2BEES-M2S818HSThree axis stabilizer

M2 3-axis Merak Two Pro 1SP 1. Preparation 1.Roll axis 2. Pitch axis 3. Folding shaft 4. Course axis 5.Trigger 6.Type-C charging port 7. Direction 8.Mode This product is a three-axis stabilizer specially designed for mobile phones. It can assist mobile phones in shooting, effectively eliminate the picture shake caused by the external environment in the shooting process, and provide stable and smooth images. The stabilizer operation is simple and clear, the elderly and children can get started, can meet all the hobbyof mobile phone photography crowd use. The stabilizer can suppo horizontal and vertical shooting of the mobile phone and can control the direction button to manually adiust the shooting Angle of the mobile phone. to meet the requirements of shooting and video production. 9.Power 10.Indicator light PF: semi-following mode L: lock mode F: Full follow mode POV: pov mode Q: Battery display 11. AI module 2. Recognition stabilizer ios: Search for“Gimbal Play ”in the APP Store Android:Search for“Gimbal Play ”in the Google Apps Scan code to download “Gimbal Play”app Bluetooth connection: When using the APP, the Bluetooth name M2 will pop up in the APP. Click to confirm pairing. When using the native camera, search for the Bluetooth name M2 in Settings-Bluetooth and click to connect and pair. · Quick Start GuideEN 1 1 5. Adjustment balance 5IF
QIPOF
DMJQ
TUSFUDIFT
GSPN
TJEF
UP
TJEF
1IPOF
MFOT
GBDJOH
VQ 1 3PVHIMZ
DFOUFSFE
DMBNQ 2 1SFTT
BOE
IPME
UIF
QPXFS
CVUUPO GPS

TFDPOET
UP
QPXFS
PO 3 3. Charging Use the standard USB Type-C data cable to connect to the USB charger to charge the gimbal. During charging, all display lights flash from right to left in a cycle, and all lights turn on when fully charged. 4. Installing a Mobile Phone Unfold the cradle head and release the locking state of pitchshaft, heading shaft and phone clip · Quick Start GuideEN 2 2 Power M-Mode Trigger/photo Focus 5. Function of the button 6. AI module gesture Battery light Q Indicator light Note: Push the stick up and down in POV mode to enter Inception mode. Arrow Press and hold for 3 seconds to power on/off.Click to switch between horizontal and vertical shots.Double-click to center/reset. Push upward in the direction of W to enlarge the focal length in the APP,push downward in the direction of T to reduce the focal length in the APP. The Q light is always green and the battery has sufficient power.The Q light flashes green, battery power is medium.The Q light is always on red, the battery is low and needs to be charged. PF: Half following mode, yaw axis motor follows. L: Locking mode, the three motors are locked and do not follow. F: Full following mode, yaw axis motor and tilt axis motor follow. POV: Pov mode, three motors follow at the same time. Adjust the gimbal in four directions: up, down, left and right. Click once and a half to follow mode.Click twice to lock mode.Click three times for full follow mode.Click the pov mode four times/push the direction keys up and down in the pov mode to achieve the Inception mode. Click the camera button to take photos/record videos.Double-click the camera button to switch between the front and rear lenses of the phone.Triple-click the photo button to take a photo - video exchange. Long press the camera button to record directly. 4UBSU
5SBDLJOH 0,
HFTUVSF 4UPQ
5SBDLJOH 1BMN
HFTUVSF -JHIUT
0OP 5IVNC
MJUUMF
OHFS )PSJ[POBM7FSUJDBM %PVCMF
-JLF
HFTUVSF 5BLJOH
1JDUVSFT 5IVNC
JOEFY
OHFS -JHIU
6Q -JLF
HFTUVSF · Quick Start GuideEN 3 3 7. Specification Fold the head and release the locking state of pitch shaft, heading shaft and phone clip. 8. Folding Charge Voltage Charge C urrent Working C urrent Working Voltage Working Temps Working Hour s Net Weight Compatible Payload Weight Battery Cap acity Twisting Pitching Heading Accessorylnterface 5V <2000MA 200-2000MA 3.7V 0-40° 5-8hours 335g <7inch phone 280g 2500mGN -100°~+220° -45°~45° -160°~160° 1/4 nipple · Quick Start GuideEN 4 4 Disclaimer and Safety lnstructions Safe Operation Guide Thank you for purchasing this device. Before using this product, please read the content of this article in detail. The content mentioned in this article is related to your safety and legal rights and responsibilities. Please use and set the product according to the requirements of this article. From the time vou start using this Product, vou are deemed to have read the disclaimer and warnings carefully. Understand, accept and accept all terms of this Statement. The Company shall not be responsible for any damage, injury or any legal liability caused by your direct or indirect use of the product. Users should follow all safety guidelines, including but not limited to those mentioned in the text. 1. The three-axis stabilizer is a non-waterproof product. Do not use the produci in the rain or wet environment, and do not put the product in water or get wet. Contact with liquid inside the product may cause corrosion reaction, which will cause spontaneous combustion of the battery, or even cause explosion. 2. lf the product is on fire, please extinguish the fire immediately to avoid serious losses. 3. Please use the product in an environment where the temperature is between 0 and 40°C. Do not heat the product. Too high or too low temperature may shorten the service life of the product 4. Please pay attention to product safety. Do not mechanically strike, roll or throw the product, and do not place heavy objects on the product. 5. Do not disassemble the product in any way. lf the battery is puncted during disassembly, the liquid inside the battery will leak out, or even cause fire and explosion. 6. lf the battery is not used for a long time, discharge the battery to 40%-65% power and store it. Do not store the product for a long time after thorough discharge, lest the battery overdischarge, damage the cell and cannot be used. Re-discharge every three months or so to keep the battery alive. CERTIFICATION This product has been strictly i…

