2BHDCMF67MIFI4G LTE Pocket WiFi

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 1 of 4 EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 2 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 3 of 4 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 4 of 4

ICCID:89860220190911267908 Scan For Top-Up 4G LTE Pocket WiFi MF67 IMEI:866442048254640 MAC:C05B1230AD3D S/N:MF67232500001 Wi-Fi SSID:MiFi_30AD3D Wi-Fi KEY:12345678 For Travel, Home or Office Use A Product of HongKong, Made in China FCC ID: 2BHDCMF67MIFI

Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 1 of 10 EXHIBIT C - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 2 of 10 Main ANT DIV ANT Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 3 of 10 Wi-Fi ANT2 Wi-Fi ANT1 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 4 of 10 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 5 of 10 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 6 of 10 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 7 of 10 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 8 of 10 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 9 of 10 Bay Area Compliance Laboratories Corp. (Shenzhen) Project No.: SZ1240124-05544E-RF Page 10 of 10

Report No.: SZ1240124-05544E-20 Page 1 of 4 APPENDIX C EUT TEST POSITION PHOTOS Liquid depth ≥ 15cm Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 The Ruler Photo Report No.: SZ1240124-05544E-20 Page 2 of 4 Body Front Setup Photo (10mm) Body Back Setup Photo (10mm) 10mm 10mm Report No.: SZ1240124-05544E-20 Page 3 of 4 Body Left Setup Photo (10mm) Body Right Setup Photo (10mm) 10mm 10mm Report No.: SZ1240124-05544E-20 Page 4 of 4 Body Top Setup Photo (10mm) 10mm

APPENDIX E - DIPOLE CALIBRATION CERTIFICATES D750V3 - SN:1167 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss(< -20dB, within 20% of prior calibration), and in impedance(within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Justification of the extended calibration D750V3 - SN:1167 750MHz Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022/10/31 (Cal. Report) -26.709 / 52.987 / -3.7065 / 2023/10/30 (Extended) -26.572 -0.5154.922 1.935 -0.12796 3.57854 Th e return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D750V3 - SN:1167 (Date of Measurement: 2023/10/30) 750MHz - Head D835V2 - SN:453 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss(< -20dB, within 20% of prior calibration), and in impedance(within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Justification of the extended calibration D835V2 - SN:453 835MHz Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2021/8/31 (Cal. Report) -21.342 / 56.153 / -6.7227 / 2022/8/30 (Extended) -20.192 -5.3952.246 -3.91 -9.7923 -3.07 2023/8/30 (Extended) -20.110 -5.7753.060 -3.09 -9.1625 -2.44 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D835V2 - SN:453 (Date of Measurement: 2022/8/30) 835MHz - Head Dipole Verification Data> D835V2 - SN:453 (Date of Measurement: 2023/8/30) 835MHz - Head D1750V2 - SN:1141 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss(< -20dB, within 20% of prior calibration), and in impedance(within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Justification of the extended calibration D1750V2 - SN:1141 1750MHz Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2021/6/29 (Cal. Report) -31.302 / 51.639 / -2.2298 / 2022/6/28 (Extended) -26.492 -15.3754.922 3.283 -0.68052 1.54928 2023/6/28 (Extended) -28.470 -9.0553.955 2.316 -0.17559 2.05421 Th e return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D1750V2 - SN:1141 (Date of Measurement: 2022/6/28) 1750MHz - Head Dipole Verification Data> D1750V2 - SN:1141 (Date of Measurement: 2023/6/28) 1750MHz - Head D1900V2 - SN:543 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss(< -20dB, within 20% of prior calibration), and in impedance(within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Justification of the extended calibration D1900V2 - SN:543 1900MHz Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2022/11/2 (Cal. Report) -28.189 / 49 .908/3 .8 937/ 2023/11/1 (Extended) -29.552 4.84 48.632 -1.2762.9874 -0.9063 Th e return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D1900V2 - SN:543 (Date of Measurement: 2023/11/1) 1900MHz - Head D2450V2 - SN:971 Extended Dipole Calibrations Referring to KDB865664 D01, if dipoles are verified in return loss(< -20dB, within 20% of prior calibration), and in impedance(within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. Justification of the extended calibration D2450V2 - SN:971 2450MHz Head Date of Measurement Return-Loss (dB) Delta (%) Real Impedance (ohm) Delta (ohm) Imaginary Impedance (ohm) Delta (ohm) 2021/6/28 (Cal. Report) -23.577 / 55.713 / 4.0588 / 2022/6/27 (Extended) -21.691 -8 54.549 -1.1647.3301 3.2713 2023/6/27 (Extended) -21.918 -7.0454.157 -1.5567.2675 3.2087 Th e return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data> D2450V2 - SN:971 (Date of Measurement: 2022/6/27) 2450MHz - Head Dipole Verification Data> D2450V2 - SN:971 (Date of Measurement: 2023/6/27) 2450MHz - Head

