2BFPQ-TVU-A10Smart RTLS Tag, TVU-A10 (HAE-ST-UWB-V-X-001)

User Manual TEIA Co., Ltd. SuiteB-303/304, 33 Gwacheon-daero7-gil Gwacheon-si, Gyeonggi-do, RepublicofKorea Tel.02.6390.6223/Fax.02.6390.6224 E-Mail: [email protected] Smart RTLS Tag TVU-A10 (HAE-ST-UWB-V-X-001) 1. Introduction - Product name: Smart RTLS Tag - Model: TVU-A10 (HAE-ST-UWB-V-X-001) - This device is designed to be attached to the object for tracking its location in indoor environment - The product broadcasts Ultra Wide-band signal and infrastructure calculates the signal to determine its 0D(presence detection), 1D, 2D coordinates. Figure1 Product picture 2. Technical Specification - Size: 99 x 63 x 27 mm - Weight: 160g - Features: Radio broadcasting for indoor location - Power Supply: Internal Li-Pol 3,000mAhbattery (Wireless charge) - Radio: UWB 6.5GHz - Housing: Engineering plastic (PC-ABS) (IP66) - Environment: Industrial / Warehouse - Operatingconditions: -20 ~ 60°C, 20~85% Humidity without condensation 3. Parts Names and Features Figure 2 Parts names - Charge LED: Charge status: Charging – RED on / Charge complete – OFF - User LED: Tag status: Working – GREEN blink / Low battery – ORANGE or RED blink - Sealing rubber: Waterproof, dustproof - Magnet attachment site: Attachment to metal objects Charge LED User LED Sealingrubber Magner attachment site 4. How to Use - Attach to the desired tracking object’s surface (Magnetattachment) - Check UserLED is GREEN Blink, charge the battery if not 5. Battery Charge - Place the device on wireless charger - Check RED LED is on. - RED LED turns off when charging is completed. 6. Safety and Regulatory Information - Pleaseusethedeviceinindoorenvironmentonly. - Do not use the device in wet conditions. - Throwing or dropping the device above a certain height (2 meters) may cause damage. - If the device is wet, please remove the moisture with dry cloth. - When the device is not working properly, do not disassemble the product and contact the manufacturer. Warning Statement. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device. This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance. “This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties.”

Certification designating a U.S. Agent for service of process: As required by section 2.911(d)(7), the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. In either scenario, the designation of the U.S. agent for service of process should be provided as an attachment to the equipment authorization application. The applicant must provide a written certification, which must: i. Be signed by both the applicant and designated agent for service of process, if the agent is different from the applicant. ii. Acknowledge the applicant’s consent and the designated agent’s obligation to accept service of process. iii. Provide a physical U.S. address and email for the designated agent. iv. Acknowledge the applicant’s acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Unofficial information provided by FCC personnel on February 14, 2023, via the monthly call with the TCB Council: The Agent for Process of Service: • cannot be a TCB or affiliated with a TCB (e.g. could not be a person who works for a TCB or a company that owns or is owned by the TCB) • cannot be a [FCC recognised] Lab or affiliated with a test lab (e.g. could not be a person who works for a Lab or a company that owns or is owned by the Lab) • Agent can be Individual Entity or a Company Entity • Agent Entity must be located in US, US address/phone • Entity acting as Agent must have FRN (best practice, put FRN on Agent Letter) • Agent letter does not have to be FCC ID specific, can be general Agent for Grantee For devices being marketed or for which marketing has ceased for less than 1 year, if the Agent for Process of Service changes, then for every TC Number the TCB must request the FCC to put application into Audit Mode and Agent Letter needs to be updated (superseded). NOTE: The U.S. Agent for Service of Process should not be confused with the authorized agent used for signing the 731 form, other cover letters within the application, and/or the agent who may interface with the TCB. U.S. Agent Designation for Service of Process ATTENTION: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA REGARDING: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Approve-IT, Inc. Contact Name: Nathan Grinager Street Address: 8011 34 th Ave South, Suite 342 City/Province/Zip: Bloomington, MN 55425 Telephone No: 651-247-1678 Email: [email protected] FRN #: 0027533835 This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: May 27, 2024 Signed by (Printed Name/Title): Nathan Grinager / Co-President *This letter is valid indefinitely for all applications submitted within the period of 05/27/2024 – 05/26/2025 The Applicant confirms its explicit consent and acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Hyundai Autoever Corp. Grantee FRN: 0035236199 Grantee Code: 2BFPQ Contact Name: Yun Su Shim Street Address: 510 Teheran-ro City/Province/Zip: Gangnam-gu, Seoul, South Korea, 06179 Telephone No: +82-10-9636-1981 Email: [email protected] Applicant Signature: Date: May 24, 2024 Signed by (Printed Name/Title): Yun Su Shim, Professional

