2BFXV-KT79Smart Watch

USE MANUAL Smart Watch Charging and Activation Before using the watch forthe first time, please ensure it is fully charged. If the charging icon does not appear, please keep charging for 1 O minutes 1 Usethe inc|uded ma吊neticcharging cabfeto attach ittothe metaI contactpoints on the backofthewatch,t en charge it. 2. This product does not come with a power adapter. To ensure safety, you can use a computer USB interl'ace or a power adapter with an output not exceeding SV"'1A when chargin 芍 Pleasepurchasea poweradapterthrough Iegitimate channeIsand avoid using low-quality or counte什eitadapters to prevent damage to the watch, explosions, or fires 3 Do notchar 斤 e in a humid environment. ReguIar|ycIean thewatch bodywith a drycIoth to ensure the cleaoliness of the magnetic charging port and the magnetic charging cable for normal charging Buttons and Touch 1.Long press button G) to turn on / off the watch,s hort press to turn on the screen 2.0n the watch dial inte什ace,click button G) to enter the menu, and press the button twice in quick succession to switch the menu styles 3. Long press button� to enter the sports list,short press to turn off the screen 4.When on the othe, inte计aces,press the button to ceturn Swipe Up: Message Notifications : w p 吵一， ： wp: Rg; Swipe Down: Control Center App Download and Connection 霆 1. Download and install the 'Da Fit'app You can scan the QR code in this manual, scan the QR code on the watch, or directly search for 'Darn• in the app store to download 2. Connect the smartwatch. After turning on Wireless on your phone, enter the app (note: if you cannot open the app, please enable location services on your phone, then open the app) and click 'Device'->'Add Device'-> Bind the corresponding device that appears in the search (look for the relevant item in 'Settings'->'About'to find the Wireless name and MAC address of t he device on the watch)-> Click'Connect.' 3. Connect WirelessCalling/Audio Wireless. In the initial state of t he watch, Wireless calling is turned off by default, so calling and music functions are unavailable. Slide down to the 'Control Center'on the watch face, enter the 'Settings'menu, click the 'Calling'icon, and turn on calling and audio Wireless to enable these functions Features 一On the main screen, press and hold for 2 seconds to enterthe watch face Oial :;;:;; switching interface, swipe left and rightto switch watch faces, and clickto swl, ch confirm. You can push'Custom'watch faces through the app. '() Displays the steps, distance, and calories recorded for the day. You can set spon, data step, distance, and calorie goals in the app. 包DispIaysthe sIeep monitoring status forthe day,with data updated daiIy When connected to the app, data can be synchroni,ed and the device will " " ' recalculate new data forthe day. Enterthe heart rate measurement interface, click to startthe test after 芍enteringthepage,andthe bottomtestIightwi|| |ightup to begin measurement. It takes about60 seconds, and when it's done, there will be a Heart ca«· vibration reminder. If it says'Not wearing the watch,'you need to wearthe watch again. 8 Enterthe b|ood pressure measurement interface, and the bottom test Iight Blood will light up. lttakes 30 to 60 seconds, and there will be a vibration reminder '"'''"-" when the measurement is completed. C Enterthe b|ood oxygen measurementinterface, andthe bottomtestIightwi|| 6, light up. It takes 30 to 60 seconds, and there will be a vibration reminder when S沁,the measurementis completed. O Thewatchcansyncnotificationsfrom common sociaIapps Me s sage Note: You can enable/disable sync notifications in the app 色Whenthe watch,s connected to the app, the weather mterfacewlII dlSpIay U real-time weather and temperature, as well as weather conditions for the Weather week 子'00+sports modes such as wa|king, running, cyc|ing, skipping, basketba11, etc. are included. Click the icon to start exercising. When connected to the Sport s app,y ou can view more detailed content. (SJ A _ft e '. th ? _ watch is connected to the app, you can control the phone's .-;;;, music player. � System pr �C ets _ rn m � 2n ti mer intervals. Click to quickly time. Click the ,;;;"., custom button to set the time. 0 Afterthe smartwatchis connected to the app,you can set singIe mode Alarm alarms or recurring alarms. C) Clic , '.� Star _ t ,'_ oncet �, )art . the timer, click'Pause'once to pause the timer, 女op'w' a <ch and'Reset'to resetthe timer to mo 尽Whenthe deviceis connected to the app, dick'Find Phone,'and the phone will ring to indicate a successful search. If the watch is notconnected to the 品品 app,it will promptthatthe phone is not connected 吕Youc!n enable'Reminders to Move'in the app to remind you to take breaks Seden切"everyhour 「.mmde「 区ControlCenter:Do Not Disturb Mode, Power Saving Mode, Brightness 云俘'Adjustment,FlashHght, Electconlc Busloess Card, Settlogs Waterproof Waterproof:IPXB (3ATM) Notes 1. This app Is not a med I cal device. Data obtained during the use of this app Is for reference only, and should not be used for cnnlcal dlagnosls,medlcal research, diagnostic, or treatment purposes. 2. To ensure long-term use of this product, It should not be used In hot water/sauna environments to prevent steam damage to the equipment Common Issues 1. The watch cannot be tu med on. Please pcess and hold the powe, button foe mo,e than 3 seconds oc the batte,y may be low and needs chacglng 2. Wlceless Is not connected o, cannot connect 1)Try restartingthewatch and reconnecting 2) T,y connecting again afte,,estartlngyou, phone's Wice less 3) Do not connectyou, phone to othe, Wl,eless devices at the same time 4)When Wireless ls dlsconnected,functlOns such as caIIs, message nouficatlOns, and health data syncing wlll not wo,k. 3. Manual heart,ate/blood oxygen/blood pcessu,e measu,ements ace lnaccu,ate 1) Du,lnggenecal measu,ements, the senso, on the watch may not be In comct contactwith the body. 2) Pay attention to ensuringthe sensor is in fuII contactwith the…

