2BFXT-MC250Stereo Amplifier

AES/EBU INPUT RLRLRL PRE OUT XLR INPUT 2XLR INPUT 1 MyConnect 250 P/N: 6325 501C 0700 6325 501C 0700 2021.10.19 2022.01.11 2024.04.16 2022.03.04 根据机械图更改 2022.05.11 增加Stereo Amplifier名称 2024.03.06 增加FCC ID NO 2024.04.16 修改FCC ID NO

MPEEvaluation Applicant:AdvanceParis FCCID: 2BFXT-MC250 Model: MyConnect250 MPEEvaluation RFExposureComplianceRequirement StandardRequirement AccordingtoKDB447498D01GeneralRFExposureGuidancev06andFCC1.1310Radio frequencyradiationexposurelimitsforGeneralPopulation/UncontrolledExposure EUTRFExposure Pd=PG/4πR 2 Pd=powerdensityinmW/cm2 P=outputpowertoantennainmW G=gainofantennainlinearscale π=3.14 R=distancebetweenobservationpointandcenteroftheradiatorincm WIFI: TheMaxOutputPoweris20.55dBmin802.11gmode2.462GHz; Antennagain:2.5dBi,gainofantennainlinearscale:1.78 R=20cm Pd=PG/(4πR 2 )=0.04mW/cm2<1(limits)mW/cm 2 --END--

ITL Page 1 of 73 Report No.: D240227003 TEST REPORT Applicant: Advance Paris Address of Applicant: 13 rue du Coq Gaulois - 77257 Brie comte Robert Cedex, France Manufacturer: Jiang Men KeYi Electronic Ltd. Address of Manufacturer: 180 West High & New Technology Road, JiangHai Region, JiangMen, Guangdong Province, P.R.China Product name: Stereo Amplifier Model(s): MyConnect 250 Rating(s): 115/230 V~ 50/60 Hz 600W Trademark: ADVANCE PARIS Standards: 47 CFR PART 15 Subpart C section 15.247 FCC ID: 2BFXT-MC250 Data of Receipt: 2024-01-31 Date of Test: 2024-01-31-2024-03-13 Date of Issue: 2024-03-13 Test Result Pass* * In the configuration tested, the test item complied with the standards specified above. Authorized for issue by: Test by: Reviewed by: Mar.13, 2024 Chivas Tsang Mar.13, 2024 Victor Meng Project Engineer Project Manager Date Name/Position Signature Date Name/Position Signature ITL Page 2 of 73 Report No.: D240227003 Testing Laboratory information: Testing Laboratory Name ........... : ITL Co., Ltd Address : No. 8 Jinqianling Street 5, Huangjiang Town, Dongguan, Guangdong, 523757 P.R.C. Testing location : Same as above Tel : 0086-769-39001678 Fax : 0086-20-62824387 E-mail : [email protected] Possible test case verdicts: - test case does not apply to the test object .. : N/A - test object does meet the requirement ........ : P (Pass) - test object does not meet the requirement .. : F (Fail) General remarks: The test results presented in this report relate only to the object tested. The results contained in this report reflect the results for this particular model and serial number. It is the responsibility of the manufacturer to ensure that all production models meet the intent of the requirements detailed within this report. This report would be invalid test report without all the signatures of testing technician and approver. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. General product information: / ITL Page 3 of 73 Report No.: D240227003 1 Test Summary Test Test Requirement Test method Result Antenna Requirement FCC PART 15 C section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (c) and Section 15.203 PASS Occupied Bandwidth FCC PART 15 C section 15.247 (a)(2) ANSI C63.10:2013 PASS Maximum Peak Output Power FCC PART 15 C section 15.247(b)(3) ANSI C63.10: 2013 PASS Peak Power Spectral Density FCC PART 15 C section 15.247(e) ANSI C63.10:2013 PASS Conducted Spurious Emission (30 MHz to 25GHz) FCC PART 15 C section 15.209 &15.247(d) ANSI C63.10:2013 PASS Radiated Spurious Emission (30 MHz to 25 GHz) FCC PART 15 C section 15.209 &15.247(d) ANSI C63.10:2013 PASS Band Edges Measurement FCC PART 15 C section 15.209 &15.247(d) ANSI C63.10:2013 PASS Conducted Emissions at Mains Terminals FCC PART 15 C section 15.207 ANSI C63.10:2013 PASS Radiated Emissions which fall in the restricted bands FCC PART 15 C section 15.209 ANSI C63.10:2013 PASS ITL Page 4 of 73 Report No.: D240227003 2 Contents Page TEST REPORT ................................................................................................................................................................. 1 1 TEST SUMMARY .................................................................................................................................................... 3 2 CONTENTS .............................................................................................................................................................. 4 3 GENERAL INFORMATION .................................................................................................................................... 5 3.1 CLIENT INFORMATION ....................................................................................................................................... 5 3.2 GENERAL DESCRIPTION OF E.U.T. ................................................................................................................... 5 3.3 DETAILS OF E.U.T. ........................................................................................................................................... 5 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................................................................... 5 3.5 TEST LOCATION ................................................................................................................................................ 5 3.6 TEST FACILITY .................................................................................................................................................. 6 3.7 MEASUREMENT UNCERTAINTY ......................................................................................................................... 6 4 INSTRUMENTS USED DURING TEST ................................................................................................................ 7 5 TEST RESULTS ...................................................................................................................................................... 8 5.1 E.U.T TEST CONDITIONS ................................................................................................................................... 8 5.2 ANTENNA REQUIREMENT .................................................................................................................................10 5.3 OCCUPIED BANDWIDTH ...................................................................................................................................11 5.4 MAXIMUM PEAK OUTPUT POWER ....................................................................................................................23 5.5 PEAK POWER SPECTRAL DENSITY ..................................................................................................................31 5.6 CONDUCTED SPURIOUS EMISSIONS................................................................…

