2BFFA-L100C0Laser sweep and mop integrated robot

Dongguan Huicheng intelligent technology Co., LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Dongguan Huicheng intelligent technology Co., LTD Address: Room 101, No. 13, Jinling Road, Jinhe, Zhangmutou Town, Dongguan City, Guangdong Province, China Product Name: Laser sweep and mop integrated robot FCC ID: 2BFFA-L100C0 Model(s): L100C0, L100W0, L100X0, L101X0, D10S, D10S MAX, BL20, DL20, BL40 Max, DL40 Max, T20+, L20+, Q10 Pro, Cleanova W11, Cleanova W11 Lite, Cleanova W11 omni, Cleanova W11 Pro, Cleanova W10, Cleanova W10 Pro, Cleanova W10 max, Cleanova W10 +, Cleanova W10 Elite, D1, D1S, D1pro, D2, D2S, D2pro, D3, D3S, D3pro, D4, D4S, D4pro, D5, D5S, D5pro, D6, D6S, D6pro, D7, D7S, D7pro, D8, D8S, D8pro, D9, D9S, D9pro, D10, D10S, D10pro, D11, D11S, D11pro, D12, D12S, D12pro, D13, D13S, D13pro, D14, D14S, D14pro, D15, D15S, D15pro, D16, D16S, D16pro, D17, D17S, D17pro, D18, D18S, D18pro, D19, D19S, D19pro, D20, D20S, D20pro, D1 MAX, D1S MAX, D1pro MAX, D2 MAX, D2S MAX, D2pro MAX, D3 MAX, D3S MAX, D3pro MAX, D4 MAX, D4S MAX, D4pro MAX, D5 MAX, D5S MAX, D5pro MAX, D6 MAX, D6S MAX, D6pro MAX, D7 MAX, D7S MAX, D7pro MAX, D8 MAX, D8S MAX, D8pro MAX, D9 MAX, D9S MAX, D9pro MAX, D10 MAX, D10S MAX, D10pro MAX, D11 MAX, D11S MAX, D11pro MAX, D12 MAX, D12S MAX, D12pro MAX, D13 MAX, D13S MAX, D13pro MAX, D14 MAX, D14S MAX, D14pro MAX, D15 MAX, D15S MAX, D15pro MAX, D16 MAX, D16S MAX, D16pro MAX, D17 MAX, D17S MAX, D17pro MAX, D18 MAX, D18S MAX, D18pro MAX, D19 MAX, D19S MAX, D19pro MAX, D20 MAX, D20S MAX, D20pro MAX, T7S, T8S, D8S, D8S max, S6, S6 Plus, EV3420, EV3430, EV3427, EV3840, EV3640SE, EV3620RL, T10S max, T10S, T12S max, T12S 2.911(d)(5)(i) Equipment Type We, [Dongguan Huicheng intelligent technology Co., LTD] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Amy Tan Date: 2024-08-26 Title and Company name: Safety system engineer /Dongguan Huicheng intelligent technology Co., LTD Dongguan Huicheng intelligent technology Co., LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Dongguan Huicheng intelligent technology Co., LTD 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Dongguan Huicheng intelligent technology Co., LTD Address: Room 101, No. 13, Jinling Road, Jinhe, Zhangmutou Town, Dongguan City, Guangdong Province, China Product Name: Laser sweep and mop integrated robot FCC ID: 2BFFA-L100C0 Model(s): L100C0, L100W0, L100X0, L101X0, D10S, D10S MAX, BL20, DL20, BL40 Max, DL40 Max, T20+, L20+, Q10 Pro, Cleanova W11, Cleanova W11 Lite, Cleanova W11 omni, Cleanova W11 Pro, Cleanova W10, Cleanova W10 Pro, Cleanova W10 max, Cleanova W10 +, Cleanova W10 Elite, D1, D1S, D1pro, D2, D2S, D2pro, D3, D3S, D3pro, D4, D4S, D4pro, D5, D5S, D5pro, D6, D6S, D6pro, D7, D7S, D7pro, D8, D8S, D8pro, D9, D9S, D9pro, D10, D10S, D10pro, D11, D11S, D11pro, D12, D12S, D12pro, D13, D13S, D13pro, D14, D14S, D14pro, D15, D15S, D15pro, D16, D16S, D16pro, D17, D17S, D17pro, D18, D18S, D18pro, D19, D19S, D19pro, D20, D20S, D20pro, D1 MAX, D1S MAX, D1pro MAX, D2 MAX, D2S MAX, D2pro MAX, D3 MAX, D3S MAX, D3pro