2BHVQ-SODASoda Mechanical Keyboard

QUICK START GUIDE 入门指南 Data cable, charging cable / 数据线、充电线 名称：DK710S说明书 料号：42DK710S001 材质：120g哑粉纸 尺寸：130x80mm 页数：16页(8折页） 印刷：4c Product introduction / 产品介绍 充电 / 数据端口 Charging/data port Mode switch / 模式切换Power switch / 电源开关 Instructions for the top cover / 上盖使用说明 Basic specifications / 基本参数 Warning / 警告 Magnetic suction 磁吸式 Improve the portable 提升便携 Dustproof 防尘 Collision avoidance 防撞 键盘和手托 (上盖)对齐放平，按住手托推向键盘，直至卡扣与键盘卡槽相扣。 The keyboard and the hand rest (top cover) are aligned and lay flat, press the hand rest and push it towards the keyboard until the buckle is locked with the keyboard slot. 键盘放平, 手托倾斜30°左右对准键盘卡槽, 压住手托再放平直至卡扣与键盘卡槽相扣。 Place the keyboard flat, tilt the hand rest about 30° to align with the keyboard slot, hold the hand rest and then lay it flat until the buckle is locked with the keyboard slot. 2.4G connection / 2.4G连接 Cable connection / 有线连接 Low battery and charging instructions / 低电量及充电说明 FN combination function keys / FN组合功能键 Volume + 音量加 Volume - 音量减 Backlight color switch 背光颜色切换 Backlight mode switch 背光模式切换 Backlight changes slow down 背光变化减速 Reduce the backlight brightness 降低背光亮度 Increase the backlight brightness 增加背光亮度 Backlight changes accelerated 背光变化加速 Play/Pause 播放/暂停 Prev song 上一曲 Next song 下一曲 Mute 静音 2.4G Dual end receiver 2.4G 双头接收器 USB/Type-C ①②③ ①② ④ 长按3S恢复出厂默认 Long press 3S to restore factory default Win / Mac 系统切换 Switching between the Win and Mac systems 长按3秒启动蓝牙设备1对码，短按切换到蓝牙设备1。 长按3秒启动蓝牙设备2对码，短按切换到蓝牙设备2。 长按3秒启动蓝牙设备3对码，短按切换到蓝牙设备3。 Long press 3S to start Bluetooth device 1 pairing, short press to switch to Bluetooth device 1. Long press 3S to start Bluetooth device 2 pairing, short press to switch to Bluetooth device 2. Long press 3S to start Bluetooth device 3 pairing, short press to switch to Bluetooth device 3. Mouse right key 鼠标右键 Mouse left key 鼠标左键 Move the cursor to the left 光标向左移动 Move the cursor to the right 光标向右移动 Move the cursor up 光标向上移动 Move the cursor down 光标向下移动 The scroll wheel scroll down 滚轮向下滚动 The scroll wheel scroll Up 滚轮向上滚动 Mobile phone holder 手机支架 Methods ① / 方法 ①Methods ② / 方法 ② ■ Assembly method / 安装方法 ■ Comfortable hand rest / 舒适的手托 If liquid enters the product,please disconnect it from the computer and remove the product immediately . Continuing to use may cause fire or electric shock, please contact the agent for inspection and maintenance in time. The product shell should be checked regularly for damage. Maintenance operations are not within the scope of product compliance requirements. / 如有液体进入本产品, 请立即断开与电脑连接并移开本产品。继续使用可能会引起起火或触电, 请 及时联系代理商检查维修。应定期检查产品外壳有无损伤, 维护操作不属于产品合规性要求的范围。 Disassembly, replacement of parts, modification, and transformation of this product without express approval will cause the user to lose the right to operate this equipment and invalidate the product warranty. / 未经明确批准而对本产品进行拆卸、更换零件、改装、改造都将导致用户丧失操作本设备的权利和产 品保修失效。 Keycap material / 键帽材质：PBT Keyboard type / 键盘类型：Three-mode mechanical keyboard / 三模机械键盘 Switch / 开关：Custom kailh box switch v2 / 客制凯华BOX v2轴 Switch life / 开关寿命：100 Million Cycles / 1亿次 Function / 按键功能：FN combination function key / FN组合功能键 Attended mode / 连接方式：Bluetooth、2.4G、Wired / 蓝牙、2.4G、有线 Input voltage current / 输入电压电流：5V / 500mA Transmission distance / 传输距离：10m Battery capacity / 电池容量：2900mah Weight / 产品重量：1008g Size / 产品尺寸：313 x 104 x 50 mm Report Rate / 回报率：1000Hz ( Wired mode / 有线模式 ) Backlight / 背光：RGB Key layout / 按键布局：68 key / 68键 Supporting / 适用系统：Windows all / Mac OS / Android Cable Material / 线材材质：USB Cable braided wire / USB Cable 编织线 The name and content of the hazardous substance in the product / 产品中有害物质的名称及含量 In wireless mode, if the charging indicator " " blinks when the battery is low, please connect the USB cable for charging.When the data cable is connected to the computer will be automatically charged, charging indicator " " flashes, fully charged after the indicator off. / 在无线模式使用时，如果电池电量 不足时充电指示灯” “ 闪烁，请接入USB数据线进行充电。当数据线连接电脑后将自动充电，充电时指示 灯 ” “ 闪烁，充满电后指示灯灭。 Hazardous substances (Hg)(Cd)(Cr(VI))(PBB)(PBDE) Component name keyboard body Metal case Plastic keys This form has been prepared in accordance with the requirements of SJ/T 11364. O : Indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T 26572. X : Indicates that the hazardous substance is contained in at least one homogeneous material of the component. The quantity exceeds the limit specified in GB/T 26572. (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 铅 (Pb) 有害物质 部件名称 键盘主体 金属外壳 塑料按键 本表格依据 SJ/T 11364 的规定编制。 O : 表示该有害物质在该部件所有均质材料中 的含量均在GB/T 26572规定的限量要求以下。 X : 表示该有害物质至少在该部件的某一均质 材料中的含量超出 GB/T 26572 规定的限量要求。 Win lock Win 锁 Hexgears（ DONGGUAN ) Intelligent Technology Co.LTD. 黑峡谷 ( 东莞 ) 智能科技有限公司 Building 9, Ruiying International Hi-Tech Innovation Park No.9 Daxue RD, Songshan Lake, Dongguan, Guangdong, China. 523808 广东省东莞市松山湖大学路9号瑞鹰国际科技创新园9号楼 http://hexgears.store / www.hexgears.com / www.hyeku.com FN Key / FN 键 ：Low battery and charging / 低电量及充电 ：Caps lock / 大写锁定 ：Bluetooth / 蓝牙 ：2.4G FN combination function keys / FN组合功能键 ：Indicator light / 指示灯 : See the following page for detailed functions / 功能详细见后页 With Bluetooth +2.4G+ wired three connection modes, RGB backlight, Win/Mac system switching, mouse functions and so on / 具有蓝牙+2.4G+有线三种连接模式、RGB背光、Win / Mac 系统切换、鼠标功能等 FN+ESC= ；FN+1=F1；FN+2=F2；FN+3=F3 ；...... ③ Bluetooth connection / 蓝牙连接 Add bluetooth/添加蓝牙 HyeKu KB1 HyeKu BT 3.0 KB Select one of them and Long press for 3S to enable the device matching code / 选其一，长按3S启动设备对码 Your equipment is ready / 你的设备已 准备就绪 HyeKu KB1 The connected 已连接 Has been completed 已完成 Bluetooth/蓝牙 ON/开 Add bluetooth/添加蓝牙 ①②③ ④⑤⑥ Device name / 设备名称： (5.0)HyeKu KB1 / HyeKu BT 3.0 KB (5.0)HyeKu KB2 / HyeKu BT 3.0 KB (5.0)HyeKu KB3 / HyeKu BT 3.0 KB 封面 封底 FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any in…