Text truncated - open the document above for the full version.

2 Catalog 1.Homepage...........................................................................1 2.Catalog................................................................................2 3.Productmap........................................................................3 4.Productphoto......................................................................4 5.Maintechnicalparameters..................................................5 6.Testreport........................................................................6-8 7.Mechanicaltestingrequirements........................................9 8.Packingcriterion...............................................................10 3 Productmap 4 Productphoto 5 Maintechnicalparameters 型号 TLB-2400-JWY-IPEX-12 5mm Model TLB-2400-JWY-IPEX-1 25mm 主要技术指标MainTechnicalSpecifications 射频参数/Radiofrequencyparameters 频率范围（MHz）2400-2500FrequencyRange（MHz）2400-2500 频带宽度 （ MHz）100Bandwidth（MHz）100 电压驻波比≤2.0VSWR≤2.5 增益（dBi）2.0±0.5 Gain（dBi） 2.0±0.5 最大功率（W）1-3MaxInputpower（W）1-3 输入阻抗（Ω）50InputImpedance（Ω）50 极化形式垂直极化PolarizationVertical 机械参数/MechanicalData 电缆长度（mm）125±2Length（mm）125±2 接口形式IPEXConnectorTypeIPEX 环境参数/Environmentalparameters 工作温度-40~80C°Operationtemperature-40~80C° 储藏温度-40~85C°Storetemperature-40~85C° 6 Testreport（1） VSWR Parametermeasurementdata: Samplefrequency 2400M Hz 2450M Hz 2500M Hz VSWR1.341.011.27 7 Testreport（2） ReturnLoss Parametermeasurementdata : Sample frequency 2400MHz2450MHz2500MHz ReturnLoss-17.26-34.97-18.24 8 Testreport（3） Antennatestingequipment Measurementofantennaparameters： 1>Instrument：Networkanalyzer 2>Calibration：Thecalibrationofthedeviceiscorrectedbyoneport oftheOSLcalibrationkit. 3>Measure：Connecttheantennatobemeasuredtothenetworkanalysis S11. Networkanalyzer： Antennameasurementnetworkanalyzer 9 Mechanicaltestingrequirements No.TestprojectTestmethodsandconditionsTestequipmentTestresult 1 Vibrationtest TestconditionA:thepurposeof thistestprocedureistodetail thestandardtestmethod. Theproductsusedareevaluated bymovementormoving,affecting theperformanceofmaterials. Vibrationtesting machine Qualified Requirement: Vibrationrange:10-55HZ Displacementamplitude:0.35mm Accelerationamplitude:50.0M/S Frequencyofsweepcycle:30times 2 DropTest Referencetestspecification: Thesampleshouldbeplacedata certainheightwithaheightof 1Mand3dropsinthedirection of6faces FalltesttoolQualified Requirement: Afterfallingtest,the mechanicalpropertiesofthe productarenormal 10 PACKINGCRITERION Productnumber：xxxxxxx Productname/specification：TQC-2400-1.8DXBNC 1.Labelrequirements： 2.Encasementrequirements： 1)Internalpacking：XxxPCSabag，PutintothebigPEbag； 2)Outerpacking：XxxPCSabox Mattersneedingattention： 1.Whetherthepartitionboardandthepearlcottonshouldbeadded; 2.Tagsareattached,suchasROHS,etc. Buyer： Supplier： Purchasesinglenumber： Productnumber: Productname: Number:XxxPCSDateofproduction:Xxxday