MAX, D4 MAX, D4S MAX, D4pro MAX, D5 MAX, D5S MAX, D5pro MAX, D6 MAX, D6S MAX, D6pro MAX, D7 MAX, D7S MAX, D7pro MAX, D8 MAX, D8S MAX, D8pro MAX, D9 MAX, D9S MAX, D9pro MAX, D10 MAX, D10S MAX, D10pro MAX, D11 MAX, D11S MAX, D11pro MAX, D12 MAX, D12S MAX, D12pro MAX, D13 MAX, D13S MAX, D13pro MAX, D14 MAX, D14S MAX, D14pro MAX, D15 MAX, D15S MAX, D15pro MAX, D16 MAX, D16S MAX, D16pro MAX, D17 MAX, D17S MAX, D17pro MAX, D18 MAX, D18S MAX, D18pro MAX, D19 MAX, D19S MAX, D19pro MAX, D20 MAX, D20S MAX, D20pro MAX, T7S, T8S, D8S, D8S max, S6, S6 Plus, EV3420, EV3430, EV3427, EV3840, EV3640SE, EV3620RL, T10S max, T10S, T12S max, T12S 2.911(d)(5)(ii) Applicant filing We, [Dongguan Huicheng intelligent technology Co., LTD] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Amy Tan Date: 2024-08-26 Title and Company name: Safety system engineer /Dongguan Huicheng intelligent technology Co., LTD Dongguan Huicheng intelligent technology Co., LTD 2.911 (d)(5)(ii) Applicant Attestation v1.3 NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

- Dongguan Huicheng intelligent technology Co., LTD - Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/26/2024 U.S. Agent Designation [Dongguan Huicheng intelligent technology Co., LTD] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: [2BFFA-L100C0]): Name and company of U.S. agent: AOCE Corporation Inc. Physical U.S. address of agent: 6547 N Academy Bivd #2266，Colorado Springs， CO, 80918 United States FRN of U.S. agent: 0033401381 Email address of U.S. agent: [email protected] [AOCE Corporation Inc.] acknowledges their obligation to accept service of process on behalf of [Dongguan Huicheng intelligent technology Co., LTD]. [Dongguan Huicheng intelligent technology Co., LTD] with the FRN [0035116946] accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature [Name] Amy Tan [Title] Safety system engineer [Company] Dongguan Huicheng intelligent technology Co., LTD S ignature [Name of U.S. agent] Johnson.wang [Title of U.S. agent] Manager [Company of U.S. agent] AOCE Corporation Inc. 48_[mo del] US_Agent_2.911(d)(7) - U, V04

Dongguan Huicheng intelligent technology Co., LTD Agent Authorization Company: Dongguan Huicheng intelligent technology Co., LTD Address: Room 101, No. 13, Jinling Road, Jinhe, Zhangmutou Town, Dongguan City, Guangdong Province, China Product Name: Laser sweep and mop integrated robot Model Number(s): L100C0, L100W0, L100X0, L101X0, D10S, D10S MAX, BL20, DL20, BL40 Max, DL40 Max, T20+, L20+, Q10 Pro, Cleanova W11, Cleanova W11 Lite, Cleanova W11 omni, Cleanova W11 Pro, Cleanova W10, Cleanova W10 Pro, Cleanova W10 max, Cleanova W10 +, Cleanova W10 Elite, D1, D1S, D1pro, D2, D2S, D2pro, D3, D3S, D3pro, D4, D4S, D4pro, D5, D5S, D5pro, D6, D6S, D6pro, D7, D7S, D7pro, D8, D8S, D8pro, D9, D9S, D9pro, D10, D10S, D10pro, D11, D11S, D11pro, D12, D12S, D12pro, D13, D13S, D13pro, D14, D14S, D14pro, D15, D15S, D15pro, D16, D16S, D16pro, D17, D17S, D17pro, D18, D18S, D18pro, D19, D19S, D19pro, D20, D20S, D20pro, D1 MAX, D1S MAX, D1pro MAX, D2 MAX, D2S MAX, D2pro MAX, D3 MAX, D3S MAX, D3pro