2BHIY-IRAT1030Tablet PC

FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harm full interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR) information: This Device meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: Device has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 0mm separation distance between the user's body and the back of the device. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

CONFIDENTIALITYREQUEST forCertificationServiceinUSA FederalCommunicationCommission EquipmentAuthorizationDivision,ApplicationProcessingBranch 7435OaklandMillsRoad Columbia,MD21046 Date:<2024-8-2> PursuanttoParagraphs§0.457and0.459oftheCommission’sRules(47C.F.R.)and Section§552(b)(4)oftheFreedomofInformationAct,werequestsconfidentialityfor thefollowingproducts: FCCIDModelname 2BHIY-IRAT1030IRAT1030 Fortheproductstatedabove,werequestthatthefollowinginformationbeheld confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term ConfidentialityDays ExternalPhotos InternalPhotos BlockDiagram Schematics TestSetupPhotos User’sManual PartsList TuneUp OperationalDescriptions Thelong-termconfidentialityexhibitscontainourtradesecretsandproprietary informationthatcouldbeofbenefittoourcompetitors. Theshort-termconfidentialityonthebasisofensuringthatbusinesssensitive informationremainsconfidentialuntiltheactualmarketingofournewdevice. Ifyouhaveanyquestions,pleasefeelfreetocontactmeattheaddressshownbelow. Sincerely, Name/Title： CharanjeetSinghArora/BusinessHead Company: WishtelPvtLtd Address: 4,ChampaklalIndustrailEstate,SionEast,Mumbai,MH-400022 Phone: +919930312790 E-Mail: [email protected]

FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT

FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Appendix IID Label Tablet PC FCC ID:2BHIY-IRAT1030 Model: IRA T1030 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Appendix II ID Label Location

FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 9 Internal of EUT Photo 10 Internal of EUT FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Photo 11 Internal of EUT Photo 12 Appearance of PCB 2G/3G/4G Antenna Bluetooth/Wi-Fi Antenna FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Photo 13 Appearance of PCB

