB-RF-074-1.0 1 A/F., Building.6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao’an, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2BE9R-FILAPULSE 1. Client Information Applicant : Shenzhen Kushang Industry Technology Co.,Ltd Address : 410 Huafeng International Electronic Innovation Park, Yintian, Xixiang, Bao'an District, Shenzhen, China Manufacturer : Shenzhen Kushang Industry Technology Co.,Ltd Address : 410 Huafeng International Electronic Innovation Park, Yintian, Xixiang, Bao'an District, Shenzhen, China 2. General Description of EUT EUT Name : Smart watch Model(s) No. : FILA Pulse, FILA TalkFit, FILA Apex, FILA Vibe, FILA Stride, FILA Aura, FILA Quest K10 Model Difference : All these models are identical in the same PCB, layout and electrical circuit, the only difference is appearance color. Product Description : Operation Frequency: Bluetooth 5.2: 2402MHz~2480MHz Number of Channel: 79 channels for Bluetooth(BR+EDR) 40 channels for Bluetooth LE Antenna Gain: 0dBi Wire Antenna Modulation Type: Bluetooth(BR+EDR) GFSK, Pi/4-DQPSK, 8-DPSK Modulation Type: Bluetooth LE GFSK Power Supply : USB Input: DC 5V/0.1A DC 3.7V 205mAh 0.758Wh Rechargeable Li-ion battery Software Version : V1.0 Hardware Version : V1.0 Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202403-0239-3 Page: 2 of 3 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√f (GHz) ] ≤7.5.0 for 10-g SAR Report No.: TBR-C-202403-0239-3 Page: 3 of 3 TB-RF-074-1.0 2. Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 1.972 1±1 2 1.585 0.491 3.0 2.441 1.795 1±1 2 1.585 0.495 3.0 2.480 1.398 1±1 2 1.585 0.499 3.0 Bluetooth Mode (Pi/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 2.216 2±1 3 1.995 0.618 3.0 2.441 2.092 2±1 3 1.995 0.623 3.0 2.480 1.637 1±1 2 1.585 0.499 3.0 Bluetooth Mode (8-DPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 2.757 2±1 3 1.995 0.618 3.0 2.441 2.650 2±1 3 1.995 0.623 3.0 2.480 2.167 2±1 3 1.995 0.628 3.0 Test separation: 5mm Bluetooth LE Mode (1M) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 1.892 1±1 2 1.585 0.491 3.0 2.440 1.215 1±1 2 1.585 0.495 3.0 2.480 0.813 0±1 1 1.259 0.397 3.0 Bluetooth LE Mode (2M) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2.402 1.910 1±1 2 1.585 0.491 3.0 2.440 1.657 1±1 2 1.585 0.495 3.0 2.480 1.153 1±1 2 1.585 0.499 3.0 The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF THE REPORT-----
V . S .W . R< 1.4 Polarization TypeV ertical & Horizontal Frequenc Range2400 ~ 2500GHz Input Impendence(ohm)50 Efficiency (dB)0 -3.6 Maximum Power (dBm)0 (XY-plane) Gain (dBi) 0 Peak EIRP(dBm)0 Tot. Rad. Pwr. (dBm)-1.2 (Input pwr – loss pwr) Product specification Quick Reference Date Antenna module on the system board Ant. Port Input Pwr. (dBm)0 (Typ. BT class 2 output power) Directivity (dBi) -1 (all direction antenna) Minimum Power (dBm) (XY-plane) Avg. Power (dBm) (XY-plane) All the technical data and information contained herein are subject to change without prior notice Antenna Layout & module on the system board Antenna Gain Gain Table Unit in dBi 2.4G-2.5G XY-planeXZ-planeYZ-plane Efficiency Peak Avg. Peak Avg. Peak Avg. Module Board -0.5-3.0 0.00 -1.3 -1.5 Manufacturer: Shenzhen Hualu Electronics Co. , Ltd Add:South of Lotus Hill, Caitian Road, Futian District, Shenzhen, China Return Loss The Environment of Antenna Radiation Pattern 3D radiation pattern diagram XY-planeXZ-planeYZ-plane
Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 1 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 RF Test Data for Bluetooth(BR+EDR) (Conducted Measurements) General Description of EUT Product Name: Smart watch Test Model: FILA Pulse Sample ID: HC-C-202403-0386-01-01-2# Environmental Conditions Temperature: 23.8°C Relative Humidity: 48% Test Voltage: DC 3.7V Test Engineer: ZKN ZHOU Note: For a more detailed features description, please refer to the report TBR-C-202403-0386-3 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 2 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 31.15 5.07 2.63 NVNT 1-DH1 2441 Ant1 31.15 5.07 2.63 NVNT 1-DH1 2480 Ant1 30.89 5.1 2.63 NVNT 2-DH1 2402 Ant1 31.45 5.02 2.56 NVNT 2-DH1 2441 Ant1 31.71 4.99 2.56 NVNT 2-DH1 2480 Ant1 30.89 5.1 2.63 NVNT 3-DH1 2402 Ant1 31.45 5.02 2.56 NVNT 3-DH1 2441 Ant1 30.89 5.1 2.63 NVNT 3-DH1 2480 Ant1 31.45 5.02 2.56 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 3 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 4 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 5 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 6 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 7 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 8 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 1.972 21 Pass NVNT 1-DH1 2441 Ant1 1.795 21 Pass NVNT 1-DH1 2480 Ant1 1.398 21 Pass NVNT 2-DH1 2402 Ant1 2.216 21 Pass NVNT 2-DH1 2441 Ant1 2.092 21 Pass NVNT 2-DH1 2480 Ant1 1.637 21 Pass NVNT 3-DH1 2402 Ant1 2.757 21 Pass NVNT 3-DH1 2441 Ant1 2.650 21 Pass NVNT 3-DH1 2480 Ant1 2.167 21 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 9 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Test Graphs Power NVNT 1-DH1 2402MHz Ant1 Power NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 10 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Power NVNT 1-DH1 2480MHz Ant1 Power NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 11 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Power NVNT 2-DH1 2441MHz Ant1 Power NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 12 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Power NVNT 3-DH1 2402MHz Ant1 Power NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 13 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Power NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202403-0386-3 Page: 14 of 68 FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 3. -20dB Bandwidth Condition Mode Frequency (MHz) Antenna -20 dB Bandwidth (MHz) Limit -20 dB Bandwidth (MHz) Verdict NVNT 1-DH1 2402 Ant1 0.94 ---- Pass NVNT 1-DH1 2441 Ant1 0.95 ---- Pass NVNT 1-DH1 2480 Ant1 0.95 ---- Pass NVNT 2-DH1 2402 Ant1 1.25 ---- Pass NVNT 2-DH1 2441 Ant1 1.24 ---- Pass NVNT 2-DH1 2480 Ant1 1.23 ---- Pass NVNT 3-DH1 2402 Ant1 1.22 ---- Pass NVNT 3-DH1 2441 Ant1 1.20 ---- Pass NVNT 3-DH1 2480 Ant1 1.21 ---- Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add:1/F.,Building 6, Rundongshen…