MAX, D4 MAX, D4S MAX, D4pro MAX, D5 MAX, D5S MAX, D5pro MAX, D6 MAX, D6S MAX, D6pro MAX, D7 MAX, D7S MAX, D7pro MAX, D8 MAX, D8S MAX, D8pro MAX, D9 MAX, D9S MAX, D9pro MAX, D10 MAX, D10S MAX, D10pro MAX, D11 MAX, D11S MAX, D11pro MAX, D12 MAX, D12S MAX, D12pro MAX, D13 MAX, D13S MAX, D13pro MAX, D14 MAX, D14S MAX, D14pro MAX, D15 MAX, D15S MAX, D15pro MAX, D16 MAX, D16S MAX, D16pro MAX, D17 MAX, D17S MAX, D17pro MAX, D18 MAX, D18S MAX, D18pro MAX, D19 MAX, D19S MAX, D19pro MAX, D20 MAX, D20S MAX, D20pro MAX, T7S, T8S, D8S, D8S max, S6, S6 Plus, EV3420, EV3430, EV3427, EV3840, EV3640SE, EV3620RL, T10S max, T10S, T12S max, T12S Product Description: Laser sweep and mop integrated robot We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2024-08-26 Name: Amy Tan Title: Safety system engineer Company: Dongguan Huicheng intelligent technology Co., LTD

Dongguan Huicheng intelligent technology Co., LTD Add: Room 101, No. 13, Jinling Road, Jinhe, Zhangmutou Town, Dongguan City, Guangdong Province, China Tel: 13423772540 Date: 2024-08-26 Dear Sir/Madam, We, Dongguan Huicheng intelligent technology Co., LTD Hereby declares the following statement , PCB board, circuit, structure and internal of these model(s) are the same, Only the model name, exterior color, and accessories are different, does not affect the electrical structure: Product name: Laser sweep and mop integrated robot Models No.: L100C0, L100W0, L100X0, L101X0, D10S, D10S MAX, BL20, DL20, BL40 Max, DL40 Max, T20+, L20+, Q10 Pro, Cleanova W11, Cleanova W11 Lite, Cleanova W11 omni, Cleanova W11 Pro, Cleanova W10, Cleanova W10 Pro, Cleanova W10 max, Cleanova W10 +, Cleanova W10 Elite, D1, D1S, D1pro, D2, D2S, D2pro, D3, D3S, D3pro, D4, D4S, D4pro, D5, D5S, D5pro, D6, D6S, D6pro, D7, D7S, D7pro, D8, D8S, D8pro, D9, D9S, D9pro, D10, D10S, D10pro, D11, D11S, D11pro, D12, D12S, D12pro, D13, D13S, D13pro, D14, D14S, D14pro, D15, D15S, D15pro, D16, D16S, D16pro, D17, D17S, D17pro, D18, D18S, D18pro, D19, D19S, D19pro, D20, D20S, D20pro, D1 MAX, D1S MAX, D1pro MAX, D2 MAX, D2S MAX, D2pro MAX, D3 MAX, D3S MAX, D3pro MAX, D4 MAX, D4S MAX, D4pro MAX, D5 MAX, D5S MAX, D5pro MAX, D6 MAX, D6S MAX, D6pro MAX, D7 MAX, D7S MAX, D7pro MAX, D8 MAX, D8S MAX, D8pro MAX, D9 MAX, D9S MAX, D9pro MAX, D10 MAX, D10S MAX, D10pro MAX, D11 MAX, D11S MAX, D11pro MAX, D12 MAX, D12S MAX, D12pro MAX, D13 MAX, D13S MAX, D13pro MAX, D14 MAX, D14S MAX, D14pro MAX, D15 MAX, D15S MAX, D15pro MAX, D16 MAX, D16S MAX, D16pro MAX, D17 MAX, D17S MAX, D17pro MAX, D18 MAX, D18S MAX, D18pro MAX, D19 MAX, D19S MAX, D19pro MAX, D20 MAX, D20S MAX, D20pro MAX, T7S, T8S, D8S, D8S max, S6, S6 Plus, EV3420, EV3430, EV3427, EV3840, EV3640SE, EV3620RL, T10S max, T10S, T12S max, T12S FCC ID: 2BFFA-L100C0 Sincerely, Client’s name / title : Amy Tan / Safety system engineer Contact information / address: Dongguan Huicheng intelligent technology Co., LTD / Room 101, No. 13, Jinling Road, Jinhe, Zhangmutou Town, Dongguan City, Guangdong Province, China Tel: 13423772540 E-Mail: [email protected]