APPENDIX D PROBE CALIBRATION CERTIFICATES

Report No.: SZ1240124-05544E-20 Page 1 of 54 APPENDIX B - SAR PLOTS Test Plot 1#: WCDMA Band 2_Body Front_Mid DUT: 4G LTE Pocket WiFi; Type: MF67; Serial: 2H2V-1 Communication System: WCDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.354 S/m; ε r = 39.506; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7839; ConvF(8, 7.27, 7.03) @ 1880 MHz; Calibrated: 2023/9/21 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2024/1/23 • Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.215 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 9.187 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 0.298 W/kg SAR(1 g) = 0.195 W/kg; SAR(10 g) = 0.126 W/kg Maximum value of SAR (measured) = 0.225 W/kg 0 dB = 0.225 W/kg = -6.48 dBW/kg Report No.: SZ1240124-05544E-20 Page 2 of 54 Test Plot 2#: WCDMA Band 2_Body Back_Mid DUT: 4G LTE Pocket WiFi; Type: MF67; Serial: 2H2V-1 Communication System: WCDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.354 S/m; ε r = 39.506; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7839; ConvF(8, 7.27, 7.03) @ 1880 MHz; Calibrated: 2023/9/21 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2024/1/23 • Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.531 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 13.72 V/m; Power Drift = 0.03 dB Peak SAR (extrapolated) = 0.722 W/kg SAR(1 g) = 0.465 W/kg; SAR(10 g) = 0.298 W/kg Maximum value of SAR (measured) = 0.535 W/kg 0 dB = 0.535 W/kg = -2.72 dBW/kg Report No.: SZ1240124-05544E-20 Page 3 of 54 Test Plot 3#: WCDMA Band 2_Body Left_Mid DUT: 4G LTE Pocket WiFi; Type: MF67; Serial: 2H2V-1 Communication System: WCDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.354 S/m; ε r = 39.506; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7839; ConvF(8, 7.27, 7.03) @ 1880 MHz; Calibrated: 2023/9/21 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2024/1/23 • Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.297 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 6.675 V/m; Power Drift = 0.18 dB Peak SAR (extrapolated) = 0.462 W/kg SAR(1 g) = 0.279 W/kg; SAR(10 g) = 0.160 W/kg Maximum value of SAR (measured) = 0.339 W/kg 0 dB = 0.339 W/kg = -4.70 dBW/kg Report No.: SZ1240124-05544E-20 Page 4 of 54 Test Plot 4#: WCDMA Band 2_Body Right_Mid DUT: 4G LTE Pocket WiFi; Type: MF67; Serial: 2H2V-1 Communication System: WCDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.354 S/m; ε r = 39.506; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7839; ConvF(8, 7.27, 7.03) @ 1880 MHz; Calibrated: 2023/9/21 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2024/1/23 • Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (8x11x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.0916 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 5.863 V/m; Power Drift = 0.15 dB Peak SAR (extrapolated) = 0.137 W/kg SAR(1 g) = 0.085 W/kg; SAR(10 g) = 0.052 W/kg Maximum value of SAR (measured) = 0.101 W/kg 0 dB = 0.101 W/kg = -9.96 dBW/kg Report No.: SZ1240124-05544E-20 Page 5 of 54 Test Plot 5#: WCDMA Band 2_Body Top_Mid DUT: 4G LTE Pocket WiFi; Type: MF67; Serial: 2H2V-1 Communication System: WCDMA; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.354 S/m; ε r = 39.506; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7839; ConvF(8, 7.27, 7.03) @ 1880 MHz; Calibrated: 2023/9/21 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2024/1/23 • Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 • Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12 (7470) Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.441 W/kg Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 16.52 V/m; Power Drift = -0.09 dB Peak SAR (extrapolated) = 0.754 W/kg SAR(1 g) = 0.455 W/kg; SAR(10 g) = 0.266 W/kg Maximum value of SAR (measured) = 0.550 W/kg 0 dB = 0.550 W/kg = -2.60 dBW/kg Report No.: SZ1240124-05544E-20 Page 6 of 54 Test Plot 6#: WCDMA Band 5_Body Front_Mid DUT: 4G LTE Pocket WiFi; Type: MF67; Serial: 2H2V-1 Communication System: WCDMA; Frequency: 836.6 MHz;Duty Cycle: 1:1 Medium parameters used: f = 836.6 MHz; σ = 0.872 S/m; ε r = 42.83; ρ = 1000 kg/m 3 Phantom section: Flat Section DASY5 Configuration: • Probe: EX3DV4 - SN7839; ConvF(9.55, 8.6, 8.54) @ 836.6 MHz; Calibrated: 2023/9/21 • Sensor-Surface: 1.4mm (Mechanical Surface Detection) • Electronics: DAE4 Sn772; Calibrated: 2024/1/23 • Phantom: SAM (30deg probe tilt) with CRP v5.0_20150321; Type: QD000P40CD; Serial: TP:1874 • Meas…