Text truncated - open the document above for the full version.
Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202403-0386-3 Page: 1 of 48 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Test Report FCC ID: 2BE9R-FILAPULSE Report No. : TBR-C-202403-0386-3 Applicant : Shenzhen Kushang Industry Technology Co.,Ltd Equipment Under Test (EUT) EUT Name : Smart watch Model No. : FILA Pulse Series Model No. : FILA TalkFit, FILA Apex, FILA Vibe, FILA Stride, FILA Aura, FILA Quest K10 Brand Name : ---- Sample ID : HC-C-202403-0386-01-01-1#&HC-C-202403-0386-01-01-2# Receipt Date : 2024-04-11 Test Date : 2024-04-11 to 2024-04-19 Issue Date : 2024-04-19 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10:2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Tested By : ZKN ZHOU Reviewed By : Wade. Lv Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202403-0386-3 Page: 2 of 48 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 6 1.1 Client Information ................................................................................................................. 6 1.2 General Description of EUT (Equipment Under Test) ................................................... 6 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 8 1.4 Description of Support Units .............................................................................................. 8 1.5 Description of Test Mode .................................................................................................... 9 1.6 Description of Test Software Setting .............................................................................. 10 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 11 2. TEST SUMMARY ..................................................................................................................... 12 3. TEST SOFTWARE ................................................................................................................... 12 4. TEST EQUIPMENT AND TEST SITE ................................................................................... 13 5. CONDUCTED EMISSION ....................................................................................................... 15 5.1 Test Standard and Limit .................................................................................................... 15 5.2 Test Setup ........................................................................................................................... 15 5.3 Test Procedure ................................................................................................................... 15 5.4 Deviation From Test Standard ......................................................................................... 16 5.5 EUT Operating Mode ........................................................................................................ 16 5.6 Test Data ............................................................................................................................. 16 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 17 6.1 Test Standard and Limit .................................................................................................... 17 6.2 Test Setup ........................................................................................................................... 19 6.3 Test Procedure ................................................................................................................... 20 6.4 Deviation From Test Standard ......................................................................................... 21 6.5 EUT Operating Mode ........................................................................................................ 21 6.6 Test Data ............................................................................................................................. 21 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 22 7.1 Test Standard and Limit .................................................................................................... 22 7.2 Test Setup ........................................................................................................................... 22 7.3 Test Procedure ................................................................................................................... 23 Report No.: TBR-C-202403-0386-3 Page: 3 of 48 TB-RF-074-1.0 7.4 Deviation From Test Standard ......................................................................................... 24 7.5 EUT Operating Mode ........................................................................................................ 24 7.6 Test Data ............................................................................................................................. 24 8. 99% OCCUPIED AND 20DB BANDWIDTH ........................................................................ 25 8.1 Test Standard and Limi…
Text truncated - open the document above for the full version.
FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2BE9R-FILAPULSE TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Conducted Emission -----END OF THE REPORT-----
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 1.90 mW |

Smart watch
Equipment Class
DSS - Part 15 Spread Spectrum Transmitter