Dongguan Huicheng intelligent technology Co., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024-08-26 Subject; Request for Confidentiality FCC ID: 2BFFA-L100C0 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Amy Tan Title: Safety system engineer

FCC ID: 2BFFA-L100C0 L100C0 FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 AD-0121900060US FCC ID: 2BFFA-L100C0 GQ12-190060-AU GQ12-190060-AU

Label &label location label location

Label &label location label location

FCC ID: 2BFFA-L100C0 L100C0 FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 ANT FCC ID: 2BFFA-L100C0 FCC ID: 2BFFA-L100C0 ICR18650-26V 4S1P PCM2600 (Primary protection) GH18650-26V 4S1P (Secondary protection) FCC ID: 2BFFA-L100C0 GH18650-26V 4S1P (Primary protection) ICR18650-26V 4S1P PCM2600 (Secondary protection)

RF Exposure evaluation Exposure category: General population/uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device Refer Standard: KDB 447498 D01 General RF Exposure Guidance v06 FCC Part 2 §2.1091 FCC ID: 2BFFA-L100C0 1. Reference According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 6 3.0 – 30 1842/f 4.89/f (900/f 2 )* 6 30 – 300 61.4 0.163 1.0 6 300 – 1500 / / f/300 6 1500 – 100,000 / / 5 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 614 1.63 (100) * 30 3.0 – 30 824/f 2.19/f (180/f 2 )* 30 30 – 300 27.5 0.073 0.2 30 300 – 1500 / / f/1500 30 1500 – 100,000 / / 1.0 30 F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 4. Antenna Information use antennas certificated as follows provided by manufacturer; Internal Identification Antenna Identification in Internal photos Antenna type and antenna number Operate frequency band Maximum antenna gain BT Antenna 0 Internal Antenna 2402MHz-2480MHz 3.62dBi 2.4G Wifi Antenna 0 Internal Antenna 2412MHz~2462MHz 3.62dBi 5. Manufacturing Tolerance BT LE GFSK(Peak) Channel Channel 00 Channel 39 Channel 78 Target (dBm) 0 0 -1.0 Tolerance ±(dB) 1.0 1.0 1.0 2.4G WLAN IEEE 802.11b (Average) Frequency (MHz) 2412 2437 2462 Target (dBm) 17.0 17.0 17.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11g (Average) Frequency (MHz) 2412 2437 2462 Target (dBm) 20.0 20.0 20.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11 n20 (Average) Frequency (MHz) 2412 2437 2462 Target (dBm) 20.0 20.0 20.0 Tolerance ±(dB) 1.0 1.0 1.0 IEEE 802.11n40 (Average) Frequency (MHz) 2422 2437 2452 Target (dBm) 20.0 20.0 20.0 Tolerance ±(dB) 1.0 1.0 1.0 6. Evaluation Results for Standalone 6.1 Standalone MPE As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna refer to antenna information, the RF power density can be obtained. Modulation Type Output power Antenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm2 ) MPE Limits (mW/cm2 ) dBm mW BLE 1.0 1.2589 3.62 2.3014 0.0006 1.0000 2.4GWIFI 21.0 125.8925 3.62 2.3014 0.0576 1.0000 Remark: 1. Output power (Peak) including turn-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer. 7. Simultaneous MPE Result The product's Bluetooth and wifi use the same RF module and the same antenna, there is no need to consider synchronous transmission issues. 8. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device.