Text truncated - open the document above for the full version.

FCC SAR TEST REPORT Applicant: Shenzhen Zijin Technology Co., Ltd. Address: Rm 2895, Pengrunda COMM Plaza, No.3368 Hubin Rd., Yuehai St., Nanshan Dist., Shenzhen, Guangdong, China Product Name: 4G LTE Pocket WiFi FCC ID: 2BHDCMF67MIFI Standard(s): 47 CFR Part 2(2.1093) Report Number: SZ1240124-05544E-20 Report Date: 2024/4/15 The above device has been tested and found compliant with the requirement of the relative standards by Bay Area Compliance Laboratories Corp. (Dongguan). Reviewed By: Mark Dong Approved By: Brave Lu Title: SAR Engineer Title: SAR Engineer Bay Area Compliance Laboratories Corp. (Dongguan) No.12, Pulong East 1 st Road, Tangxia Town, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn Note: The information marked ▲ is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with ★.This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: SZ1240124-05544E-20 Report Template Version: FCC SAR-V1.0 Page 2 of 57 SAR TEST RESULTS SUMMARY Mode Max. Reported SAR Level(s) (W/kg) Limit (W/kg) WCDMA Band 2 1g Body SAR 0.51 1.6 WCDMA Band 5 1g Body SAR 0.16 LTE Band 2 1g Body SAR 0.91 LTE Band 4 1g Body SAR 1.08 LTE Band 12&17 1g Body SAR 0.63 Wi-Fi 2.4G 1g Body SAR 0.34 Simultaneous 1g Body SAR 1.13 1g Body SAR 1.13 (Hotspot) Applicable Standards FCC 47 CFR part 2.1093 Radiofrequency radiation exposure evaluation: portable devices IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques IEC 62209-2:2010 Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices-Human models, instrumentation, and procedures-Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) IEC 62209-2:2010/AMD1:2019 ED1 Amendment 1 - Human exposure to radio frequency fields from hand-held and body- mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) KDB procedures KDB 447498 D01 General RF Exposure Guidance v06 KDB 865664 D01 SAR Measurement 100 MHz to 6 GHz v01r04 KDB 865664 D02 RF Exposure Reporting v01r02 KDB 941225 D01 3G SAR Procedures v03r01 KDB 941225 D05 SAR for LTE Devices v02r05 KDB 941225 D06 Hotspot Mode v02r01 KDB 248227 D01 802.11 Wi-Fi SAR v02r02 Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in FCC 47 CFR part 2.1093 and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: SZ1240124-05544E-20 Report Template Version: FCC SAR-V1.0 Page 3 of 57 CONTENTS SAR TEST RESULTS SUMMARY ·································································· 2 DOCUMENT REVISION HISTORY ································································ 5 1. GENERAL INFORMATION ······································································· 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ······································ 6 2. REFERENCE, STANDARDS, AND GUIDELINES ··········································· 7 2.1 SAR LIMITS ···································································································· 7 2.2 TEST FACILITY ································································································ 8 3. DESCRIPTION OF TEST SYSTEM ······························································ 9 4. EQUIPMENT LIST AND CALIBRATION ··················································· 14 4.1 EQUIPMENTS LIST & CALIBRATION INFORMATION ················································· 14 5. SAR MEASUREMENT SYSTEM VERIFICATION ········································ 15 5.1 LIQUID VERIFICATION ····················································································· 15 5.2 LIQUID VERIFICATION RESULTS ········································································ 15 5.3 SYSTEM ACCURACY VERIFICATION ···································································· 17 5.4 SYSTEM ACCURACY CHECK RESULTS ·································································· 17 5.5 SAR SYSTEM VALIDATION DATA ································································· 18 6. EUT TEST STRATEGY AND METHODOLOGY ·········································· 23 6.1 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS ······························· 23 6.2 TEST DISTANCE FOR SAR EVALUATION ······························································· 23 6.3 SAR EVALUATION PROCEDURE ········································································· 24 7. CONDUCTED OUTPUT POWER MEASUREMENT ······································ 25 7.1 TEST PROCEDURE ···················…