Text truncated - open the document above for the full version.

Shenzhen Huisheng Technology Co., Ltd U.S.Agent Designation for Service of Process (Applicant and U.S.Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: SUN BEYOND CONSULTING LTD FRN: 0033598426 Contact Name: Wenchao Xiang Street Address: OFFICE NO.448, 4TH FLOOR, 90 CANAL STREET City/Province/Zip: BOSTON, MA 02114 Telephone No: (151) 287-9145 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S.Agent Signature: Date: 2024/9/11 Signed by (Printed Name/Title): TheApplicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S.Agent information above changes. Applicant Company name:Shenzhen Huisheng Technology Co., Ltd Grantee Code: 2BEES FCC ID: 2BEES-M2S818HS FRN: 0034704536 Contact Name: LI JINSHUN Address: Floor 3, jianan Road 25, Fuhai Street, Baoan District, shenzhen City China Telephone No: 8613302458729 Email: [email protected] Applicant Signature: Date: 2024/9/11 Signed by (Printed Name/Title): LI JINSHUN / Manager

Shenzhen Huisheng Technology Co., Ltd 2024/9/11 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2BEES-M2S818HS) [Shenzhen Huisheng Technology Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) LI JINSHUN Shenzhen Huisheng Technology Co., Ltd 2024/9/11 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2BEES-M2S818HS) [Shenzhen Huisheng Technology Co., Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) LI JINSHUN

Shenzhen Huisheng Technology Co., Ltd 2024/9/11 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Three axis stabilizer Trademark: N/A MODEL:M2pro, M1, M1pro, M2, M3, M3pro, M8, M8pro, M9, M9pro, F6, F8, F10, F10pro, F11, F11pro FCC ID: 2BEES-M2S818HS To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title: LI JINSHUN / Manager Contact information / address: Floor 3, jianan Road 25, Fuhai Street, Baoan District, shenzhen City China

Shenzhen Huisheng Technology Co., Ltd 2024/9/11 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION EUT NAME: Three axis stabilizer Trademark: N/A MODEL:M2pro, M1, M1pro, M2, M3, M3pro, M8, M8pro, M9, M9pro, F6, F8, F10, F10pro, F11, F11pro FCC ID: 2BEES-M2S818HS To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title: LI JINSHUN / Manager Contact information / address: Floor 3, jianan Road 25, Fuhai Street, Baoan District, shenzhen City China

Shenzhen Huisheng Technology Co., Ltd 2024/9/11 EUT NAME: Three axis stabilizer Trademark: N/A MODEL:M2pro, M1, M1pro, M2, M3, M3pro, M8, M8pro, M9, M9pro, F6, F8, F10, F10pro, F11, F11pro FCC ID: 2BEES-M2S818HS All the model are the same circuit and RF module, except model names. Sincerely Client’s signature: Client’s name / title: LI JINSHUN / Manager Contact information / address: Floor 3, jianan Road 25, Fuhai Street, Baoan District, shenzhen City China