Date: May 31, 2024 Certification Attestation Statements Attn: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA To Whom It May Concern: FCC ID : 2BFPQ-TVU-A10 47 CFR section 2.911(d)(5)(i) Attestation Statement Hyundai Autoever Corp. certifies that as of the date of the application the equipment for which authorization is sought is not “covered” equipment1 prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, including affiliates or subsidiaries of the named companies, the applicant must include an explanation on why the equipment is not “covered” equipment. Additional Explanation: - 47 CFR section 2.911(d)(5)(ii) Attestation Statement Hyundai Autoever Corp. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant ☐ - is / ☐ - is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Thank you, Signature Name: Yun Su Shim Title: Professional Company: Hyundai Autoever Corp. Tel # : +82-10-9636-1981 1 - The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist . 2 - Letters should be placed on appropriate letterhead.

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date : April 29, 2024 SUBJECT: FCC Application for (FCC ID : 2BFPQ-TVU-A10) To Whom It May Concern: We, the undersigned, hereby authorize Young-taek, Lee at CTK on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by CTK on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, NAME: Yun Su Shim Applicant: Hyundai Autoever Corp.

Rev 11/20/07 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID : 2BFPQ-TVU-A10 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Block diagram Schematics Schematics_PCB Layout Parts list Operational description Block Diagram.pdf Schematics.pdf Schematics_PCB Layout.pdf Part List.pdf Operational Description.pdf The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, NAME: Yun Su Shim Applicant: Hyundai Autoever Corp.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com EUT External Photographs CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com

TVU-A10Label & Label Location FCC ID : 2BFPQ-TVU-A10 TEIA CO., LTD. Country of Origin : KR

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com EUT Internal Photographs CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Wireless power charging (Only receive)

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Page 1 of 2 RF EXPOSURE EVALUATION FCC ID : 2BFPQ-TVU-A10 Standard Requirement -The following FCC Rule Parts and procedures are applicable : Part 1.1310 Radiofrequency radiation exposure limits Part 2.1091 Radiofrequency radiation exposure evaluation : Mobile device KDB447498 D01 v06 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies Table 1 below sets forth limits for Maximum Permissible Exposure (MPE) to radiofrequency electromagnetic fields. Table 1—Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 f = frequency in MHz * = Plane-wave equivalent power density CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Page 2 of 2 MPE calculation S = EIRP / (4πR 2 ) Where S : Power density EIRP : P x G P : Maximum transmitter power G : Antenna gain R : distance to the centre of radiation of the antenna RF Exposure EIRP : -46.1 dBm/MHz R : 20 cm S = (2.45 * 10 -5 ) mW/cm 2 Conclusion This confirms compliance to the required Radio frequency radiation exposure limit.

2 TagModule1 Antenna -Ultra-wideband -Omni-directional -Planar antenna -Maximum Gain 6.5 GHz ~ 2.5 dBi -Can be integrated into existing PCB

