2BGPI-78000PowerStation 2.0 multi plug / -power

PowerStation 2.0 multi plug / -power VE242878000 Please read this manual carefully before initial operation and keep it for future reference or other user. User Manual Commissioning Press the power button brifely to check if connect successful. › During the charging process, the product is heated, this is normal. If you find the product gets extremely hot disconnect the power supply and do not use it any more – risk of injury by escaping gases, liquid or explosion! Pr oduct Usage › Use the supplied USB-C cable to connect your portable battery to a power source. › Plug the other end of the USB-C cable into a compatible power adapter or a USB port on your computer. › Make sure that the power source is active and the connection is secure. › You can connect your electronic devices to the portable battery to charge them when they need extra power. Technical details Battery: N/A Input: 5V/3A, 9V/3A Output: USB A 5V/2A Wireless output: 15W (Max) each side. When both sides are charging simultaneously via wireless charging, the output of one side is 15W while the output of the other side is 5W. USB-A output Type c input LED display Wireless Charging Part 2 Wireless Charging Part 1 On/off Made in China Disposal Electrical and electronic equipment must not be disposed of with household waste, but must be returned to a public separate collection or at the point of sale. For more information, please contact your sales outlet or the public authorities. When you dispose of the packaging, pay attention to the relevant regulations in your country. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, Package Includes 1X Power station 1X Charging cable 1X 45W adapter 1X User manual Producer: Metico GmbH, Schulstraße 9, 25491 Hetlingen, Germany www.metico.de Material Number: VE242878000 FCC ID: 2BGPI-78000 which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:16755CoyoteBushDrUnit84,SanDiego,CA92127UnitedStates FRN:0034562900 ContactName:YangyangXu TelephoneNo:(561)875-9826 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofShenzhenZOGITechnologyLimited TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:ShenzhenZOGITechnologyLimited ProductDescription:PowerStation2.0multiplug/-power FRN:0035487578 GranteeCode:2BGPI FCCID:2BGPI-78000 ContactName:CathyLiu Address:A303,DonglianBuilding,Chuangye2ndRoad,BaoanDistrict,Shenzhen,China TelephoneNo:+86-75586556724 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2026/6/26 Applicant’sName: ShenzhenZOGITechnologyLimited USAgentforServiceofProcess’sName: HOPEKCORPORATIONINC Title:ProcessteamLeaderTitle:Manager SignatureSignature

Rev 1/26/2023 Shenzhen ZOGI Technology Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 17, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BGPI-78000 [Shenzhen ZOGI Technology Limited] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen ZOGI Technology Limited] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Cathy Liu Rev 1/26/2023 Shenzhen ZOGI Technology Limited Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 17, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BGPI-78000 [Shenzhen ZOGI Technology Limited] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Cathy Liu

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Shenzhen ZOGI Technology Limited Date: June 17, 2026 Product Model Number: VE242878000, VE242879000 FCC ID: 2BGPI-78000 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: Process team Leader Email: [email protected] Telephone: +86-75586556724 On behalf of: Shenzhen ZOGI Technology Limited

Shenzhen ZOGI Technology Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 26, 2026 Subject; Request for Confidentiality FCC ID: 2BGPI-78000 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cathy Liu Title: Process team Leader

Shenzhen ZOGI Technology Limited Family models declaration letter June 17, 2026 We Shenzhen ZOGI Technology Limited Of A303,Donglian Building, Chuangye 2nd Road, Bao an District, Shenzhen, China Declare under our sole responsibility that the product FCC ID: 2BGPI-78000 Product: PowerStation 2.0 multi plug / -power Model Number: VE242878000, VE242879000 All the models are the same circuit and module, except the colour and model No.. Cathy Liu/ Process team Leader E-mail : [email protected] Phone : +86-75586556724 Fax : N/A Address : A303,Donglian Building, Chuangye 2nd Road, Bao an District, Shenzhen, China

Ext Photos Model: VE242878000 Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

140.00 m m 164.00 mm 56.5 mm 40 mm PowerStation 2.0 multi plug / -power 13.545 – VE242878000 Importer: Red Bull GmbH, Am Brunnen 1, 5330 Fuschl Am See, Austria Capacity: N/A Type-C input: 5V/3A, 9V/3A USB Output: 5V/2A Wireless Charging output: 15W FCC ID: 2BGPI-78000 Made In ChinaRed Bull GmbH

Int Photos Model: VE242878000 Photo 1 Photo 2 Photo 3 Photo 4 ANT ANT Photo 5 Photo 6 Photo 7