Text truncated - open the document above for the full version.

Hexgears (Shenzhen) Technology Co.,Ltd U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: UUX GROUP INC FRN: 0033701590 Contact Name: Jack Fu Address: 36 South 18th Avenue, Suite A, Brighton, CO 80601, USA Telephone No: (213) 375-3998 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:Jack Fu Date:2024/9/20 Signed by (Printed Name/Title): Jack Fu/Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Hexgears (Shenzhen) Technology Co.,Ltd Grantee Code: 2BHVQ FCC ID: 2BHVQ-SODA FRN: 0035728724 Contact Name: XiangQu Hu Address: No. 1407, 14th Floor, Building 4, Excellence Meilin Center Plaza (North), Zhongkang Road, Meilin Street, Futian District, Shenzhen, China Email: [email protected] Applicant Signature: XiangQu Hu Date: 2024.09.19 Signed by (Printed Name/Title): XiangQu Hu / Manager

Hexgears (Shenzhen) Technology Co.,Ltd 2024.09.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BHVQ-SODA [Hexgears (Shenzhen) Technology Co.,Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) XiangQu Hu (Applicant printed name) XiangQu Hu Hexgears (Shenzhen) Technology Co.,Ltd 2024.09.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BHVQ-SODA [Hexgears (Shenzhen) Technology Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) XiangQu Hu (Applicant printed name) XiangQu Hu

