2BH83-IDOLMobile Phone

powerButton GetStarte IDOL speaker VoIumen+/-Button Fingerprintsensor 2.IfyouhaveadualSIMphone,placea nano-SIMcardinslot1andasecondSIMcard inslot2,memorycardinslot3withthe contactareasfacingdown. Donotremovethememorycarwhenanappisusing it.Thismightdamagethememorycard,thedevice, andcorruptdataonthecard. https://lifephone.cn/support. Maincamera Depthcamera Handsetconnector Receiver GetStarte LIFEPHONE YOURDIGITALMIND 3-FCCPrecautions ReguIatoryCompIiance ThisdevicecompIieswithpart15oftheFCC ruIes.ItsoperationissubjecttothefoIIowing conditions: 1.ThisdevicemaynotcauseharmfuI interference. 2.Thisdevicemustacceptanyinterference received,incIudinginterferencethatmay causeundesiredoperation. 4-Modifications AnychangesormodificationsnotexpressIy approvedbythepartyresponsibIefor compIiancecouIdvoidtheuser'sauthorityto operatetheequipment. 5-userInformation Thisequipmenthasbeentestedandfoundto compIywiththeIimitsforaCIassBdigitaI device,pursuanttopart15ofthe FCCID:2BH83-IDOLRuIes.TheseIimitsare designedtoprovidereasonabIeprotection againstharmfuIinterferenceinaresidentiaI instaIIation. 6-CorrectiveMeasures IfthisequipmentdoescauseharmfuI interferencetoradioorteIevisionreception, theuserisencouragedtotrytocorrectthe interferencebyoneormoreofthefoIIowing measures: -ReorientorreIocatethereceivingantenna. -Increasetheseparationbetweenthe equipmentandthereceiver. -ConnecttheequipmentintoanoutIetona circuitdiferentfromthattowhichthereceiver isconnected. -ConsuItthedeaIeroranexperienced radio/TVtechnicianfortechnicaIassistance. 7-SpecificAbsorptionRate (SAR)Information ThisceIIphonemeetsgovernment requirementsforexposuretoradiowaves.The guideIinesarebasedonstandardsdeveIoped byindependentscientificorganizationsand areperiodicaIIyevaIuated. 8-SARIimit TheUS(FCC)SARIimitis1.6W/kgaveraged overonegramoftissue.Thedevicetype:(FCC Identification:hasbeentestedagainstthis Iimit.ThehighestSARvaIuesreportedduring productcertificationare: -Useintheear:0.593W/kg -Body-woreuse:0.526W/kg 9-Bodyuse TocompIywithRFexposurerequirements,a minimumdistanceof1.0cmmustbe maintainedbetweentheuser'sbodyandthe phone,incIudingtheantenna.Theaccessories usedmustnotcontainmetaIIiccomponents. Theuseofnon-compatibIeaccessoriesmay notmeetRFexposurerequirementsand shouIdbeavoided. PoweredbyAndroid ™ AndroidisatrademarkofGoogIeLLC.

FULL TECHNOLOGY TRADE LIMITED RM13,UNIT A1,2/F.,PHASE 1, KAISER ESTATE NO.41 MAN YUE STREET, HUNGHOM, KLN HONG KONG, China Date: 2024-08-22 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d) (5) (i) Filing SUBJECT: FCC Application for FCC ID: 2BH83-IDOL To Whom It May Concern: FULL TECHNOLOGY TRADE LIMITED certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signatory [Andy Xu, head of operation in China]

FULL TECHNOLOGY TRADE LIMITED RM13,UNIT A1,2/F.,PHASE 1, KAISER ESTATE NO.41 MAN YUE STREET, HUNGHOM, KLN HONG KONG, China Date: 2024-08-22 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Ref: Attestation Statements Part 2.911(d) (5) (ii) Filing SUBJECT: FCC Application for FCC ID: 2BH83-IDOL To Whom It May Concern: FULL TECHNOLOGY TRADE LIMITED certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signatory [Andy Xu, head of operation in China]