Text truncated - open the document above for the full version.

FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Photo 9 Appearance of EUT Photo 10 Appearance of EUT

FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Appendix I Label Appendix II Label Location FCC ID: 2BFXV-KT79 Model: KT79

FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 11 Internal of EUT Photo 12 Appearance of PCB FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Photo 13 Appearance of PCB Photo 14 Battery Appearance BT Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202408-0165-1 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2BFXV-KT79 1. General Information about EUT 1.1 Client Information Applicant : Shenzhen Millay Century Technology Co., Ltd. Address : 4th Floor, Building I, No. 212 Pu'an Road, Liuyue Community, Henggang Street, Longgang District, Shenzhen,China Manufacturer : Shenzhen Millay Century Technology Co., Ltd. Address : 4th Floor, Building I, No. 212 Pu'an Road, Liuyue Community, Henggang Street, Longgang District, Shenzhen,China 1.2 General Description of EUT (Equipment Under Test) EUT Name : Smart Watch Models No. : KT79 Model Different : N/A Brand Name : N/A Sample ID : HC-C-202408-0165-01-01 Product Description : Operation Frequency: Bluetooth&BLE: 2402MHz~2480MHz Antenna Gain: 0dBi Conducting Wire Antenna Power Rating : USB Input: DC 5V DC 3.7V 430mAh Rechargeable Li-ion battery Software Version : MOY-JQ12-2.0.3 Hardware Version : MOY.MA1009.01 Remark: The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: TBR-C-202408-0165-1 Page: 2 of 3 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤7.5.0 for 10-g SAR 2. Summary simultaneous transmission for SAR Exclusion The SAR exemption limits outlined in clause 4.3.2(b) of KDB 447498 have been derived based on an approximate SAR value of 0.4 W/kg using half-wave dipole antennas Footnote 1. As such, when simultaneous transmitter SAR evaluations include transmitters that have been exempt from routine SAR evaluation, the SAR must be estimating based on the ratio between the maximum tune-up tolerance limit of the transmitter that has been exempt and the exemption limit at the specific distance and frequency for that transmitter. This ratio must be multiplied by 0.4 W/kg (2.0 W/kg for controlled use and 1.0 W/kg for limb worn devices) in order to calculate the estimated SAR level. The estimate SAR value is calculated based the following equation: (maximum power level including tune-up tolerance for transmitter A / maximum power level of exemption at the same frequency and distance) * 0.4W/kg The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. Report No.: TBR-C-202408-0165-1 Page: 3 of 3 TB-RF-074-1.0 3. Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 3.794 3±1 4 2.512 0.779 3.0 2441 3.14 3±1 4 2.512 0.785 3.0 2480 2.632 3±1 4 2.512 0.791 3.0 Bluetooth Mode (π/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 4.129 4±1 5 3.162 0.980 3.0 2441 3.439 4±1 5 3.162 0.988 3.0 2480 2.821 3±1 4 2.512 0.791 3.0 Bluetooth Mode (8-DPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 4.408 4±1 5 3.162 0.980 3.0 2441 3.667 4±1 5 3.162 0.988 3.0 2480 3.041 4±1 5 3.162 0.996 3.0 BLE 1M Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 4.095 4±1 5 3.162 0.980 3.0 2440 3.319 4±1 5 3.162 0.988 3.0 2480 2.759 3±1 4 2.512 0.791 3.0 BLE 2M Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 4.125 4±1 5 3.162 0.980 3.0 2440 3.4 4±1 5 3.162 0.988 3.0 2480 2.88 3±1 4 2.512 0.791 3.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF REPORT-----

深圳市一线通线缆有限公司 地址：深圳市宝安区沙井街道万丰98工业城21栋 天线规格承认书 Antenna Specification for Approval 客户名 称 CustomerName：深圳市魔样科技有限公司 产品名称： ProductName： 2.4G天线 全长25mm红色 客户型号： ProductName: 产品料号： Part NO.: C10 - 35- 2.5 制 表 ： WriteBy：庄杰彬 日 期： IssuedDate: 2021 - 10-08 客 户: 工程R& D Dept 采购Business Dept 承认 Approved By 一线通 研发R& D Dept 工程 Engineer Dept 审核 Approval 庄彩虹 庄杰彬 庄杰彬 Product Specification A. ElectricalCharacteristics Frequency 2400MHz ~2500MHz VSWR<3.0 Efficiency >30% Impedance 50 Ohm Polarization Line Gain 0DBi B. Material & MechanicalCharacteristics Material of Radiator Cu Cable Type 1.0 19 P 红 Connector Type : NO Dimension C. Environmental Operation Temperature - 30 °C ~ + 80 ° CStorage Temperature - 30 ° C~+ 85 °C Test Equipment & Conditions 1. NetworkAnalyzers: Agilent 8753D 5071C 2. Communications TestSet: Agilent E5525C 3. 3D Chamber TestSystem Effiency& Gain Radiation Pattern:

