2BGZB-Y102Montre sportive GPS intelligente

Pr Montre sportive GPS intelligente oduct User Manual 1. .PRODUCT INTRODUCTION&BUTTON DEFINITIONS 2.TOUCH SCREEN CONTROL DEFINITIONS Swipe down: dial interface swipe down to openstatus bar. Swipe up: dial interface swipe up to enter notification information interface Swipe left: dial interface swipe left to enter shortcut function Swipe right: dial interface swipe right to enter main menu interface On the watch face interface, press and hold the watch face for 2-3 seconds to switch watch faces. Swipe left or right to switch watch faces, and click to select a. 3.Charge 1. When the watch indicates low battery power, please charge it immediately. The charging time is 2-3 hours. 2. The watch uses magnetic charging. Align the charging contacts on the charging cord with the charging port on the watch to begin charging. Continue until the watch’s screen displays a charging indicator. 3. During charging, in order to ensure stable charging, the watch will turn off its screen for charging. Pressing a button can wake the watch up. When the watch’s battery is low, it needs to be charged for 3-5 minutes before it can be woken up. This is a normal situation. Please wait for 5 minutes before checking the charging status of the watch. 4. Please use a charger with a rated output voltage of 5V and a rated output current of 0.5A to 2A, or the USB port of a computer, to charge the watch. 5. When your watch is not in use for an extended period, please fully charge it and then turn it off and store it. Do not leave it in a depleted state for an extended period. This could damage the battery due to prolonged depletion. 4.Use GPS 1. In order to get a better experience, please connect and bind the APP when using the GPS function for the first time. Within about 3 minutes after binding, the "GloryFitPro" app will send GPS ephemeris orbit and other data to the watch via Bluetooth in the background. After the ephemeris is successfully sent, the GPS positioning time can be greatly shortened. If the sending is not successful, the watch will pop up the "AGPS has expired" reminder when you open the sports with GPS function for the first time. AGPS expiration will cause the positioning time to be too long, affecting the positioning experience. You can try to unbind and bind the watch APP again. And wait for 2 minutes before trying to use the GPS function. If APGS is sent successfully, the "AGPS has expired" reminder will not pop up when you open the GPS function for the first time. 2. At 09:00 every morning, the "GloryFitPro" app will re-acquire the latest GPS ephemeris data of the day. The watch obtains the latest GPS ephemeris data when Bluetooth is connected. 3. The GPS positioning time is too long and whether the GPS track drifts are greatly affected by environmental factors. Choosing an open place or away from high-rise buildings will help GPS to quickly locate and reduce the deviation of the track. 6.GPS usage interface AGPS has expiredGPS location detectedGPS location establishedPositioning complete In motion 7.APP connection Scan the watch’s QR code or visit major app marketplaces to download and install the “GloryFitPro” app. When you first open the app, a permission pop-up window will appear. Please click “Allow” to ensure that the app has the necessary permissions. Open GloryFit and set Personal informations Switch to “Device”page and click”Add device”or“Scanning”icon Find your device in the scan list Binding completed During the connection process, there will be pop-up prompts indicating confirmation of pairing with the watch or phone. Please click to confirm the pairing. Once the connection is established, the call icon and data connection icon in the watch’s status bar will turn green. In the gray state, it indicates that there is no connection. 5.Overview of key features Control Center: Bluetooth call activation/deactivation, brightness adjustment, mute switch, power-saving mode switch, system information, settings, etc. (+ manual additions can be made). Call Function: This feature requires connecting to audio Bluetooth. When entering dial mode, you can input the phone number as needed and then dial by pressing keys 7 or 9. Long-press keys 2 for 2 seconds to input asterisks (*) and dashes (#). Frequently used contacts: These need to be added in the contact list section of the app. The added contacts will be automatically synchronized with the device. A maximum of 100 contacts and 1 SOS contact can be added. Call log: The most recent 10 call records can be saved. Bluetooth Calling: After the watch is connected to the app, a pop-up window for Bluetooth calling will appear. The user must grant permission for the connection request. Once connected, the user can use the Bluetooth calling feature. Exercise data: Displays the steps, distance, and calorie data recorded on that day, as well as the steps data from the past seven days. Users can set their target step count, distance, and calorie goals through the app’s settings. Exercise modes: The device comes with 14 pre-installed exercise modes by default: outdoor running, outdoor walking, indoor walking, indoor running, outdoor cycling, indoor cycling, swimming in a pool, open-water swimming, triathlon, hiking, elliptical trainer, rowing machine, dance, and free training. Additionally, users can manually select and add over 160 additional exercise modes to the watch. The watch can support up to 24 built-in exercise modes, allowing users to switch between them as needed. Exercise log: This interface stores your last 10 exercise sessions. Historical records allow you to view the duration of exercise, heart rate, and more. Calorie counts, etc. Heart Rate: When you enter the heart rate measurement interface, the bottom green light illuminates to begin the measurement. There will be a vibration alert approximately 45 seconds after the measurement is complete. If it indicates that the watch is not worn, you need to properly reattach it. The device can display the user…