Text truncated - open the document above for the full version.

Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 1 - / 16 Customer Project MF67 Date：2022/11/23 Shenzhen Xiangboyi Technology Co. Ltd Antenna Specification Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 2 - / 16 Customer confirmation Engineer PM Quality Approval Supplier confirmation ME RF Examine Approval Sample paste Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 3 - / 16 Catalogue 1 Test System and Equipment ......................................... - 4 - 2 Product Description ........................................................... - 4 - 3 Device Description ............................................................. - 5 - 4 Matching Circuits ................................................................ - 8 - 5 Test Data ............................................................................... - 9 - Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 4 - / 16 1 Test System and Equipment Test items equipment 1：S parameter 1 1 . . R R e e t t u u r r n n l l o o s s s s 2 2 . . V V S S W W R R N N e e t t w w o o r r k k a a n n a a l l y y z z e e r r : : A A 3 3 3 3 8 8 / / A A 3 3 3 3 3 3 / / H H P P 8 8 7 7 5 5 3 3 D D 2：Active test 1 1 . . T T r r a a n n s s m m i i t t t t i i n n g g p p o o w w e e r r 2 2 . . R R e e c c e e i i v v i i n n g g s s e e n n s s i i t t i i v v i i t t y y C C o o m m p p r r e e h h e e n n s s i i v v e e t t e e s s t t i i n n s s t t r r u u m m e e n n t t : : A A g g i i l l e e n n t t 8 8 9 9 6 6 0 0 / / C C M M W W 5 5 0 0 0 0 3： Radiation mode and gain 1 1 . . R R a a d d i i a a t t i i o o n n m m o o d d e e 2 2 . . G G a a i i n n 1 1 . . S S h h i i e e l l d d i i n n g g r r o o o o m m ： ： 7 7 x x 4 4 x x 3 3 m m ( ( E E T T S S - - 3 3 D D ) ) 2 2 . . N N e e t t w w o o r r k k a a n n a a l l y y z z e e r r ： ： H H P P 8 8 7 7 5 5 3 3 D D 2 Product Description Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 5 - / 16 Technical requirements Technical index Remarks Band LTE:B2/B4/B12/B17/B28 WCDMA:B1/B2/B5/B8 WIFI:2.4G Range Of Frequency LTE:698-960Mhz; 1710-2690Mhz; WIFI:2400-2500Mhz; VSWR 824-960Mhz<2.0 1710-2690Mhz<2.0 2400-2500Mhz<2.0 Center Frequency Impendance 50Ω Polarization Linear polarization operating temperature -32°C / +55°C storage temperature -55°C / +85°C Salt Fog 24h(24h alterning wet & dry) RoHS Compliant yes 3 Device Description Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 6 - / 16 Antenna photo Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 7 - / 16 DIV ANT MAIN ANT WIFI ANT 1 She T R & You s Prod Zon WI 4 enzhen Xi Tel: (+86)075 D Center: 1 song Road, duction Bas e, Tangxia To FI ANT 2 Matc angboyi T 55-29369912 101, floor 1, W Longhua Dis se:5 / F, build own, Donggu 2 ching Elemen E1(0402 E2(0402 E3(0402 E4(0402 Technolog 2 Fax: (+86)0 Wencheng b strict, Shenzh ding B, Huaz uan City. - 8 g Cir nt 2) 2) 2) 2) gy Co. Ltd 0755-616242 building, Yous hen. zhi chuanggu 8 - / 16 cuits Value NA 0Ω NA 0Ω 200 song Cultura u, No. 7, Yuh s e al Innovation ua street, 1 3 Vender Park, No. 95 38 Industrial 5, Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 9 - / 16 Original match unchanged. 5 Test Data Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural Innovation Park, No. 95, Yousong Road, Longhua District, Shenzhen. Production Base:5 / F, building B, Huazhi chuanggu, No. 7, Yuhua street, 138 Industrial Zone, Tangxia Town, Dongguan City. - 10 - / 16 Shenzhen Xiangboyi Technology Co. Ltd Tel: (+86)0755-29369912 Fax: (+86)0755-61624200 R & D Center: 101, floor 1, Wencheng building, Yousong Cultural In…