External Photos

Size:10*4mm FCC ID: 2BEES-M2S818HS Label location

Internal Photos Antenna

FCC ID: 2BEES-M2S818HS RF exposure evaluation §2.1093 Radiofrequency radiation exposure evaluation: Portable Devices. According to§15.247(i) and§1.1307b(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the commission’s guidance. The 1-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  When the minimum test separation distance is < 5 mm, a distance of 5 mm according is applied to determine SAR test exclusion.  The result is rounded to one decimal place for comparison  GFSK Modulation Frequency (MHz) Max. Power (dBm) Max. Tune up Power (dBm) Max. Tune up Power (mW) Test distance (mm) Result exclusion thresholds for 1-g SAR GFSK(1Mbps) 2402 1.39 2.0 1.58 5 0.50 3.0 Conclusion: For the max result: 0.50W/Kg ≤ FCC Limit 3.0 for 1g SAR.

Page 1 of 18 Test Report Verified code: Report No.: E20230306359801-1 Customer: Guangdong Bestcore Internet of Things Technology CO., Ltd Address: Room1501,15F,ShuMao Building,6 Xiangxing Road, Torch Development District,Zhong shan Sample Name: Bluetooth Module Sample Model: BC204 Receive Sample Date: Mar.07,2023 Test Date: Mar.07,2023 ~ Mar.07,2023 Reference Document: ANSI IEEE 149-2021 Part 7, Part 8, Part 10 Test Result: Not make judgment Prepared by: Reviewed by: Approved by: GRG METROLOGY & TEST GROUP CO., LTD. Issued Date: GRG METROLOGY & TEST GROUP CO., LTD. Address: No.163,Pingyun Road, West of Huangpu Avenue, Guangzhou, Guangdong, China Tel：（+86）400-602-0999 FAX：（+86）020-38698685 Web：http://www.grgtest.com 348480 2023-03-09 Report No.: E20230306359801-1 Page 2 of 18 Statement 1. The report is invalid without "special seal for inspection and testing"; some copies are invalid; The report is invalid if it is altered or missing; The report is invalid without the signature of the person who prepared, reviewed and approved it. 2. The sample information is provided by the client and responsible for its authenticity; The content of the report is only valid for the samples sent this time. 3. When there are reports in both Chinese and English, the Chinese version will prevail when the language problems are inconsistent. 4. If there is any objection concerning the report, please inform us within 15 days from the date of receiving the report. 5. Without the agreement of the laboratory, the client is not authorized to use the test results for unapproved propaganda. ------------ The following blanks ------------ Report No.: E20230306359801-1 Page 3 of 18 TABLE OF CONTENTS 1. TEST RESULT SUMMARY ...................................................................................................................... 5 2. GENERAL DESCRIPTION OF EUT ......................................................................................................... 6 2.1 APPLICANT INFORMATION ...................................................................................................................... 6 2.2 MANUFACTURER ........................................................................................................................................ 6 2.3 FACTORY ...................................................................................................................................................... 6 2.4 BASIC DESCRIPTION OF EUT ................................................................................................................... 6 2.5 TEST SCENE .................................................................................................................................................. 6 2.6 SAMPLE WORK DESCRIPTION ................................................................................................................. 6 2.7 ASSISTIVE DEVICE INFORMATION......................................................................................................... 7 2.8 SAMPLE CONNECTION DIAGRAM .......................................................................................................... 7 3. LABORATORY .......................................................................................................................................... 8 4. MEASUREMENT UNCERTAINTY .......................................................................................................... 9 5. EQUIPMENT AND TOOLS USED DURING TEST .............................................................................. 10 6. ANTENNA RADIATION PERFORMANCE MEASUREMENT ........................................................... 11 6.1 LIMITS ......................................................................................................................................................... 11 6.2 TEST PROCEDURE ..................................................................................................................................... 11 6.3 CONFIGURATION OF SYSTEM UNDER TEST ...................................................................................... 12 6.4 TEST PHOTOS ............................................................................................................................................. 12 6.5 TEST RESULTS ........................................................................................................................................... 13 7. PHOTOGRAPH OF THE EUT ................................................................................................................. 17 ------------ The following blanks ------------ Report No.: E20230306359801-1 Page 4 of 18 REPORT ISSUED HISTORY Report Version Report No. Description Compile Date 1.0 E20230306359801-1 Original Issue 2023-03-07 ------------ The following blanks ------------ Report No.: E20230306359801-1 Page 5 of 18 1. TEST RESULT SUMMARY Test Item Test Frequency Test Method Test Scene Test Result Gain 2400 MHz ~2500MHz ANSI IEEE 149-2021 Part 8 scene 1 / 1) Radiation efficiency 2400 MHz ~2500MHz ANSI IEEE 149-2021 Part 10 scene 1 / 1) Radiation pattern 2400 MHz ~2500MHz ANSI IEEE 149-2021 Part 7 scene 1 / 1) Note 1)：Customer-defined test, test results do not make judgment. ------------ The following blanks ------------ . Report No.: E20230306359801-1 Page 6 of 18 2. GENERAL DESCRIPTION OF EUT 2.1 APPLICANT INFORMATION Name: Guangdong Bestcore Internet of Things Technology CO., Ltd Address: Room1501,15F,ShuMao Building,6 Xiangxing Road, Torch Development District,Zhong shan 2.2 MANUFACTURER Name: Guangdong Bestcore Internet of Things Technology CO., Ltd Address: Room1501,15F,ShuMao Building,6 Xiangxing Road, Torch Development District,Zhong shan 2.3 FACTORY Name: Guangdong Bestcore Internet of Things Technology CO., Ltd Address: Room1501,15F,ShuMao Building,6 Xiangxing Road, Torch Development District,Zhong shan 2.4 BASIC DESCRIPTION OF EUT Product Name: Bluetooth Module Produc…