中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 证 书 CALIBRATION CERTIFICATE 证 书 编 号 : Certificate No. S423066282 第 1 页 共 6 页 Page of 客 户 信 息 Customer Information 客户名称: Name 信恒检测技术（深圳）有限公司 客户地址: Address 深圳市宝安区松岗街道潭头社区潭头工业城二区1栋厂房101.201.3 01 被 校 测 量 器 具 信 息 Information of Instrument under Calibration 仪器名称: Description 同轴机械校准件 型号规格: Model/Type 50Ω 35mm 9G 制造厂商: Manufacturer 南京普纳科技设备有限公司 出厂编号: Serial No. / 管理编号: Asset No. BTF-EM-068 接收日期: Received Date 2023/11/16 接收状态: As Received 正常 结 论: Conclusion 参照检测/校准结果使用。 The test or calibration results are referred to evaluate the validity of instrum ent measurement. 扫一扫查真伪 证书有效性声明： 1、证书首页盖有证书章 2、证书须有唯一防伪码 3、扫描信息与证书一致 校准日期: 2023 / 11 / 16 校准: Cal.DateCalibrated by 签发日期: 2023 / 11 / 17 核验: Issue DateInspected by 建议复校日期: 2024 / 11 / 15 签发: Next Cal. DateApproved by ( 总经理助理 ) 地址：深圳市光明区玉塘街道田寮社区同仁路盛荟红星创智广场网址(Web)：http://www.ccic-mts.com Addr：ShengHui Hongxing Chuangzhi Square, Tongren Road, Tianliao 电话(Tel)：0755-86139118 Community, Yutang Street, Guangming District, Shenzhen传真(Fax)：0755-86139110 邮政编码(Post No.)：518107邮箱(e-mail): [email protected] 证书专用章 Issued by 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 说 明 CALIBRATION DIRECTIONS 证 书 编 号 : Certificate No. S423066282 第 2 页 共 6 页 Page of 1. 本公司实验室经中国合格评定国家认可委员会审核，符合ISO/IEC17025《检测和校准实验室能力的通用要求》的要求，认可 证书号：No.L3103。 This laboratory is accredited to ISO/IEC 17025《Requirements for the competence of Testing and Calibration Laboratories》,CNAS Accreditation Certificate No.L3103. 2．对本次校准若有异议，委托方应于收到被校件之日起十五日内向本公司提出。 If there is any objection concerning the calibration, the Client should inform the issuing company within 15 days from the date of the device under test return to the client. 3. 未经本公司许可，不得部分复印、摘用或篡改本证书的内容。 This report may not be reproduced, except in full, without the written approval of CCIC (ShenZhen) Metrology & Testing Service Co.,Ltd. 4. 本证书校准结果只与被校准仪器有关，带'*'号的校准项目或参数不在本公司实验室认可范围内。 The results reported here in apply only to the calibrated equipment，Calibration items or parameter with '* ' is beyond the scope of our laboratory acc reditation. 5. 本次校准的技术依据: Procedures for the Calibration: 参照JJG(电子)306001-2006《射频同轴阻抗标准器检定规程》 V.R. of RF Coaxial Impedance standard 参照 JZM 35118J-2017《微波元器件校准方法》 Microwave components calibration method 6. 本次校准所使用的主要标准器具： Standards Used in the Calibration: 器具名称 Instrument Description 编 号 Asset No. 证书编号 Certificate No. 有效期 Due Date 计量特性 Metrological Characteristic 溯源机构 Traceability institutions 网络分析仪/Vector Network Analyzer CCIC-WX-1024JL23155571512024/03/13 Sij模值:U=0.12dB;Sij相 位:U=0.9°;VSWR:U=0.0 30;(k=2) 深圳计量院 N型校准套件/Type- N Calibration Kit CCIC-WX-1006 GFJGJL1002220078 220 2025/04/28 Reflection:U=0.02(k= 2);Phase:U=1°(k=2); 二○三所 7.