Hexgears (Shenzhen) Technology Co.,Ltd 2024.09.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: XiangQu Hu Client’s name / title : XiangQu Hu /Manager Contact information / address: No. 1407, 14th Floor, Building 4, Excellence Meilin Center Plaza (North), Zhongkang Road, Meilin Street, Futian District, Shenzhen, China Product Name: Soda Mechanical Keyboard Trademark: Model/Type reference: Soda KSODARD68T20206E, KSODAGN68T20206E, KSODAOE68T20206E, KSODARD68L20206E, KSODAGN68L20206E, KSODAOE68L20206E, KSODARD68C20206E, KSODAGN68C20206E, KSODAOE68C20206E FCC ID: 2BHVQ-SODA

Hexgears (Shenzhen) Technology Co.,Ltd 2024.09.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: XiangQu Hu Client’s name / title : XiangQu Hu /Manager Contact information / address: No. 1407, 14th Floor, Building 4, Excellence Meilin Center Plaza (North), Zhongkang Road, Meilin Street, Futian District, Shenzhen, China

Hexgears (Shenzhen) Technology Co.,Ltd Model Difference 2024.09.21 Product Name:Soda Mechanical Keyboard Trademark: Model/Type reference: Soda KSODARD68T20206E, KSODAGN68T20206E, KSODAOE68T20206E, KSODARD68L20206E, KSODAGN68L20206E, KSODAOE68L20206E, KSODARD68C20206E, KSODAGN68C20206E, KSODAOE68C20206E All the model are the same circuit and RF module, except appearance color and model name. Regards Sincerely Client’s signature: XiangQu Hu Client’s name / title : XiangQu Hu /Manager Contact information / address: No. 1407, 14th Floor, Building 4, Excellence Meilin Center Plaza (North), Zhongkang Road, Meilin Street, Futian District, Shenzhen, China

External Photos

Size:10*5mm FCC ID:2BHVQ-SODA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Label location

Internal Photos Antenna

Shenzhen BCTC Testing Co., Ltd. FCC ID:2BHVQ-SODA Portable device According to §15.247(e)(i) and §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to KDB447498 D01 General RF Exposure Guidance V06 The 1-g SAR and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHZ)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f(GHZ) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. BT: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion GFSK 2.402 -14.99 0.03 -14±1 -13.00 0.05 <5 0.01554 3.00 YES 2.441 -13.69 0.04 -13±1 -12.00 0.06 <5 0.01972 3.00 YES 2.480 -14.03 0.04 -14±1 -14.00 0.04 <5 0.01254 3.00 YES SRD 2.4G: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion GFSK 2402 -0.82 0.83 0±1 1.00 1.26 <5 0.39023 3.00 YES 2446 -0.71 0.85 0±1 1.00 1.26 <5 0.39378 3.00 YES 2479 -1.18 0.76 -1±1 0.00 1.00 <5 0.31490 3.00 YES BLE: Modulation Channel Freq. (GHz) Conduct ed power (dBm) Conducte d power (mW) Tune-up power (dBm) Max tune-up power (dBm) Max tune-up power (mW) Distance (mm) Result calculatio n SAR Exclusion threshold SAR test exclusion GFSK 1Mbps 2.402 -16.06 0.02 -16±1 -15.00 0.03 <5 0.00980 3.00 YES 2.44 -13.75 0.04 -13±1 -12.00 0.06 <5 0.01971 3.00 YES 2.480 -11.72 0.07 -11±1 -10.00 0.10 <5 0.03150 3.00 YES Conclusion: For the max result : 0.39378 W/Kg ≤ FCC Limit 3.0 for 1g SAR. The Product unsupported at the same time to Transmitting.