Text truncated - open the document above for the full version.

CoveredEquipmentAttestationLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoSection2.911(d)(5)(i)-(ii)oftheCommission’sRules(47C.F.R.)weattestasfollows fortheproductlistedbelow: FCCIDModelname 2BGZB-Y102Y102,Y20,Y22,Y11,Y25,Y35,Y99,Y100,Y101, Y105,Y106,Y107,Y108,Y109,RH67 We, Applicant CompanyName:ShenzhenFengxingdaTechnologyCo.ltd Address:601,buildB,No.194,Chongqingroad, Zhanchengcommunity,Fuhaistreet,Baoan district,ShenzhenCity,Guangdong province,China Phone:18124119890 certifythattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCC rules.Thisincludesthecybersecurityandanti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofit’ssuccessorsandassignees. Wecertifythat,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedon theCoveredListasanentityproducing“covered”equipment. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, {新申请人签名} SignatureDate:2026-5-14 PrintedNameofSignee:Mrli/N/A Company:ShenzhenFengxingdaTechnologyCo.ltd Address:601,buildB,No.194,Chongqingroad,Zhanchengcommunity,Fuhaistreet,Baoan district,ShenzhenCity,Guangdongprovince,China Phone:18124119890Fax:0755-26509195 Email:[email protected]

ConfidentialityRequestLetter ForCertificationServiceintheUSA FederalCommunicationsCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21048 Towhomitmayconcern PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)andSection §552(b)(4)oftheFreedomofInformationAct,werequestconfidentialityforthe documentationofthefollowingproducts: FCCIDModelname 2BGZB-Y102Y102,Y20,Y22,Y11,Y25,Y35,Y99,Y100,Y101, Y105,Y106,Y107,Y108,Y109,RH67 Fortheproductslistedabove,werequestpermanentconfidentialityforallapplicableexhibits asthereare:  theOperationalDescription theBlockDiagram  theSchematics Theabovelistedexhibitscontaintradesecretsandproprietaryinformationthatcouldbeof benefittoourcompetitors. Ifyouhaveanyquestions,pleasefeelfreetocontactusattheaddressshownbelow. Sincerely, { 新申请人签名 } Signature Date:2026-5-14 PrintedNameofSignee:Mrli/N/A Company:ShenzhenFengxingdaTechnologyCo.ltd Address:601,buildB,No.194,Chongqingroad,Zhanchengcommunity,Fuhaistreet,Baoan district,ShenzhenCity,Guangdongprovince,China Phone:18124119890Fax:0755-26509195 Email:[email protected]