校准地点和环境条件： Place and environmental conditions: 地 点： 客户现场 实验室温 度： ( 23.5 ～ 24.5 )°C 相对湿度： ( 58 ～ 68 )% Place of Calibration TemperatureRelative Humidity 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 3 页 共 6 页 Page of 1、 外观及正常性检查： Check on Appearance and Function： 2、 50Ω负载驻波比 50Ω load VSWR ± ± ± ± ± ± ± ± ± ± ± ± ± ± 3、 开路反射 Open circuit reflex ± ± ± ± 频率实测值允许误差 正常 Pass 结论 Conclusion （MHz）/（Ω）（P/F） FrequencyMeasuredMPE P 501.0030.00P 101.0040.00 P 2001.0050.00P 1001.0050.00 P 10001.0090.00P 5001.0060.00 P 30001.0170.00P 20001.0120.00 P 50001.0230.00P 40001.0210.00 P 70001.0180.00P 60001.0210.00 P 90001.0170.00P 80001.0150.00 结论 FrequencyMeasuredMPEConclusion 频率实测值允许误差 （P/F） 101.0000.00P （MHz）/（Ω） P 1001.0000.00P 501.0000.00 P2001.0000.00 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 4 页 共 6 页 Page of ± ± ± ± ± ± ± ± ± ± 4、 开路相位 Open phase ± ± ± ± ± ± ± ± ± ± ± ± ± ± 5、 短路反射 5001.0000.00P P 20000.9990.00P 10001.0000.00 P 40000.9960.00P 30000.9980.00 P 60000.9920.00P 50000.9940.00 P 80000.9880.00P 70000.9890.00 P 频率实测值允许误差结论 90000.9870.00 10-0.231.0P 50-1.111.0F FrequencyMeasuredMPEConclusion （MHz）（°）（°）（P/F） 500-11.101.0F 1000-22.271.0F 100-2.221.0F 200-4.431.0F 4000-89.401.0F 5000-111.921.0F 2000-44.381.0F 3000-66.991.0F 8000179.051.0F 9000155.911.0F 6000-134.791.0F 7000-157.971.0F 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 5 页 共 6 页 Page of Short circuit reflex ± ± ± ± ± ± ± ± ± ± ± ± ± ± 6、 短路相位 Short phase ± ± ± ± ± ± ± 结论 FrequencyMeasuredMPEConclusion 频率实测值允许误差 （P/F） 100.9990.00P （MHz）/（Ω） P 1000.9970.00P 500.9990.00 P 5000.9950.00P 2000.9970.00 P 20000.9880.00P 10000.9900.00 P 40000.9880.00P 30000.9870.00 P 60000.9890.00P 50000.9870.00 P 80000.9910.00P 70000.9910.00 P 频率实测值允许误差结论 90000.9920.00 10179.721.0F 50178.711.0F FrequencyMeasuredMPEConclusion （MHz）（°）（°）（P/F） 500167.821.0F 1000155.881.0F 100177.461.0F 200175.001.0F 2000132.231.0F 中 国 检 验 认 证 集 团 CHINA CERTIFICATION & INSPECTION GROUP 中 检 （ 深 圳 ） 计 量 测 试 服 务 有 限 公 司 CCIC (Shenzhen) Metrology & Testing Service Co.,Ltd 中国认可 国际互认 校准 CALIBRATION CNAS L3103 校 准 结 果 CALIBRATION RESULT 证 书 编 号 : Certificate No. S423066282 第 6 页 共 6 页 Page of ± ± ± ± ± ± ± 说明(Notes) 1、本次校准的测量不确定度 Measurement Uncertainty in Calibration 1.1 依据JJF 1059.1-2012 测量不确定度评定与表示 Conform JJF 1059.1-2012 Evaluation and Expression of Uncertainty in Measurement. 1.2 本次测量结果的扩展不确定度（k=2） The Expanded Uncertainty of the Measurement Results 400089.781.0F 500062.691.0F 3000108.781.0F 80…

