2BGZB-Y11smart watch

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ShenzhenFengxingdaTechnoloqyCo.ltd 601,buildB,No.194,Chongqingroad,Zhanchengcommunity,Fuhaistreet,Baoan district,ShenzhenCity,Guangdongprovince,China FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024-6-14 Towhomitmayconcern: We,ShenzhenFengxingdaTechnoloqyCo.ltd,herebycertifythattheequipmentforwhich authorizationissought(FCCID:2BGZB-Y11)isnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing“covered”equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(b)and(d)(5)and(6). TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRas wellasKDB986446D01. Sincerely, Signature Mrli Certificationmanager ShenzhenFengxingdaTechnoloqyCo.ltd 6 2 _ [ m o d e l ] C o v e r e d E q u _ 2 . 9 1 1 ( d ) ( 5 ) ( i ) a n d ( i i ) - U , V 0 3

ShenzhenFengxingdaTechnoloqyCo.ltd 601, build B, No.194,Chongqingroad, Zhanchengcommunity,Fuhai street,Baoandistrict,ShenzhenCity, Guangdongprovince,China FederalCommunicationsCommission Authorizationand EvaluationDivision EquipmentAuthorizationBranch 7435 OaklandMills Road Columbia,MD 21046 2024-6-14 U.S. AgentDesignation ShenzhenFengxingdaTechnoloqyCo.ltdacknowledgestheir consentfor the followingcontactlocatedin the UnitedStatesto act as their agent for serviceof processfor the equipmentfor which authorizationis sought(FCC ID:2BGZB-Y11): Nameand companyof U.S. agent:ACT Lab LLC PhysicalU.S. addressof agent:3280 East 59th StreetLong Beach,CA 90805UnitedStates FRN of U.S. agent:0033465568 Email addressof U.S. agent:[email protected] ACT Lab LLCacknowledgestheir obligationto acceptserviceof processon behalfofShenzhenFengxingda TechnoloqyCo.ltd. ShenzhenFengxingdaTechnoloqyCo.ltdwith the FRN[0035557115]acceptsits obligationto maintainan agentfor serviceof processin the UnitedStatesfor no less than one year after eitherthe granteehas permanentlyterminatedall marketingand importationof the applicableequipmentwithinthe U.S., or the conclusionof any Commission-relatedadministrativeor judicialproceedinginvolvingthe equipment,whicheveris later. By signingthis form, we confirmthe aboveand that we are awareof the applicationrequirementslisted under§ 2.911(d)(7). The informationprovidedin this letter is basedon the referencedrule parts of Title 47 of the CFR as well as KDB 986446D01. An expirationdate for this letter does not exist. In case the U.S. agent changes,the granteeis obligatedto notify the FCC within 30 days via the grantingTCB. Sincerely, Signature Mr li Certificationmanager ShenzhenFengxingdaTechnoloqyCo.ltd {代理商签名 } Signature Scott Huber SeniorTechnicalDirector ACT Lab LLC 48_[model] US_Agent_2.911(d)(7)-U, V05

CONFIDENTIALITYREQUEST forCertificationServiceinUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21046 Date:<2024-6-14> PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)and Section§552(b)(4)oftheFreedomofInformationAct,werequestsconfidentialityfor thefollowingproducts: FCCIDModelname 2BGZB-Y11Y11 Fortheproductstatedabove,werequestthatthefollowinginformationbeheld confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term ConfidentialityDays ExternalPhotos InternalPhotos BlockDiagram Schematics TestSetupPhotos User’sManual PartsList TuneUp OperationalDescriptions Thelong-termconfidentialityexhibitscontainourtradesecretsandproprietary informationthatcouldbeofbenefittoourcompetitors. Theshort-termconfidentialityonthebasisofensuringthatbusinesssensitive informationremainsconfidentialuntiltheactualmarketingofournewdevice. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Sincerely, Name/Title： Mrli/Certificationmanager Company: ShenzhenFengxingdaTechnoloqyCo.ltd Address: 601,buildB,No.194,Chongqingroad,Zhancheng community,Fuhaistreet,Baoandistrict,ShenzhenCity, Guangdongprovince,China Phone: +8618124119890 Fax: N/A E-Mail: [email protected]