▲ ProprietaryConfidential 秘密 文档编号：FM-RD-023A0 <本文中的所有信息均为东莞市汇澄智能科技有限公司信息，务请妥善保管，未经公司明确作出的书面许可，不得为任何目的、以任何形式或手段（包括电子、机械、复印、录音或其它形式）对本文档的任何部 分进行复制、存储、引入检索系统或者传播。. 东莞市汇澄智能科技有限公司 样品承认书 (一式四份或一式六份承认书+样品) 汇澄物料料号:E13-0053-00供方料号:YD-C03-0694 汇澄物料名称:L100W0-WIFI天线供方公司名称:深圳市云顶通讯电子有限公司 版本号：A0 承认项目：□零部件☑半成品□成品□其他 适用于: 承认会签栏 以下栏目内容由汇澄公司相应责任人填写 制定审核品质合议批准 （可印研发或品质部印章） 以下栏目内容由供应方样品制作单位及相应责任人填写 制定审核品质合议批准 （可印研发部或品质部或合同专用印章） 本封面承认书制作说明与注意事项： 1、客户指定的物料，需要送客户承认签样，制订时须做一式六份的承认书+样品送签核；如果是汇澄开发的物料，承认时 送一式四份的承认书+样品；如是客户客供的物料也是交客户参考此格式做一式四份的承认书+样品。 2、版本号：由A0开始发行，第1次承认发行是A0,第2次承认发行则是A1,第3次承认发行是A2,如此类推下去。发行A1 需把A0承认书回收报废处理。此版本号与物料变更多少次无关。只按发行的版本顺序排下去处理。 3、如遇样品有物殊要求或説明，则请在适用于栏目上填写要求，双方各持内容要达到一致。 4、本承认书涉及双方盖章的部份：可盖研发或品质文控或合同专用章；另外供方制订时注意承认书每页均要盖章（如果页 数过多的部份，可以盖骑缝章）；盖章用红色或蓝色印油，务必确保盖章后清晰且易识辨规格内容。 5、确认发行的样品签字确认要求：客签样实物上要有客户项目或工程或品质确认签名；汇澄确认的样品要有对应责任工程 师的确认签名。样品上签字要找合适的位置，签字以不影响样品外观和性能为合适。面积过小的样品可以用打点区分或不作区分。 汇澄 盖章 供方盖章 ▲ ProprietaryConfidential 秘密 文档编号：FM-RD-023A0 <本文中的所有信息均为东莞市汇澄智能科技有限公司信息，务请妥善保管，未经公司明确作出的书面许可，不得为任何目的、以任何形式或手段（包括电子、机械、复印、录音或其它形式）对本文档的任何部 分进行复制、存储、引入检索系统或者传播。. 承认书内容 1、产品规格书---（承认物料产品涉及的相应结构/电性方面详细规格书） 2、产品结构尺寸图纸规格---(图面清晰，内容无缺漏、错误) 3、产品可靠性测试要求或标准---（承认物料产品涉及本产品可靠度的相关要求） 4、产品工艺工程图/QC管制图---（附本物料或产品的生产管控图) 5、外观及产品尺寸检测报告---（按要求如实进行样品的出货检验报告） 6、功能、性能检测报告---（按要求如实进行样品的出货检验报告，确认检验项目符合该材料的行内标准） 7、可靠性检测报告---（按要求如实进行样品的出货检验报告，确认检验项目符合该材料的行内标准） 8、材质证明---（物件的组成部件清单/材质名称、成份表/并保证批货与其之一致性) 9、ROSH/MSDS/REACH报告（含卤素测试）---(该样品所使用到的材质，相对应的ROHS及其它环保报告;报告 须在有限其限内（一年有效）;内容过多过大可以用电子档形式，刻成光盘附带形式） 10、禁用物料成分对照表---（按表格确认和罗列禁用物质成份的部份) 11、包装规范---(批量出货时的包装方式，要注意考虑评估好产品特性和外观方面的保护) 12、实物样品---(和量产一致的实物样品供项目或工程师签样用) 备注说明： 1.同一个物料型号，同一种材质且组成该物料的生产供应商为同一个时，只需送一次样品承认书（如IC签一次原厂样，不同 代理只需送测确认），；如组成该产品的材质、二级供应商有变更及汇澄或供应商提出变更时，必须再次送样品承认书； 2.