Text truncated - open the document above for the full version.

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 102 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:WishtelPvtLtd Address: 4,ChampaklalIndustrailEstate,SionEast,Mumbai,MH- 400022 EUTName:TabletPC BrandName: ModelNumber:IRAT1030 IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF240723R00501 TestStandards: FCC47CFR§2.1093IEC/IEEE62209-1528:2020 IEEEC95.1-2019KDB447498D04KDB865664D01 KDB865664D02KDB941225D01KDB941225D05 KDB248227D01KDB941225D06KDB648474D04 KDB690783D01 FCCID:2BHIY-IRAT1030 TestConclusion:Pass TestDate:2024-08-29to2024-08-07 DateofIssue:2024-08-08 PreparedBy: ZoeyZhang/TestEngineer PreparedBy: AmendaZhong/ProjectEngineer Date:2024-08-08 ApprovedBy: Ryan.CJ/EMCManager Date:2024-08-08 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF240723R00501 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 102 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02024-08-08Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF240723R00501 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 102 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction...................................................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.....................................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..............................................................................................................................4 1.3LaboratoryCondition...........................................................................................................................................................................4 1.4Announcement....................................................................................................................................................................................4 2.ProductInformation.......................................................................................................................................................................................5 2.1ApplicationInformation........................................................................................................................................................................5 2.2ManufacturerInformation....................................................................................................................................................................5 2.3FactoryInformation.............................................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).........................................................................................................................5 2.5EquipmentunderTestAncillaryEquipment........................................................................................................................................5 2.6TechnicalInformation..........................................................................................................................................................................5 3.SummaryofTestResults..............................................................................................................................................................................7 3.1TestStandards....................................................................................................................................................................................7 3.2DeviceCategoryandSARLimit..........................................................................................................................................................7 3.3TestResultSummary..........................................................................................................................................................................8 3.4TestUncertainty..................................................................................................................................................................................9 4.MeasurementSystem.................................................................................................................................................................................11 4.1SpecificAbsorptionRate(SAR)Definition........................................................................................................................................11 4.2MVGSARSystem.............................................................................................................................................................................11 5.SystemVerification...........................................................................…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 1 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 RF Test Data for 5G Wi-Fi (Conducted Measurements) General Description of EUT Product Name: Tablet PC Test Model: IRA T1030 Sample ID: HC-C-202406-0309-01-02 Environmental Conditions Temperature: 22.0°C-25°C Relative Humidity: 43%-55% Test Voltage: DC 3.8V Test Engineer: Mike Yan Note: For a more detailed features description, please refer to the report TBR-C-202406-0309-23 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 2 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 Contents 1. Emission Bandwidth....................................................................................................................................... 3 1.1.Test Result ......................................................................................................................................... 3 2.1.Test Graphs ....................................................................................................................................... 5 2. Occupied channel bandwidth ...................................................................................................................... 25 2.1.Test Result ....................................................................................................................................... 25 2.2.Test Graphs ..................................................................................................................................... 27 3. Min emission bandwidth ............................................................................................................................. 47 3.1.Test Result ....................................................................................................................................... 47 3.2.Test Graphs ..................................................................................................................................... 48 4. Maximum conducted output power ............................................................................................................ 53 4.1.Test Result ....................................................................................................................................... 53 5. Maximum power spectral density ............................................................................................................... 55 5.1.Test Result ....................................................................................................................................... 55 5.2.Test Graphs ..................................................................................................................................... 57 6. Band edge measurements ........................................................................................................................... 