ShenzhenFengxingdaTechnoloqyCo.ltd 601,buildB,No.194,Chongqingroad,Zhanchengcommunity,Fuhaistreet,Baoandistrict,ShenzhenCity, Guangdongprovince,China FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 2024-6-14 Towhomitmayconcern: We,theundersigned,herebyauthorizeEurofinsProductServiceGmbHtoactonourbehalfinall mattersrelatingtoapplicationsforequipmentauthorizationFCCID:2BGZB-Y11includingthe signingofalldocumentsrelatedtothesematters. AnyandallactscarriedoutbyEurofinsProductServiceGmbHonourbehalfshallhavethesame effectasactsofourown. Bysigningthisapplicationform,weagreetoEurofins’currentvalidGeneralTermsandConditions (AGB),TestingandCertificationRegulations(PZO)whichcanbeviewedonfollowingwebsite www.eurofins.de/eeorretrievedonrequest. Wealsoherebycertifythatnopartytothisapplicationissubjecttoadenialofbenefits,includingFCC benefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21U.S.C.862. Sincerely, Name/Title ： Mrli/Certificationmanager Company: ShenzhenFengxingdaTechnoloqyCo.ltd Address: 601,buildB,No.194,Chongqingroad,Zhancheng community,Fuhaistreet,Baoandistrict,ShenzhenCity, Guangdongprovince,China Phone: +8618124119890 Fax: N/A E-Mail: [email protected]

FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Photo 7 Appearance of EUT

FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Appendix I Label Appendix II Label Location FCC ID:2BGZB-Y11 Model: Y11

FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 8 Internal of EUT Photo 9 Appearance of PCB FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Photo10 Appearance of PCB Photo 11 Battery Appearance BT Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202405-0110-6 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Maximum Permissible Exposure Evaluation FCC ID: 2BGZB-Y11 1. General Information about EUT 1.1 Client Information Applicant : Shenzhen Fengxingda Technoloqy Co.ltd Address : 601, build B, No.194, Chongqing road, Zhancheng community, Fuhai street, Baoan district, Shenzhen City, Guangdong province, China Manufacturer : Shenzhen Fengxingda Technoloqy Co.ltd Address : 601, build B, No.194, Chongqing road, Zhancheng community, Fuhai street, Baoan district, Shenzhen City, Guangdong province, China 1.2 General Description of EUT (Equipment Under Test) EUT Name : smart watch Models No. : Y11 Model Different : NA Brand Name : ---- Sample ID : HC-C-202405-0110-01-01 Product Description : Operation Frequency: Bluetooth: 2402MHz~2480MHz Antenna Gain: -1dBi Conducting wire Power Rating : USB Input: DC 5V DC 3.8V 280mAh Rechargeable Li-ion battery Software Version : 51A0-Z2924-100 Hardware Version : Z2924V1.1 Remark: The above antenna information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications, the laboratory shall not be held responsible. Report No.: TBR-C-202405-0110-6 Page: 2 of 3 TB-RF-074-1.0 SAR Test Exclusion Calculations 1. FCC: According to KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. (1) Clause 4.3: General SAR test reduction and exclusion guidance Sub clause 4.31: Standalone SAR test exclusion considerations 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6GHz at test separation distance≤5 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤3.0 for 1-g SAR [(max. power of channel, including tune-up tolerance, mW)/(min. test separation, mm)]*[√ f (GHz) ] ≤7.5.0 for 10-g SAR 2. Summary simultaneous transmission for SAR Exclusion The SAR exemption limits outlined in clause 4.3.2(b) of KDB 447498 have been derived based on an approximate SAR value of 0.4 W/kg using half-wave dipole antennas Footnote 1. As such, when simultaneous transmitter SAR evaluations include transmitters that have been exempt from routine SAR evaluation, the SAR must be estimating based on the ratio between the maximum tune-up tolerance limit of the transmitter that has been exempt and the exemption limit at the specific distance and frequency for that transmitter. This ratio must be multiplied by 0.4 W/kg (2.0 W/kg for controlled use and 1.0 W/kg for limb worn devices) in order to calculate the estimated SAR level. The estimate SAR value is calculated based the following equation: (maximum power level including tune-up tolerance for transmitter A / maximum power level of exemption at the same frequency and distance) * 0.4W/kg The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. Report No.: TBR-C-202405-0110-6 Page: 3 of 3 TB-RF-074-1.0 3. Calculation: Test separation: 5mm Bluetooth Mode (GFSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 4.022 4±1 5 3.162 0.980 3.0 2441 4.203 4±1 5 3.162 0.988 3.0 2480 3.983 4±1 5 3.162 0.996 3.0 Bluetooth Mode (π/4-DQPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 6.529 6±1 7 5.012 1.554 3.0 2441 6.598 6±1 7 5.012 1.566 3.0 2480 6.308 6±1 7 5.012 1.579 3.0 Bluetooth Mode (8-DPSK) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dbm) Max power of tune up tolerance (mw) Calculation Value Threshold Value 2402 6.789 7±1 8 6.310 1.956 3.0 2441 6.93 7±1 8 6.310 1.972 3.0 2480 6.629 7±1 8 6.310 1.987 3.0 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06. -----END OF REPORT-----