Text truncated - open the document above for the full version.

No.：BCTC/RF-EMC-005 Page: 1 of 53 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2408826998E Applicant: Shenzhen Huisheng Technology Co., Ltd Product Name: Three axis stabilizer Test Model: M2pro Tested Date: 2024-08-05 to 2024-08-28 Issued Date: 2024-08-28 Report No.: BCTC2408826998E No.：BCTC/RF-EMC-005 Page: 2 of 53 Edition：B.2 FCC ID: 2BEES-M2S818HS The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Three axis stabilizer Trademark: N/A Model/Type Reference: M2pro M1, M1pro, M2, M3, M3pro, M8, M8pro, M9, M9pro, F6, F8, F10, F10pro, F11, F11pro Prepared For: Shenzhen Huisheng Technology Co., Ltd Address: Floor 3, jianan Road 25, Fuhai Street, Baoan District, shenzhen City China Manufacturer: Shenzhen Huisheng Technology Co., Ltd Address: Floor 3, jianan Road 25, Fuhai Street, Baoan District, shenzhen City China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-08-05 Sample Tested Date: 2024-08-05 to 2024-08-28 Issue Date: 2024-08-28 Report No.: BCTC2408826998E Test Standards: FCC Part15.247 ANSI C63.10-2013 Test Results: PASS Remark: This is Bluetooth BLE radio test report. Tested by: Approved by: Min Zhi Cheng/ Project Handler Zero Zhou/Reviewer Report No.: BCTC2408826998E No.：BCTC/RF-EMC-005 Page: 3 of 53 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 9 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List ........................................................................................................ 10 4.5 Test Mode ........................................................................................................... 10 4.6 Table of parameters of text software setting ....................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test procedure .................................................................................................... 13 6.4 EUT Operating Conditions .................................................................................. 13 6.5 Test Result .......................................................................................................... 14 7. Radiated Emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test procedure .................................................................................................... 18 7.4 EUT operating Conditions ................................................................................... 19 7.5 Test Result .......................................................................................................... 19 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 24 8.1 Block Diagram Of Test Setup .............................................................................. 24 8.2 Limit .................................................................................................................... 24 8.3 Test Procedure ................................................................................................... 25 8.4 EUT Operating Conditions .................................................................................. 26 8.5 Test Result .......................................................................................................... 26 9. Power Spectral Density Test ............................................................................... 27 9.1 Block Diagram Of Test Setup .............................................................................. 27 9.2 Limit .................................................................................................................... 27 9.3 Test procedure .................................................................................................... 27 9.4 EUT Operating Conditions ....................…

Text truncated - open the document above for the full version.

Report No.: BCTC2408826998E No.：BCTC/RF-EMC-005 Page: 51 of 53 Edition：B.2 15. EUT Test Setup Photographs Conducted emissions Report No.: BCTC2408826998E No.：BCTC/RF-EMC-005 Page: 52 of 53 Edition：B.2 Radiated Measurement Photos