ShenzhenFengxingdaTechnologyCo.ltd Add:601, build B, No.194,Chongqingroad, Zhanchengcommunity,Fuhai street,Baoan district,ShenzhenCity, Guangdongprovince,China Date: 2026-5-14 FCC ID: 2BGZB-Y102 Dear Sir/Madam, We, Shenzhen Fengxingda Technology Co.ltd Hereby declares the following statement for Federal Communications Commission, All these models are identical in terms of the same printed circuit board, layout and circuitry. The difference lies in the model names and appearance colors and strap materials. Product name: Montre sportive GPS intelligente Modelno.:Y102,Y20,Y22,Y11,Y25,Y35,Y99,Y100,Y101,Y105,Y106,Y107,Y108,Y109,RH67 Sincerely, {新申请人签名} Name/Title： Mr li/N/A Company: ShenzhenFengxingdaTechnologyCo.ltd Address: 601, build B, No.194,Chongqingroad, Zhancheng community,Fuhai street,Baoandistrict,ShenzhenCity, Guangdongprovince,China Phone: 18124119890 Fax: 0755-26509195 E-Mail: [email protected]

FCC ID: 2BGZB-Y102 www.cotecna-toby.com TB-RF-073-3.1 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2BGZB-Y102 www.cotecna-toby.com TB-RF-073-3.1 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2BGZB-Y102 www.cotecna-toby.com TB-RF-073-3.1 Photo 5 Appearance of EUT Photo 6 Appearance of EUT

FCC ID:2BGZB-Y102 www.cotecna-toby.com TB-RF-073-3.1 Appendix I Label Appendix II Label Location FCC ID:2BGZB-Y102 Model:Y102

FCC ID: 2BGZB-Y102 www.cotecna-toby.com TB-RF-073-3.1 Appendix IV EUT Internal Photographs Photo 7 Internal of EUT Photo 8 Internal of EUT BT Ant. FCC ID: 2BGZB-Y102 www.cotecna-toby.com TB-RF-073-3.1 Photo 9 Appearance of PCB Photo 10 Appearance of PCB FCC ID: 2BGZB-Y102 www.cotecna-toby.com TB-RF-073-3.1 Photo 11 Battery Appearance