深圳市麒鑫通达科技有限公司 SHENZHENQXTDTechnologyCo.,Ltd样品承认书 PartApprovalSheet Version：V1.0 Customer ： ShenzhenHaikangshengIntelligentCo.,Ltd Project：Bluetoothantenna PartName ： Conductingwire PartColor：Black PartNumber： SampleDeliveryDate ： April3,2021 SampleQuantity：5PCS Sampletype ： Built-inBluetoothwire ReasonforSampleDelivery：○Newtooling○Newsupplier○Toolingchange○Engineeringchange○Other: Remark ： Suppliersampleproductionconfirmation:(stamprequired) FormulateConfirmApproveQualityStamp 代庆蓉龙超群傅梁成曹光平 Customerapproval: Project confirmation ProjectapprovalQuality confirmation QualityapprovalConfirmationdate 深圳市麒鑫通达科技有限公司 SHENZHENQXTDTechnologyCo.,Ltd样品承认书 Page1 Confidentialdocuments 机密文件 1.Graphicforreference Figure20.8*20mmBT 2.OTA(FreeSpace) ChannelTRP（dBm）TIS（dBm） 06.3-91.1 396.5-91.3 786.6-91.2 NameANTENNA ModelLT13 Frequency 2.4Ghz Inputimpedance50Ω Allowedpower5mW Workingtemp.-25~+65°C Storagetemp. -40~+85°C Weight0.25g Antennagain天线 增益 -1dBi 深圳市麒鑫通达科技有限公司 SHENZHENQXTDTechnologyCo.,Ltd样品承认书 Page2 Confidentialdocuments 机密文件 3.Field 4.BTTest TesttermEnvironmentMaxpairingdistanceBTCalldistance BTOffice16-18m10-12m 深圳市麒鑫通达科技有限公司 SHENZHENQXTDTechnologyCo.,Ltd样品承认书 Page3 Confidentialdocuments 机密文件 5.Blueprint 深圳市麒鑫通达科技有限公司 SHENZHENQXTDTechnologyCo.,Ltd样品承认书 Page4 Confidentialdocuments 机密文件