- Page 1 of 11 - Report No.: HB20260610003E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: PowerStation 2.0 multi plug / -power Trade Mark: N/A Model Number: VE242878000 FCC ID: 2BGPI-78000 Prepared for Shenzhen ZOGI Technology Limited A303,Donglian Building, Chuangye 2nd Road, Bao an District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 11 - Report No.: HB20260610003E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 4 RF EXPOSURE..................................................................................................................................................... 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Test Setup .................................................................................................................................................... 9 4.1.4. Test Result ................................................................................................................................................... 9 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................11 - Page 3 of 11 - Report No.: HB20260610003E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen ZOGI Technology Limited Address ................................. : A303,Donglian Building, Chuangye 2nd Road, Bao an District, Shenzhen, China Manufacturer's Name .......... : Shenzhen ZOGI Technology Limited Address ................................. : A303,Donglian Building, Chuangye 2nd Road, Bao an District, Shenzhen, China Product description Product name ........................ : PowerStation 2.0 multi plug / -power Model Number ....................... : VE242878000 Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : June 10, 2026~June 17, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g L i u) Authorized Signatory : (L e o S u) - Page 4 of 11 - Report No.: HB20260610003E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 June 17, 2026 Original - Page 5 of 11 - Report No.…

Text truncated - open the document above for the full version.

Page 1 of 3 承认 书 SPECIFICATION FOR APPROVAL 客 户 CUST OMER: 客 户 料 号： CUST P/N: 天 夏 料 号： TX P/N: T X-WPCX-D41.5*0.6-6.5UH 产 品 型 号 DESC: 20.5*39-0.08*48P-10TS-95mm-D41.5*0.6 日期 DATE: 2026/03/27 版本： Version: A.0 拟制 PREPARED BY 审 核 CHECKED BY 批准 APPROVED BY 客户承认 CUST OMER APPROVE Zeng Weihao Zhang Yan Luo Yongjun Shenzhen Tianxia Technology Co., Ltd. Address: Room 523-525, C33 Science and Technology Park, District 33, Bao'an District, Shenzhen City TEL：18718699959 E-mail：[email protected] Page 2 of 3 版本变更历史 V ersion Change History 版本 Rev. 变 更 前 Before Change 变 更 后 After Change 更 改 日 期 Change Date 批准 Approved By A. 0 new issue ---- 2026/03/27 Luo Yongjun Page 3 of 3 产 品 型 号： DESC SPECIFICATION Rev：A.0 客户CUST : 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM Note： 1.1. Coil crossover output 2. Coil not planar 3. Overall thickness of the coil: 1.8mm MAX; 4 - 20 degrees Celsius ~ + - 80 degrees Celsius 三、绕线参数Winding Specification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 0.08*48P 10Ts anticlockwise 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F 4.0 uH ± 10% Independent Coil 100KHz/1.0V LCZ METER 1062B 2 IND. S-F 6.5 microhenries ± 10% with magnetic core 100KHz/1.0V LCZ METER 1062B 3 DCR S-F600mΩ Max LCZ METER 502B 拟制/日期PREPARED BY/DATE 审核 /日期CHECKED BY/DATE Zeng Weihao 2026/03/27 Zhang Yan 2026/03/27 20.5 * 39 - 0.08 * 48P - 10TS - 95mmD 41.5 * 0.6 Dual-slot outlet with adhesive backing - 6.5uh D 95±2mm E 3mm±1.5mm H 1.8mmMAX A 20.5±0.5mm B 39.5±0.5mm C 41.5±1mm F 5.3±0.5mm

- Page 1 of 31 - Report No.: HB20260610003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: PowerStation 2.0 multi plug / -power Trade Mark: N/A Model Number: VE242878000 FCC ID: 2BGPI-78000 Prepared for Shenzhen ZOGI Technology Limited A303,Donglian Building, Chuangye 2nd Road, Bao an District, Shenzhen, China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 31 - Report No.: HB20260610003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................ 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 6 1.5 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 9 4 LIST OF TEST EQUIPMENT .................................................................................................................................10 5 TEST ITEM AND RESULTS ...................................................................................................................................12 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................23 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................25 - Page 3 of 31 - Report No.: HB20260610003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen ZOGI Technology Limited Address ................................. : A303,Donglian Building, Chuangye 2nd Road, Bao an District, Shenzhen, China Manufacturer's Name .......... : Shenzhen ZOGI Technology Limited Address ................................. : A303,Donglian Building, Chuangye 2nd Road, Bao an District, Shenzhen, China Product description Product name ........................ : PowerStation 2.0 multi plug / -power Model Number ....................... : VE242878000 Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020+Cor. 1-2023 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : June 10, 2026~June 17, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 31 - Report No.: HB20260610003E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan …

Text truncated - open the document above for the full version.

Photographs of the Test Setup Model: VE242878000 Radiated Emission Below 30MHz Radiated Emission Above 30MHz Conducted emission MPE