TEST REPORT CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-01255 Page (1) / (23) Pages [QF-QP15-07] Ver.01 R108 1. Applicant ◦ Name : Hyundai Autoever Corp. ◦ Address : 510 Teheran-ro, Gangnam-gu, Seoul, Republic of Korea ◦ Date of Receipt : 2024-03-11 2. Manufacturer ◦ Name : TEIA Co.,Ltd ◦ Address : Suite B-303/304, 33 Gwacheon-daero 7-gil, Gwacheon-si, Gyeonggi-do, Republic of Korea 3. Use of Report : For FCC Certification 4. Test Sample / Model : Smart RTLS Tag / TVU-A10 (HAE-ST-UWB-V-X-001) 5. Date of Test : 2024-03-18 to 2024-03-25 6. Test Standard(method) used : FCC 47 CFR part 15 subpart C 15.517 7. Testing Environment: refer to 7 page 8. Test Results : Compliance 9. Location of Test : Permanent Testing Lab On Site Testing (Address : 5, Dongbu-ro 221beon-gil, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea) The results shown in this test report refer only to the sample(s) tested unless otherwise stated. This report cannot be reproduced or copied without the written consent of CTK. Approval Tested by Bong-seok Kim: (Signature) Technical Manager Young-taek Lee: (Signature) Remark. This report is not related to KOLAS accreditation and relevant regulation. 2024-04-26 CTK Co., Ltd. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-01255 Page (2) / (23) Pages [QF-QP15-07] Ver.01 R108 REPORT REVISION HISTORY Date Revision Page No 2024-04-26 Issued (CTK-2024-01255) all This report shall not be reproduced except in full, without the written approval of CTK Co., Ltd. This document may be altered or revised by CTK Co., Ltd. Personnel only, and shall be noted in the revision section of the document. Any alteration of this document not carried out by CTK Co., Ltd. Will constitute fraud and shall nullify the document. CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-01255 Page (3) / (23) Pages [QF-QP15-07] Ver.01 R108 CONTENTS 1. General Description .................................................................................................... 4 1.1 Client Information .............................................................................................. 4 1.2 Product Information ............................................................................................ 4 1.3 Antenna Information ........................................................................................... 4 2. Accreditations ........................................................................................................... 5 2.1 Laboratory Accreditations and Listings .................................................................. 5 2.2 Calibration Details of Equipment Used for Measurement .......................................... 5 3. Test Specifications ..................................................................................................... 6 3.1 Standards.......................................................................................................... 6 3.2 Mode of operation during the test ......................................................................... 6 3.3 Peripheral Devices .............................................................................................. 7 3.4 Measurement Uncertainty .................................................................................... 7 3.5 Test Software ..................................................................................................... 7 3.6 Testing Environment ........................................................................................... 7 4. Technical Characteristic Test ........................................................................................ 8 4.1 Emission Bandwidth ............................................................................................ 8 4.2 Radiated emission ............................................................................................ 10 APPENDIX A – Test Equipment Used For Tests ................................................................. 23 CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-01255 Page (4) / (23) Pages [QF-QP15-07] Ver.01 R108 1. General Description 1.1 Client Information Company Hyundai Autoever Corp. Contact Point 510 Teheran-ro, Gangnam-gu, Seoul, Republic of Korea Contact Person Name : Yun Su Shim E-mail : [email protected] 1.2 Product Information FCC ID 2BFPQ-TVU-A10 Product Description Smart RTLS Tag Model name TVU-A10 (HAE-ST-UWB-V-X-001) Variant Model name - Charging Frequency 6 489.6 MHz Antenna Type PCB Pattern Power Source DC 3.7 V 1.3 Antenna Information Integral antenna (antenna permanently attached) Temporary RF connector provided No temporary RF connector provided. Transmit chains bypass antenna and soldered temporary RF connector provided for connected measurement. In case of conducted measurements the transmitter shall be connected to the measuring equipment via a suitable attenuator and correct for all losses in the RF path. External antenna (dedicated antennas) CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 Report No.: CTK-2024-01255 Page (5) / (23) Pages [QF-QP15-07] Ver.01 R108 2. Accreditations 2.1 Laboratory Accreditations and Listings Country Agency Registration Number USA FCC 805871 CANADA ISED CN : 8737A CAB ID : KR0025 KOREA NRRA KR0025 2.2 Calibration Details of Equipment Used for Measurement Test equipment and test accessories are calibrated on regular basis. The maximum time between calibrations is one year or what is recommended by the manufacturer, whichever is less. All test equipment calibrations are traceable to t…

Text truncated - open the document above for the full version.

CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com Test Setup Photographs and Configuration Radiated emissions [9 kHz ~ 30 MHz] [30 MHz ~ 1 GHz] CTK Co., Ltd. (Ho-dong), 113, Yejik-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, Korea Tel: +82-31-339-9970 Fax: +82-31-624-9501 www.e-ctk.com [1 GHz ~ 18 GHz] [18 GHz ~ 40 GHz]