Text truncated - open the document above for the full version.

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn TR-EM-RF030 Page 1 of 62 Version 1.0 (2023/10/07) TEST REPORT Applicant Name: Shenzhen Zijin Technology Co., Ltd. Address: Rm 2895, Pengrunda COMM Plaza, No.3368 Hubin Rd., Yuehai St., Nanshan Dist., Shenzhen, Guangdong, China Report Number: SZ1240124-05544E-RF-00B FCC ID: 2BHDCMF67MIFI Test Standard (s) FCC PART 27; FCC PART 22H; FCC PART 24E Sample Description Product Type: 4G LTE Pocket WiFi Model No.: MF67 Multiple Model(s) No.: N/A Trade Mark: N/A Date Received: 2024/01/24 Issue Date: 2024/07/12 Test Result: Pass ▲ ▲ In the configuration tested, the EUT complied with the standards above. Prepared and Checked By: Approved By: April Zhang Nancy Wang RF Engineer RF Supervisor Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: SZ1240124-05544E-RF-00B TR-EM-RF030 Page 2 of 62 Version 1.0 (2023/10/07) TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 4 GENERAL INFORMATION ....................................................................................................................................... 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 5 OBJECTIVE ................................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................................. 6 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 TEST FACILITY ............................................................................................................................................................. 6 SYSTEM TEST CONFIGURATION .......................................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 7 SUPPORT CABLE DESCRIPTION .................................................................................................................................... 8 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 8 SUMMARY OF TEST RESULTS ............................................................................................................................... 9 TEST EQUIPMENT LIST ......................................................................................................................................... 10 FCC §1.1307(B) & §2.1093 - RF EXPOSURE INFORMATION ............................................................................ 12 FCC§2.1047 - MODULATION CHARACTERISTIC ............................................................................................. 13 FCC § 2.1046, § 22.913 (A) (D) & § 24.232 (C) (D) &§27.50 (C) (D) - RF OUTPUT POWER ............................. 14 APPLICABLE STANDARD ............................................................................................................................................ 14 TES…

Text truncated - open the document above for the full version.