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202604-0128-9 Page: 1 of 8 TB-RF-073-3.1 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Email: [email protected] www.cotecna-toby.com Maximum Permissible Exposure Evaluation FCC ID: 2BGZB-Y102 Report No. : TBR-C-202604-0128-9 Applicant : Shenzhen Fengxingda Technology Co.ltd Equipment Under Test (EUT) EUT Name : Montre sportive GPS intelligente Model No. : Y102 Series Model No. : Y20,Y22,Y11,Y25,Y35,Y99,Y100,Y101,Y105,Y106,Y107,Y108,Y109, RH67 Brand Name : N/A Sample ID : HC-C-202604-0128-01-01 Receipt Date : 2026-04-24 Test Date : 2026-04-24 to 2026-05-14 Issue Date : 2026-05-14 Standards : FCC Part 2.1093 Test Method : KDB 447498 D01 General RF Exposure Guidance v06 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Test By : Lily zhang Reviewed By : Henry huang Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202604-0128-9 Page: 2 of 8 www.cotecna-toby.com TB-RF-073-3.1 CONTENTS CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 4 1.1 Client Information ................................................................................................................. 4 1.2 General Description of EUT (Equipment Under Test) ................................................... 4 2. MEASUREMENT UNCERTAINTY .......................................................................................... 5 3. TEST FACILITY.......................................................................................................................... 6 4. SAR TEST EXCLUSION CALCULATIONS .......................................................................... 7 Report No.: TBR-C-202604-0128-9 Page: 3 of 8 www.cotecna-toby.com TB-RF-073-3.1 Revision History Report No. Version Description Issued Date TBR-C-202604-0128-9 Rev.01 Initial issue of report 2026-05-14 Report No.: TBR-C-202604-0128-9 Page: 4 of 8 www.cotecna-toby.com TB-RF-073-3.1 1. General Information about EUT 1.1 Client Information Applicant : Shenzhen Fengxingda Technology Co.ltd Address : 601, build B, No.194, Chongqing road, Zhancheng community, Fuhai street, Baoan district, Shenzhen City, Guangdong province,China Manufacturer : Shenzhen Fengxingda Technology Co.ltd Address : 601, build B, No.194, Chongqing road, Zhancheng community, Fuhai street, Baoan district, Shenzhen City, Guangdong province,China 1.2 General Description of EUT (Equipment Under Test) EUT Name : Montre sportive GPS intelligente Models No. : Y102, Y20,Y22,Y11,Y25,Y35,Y99,Y100,Y101,Y105,Y106,Y107, Y108,Y109,RH67 Model Different : These models are exactly the same in terms of printed circuit boards, layout and circuits. The only differences lie in the model names, appearance colors and strap materials. Product Description : Operation Frequency: Bluetooth&BLE: 2402MHz~2480MHz Modulation Type: Bluetooth&BLE: GFSK, Pi/4-DQPSK, 8DPSK Antenna Gain: -8.07dBi Internal Antenna Power Rating : USB Input: DC 5V DC 3.8V 740mAh Rechargeable Li-ion battery Software Version : ATS328SFFV000622_ Hardware Version : AT328SV01 Remark: The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: TBR-C-202604-0128-9 Page: 5 of 8 www.cotecna-toby.com TB-RF-073-3.1 2. Measurement Uncertainty The reported uncertainty of measurement y±U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2，providing a level of confidence of approximately 95 %. Test Item Parameters Expanded Uncertainty (ULab) Conducted Emission Level Accuracy: 9kHz~150kHz 150kHz to 30MHz ±3.50 dB ±3.10 dB Radiated Emission Level Accuracy: 9kHz to 30 MHz ±4.60 dB Radiated Emission Level Accuracy: 30MHz to 1000 MHz ±4.50 dB Radiated Emission Level Accuracy: Above 1000MHz ±4.20 dB Temperature / ±0.6°C Humidity / ±4% Supply voltages / ±2% Time / ±4% Report No.: TBR-C-202604-0128-9 Page: 6 of 8 www.cotecna-toby.com TB-RF-073-3.1 3. Test Facility The testing report were performed by the Shenzhen Toby Technology Co., Ltd., in their facilities located at 1/F., Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. At the time of testing, the following bodies accredited the Laboratory: CNAS (L5813) The Laboratory has been accredited by CNAS to ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories for the competence in the field of testing. And the Registration No.: CNAS L5813. A2LA Certificate No.: 4750.01 The laboratory has been accredited by American Association for Laboratory Accreditation(A2LA) to ISO/IEC 17025：2017 General Requirements for the Competence of Testing and Calibration Laboratories for the technical competence in the field of Electrical Testing. And the A2LA Certificate No.: 4750.01.FCC Accredited Test Site Number: 854351. Designation Number: CN1223. IC Registration No.: (11950A) The Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing. The site registration: Site# 11950A. CAB identifier: CN0056. Report No.: TBR-C-202604-0128-9 Page: 7 of 8 www.cotecna-toby.com TB-RF-073-3.1 4. SAR Test Exclusion Calculations 4.1 FCC: According to KDB 447498 D01 v06 Mobile and Portable Devices RF Exposure Procedu…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202604-0128-41 Page: 1 of 39 TB-RF-073-3.1 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Email: [email protected] www.cotecna-toby.com Radio Test Report FCC ID: 2BGZB-Y102 Report No. : TBR-C-202604-0128-41 Applicant : Shenzhen Fengxingda Technology Co.ltd Equipment Under Test (EUT) EUT Name : Montre sportive GPS intelligente Model No. : Y102 Series Model No. : Y20,Y22,Y11,Y25,Y35,Y99,Y100,Y101,Y105,Y106,Y107,Y108,Y109, RH67 Brand Name : N/A Sample ID : HC-C-202604-0128-01-01&HC-C-202604-0128-02-01 Receipt Date : 2026-04-24 Test Date : 2026-04-24 to 2026-05-14 Issue Date : 2026-05-14 Standards : FCC Part 15 Subpart C 15.247 Test Method : KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.10: 2020+Cor.1:2023+C63.10a: 2024+Errata to C63.10a: 2024 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Test By : Lily zhang Reviewed By : Henry huang Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202604-0128-41 Page: 2 of 39 www.cotecna-toby.com TB-RF-073-3.1 Contents CONTENTS ............................................................................................................................................ 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................ 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 7 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode ................................................................................................... 8 1.6 Description of Test Software Setting ................................................................................ 9 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility......................................................................................................................... 11 2. TEST SUMMARY..................................................................................................................... 12 3. TEST SOFTWARE .................................................................................................................. 12 4. TEST EQUIPMENT AND TEST SITE .................................................................................. 13 5. CONDUCTED EMISSION ...................................................................................................... 14 5.1 Test Standard and Limit ................................................................................................... 14 5.2 Test Setup........................................................................................................................... 14 5.3 Test Procedure .................................................................................................................. 14 5.4 Deviation From Test Standard......................................................................................... 14 5.5 EUT Operating Mode ........................................................................................................ 15 5.6 Test Data............................................................................................................................. 15 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 16 6.1 Test Standard and Limit ................................................................................................... 16 6.2 Test Setup........................................................................................................................... 17 6.3 Test Procedure .................................................................................................................. 18 6.4 Deviation From Test Standard......................................................................................... 19 6.5 EUT Operating Mode ........................................................................................................ 19 6.6 Test Data............................................................................................................................. 19 7. RESTRICTED BANDS AND BAND EDGE REQUIREMENT .......................................... 20 7.1 Test Standard and Limit ................................................................................................... 20 7.2 Test Setup........................................................................................................................... 20 7.3 Test Procedure .................................................................................................................. 21 7.4 Deviation From Test Standard......................................................................................... 21 7.5 EUT Operating Mode ........................................................................................................ 21 7.6 Test Data............................................................................................................................. 21 8. 99% OCCUPIED AND 20DB BANDWIDTH ....................................................................... 22 8.1 Test Standard and Limit ................…