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 1 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 RF Test Data for Bluetooth (Conducted Measurements) General Description of EUT Product Name: Smart Watch Test Model: KT79 Sample ID: HC-C-202408-0165-02-01 Environmental Conditions Temperature: 24.2°C Relative Humidity: 52.8% Test Voltage: DC 3.7V Test Engineer: Jolin Lee Note: For a more detailed features description, please refer to the report TBR-C-202408-0165-61 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 2 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 9 3. -20dB Bandwidth .............................................................................................................................................................................. 15 4. Occupied Channel Bandwidth ......................................................................................................................................................... 21 5. Band Edge ........................................................................................................................................................................................ 27 6. Band Edge(Hopping) ........................................................................................................................................................................ 34 7. Conducted RF Spurious Emission .................................................................................................................................................. 41 8. Restrict Band .................................................................................................................................................................................... 51 9. Carrier Frequencies Separation....................................................................................................................................................... 58 10. Number of Hopping Channel ......................................................................................................................................................... 61 11. Dwell Time ....................................................................................................................................................................................... 64 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 3 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 1-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 1-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2441 Ant1 32 4.95 2.5 NVNT 2-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2402 Ant1 32 4.95 2.5 NVNT 3-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2480 Ant1 32 4.95 2.5 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 4 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 5 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 6 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 7 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 8 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202408-0165-61 Page: 9 of 69 FCC ID: 2BFXV-KT79 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 3.794 21 Pass NVNT 1-DH1 2441 Ant1 3.14 21 Pass NVNT 1-DH1 2480 Ant1 2.632 21 Pass NVNT 2-DH1 2402 Ant1 4.129 21 Pass NVNT 2-DH1 2441 Ant1 3.439 21 Pass NVNT 2-DH1 2480 Ant1 2.821 21 Pass NVNT 3-DH1 2402 Ant1 4.408 21 Pass NVNT 3-DH1 2441 Ant1 3.667 21 Pass NVNT 3-DH1 2480 Ant1 3.041 21 Pass Shenzhen Toby Technology C…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202408-0165-61 Page: 1 of 43 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2BFXV-KT79 Report No. : TBR-C-202408-0165-61 Applicant : Shenzhen Millay Century Technology Co., Ltd. Equipment Under Test (EUT) EUT Name : Smart Watch Model No. : KT79 Series Model No. : N/A Brand Name : N/A Sample ID : HC-C-202408-0165-01-01&HC-C-202408-0165-02-01 Receipt Date : 2024-08-21 Test Date : 2024-08-21 to 2024-08-29 Issue Date : 2024-08-29 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Test By : Jolin Lee Reviewed By : Henry Huang Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202408-0165-61 Page: 2 of 43 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................ 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................ 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode ................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility........................................................................................................................... 9 2. TEST SUMMARY..................................................................................................................... 10 3. TEST SOFTWARE .................................................................................................................. 10 4. TEST EQUIPMENT AND TEST SITE .................................................................................. 11 5. CONDUCTED EMISSION ...................................................................................................... 12 5.1 Test Standard and Limit ................................................................................................... 12 5.2 Test Setup........................................................................................................................... 12 5.3 Test Procedure .................................................................................................................. 12 5.4 Deviation From Test Standard......................................................................................... 12 5.5 EUT Operating Mode ........................................................................................................ 13 5.6 Test Data............................................................................................................................. 13 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 14 6.1 Test Standard and Limit ................................................................................................... 14 6.2 Test Setup........................................................................................................................... 15 6.3 Test Procedure .................................................................................................................. 16 6.4 Deviation From Test Standard......................................................................................... 17 6.5 EUT Operating Mode ........................................................................................................ 17 6.6 Test Data............................................................................................................................. 17 7. RESTRICTED BANDS AND BAND EDGE REQUIREMENT .......................................... 18 7.1 Test Standard and Limit ................................................................................................... 18 7.2 Test Setup........................................................................................................................... 18 7.3 Test Procedure .................................................................................................................. 19 7.4 Deviation From Test Standard......................................................................................... 19 7.5 EUT Operating Mode ........................................................................................................ 19 7.6 Test Data............................................................................................................................. 19 8. 99% OCCUPIED AND 20DB BANDWIDTH ....................................................................... 20 8.1 Test Standard and Limit ................................................................................................... 20 8.2 Test Setup..................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Conducted Emission(AC POWER) Photo of Setup for Radiated Emission (30MHz~1GHz) FCC ID: 2BFXV-KT79 TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) -----END OF REPORT-----