深圳祥博一科技有限公司 ShenzhenXiangboyiTechnology Co,.Ltd ❖天线测试报告 Antenna Test Report 客户案号/ Customer No. :蓝色PCB键盘 日期/Date： 2021年12月6日 项目负责人:郭子俊 Antenna sizeunit：mm Antenna efficiency： Passive Test For 2.4G FreqEffiEffiGainGainUHISDHISMaxMinAttenutAttenut (MHz)(%)(dB)(dBi)(dBd)(%)(%)(dB)(dB)HorVer 240035.63-4.480.58-1.5718.11117.5160.58-13.4452.0452.1 241035.09-4.550.54-1.6117.83317.2610.54-14.3252.4652.46 242038.23-4.180.92-1.2319.42918.7960.92-14.6352.0852.29 243030.16-5.21-0.02-2.1715.3714.787-0.02-15.6850.3250.23 244042.58-3.711.58-0.5721.6420.941.58-14.0251.4551.43 245030.98-5.090.36-1.7915.60515.3790.36-15.7850.2350.3 246035.38-4.511.12-1.0317.67117.7121.12-15.3351.4251.44 247024.98-6.02-0.21-2.3612.27512.703-0.21-17.9751.0851 248031.92-4.960.9-1.2515.5416.3840.9-17.8251.4251.44 249022.83-6.41-0.43-2.5810.92511.91-0.43-21.0651.0650.78 250032.31-4.911.06-1.0915.30117.0081.06-20.4851.5251.43 ANT 2.4-2.5GHz Antenna pattern ANT 2.4-2.5GHz Antenna pattern Thanks for your valuable comment!

No.：BCTC/RF-EMC-005 Page: 1 of 53 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2409371285-1E Applicant: Hexgears (Shenzhen) Technology Co.,Ltd Product Name: Soda Mechanical Keyboard Test Model: Soda Tested Date: 2024-09-03 to 2024-09-09 Issued Date: 2024-09-09 Report No.:BCTC2409371285-1E No.：BCTC/RF-EMC-005 Page: 2 of 53 Edition：B.2 FCC ID:2BHVQ-SODA The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: Soda Mechanical Keyboard Trademark: Model/Type Reference: Soda KSODARD68T20206E, KSODAGN68T20206E, KSODAOE68T20206E, KSODARD68L20206E, KSODAGN68L20206E, KSODAOE68L20206E, KSODARD68C20206E, KSODAGN68C20206E, KSODAOE68C20206E Prepared For: Hexgears (Shenzhen) Technology Co.,Ltd Address: No. 1407, 14th Floor, Building 4, Excellence Meilin Center Plaza (North), Zhongkang Road, Meilin Street, Futian District, Shenzhen, China Manufacturer: Hexgears (Shenzhen) Technology Co.,Ltd Address: No. 1407, 14th Floor, Building 4, Excellence Meilin Center Plaza (North), Zhongkang Road, Meilin Street, Futian District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2024-09-03 Sample tested Date: 2024-09-03 to 2024-09-09 Issue Date: 2024-09-09 Report No.: BCTC2409371285-1E Test Standards FCC Part15.247 ANSI C63.10-2013 Test Results PASS Remark: This is Bluetooth Classic radio test report. Tested by: Approved by: Tang Changyu/ Project Handler Zero Zhou/Reviewer Report No.:BCTC2409371285-1E No.：BCTC/RF-EMC-005 Page: 3 of 53 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 5 2. Test Summary ....................................................................................................... 6 3. Measurement Uncertainty ..................................................................................... 7 4. Product Information And Test Setup ..................................................................... 8 4.1 Product Information ............................................................................................... 8 4.2 Test Setup Configuration ...................................................................................... 8 4.3 Support Equipment ............................................................................................... 9 4.4 Channel List .......................................................................................................... 9 4.5 Test Mode ........................................................................................................... 10 4.6 Table Of Parameters Of Text Software Setting ................................................... 10 5. Test Facility And Test Instrument Used ............................................................... 11 5.1 Test Facility ......................................................................................................... 11 5.2 Test Instrument Used .......................................................................................... 11 6. Conducted Emissions .......................................................................................... 13 6.1 Block Diagram Of Test Setup .............................................................................. 13 6.2 Limit .................................................................................................................... 13 6.3 Test procedure .................................................................................................... 13 6.4 EUT operating Conditions ................................................................................... 13 6.5 Test Result .......................................................................................................... 14 7. Radiated emissions ............................................................................................. 16 7.1 Block Diagram Of Test Setup .............................................................................. 16 7.2 Limit .................................................................................................................... 17 7.3 Test procedure .................................................................................................... 18 7.4 EUT operating Conditions ................................................................................... 19 7.5 Test Result .......................................................................................................... 19 8. Radiated Band Emission Measurement And Restricted Bands Of Operation ..... 23 8.1 Block Diagram Of Test Setup .............................................................................. 23 8.2 Limit .................................................................................................................... 23 8.3 Test procedure .................................................................................................... 24 8.4 EUT operating Conditions ................................................................................... 24 8.5 Test Result .......................................................................................................... 25 9. Spurious RF Conducted Emissions ..................................................................... 26 9.1 Block Diagram Of Test Setup .............................................................................. 26 9.2 Limit .....................................................................................…

Text truncated - open the document above for the full version.

17. EUT Test Setup Photographs Conducted Measurement Photo Radiated Measurement Photos