线路板（FPC、PCB）样品承认书内容规定如下： 线路板承认书内容包括图纸、尺寸检测报告、外观检验报告、功能或性能测试报告等相关可靠性测试报告及有害物质调查表、 材质环保报告、材质MSDS报告、REACH调查表；FPC还需有弯拆测试报告、剥离测试报告； 3.泡棉、覆盖膜样品承认书内容规定如下： 承认书内容可包括图纸、尺寸检测报告、外观检验报告、回弹力测试、有害物质调查表、均一材质环保报告、均一材质MSDS 报告、REACH调查表； 4.带端子的线材样品承认书内容规定如下： 承认书内容可包括图纸、尺寸检测报告、外观检验报告、弯拆测试报告、拉力测试报告、导通测试报告、阻抗测试报告、盐 雾测试报告、插拔力测试报告等相关可靠性测试报告及有害物质调查表、均一材质环保报告、均一材质MSDS报告（端子及线 芯的金属材料提供材质证明）、REACH调查表；单线材则不用提供盐测试报告和拉力测试报告，其它报告同带端子的线材一样； 5.螺丝、螺母样品承认书内容规定如下： 承认书内容包括图纸、尺寸检测报告、外观检验报告、盐雾测试报告等相关可靠性测试报告及有害物质调查表、均一材质环 保报告、均一材质材质证明、表面处理层的MSDS报告、REACH调查表； 6.电子元件样品承认书内容规定如下： 承认书内容含产品图纸、电气原理图、尺寸检测报告、外观检验报告、功能或性能测试报告等相关可靠性测试报告及有害物 质调查表、均一材质环保报告、均一材质MSDS报告、REACH调查表； 7.电镀产品样品承认书内容规定如下： 承认书内容包括外观检查报告、盐雾测试报告、弯拆测试报告、膜厚测试报告、可焊性测试报告等相关可靠性测试报告及有 害物质调查表、均一材质环保报告、均一材质MSDS报告、REACH调查表； 8.五金料样品承认书内容规定如下： 承认书内容包括图纸、尺寸检测报告、外观检验报告、盐雾测试报告、硬度测试报告等相关可靠性测试报告及有害物质调查 表、均一材质环保报告、均一材质材质证明、表面处理层的MSDS报告、REACH调查表； 9.塑胶件样品承认书内容规定如下： 承认书内容包括2D图纸、尺寸检测报告、外观检验报告、材质证明、表面处理层的MSDS报告、REACH调查表； 10.样品按以下要求提供： （a）.泡棉、覆盖膜、FPC、PCB每份承认书内的样品数量不少于5模次； （b）.螺丝、螺母、端子、电子原件每份承认书内的样品数量不少于10pcs； （c）.线材每份承认书内附样品不少于5pcs； （d）.电镀产品每份承认书内附样品不少于15pcs； （e）.五金料每份承认书内附样品不少于20pcs； （f）.塑胶件每份承认书内附样品1pcs-2pcs(视胶件大小来定)； （g）.当汇澄有特殊要求时按要求提供样品数量。 ▲ ProprietaryConfidential 秘密 文档编号：FM-RD-023A0 <本文中的所有信息均为东莞市汇澄智能科技有限公司信息，务请妥善保管，未经公司明确作出的书面许可，不得为任何目的、以任何形式或手段（包括电子、机械、复印、录音或其它形式）对本文档的任何部 分进行复制、存储、引入检索系统或者传播。. 修改覆历表 版本号修改日期修改描述特别说明 A02024.6.4首次发行 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 4 深圳市云顶通讯电子有限公司 SHENZHEN 1. 产品规格书 1.1.天线效率与增益 Frequency/MhzEfficiency/%MaxGain/dBi 240041.883.07 241044.163.05 242044.873.25 243046.133.43 244046.883.39 245047.973.47 246048.193.53 2470503.62 2480503.52 249049.773.26 250049.093.33 1.2.天线增益3D图 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 5 深圳市云顶通讯电子有限公司 SHENZHEN 2. 