FULL TECHNOLOGY TRADE LIMITED RM13,UNIT A1,2/F.,PHASE 1, KAISER ESTATE NO.41 MAN YUE STREET, HUNGHOM, KLN HONG KONG, China Date: 2024-08-22 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: 2BH83-IDOL Applicant FRN: 0035796937 US Agent – Attestation Statement / Part 2.911(d)(7) FULL TECHNOLOGY TRADE LIMITED certifies that, as of 2024-08-22, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BH83-IDOL. FULL TECHNOLOGY TRADE LIMITED, accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of FULL TECHNOLOGY TRADE LIMITED for FCC ID: 2BH83-IDOL. Designated Agent Information: Company Name: FCC US Agent, LLC U.S. Agent FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: FULL TECHNOLOGY TRADE LIMITED Designated Agent: FCC US Agent, LLC Company Representative: Andy Xu Designated Agent Representative: Tim Payne Signature: Signature:

FULL TECHNOLOGY TRADE LIMITED RM13,UNIT A1,2/F.,PHASE 1, KAISER ESTATE NO.41 MAN YUE STREET, HUNGHOM, KLN HONG KONG, China Date: 2024-08-22 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BH83-IDOL Confidentiality Request To whom it may concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. ☒ Block Diagram ☒ Tune-Up Information ☒ Operational Description ☒ Security Information ☒ Schematics ☐ Software Defined Radio (SDR) Information ☒ Parts List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); ☐ External Photos ☐ Test Setup Photos ☐ Internal Photos ☐ User Manual ☐ For 45 days, pursuant to Public Notice DA 04-1705. or ☐ For 180 days pursuant to KDB 726920 D01. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signatory [Andy Xu, head of operation in China]

FULL TECHNOLOGY TRADE LIMITED RM13,UNIT A1,2/F.,PHASE 1, KAISER ESTATE NO.41 MAN YUE STREET, HUNGHOM, KLN HONG KONG, China Date: 2024-08-22 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BH83-IDOL To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the Part 15 Class B Digital and receivers that operate in the range between 30 and 960 MHz of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States. According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, Signatory [Andy Xu, head of operation in China]

FULL TECHNOLOGY TRADE LIMITED RM13,UNIT A1,2/F.,PHASE 1, KAISER ESTATE NO.41 MAN YUE STREET, HUNGHOM, KLN HONG KONG, China Date: 2024-08-22 FEDERAL COMMUNICATIONS COMMISSION AUTHORIZATION AND EVALUATION DIVISION 7435 OAKLAND MILLS ROAD COLUMBIA, MD 21046 SUBJECT: FCC Application for FCC ID: 2BH83-IDOL POWER OF ATTORNEY To Whom It May Concern: We, the undersigned, hereby authorize Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Waltek Testing Group (Shenzhen) Co., Ltd. Jandy So on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. We, FULL TECHNOLOGY TRADE LIMITED are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Sincerely, Signatory [Andy Xu, head of operation in China]

Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 2 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 2 - EUT EXTERNAL PHOTOGRAPHS EUT View 1 EUT View 2 Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 3 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 3 EUT View 4 Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 4 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 5 EUT View 6 Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 5 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EUT View 7 Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 6 of 13 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn

Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 1 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn ANNEX EXHIBIT 1 - PRODUCT LABELING Proposed FCC ID Label Format Specifications: The label shall be securely affixed to a permanently attached part of the device, in a location where it is visible or easily accessible to the user, and shall not be readily detachable. The label shall be sufficiently durable to remain fully legible and intact on the device in all normal conditions of use throughout the device’s expected lifetime. Proposed Label Location on EUT FCC ID Label Location

Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 6 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn EXHIBIT 3 - EUT INTERNAL PHOTOGRAPHS EUT Housing and Board View 1 Solder Board-Component View 1 Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 7 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 2 Solder Board-Component View 3 Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 8 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 4 Solder Board-Component View 5 Reference No.: WTF24X08182130W001/002/003/004/005/006/007 Page 9 of 12 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Solder Board-Component View 6 Antenna View WIFI/BT/GPS Ant Div Ant. GSM/WCDMA /LTE Main Ant.

Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 1 of 213 TEST REPORT Reference No. .................... : WTF24X08182130W009 FCC ID ................................ : 2BH83-IDOL Applicant ........................... : FULL TECHNOLOGY TRADE LIMITED Address.............................. : RM 13,UNIT A1,2/F.,PHASE 1,KAISER ESTATE,NO.41 MAN YUE STREET,HUNGHOM,KLN HONG KONG Manufacturer ..................... FULL TECHNOLOGY TRADE LIMITED Address.............................. RM 13,UNIT A1,2/F.,PHASE 1,KAISER ESTATE,NO.41 MAN YUE STREET,HUNGHOM,KLN HONG KONG Product Name ................... : Mobile Phone Model No. ........................... : IDOL Standards .......................... : FCC Part 2.1093 IEEE Std C95.1: 2019 IEEE Std C95.3: 2002 + Rev. 2008 IEC/IEEE 62209-1528 Ed. 1.0 (2020-10) Date of Receipt sample .... : 2024-08-09 Date of Test........................ : 2024-08-09 to 2024-08-21 Date of Issue ..................... : 2024-08-23 Test Report Form No. ....... : WTX_IEEE_1528W Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver. Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected] Tested by: Approved by: Jack Sun Jason Su Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 2 of 213 TABLE OF CONTENTS 1. General Information ...................................................................................................................................................4 1.1 Product Description for Equipment Under Test (EUT) .........................................................................................4 1.2 Test Standards ....................................................................................................................................................8 1.3 Test Methodology ................................................................................................................................................8 1.4 Test Facility .........................................................................................................................................................8 2. Summary of Test Results ..........................................................................................................................................9 3. Specific Absorption Rate (SAR) .............................................................................................................................. 10 3.1 Introduction ........................................................................................................................................................ 10 3.2 SAR Definition ................................................................................................................................................... 10 4. SAR Measurement System ...................................................................................................................................... 11 4.1 The Measurement System ................................................................................................................................ 11 4.2 Probe ................................................................................................................................................................. 11 4.3 Probe Calibration Process ................................................................................................................................. 13 4.4 Phantom ............................................................................................................................................................ 14 4.5 Device Holder .................................................................................................................................................... 14 4.6 Test Equipment List ........................................................................................................................................... 15 5. Tissue Simulating Liquids ....................................................................................................................................... 16 5.1 Composition of Tissue Simulating Liquid ........................................................................................................... 16 5.2 Tissue Dielectric Parameters for Head and Body Phantoms ............................................................................. 17 5.3 Tissue Calibration Result ................................................................................................................................... 18 6. SAR Measurement Evaluation ................................................................................................................................ 19 6.1 Purpose of System Performance Check ............................................................................................................ 19 6.2 System Setup .................................................................................................................................................... 19 6.3 Validation Results .............................................................................................................................................. 20 7. EUT Testing Position ............................................................................................................................................... 22 7.1 Define Two Imaginary Lines on The Handset .........................................…

Text truncated - open the document above for the full version.

Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 165 of 213 Maximum location: X=16.00, Y=25.00 D. SAR 1g & 10g SAR 10g (W/Kg) 0.078739 SAR 1g (W/Kg) 0.150580 E. Z Axis Scan Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 0.2605 0.1676 0.1071 0.0696 0.0468 F. 3D Image 3D screen shot Hot spot position Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 166 of 213 MEASUREMENT 28/46 Type: Measurement (Complete) Date of measurement: 2024-08-11 Measurement duration: 12 minutes 3 seconds E-field Probe: SSE2 - 3823-EPGO-435; ConvF: 1.28; Calibrated: 2024-07-11 A. Experimental conditions Area Scan dx=8mm dy=8mm Zoom Scan dx=5mm dy=5mm dz=4mm Phantom Flat Plane Device Position Back Band LTE Band 5 Channels 16QAM, 10MHz, 1RB, Low Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 829.000000 Relative Permittivity (real part) 40.983245 Conductivity (S/m) 0.882458 Power Variation (%) 2.914700 Ambient Temperature 22.6 Liquid Temperature 22.6 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 167 of 213 Maximum location: X=9.00, Y=15.00 D. SAR 1g & 10g SAR 10g (W/Kg) 0.059878 SAR 1g (W/Kg) 0.104039 E. Z Axis Scan Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 0.1692 0.1126 0.0742 0.0492 0.0331 F. 3D Image 3D screen shot Hot spot position Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 168 of 213 MEASUREMENT 29/47 Type: Measurement (Complete) Date of measurement: 2024-08-19 Measurement duration: 12 minutes 3 seconds E-field Probe: SSE2 - 3823-EPGO-435; ConvF: 1.50; Calibrated: 2024-07-11 A. Experimental conditions Area Scan dx=8mm dy=8mm Zoom Scan dx=5mm dy=5mm dz=4mm Phantom Flat Plane Device Position Back Band LTE Band 7 Channels 16QAM, 20MHz, 1RB, Middle Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 2535.000000 Relative Permittivity (real part) 39.823255 Conductivity (S/m) 1.923929 Power Variation (%) 2.194700 Ambient Temperature 22.5 Liquid Temperature 22.5 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 169 of 213 Maximum location: X=22.00, Y=-1.00 D. SAR 1g & 10g SAR 10g (W/Kg) 0.125162 SAR 1g (W/Kg) 0.246512 E. Z Axis Scan Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 0.4369 0.2671 0.1557 0.0863 0.0446 F. 3D Image 3D screen shot Hot spot position Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 170 of 213 MEASUREMENT 30/48 Type: Measurement (Complete) Date of measurement: 2024-08-10 Measurement duration: 12 minutes 3 seconds E-field Probe: SSE2 - 3823-EPGO-435; ConvF: 1.27; Calibrated: 2024-07-11 A. Experimental conditions Area Scan dx=8mm dy=8mm Zoom Scan dx=5mm dy=5mm dz=4mm Phantom Flat Plane Device Position Back Band LTE Band 12 Channels 16QAM, 10MHz, 1RB, High Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 711.000000 Relative Permittivity (real part) 41.084156 Conductivity (S/m) 0.871828 Power Variation (%) 2.575100 Ambient Temperature 22.6 Liquid Temperature 22.6 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 171 of 213 Maximum location: X=8.00, Y=-48.00 D. SAR 1g & 10g SAR 10g (W/Kg) 0.172946 SAR 1g (W/Kg) 0.223809 E. Z Axis Scan Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 0.2669 0.2266 0.1915 0.1610 0.1345 F. 3D Image 3D screen shot Hot spot position Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 172 of 213 MEASUREMENT 31/49 Type: Measurement (Complete) Date of measurement: 2024-08-10 Measurement duration: 12 minutes 3 seconds E-field Probe: SSE2 - 3823-EPGO-435; ConvF: 1.27; Calibrated: 2024-07-11 A. Experimental conditions Area Scan dx=8mm dy=8mm Zoom Scan dx=5mm dy=5mm dz=4mm Phantom Flat Plane Device Position Back Band LTE Band 13 Channels QPSK, 10MHz, 1RB, Middle Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 782.000000 Relative Permittivity (real part) 41.084262 Conductivity (S/m) 0.871258 Power Variation (%) 0.361500 Ambient Temperature 22.6 Liquid Temperature 22.6 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 173 of 213 Maximum location: X=1.00, Y=-32.00 D. SAR 1g & 10g SAR 10g (W/Kg) 0.098412 SAR 1g (W/Kg) 0.129760 E. Z Axis Scan Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 0.1643 0.1342 0.1099 0.0905 0.0750 F. 3D Image 3D screen shot Hot spot position Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 174 of 213 MEASUREMENT 32/50 Type: Measurement (Complete) Date of measurement: 2024-08-10 Measurement duration: 12 minutes 3 seconds E-field Probe: SSE2 - 3823-EPGO-435; ConvF: 1.27; Calibrated: 2024-07-11 A. Experimental conditions Area Scan dx=8mm dy=8mm Zoom Scan dx=5mm dy=5mm dz=4mm Phantom Flat Plane Device Position Back Band LTE Band 17 Channels 16QAM, 10MHz, 1RB, High Signal Duty Cycle 1:1 B. SAR Measurement Results Frequency (MHz) 711.000000 Relative Permittivity (real part) 41.084156 Conductivity (S/m) 0.871828 Power Variation (%) 2.812700 Ambient Temperature 22.6 Liquid Temperature 22.6 C. SAR Surface and Volume SURFACE SAR VOLUME SAR Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd. Http://www.waltek.com.cn Page 175 of 213 Maximum location: X=3.00, Y=-22.00 D. SAR 1g & 10g SAR 10g (W/Kg) 0.168272 SAR 1g (W/Kg) 0.218689 E. Z Axis Scan Z (mm) 0.00 4.00 8.00 12.00 16.00 SAR (W/Kg) 0.2643 0.2217 0.1856 0.1555 0.1302 F. 3D Image 3D screen shot Hot spot position Reference No.: WTF24X08182130W009 Waltek Testing Group (Shenzhen) Co., Ltd.…

Text truncated - open the document above for the full version.