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 1 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 RF Test Data for Bluetooth (Conducted Measurements) General Description of EUT Product Name: smart watch Test Model: Y11 Sample ID: HC-C-202405-0110-01-01 Environmental Conditions Temperature: 46.8°C Relative Humidity: 24.5% Test Voltage: DC 3.8V Test Engineer: Jolin Lee Note: For a more detailed features description, please refer to the report TBR-C-202405-0110-7 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 2 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 9 3. -20dB Bandwidth .............................................................................................................................................................................. 18 4. Occupied Channel Bandwidth ......................................................................................................................................................... 24 5. Band Edge ........................................................................................................................................................................................ 30 6. Band Edge(Hopping) ........................................................................................................................................................................ 37 7. Conducted RF Spurious Emission .................................................................................................................................................. 44 8. Restrict Band .................................................................................................................................................................................... 54 9. Carrier Frequencies Separation....................................................................................................................................................... 61 10. Number of Hopping Channel ......................................................................................................................................................... 64 11. Dwell Time ....................................................................................................................................................................................... 67 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 3 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 32.8 4.84 2.44 NVNT 1-DH1 2441 Ant1 32 4.95 2.5 NVNT 1-DH1 2480 Ant1 32.8 4.84 2.44 NVNT 2-DH1 2402 Ant1 32.8 4.84 2.44 NVNT 2-DH1 2441 Ant1 33.6 4.74 2.38 NVNT 2-DH1 2480 Ant1 33.6 4.74 2.38 NVNT 3-DH1 2402 Ant1 33.6 4.74 2.38 NVNT 3-DH1 2441 Ant1 33.6 4.74 2.38 NVNT 3-DH1 2480 Ant1 32.8 4.84 2.44 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 4 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 5 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 6 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 7 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 8 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202405-0110-7 Page: 9 of 72 FCC ID: 2BGZB-Y11 TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 4.022 21 Pass NVNT 1-DH1 2441 Ant1 4.203 21 Pass NVNT 1-DH1 2480 Ant1 3.983 21 Pass NVNT 1-DH3 2441 Ant1 4.384 21 Pass NVNT 1-DH5 2441 Ant1 4.371 21 Pass NVNT 2-DH1 2402 Ant1 6.529 21 Pass NVNT 2-DH1 2441 Ant1 6.598 21 Pass NVNT 2-DH1 2480 Ant1 6.308 21 Pass NVNT 2-DH3 2441 Ant1 6.687 21 Pass NVNT 2-DH5 2441 Ant1 6.663 21 Pass NVNT…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202405-0110-7 Page: 1 of 44 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2BGZB-Y11 Report No. : TBR-C-202405-0110-1 Applicant : Shenzhen Fengxingda Technoloqy Co.ltd Equipment Under Test (EUT) EUT Name : smart watch Model No. : Y11 Series Model No. : ---- Brand Name : ---- Sample ID : HC-C-202405-0110-01-01&HC-C-202405-0110-01-02 Receipt Date : 2024-05-24 Test Date : 2024-05-24 to 2024-06-06 Issue Date : 2024-06-06 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Test By : Jolin Lee Reviewed By : Henry Huang Approved By : Ivan Su This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202405-0110-7 Page: 2 of 44 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................ 2 1. GENERAL INFORMATION ABOUT EUT ............................................................................. 5 1.1 Client Information ................................................................................................................ 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode ................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility........................................................................................................................... 9 2. TEST SUMMARY..................................................................................................................... 10 3. TEST SOFTWARE .................................................................................................................. 10 4. TEST EQUIPMENT AND TEST SITE .................................................................................. 11 5. CONDUCTED EMISSION ...................................................................................................... 13 5.1 Test Standard and Limit ................................................................................................... 13 5.2 Test Setup........................................................................................................................... 13 5.3 Test Procedure .................................................................................................................. 13 5.4 Deviation From Test Standard......................................................................................... 13 5.5 EUT Operating Mode ........................................................................................................ 14 5.6 Test Data............................................................................................................................. 14 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 15 6.1 Test Standard and Limit ................................................................................................... 15 6.2 Test Setup........................................................................................................................... 16 6.3 Test Procedure .................................................................................................................. 17 6.4 Deviation From Test Standard......................................................................................... 18 6.5 EUT Operating Mode ........................................................................................................ 18 6.6 Test Data............................................................................................................................. 18 7. RESTRICTED BANDS AND BAND EDGE REQUIREMENT .......................................... 19 7.1 Test Standard and Limit ................................................................................................... 19 7.2 Test Setup........................................................................................................................... 19 7.3 Test Procedure .................................................................................................................. 20 7.4 Deviation From Test Standard......................................................................................... 20 7.5 EUT Operating Mode ........................................................................................................ 20 7.6 Test Data............................................................................................................................. 20 8. 99% OCCUPIED AND 20DB BANDWIDTH ....................................................................... 21 8.1 Test Standard and Limit ................................................................................................... 21 8.2 Test Setup............................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Conducted Emission(AC POWER) Photo of Setup for Radiated Emission (30MHz~1GHz) FCC ID: 2BGZB-Y11 TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) -----END OF REPORT-----