产品结构尺寸图纸规格 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 6 深圳市云顶通讯电子有限公司 SHENZHEN 3. 产品可靠性测试要求或标准 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 7 深圳市云顶通讯电子有限公司 SHENZHEN 4. 产品工艺工程图 /QC 管制图 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 8 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 9 深圳市云顶通讯电子有限公司 SHENZHEN 5. 外观及产品尺寸检测报告 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 10 深圳市云顶通讯电子有限公司 SHENZHEN 6. 功能、性能检测报告 6.1.天线性能SWR 频率2.42.452.5 VSWR1.881.901.59 6.2. 天线 OTA 测试数据发射功率 TRP/ 接收灵敏度 TIS ItemMeasurementBandChannelFrequencyTotal 1TRPWIFI_B(11M)1241212.34 2TIS(EIRP)WIFI_B(11M)12412-86.22 3TRPWIFI_B(11M)6243712.61 4TIS(EIRP)WIFI_B(11M)62437-85.76 5TRPWIFI_B(11M)11246212.54 6TIS(EIRP)WIFI_B(11M)112462-86.18 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 11 深圳市云顶通讯电子有限公司 SHENZHEN 电器技术参数 电性能指标 ElectricalSpecifications 频率范围2400~2500MHzFrequencyRange2400~2500MHz 电压驻波比≤2.0VSWR≤2.0 输入阻抗50ΩInputImpedance50Ω 增益3DBIGain3DBI 机械指标 MechanicalSpecifications 线材颜色黑色WirecolorBlack 接口形式IPEX一代InputconnectorIPEX1 天线线长200mmCablelength200mm 工作温度-40°C~+85°CWorkingTemperature-40°C~+85°C 工作湿度20~80%WorkingHumidity20~80% TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN 7. 可靠性检测报告 拉力测试报告 1. 将天线端子线两头分别水平放置在拉力测试仪上； 2. 连续 3 次将仪器拉力拉至 1.5kg~2.0kg 范围内，天线两头无脱落、松动； 3. 测试完成后天线电性能正常； TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN 8. 材质证明 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN 9.ROSH/MSDS/REACH 报告 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN 10. 禁用物料成分对照表 TEL：+860755-23073599FAX：+860755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN 11. 包装规范 说明： 1.包装要有客户名称，项目名称，型号 2.包装方式，内外标贴要有大…

Text truncated - open the document above for the full version.