Page: 1/10 Ref : ACR.193.11.24.BES.B Cancel and replace the report ACR.193.11.24.BES.A WALTEK TESTING GROUP (SHENZHEN) CO., LTD 1/F., ROOM 101, BUILDING 1, HONGWEI INDUSTRIAL PARK, LIUXIAN 2ND ROAD, BLOCK 70 BAO'AN DISTRICT, SHENZHEN, GUANGDONG, 518101 CHINA MVG COMOSAR DOSIMETRIC E-FIELD PROBE SERIAL NO.: 3823-EPGO-435 Calibrated at MVG Z.I. de la pointe du diable Technopôle Brest Iroise – 295 avenue Alexis de Rochon 29280 PLOUZANE - FRANCE Calibration date: 07/11/2024 Accreditations #2-6789 Scope available on www.cofrac.fr The use of the Cofrac brand and the accreditation references is prohibited from any reproduction. Summary: This document presents the method and results from an accredited COMOSAR Dosimetric E-Field Probe calibration performed at MVG, using the CALIPROBE test bench, for use with a MVG COMOSAR system only. The test results covered by accreditation are traceable to the International System of Units (SI). COMOSAR E-Field Probe Calibration Report COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.193.11.24.BES.B Page: 2/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. Name Function Date Signature Prepared by : Pedro Ruiz Measurement Responsible 7/30/2024 Checked & approved by: Jérôme Luc Technical Manager 7/11/2024 Authorized by: Yann Toutain Laboratory Director Customer Name Distribution : WALTEK TESTING GROUP (SHENZHEN) CO., LTD Issue Name Date Modifications A Cyrille ONNEE 7/11/2024 Initial release B Pedro Ruiz 7/30/2024 Customer info update COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.193.11.24.BES.B Page: 3/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. TABLE OF CONTENTS 1 Device Under Test ..................................................................................................... 4 2 Product Description ................................................................................................... 4 2.1 General Information _______________________________________________________ 4 3 Measurement Method ................................................................................................ 4 3.1 Sensitivity _______________________________________________________________ 4 3.2 Linearity ________________________________________________________________ 5 3.3 Isotropy _________________________________________________________________ 5 3.4 Boundary Effect __________________________________________________________ 5 3.5 Probe Modulation Response _________________________________________________ 6 4 Measurement Uncertainty .......................................................................................... 6 5 Calibration Results ..................................................................................................... 6 5.1 Calibration in air __________________________________________________________ 6 5.2 Calibration in liquid _______________________________________________________ 7 6 Verification Results ................................................................................................... 8 7 List of Equipment ...................................................................................................... 9 COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.193.11.24.BES.B Page: 4/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which it is submitted and is not to be released in whole or part without written approval of MVG. 1 DEVICE UNDER TEST Device Under Test Device Type COMOSAR DOSIMETRIC E FIELD PROBE Manufacturer MVG Model SSE2 Serial Number 3823-EPGO-435 Product Condition (new / used) New Frequency Range of Probe 0.15 GHz-7.5GHz Resistance of Three Dipoles at Connector Dipole 1: R1=0.189 M Dipole 2: R2=0.212 M Dipole 3: R3=0.216 M 2 PRODUCT DESCRIPTION 2.1 GENERAL INFORMATION MVG’s COMOSAR E field Probes are built in accordance to the IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards. Figure 1 – MVG COMOSAR Dosimetric E field Probe Probe Length 330 mm Length of Individual Dipoles 2 mm Maximum external diameter 8 mm Probe Tip External Diameter 2.5 mm Distance between dipoles / probe extremity 1 mm 3 MEASUREMENT METHOD The IEC/IEEE 62209-1528 and FCC KDB865664 D01 standards provide recommended practices for the probe calibrations, including the performance characteristics of interest and methods by which to assess their effect. All calibrations / measurements performed meet the fore-mentioned standards. 3.1 SENSITIVITY The sensitivity factors of the three dipoles were determined using a two step calibration method (air and tissue simulating liquid) using waveguides as outlined in the standards for frequency range 600- 7500MHz and using the calorimeter cell method (transfer method) as outlined in the standards for frequency 150-450 MHz. COMOSAR E-FIELD PROBE CALIBRATION REPORT Ref: ACR.193.11.24.BES.B Page: 5/10 Template_ACR.DDD.N.YY.MVGB.ISSUE_COMOSAR Probe vM This document shall not be reproduced, except in full or in part, without the written approval of MVG. The information contained herein is to be used only for the purpose for which i…

Text truncated - open the document above for the full version.