77 6.1.Test Result ....................................................................................................................................... 77 6.2.Test Graphs ..................................................................................................................................... 79 7. Emissions in Restricted Bands ...................................................................................................................... 92 7.1.Test Result ....................................................................................................................................... 92 7.2.Test Graphs ..................................................................................................................................... 97 8. Conducted Spurious Emission .................................................................................................................... 118 8.1.Test Result ..................................................................................................................................... 118 8.2.Test Graphs ................................................................................................................................... 121 9. Frequency Stability .................................................................................................................................... 161 9.1.Test Result ..................................................................................................................................... 161 10. Duty Cycle ................................................................................................................................................ 166 10.1.Test Result ................................................................................................................................... 166 10.2.Test Graphs ................................................................................................................................. 168 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 3 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 1. Emission Bandwidth 1.1.Test Result TestMode Antenna Channel 26db EBW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11A Ant1 5180 24.28 5167.68 5191.96 --- --- 5200 22.52 5188.76 5211.28 --- --- 5240 22.32 5229.76 5252.08 --- --- 5260 22.80 5249.80 5272.60 --- --- 5280 22.80 5267.56 5290.36 --- --- 5320 22.76 5309.84 5332.60 --- --- 5500 26.28 5487.08 5513.36 --- --- 5580 23.68 5567.04 5590.72 --- --- 5700 32.36 5685.84 5718.20 --- --- 5745 26.40 5732.04 5758.44 --- --- 5785 27.24 5772.56 5799.80 --- --- 5825 23.84 5814.80 5838.64 -…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 70 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11AC20SISO_Ant1_5500 11AC20SISO_Ant1_5580 11AC20SISO_Ant1_5700 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 71 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11AC20SISO_Ant1_5745 11AC20SISO_Ant1_5785 11AC20SISO_Ant1_5825 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 72 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11AC40SISO_Ant1_5190 11AC40SISO_Ant1_5230 11AC40SISO_Ant1_5270 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 73 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11AC40SISO_Ant1_5310 11AC40SISO_Ant1_5510 11AC40SISO_Ant1_5550 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 74 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11AC40SISO_Ant1_5670 11AC40SISO_Ant1_5755 11AC40SISO_Ant1_5795 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 75 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11AC80SISO_Ant1_5210 11AC80SISO_Ant1_5290 11AC80SISO_Ant1_5530 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 76 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11AC80SISO_Ant1_5610 11AC80SISO_Ant1_5775 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 77 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 6. Band edge measurements 6.1.Test Result TestMode Antenna ChName Channel Result[dBm] Limit[dBm] Verdict 11A Ant1 Low 5180 -28.91 ≤-27 PASS High 5320 -32.32 ≤-27 PASS Low 5500 -30.53 ≤-27 PASS High 5700 -31.18 ≤-27 PASS 11N20SISO Ant1 Low 5180 -29.74 ≤-27 PASS High 5320 -29.59 ≤-27 PASS Low 5500 -32.58 ≤-27 PASS High 5700 -29.65 ≤-27 PASS 11N40SISO Ant1 Low 5190 -29.88 ≤-27 PASS High 5310 -29.58 ≤-27 PASS Low 5510 -33.36 ≤-27 PASS High 5670 -31.19 ≤-27 PASS 11AC20SISO Ant1 Low 5180 -30.02 ≤-27 PASS High 5320 -32.25 ≤-27 PASS Low 5500 -32.52 ≤-27 PASS High 5700 -29.62 ≤-27 PASS 11AC40SISO Ant1 Low 5190 -29.44 ≤-27 PASS High 5310 -28.89 ≤-27 PASS Low 5510 -34.73 ≤-27 PASS High 5670 -32.47 ≤-27 PASS 11AC80SISO Ant1 Low 5210 -30.2 ≤-27 PASS High 5290 -32.71 ≤-27 PASS Low 5530 -32.94 ≤-27 PASS High 5610 -35.11 ≤-27 PASS TestMode Antenna ChName Channel FreqRange [MHz] Result [dBm] Limit [dBm] Verdict 11A Ant1 Low 5745 5650~5700 -43.09 ≤9.38 PASS 5700~5720 -23.52 ≤15.46 PASS 5720~5725 -19.83 ≤24.72 PASS 5760~5650 -47.82 ≤-27 PASS High 5825 5850~5855 -27.87 ≤17.58 PASS 5855~5875 -34.06 ≤10.05 PASS 5875~5925 -45.39 ≤-13.44 PASS 5925~5935 -46.99 ≤-27 PASS 11N20SISO Ant1 Low 5745 5650~5700 -34.37 ≤8.27 PASS 5700~5720 -24.51 ≤15.60 PASS 5720~5725 -15.07 ≤27.00 PASS 5760~5650 -47.09 ≤-27 PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 78 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 High 5825 5850~5855 -25.78 ≤16.69 PASS 5855~5875 -33.08 ≤10.43 PASS 5875~5925 -44.71 ≤-26.61 PASS 5925~5935 -46.75 ≤-27 PASS 11N40SISO Ant1 Low 5755 5650~5700 -31.6 ≤7.67 PASS 5700~5720 -19.67 ≤15.58 PASS 5720~5725 -19.35 ≤26.60 PASS 5780~5650 -46.85 ≤-27 PASS High 5795 5850~5855 -33.83 ≤16.39 PASS 5855~5875 -36.51 ≤11.51 PASS 5875~5925 -42.69 ≤-26.84 PASS 5925~5935 -47.26 ≤-27 PASS 11AC20SIS O Ant1 Low 5745 5650~5700 -39.79 ≤8.40 PASS 5700~5720 -24.89 ≤15.60 PASS 5720~5725 -20.07 ≤27.00 PASS 5760~5650 -47.93 ≤-27 PASS High 5825 5850~5855 -23.8 ≤15.80 PASS 5855~5875 -30.11 ≤10.05 PASS 5875~5925 -43.69 ≤-19.66 PASS 5925~5935 -45.99 ≤-27 PASS 11AC40SIS O Ant1 Low 5755 5650~5700 -31.4 ≤3.76 PASS 5700~5720 -22.08 ≤14.98 PASS 5720~5725 -20.83 ≤23.93 PASS 5780~5650 -45.68 ≤-27 PASS High 5795 5850~5855 -33.28 ≤26.21 PASS 5855~5875 -33.93 ≤10.04 PASS 5875~5925 -43.19 ≤-21.18 PASS 5925~5935 -47.29 ≤-27 PASS 11AC80SIS O Ant1 Low 5775 5650~5700 -25.83 ≤7.20 PASS 5700~5720 -22.29 ≤15.48 PASS 5720~5725 -22.11 ≤25.91 PASS 5800~5650 -34.21 ≤-27 PASS High 5775 5850~5855 -20.15 ≤15.62 PASS 5855~5875 -23.3 ≤11.76 PASS 5875~5925 -28.14 ≤-24.86 PASS 5925~5935 -35.94 ≤-27 PASS Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 79 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 6.2.Test Graphs 11A_Ant1_Low_5180 11A_Ant1_High_5320 11A_Ant1_Low_5500 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 80 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11A_Ant1_High_5700 11N20SISO_Ant1_Low_5180 11N20SISO_Ant1_High_5320 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzh…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 127 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11A_Ant1_5745_1000~40000 11A_Ant1_5785_30~1000 11A_Ant1_5785_1000~40000 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 128 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11A_Ant1_5825_30~1000 11A_Ant1_5825_1000~40000 11N20SISO_Ant1_5180_30~1000 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202406-0309-23 Page: 129 of 187 FCC ID:2BHIY-IRAT1030 TB-RF-074-1.0 11N20SISO_Ant1_5180_1000~40000 11N20SISO_Ant1_5200_30~1000 11N20SISO_Ant1_5200_1000~40000 Shenzhen Toby T…

Text truncated - open the document above for the full version.