FCCPart15CTESTREPORT FCCID:2BFFA-L100C0 Product:Lasersweepandmopintegratedrobot ModelName:L100C0,L100W0 Brand:N/A ReportNo.:NCT24029456 Preparedfor DongguanHuichengintelligenttechnologyCo.,LTD Room101,No.13,JinlingRoad,Jinhe,ZhangmutouTown,DongguanCity,Guangdong Province,China Preparedby ShenzhenNCTTestingTechnologyCo.,Ltd. A101&2FB2,Fuqiao6thArea,XintianCommunity,FuhaiStreet,BaoanDistrict, Shenzhen,People’sRepublicofChina TEL:400-8868-419 FAX:86-755-27790922 ReportNo.:NCT24029456 Page2of67 Hotline:400-8868-419Fax:86-755-27790922 http://www.ncttesting.cn 1TESTRESULTCERTIFICATION Applicant’sname:DongguanHuichengintelligenttechnologyCo.,LTD Address: Room101,No.13,JinlingRoad,Jinhe,ZhangmutouTown,DongguanCity, GuangdongProvince,China Manufacture's name :DongguanHuichengintelligenttechnologyCo.,LTD Address: Room101,No.13,JinlingRoad,Jinhe,ZhangmutouTown,DongguanCity, GuangdongProvince,China Productname:Lasersweepandmopintegratedrobot Modelname:L100C0,L100W0 Standards: FCCCFR47Part15Section15.247 RSS-247Issue3,February2017 RSS-GENIssue5April2018Amendment2(February2021) Testprocedure:ANSIC63.10:2013 Dateoftest:Jun.26,2024toSep.05,2024 DateofIssue:Sep.06,2024 ThisdevicedescribedabovehasbeentestedbyNCT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofNCT,thisdocumentmaybe alteredorrevisedbyNCT,personalonly,andshallbenotedintherevisionofthedocument. TestEngineer: HughZhang /Engineer TechnicalManager: HenryWang/Manager ReportNo.:NCT24029456 Page3of67 Hotline:400-8868-419Fax:86-755-27790922 http://www.ncttesting.cn Contents Page 1TESTRESULTCERTIFICATION...............................................................................................................................2 2TESTSUMMARY..........................................................................................................................................................5 3GENERALINFORMATION..........................................................................................................................................6 3.1GENERALDESCRIPTIONOFE.U.T.....................................................................................................................6 3.2CHANNELLIST.....................................................................................................................................................8 3.3TESTSITE............................................................................................................................................................9 3.4TESTSETUPCONFIGURATION............................................................................................................................9 3.5TESTMODE.......................................................................................................................................................10 4EQUIPMENTDURINGTEST....................................................................................................................................11 4.1EQUIPMENTSLIST.............................................................................................................................................11 4.2MEASUREMENTUNCERTAINTY.........................................................................................................................13 4.3DESCRIPTIONOFSUPPORTUNITS...................................................................................................................13 5CONDUCTEDEMISSION..........................................................................................................................................14 5.1E.U.T.OPERATION............................................................................................................................................14 5.2EUTSETUP.......................................................................................................................................................14 5.3TESTSET-UP(BLOCKDIAGRAMOFCONFIGURATION).................................................................................15 5.4MEASUREMENTPROCEDURE............................................................................................................................15 5.5CONDUCTEDEMISSIONLIMIT...........................................................................................................................15 5.6MEASUREMENTDESCRIPTION..........................................................................................................................15 5.7CONDUCTEDEMISSIONTESTRESULT.............................................................................................................15 6RADIATEDSPURIOUSEMISSIONS......................................................................................................................20 6.1EUTOPERATION...............................................................................................................................................20 6.2TESTSETUP......................................................................................................................................................21 6.3SPECTRUMANALYZERSETUP..........................................................................................................................22 6.4TESTPROCEDURE.............................................................................................................................................23 6.5SUMMARYOFTESTRES…

Text truncated - open the document above for the full version.