Text truncated - open the document above for the full version.

致力于为客户提供专业级天线解决方案 Yigu Electronics-Y02: Antenna Optimization Report 致力于为客户提供专业级天线解决方案 1 Project Commissioning Overview Report Version Outline Antenna passive efficiency Actual measurement of the antenna for star search directional diagram Environmental Treatment 2 3 4 5 6 致力于为客户提供专业级天线解决方案 Project Commissioning Overview type watch Band and antenna material GPS/BT Frequency material quality 1575.42MHz/2.4G performance requirement Implement according to customer requirements 致力于为客户提供专业级天线解决方案 S11 致力于为客户提供专业级天线解决方案 GPS Star Tracking-Arm 致力于为客户提供专业级天线解决方案 Antenna efficiency, gain Frequency （ MHz ） Gain （ dBi ） Efficiency （ dB ） Efficiency （ % ） 2400-8.21-11.696.77 2410-8.17-11.816.59 2420-8.07-11.786.64 2430-8.89-12.226 2440-8.65-12.206.03 2450-8.43-12.116.15 2460-8.55-12.146.11 2470-8.81-12.355.82 2480-8.58-12.345.84 2490-8.35-12.156.09 2500-8.35-12.156.1 Frequency （ MHz ） Gain （ dBi ） Efficiency （ dB ） Efficiency （ % ） 1570-3.05-7.6417.21 1571-3.05-7.6317.26 1572-3.05-7.6217.32 1573-3.05-7.5917.40 1574-3.04-7.5617.52 1575-3.02-7.5317.68 1576-2.99-7.4717.89 1577-2.95-7.4118.14 1578-2.94-7.3518.43 1579-2.88-7.2718.74 1580-2.83-7.2019.06 致力于为客户提供专业级天线解决方案 GPS Apple Image 致力于为客户提供专业级天线解决方案 GPS directional diagram 致力于为客户提供专业级天线解决方案 BT Apple Image 致力于为客户提供专业级天线解决方案 BT directional diagram 致力于为客户提供专业级天线解决方案 Environmental Treatment 1.The speaker is covered with conductive cotton. 2.The wiring strip is attached to a conductive fabric and connected to a metal plate. The original pack battery has been canceled. 致力于为客户提供专业级天线解决方案 Environmental Treatment 3.The metal sheet of the speaker is attached to conductive cotton and connected to the back of the PCB. 致力于为客户提供专业级天线解决方案 Environmental Treatment 4.Apply conductive fabric to the wiring strip 5.Press the foam pad to align the wiring lines for consistency 致力于为客户提供专业级天线解决方案 Environmental Treatment 6.Trim the stratum near the feed point of the patch cord. 7.Apply the conductive fabric and the insulating film. 致力于为客户提供专业级天线解决方案 Spring Usage Instructions 致力于为客户提供专业级天线解决方案 Match Description 致力于为客户提供专业级天线解决方案 Antenna size diagram Address: 4th Floor, Building 2, Taiyun Innovation Valley, South Guangming Avenue, Guangming New District, Shenzhen Tel: 0755-23984257 Fax: 0755-86090455

Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202604-0128-41 Page: 1 of 69 FCC ID: 2BGZB-Y102 TB-RF-073-3.1 RF Test Data for Bluetooth (Conducted Measurements) General Description of EUT Product Name: Montre sportive GPS intelligente Test Model: Y102 Sample ID: HC-C-202604-0128-01-01 Environmental Conditions Temperature: 24.6°C Relative Humidity: 48.6% Test Voltage: DC 3.8V Test Engineer: Lily zhang Note: For a more detailed features description, please refer to the report TBR-C-202604-0128-41 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202604-0128-41 Page: 2 of 69 FCC ID: 2BGZB-Y102 TB-RF-073-3.1 Contents 1. Duty Cycle ..................................................................................................................................................................................... 3 2. Dwell Time ..................................................................................................................................................................................... 9 3. Maximum Conducted Output Power .......................................................................................................................................... 15 4. -20dB Bandwidth ......................................................................................................................................................................... 21 5. Occupied Channel Bandwidth .................................................................................................................................................... 27 6. Band Edge ................................................................................................................................................................................... 33 7. Band Edge(Hopping) ................................................................................................................................................................... 40 8. Conducted RF Spurious Emission ............................................................................................................................................. 47 9. Restrict Band ............................................................................................................................................................................... 57 10. Carrier Frequencies Separation ........................................................................................................................................ 64 11. Number of Hopping Channel ............................................................................................................................................. 67 Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202604-0128-41 Page: 3 of 69 FCC ID: 2BGZB-Y102 TB-RF-073-3.1 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH5 2402 Ant1 76.53 1.16 0.35 NVNT 1-DH5 2441 Ant1 76.53 1.16 0.35 NVNT 1-DH5 2480 Ant1 76.53 1.16 0.35 NVNT 2-DH5 2402 Ant1 76.93 1.14 0.35 NVNT 2-DH5 2441 Ant1 76.93 1.14 0.35 NVNT 2-DH5 2480 Ant1 76.93 1.14 0.35 NVNT 3-DH5 2402 Ant1 76.8 1.15 0.35 NVNT 3-DH5 2441 Ant1 76.93 1.14 0.35 NVNT 3-DH5 2480 Ant1 76.8 1.15 0.35 Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202604-0128-41 Page: 4 of 69 FCC ID: 2BGZB-Y102 TB-RF-073-3.1 Test Graphs Duty Cycle NVNT 1-DH5 2402MHz Ant1 Duty Cycle NVNT 1-DH5 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202604-0128-41 Page: 5 of 69 FCC ID: 2BGZB-Y102 TB-RF-073-3.1 Duty Cycle NVNT 1-DH5 2480MHz Ant1 Duty Cycle NVNT 2-DH5 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202604-0128-41 Page: 6 of 69 FCC ID: 2BGZB-Y102 TB-RF-073-3.1 Duty Cycle NVNT 2-DH5 2441MHz Ant1 Duty Cycle NVNT 2-DH5 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202604-0128-41 Page: 7 of 69 FCC ID: 2BGZB-Y102 TB-RF-073-3.1 Duty Cycle NVNT 3-DH5 2402MHz Ant1 Duty Cycle NVNT 3-DH5 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202604-0128-41 Page: 8 of 69 FCC ID: 2BGZB-Y102 TB-RF-073-3.1 Duty Cycle NVNT 3-DH5 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.cotecna-toby.com Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report N…

Text truncated - open the document above for the full version.