2BKIH-BNOX6BinoX 6 Dual (Day/Night/Thermal Binocular)

Binox 6 Dual MULTISPECTRAL BINOCULAR MANUAL AMERICAN TECHNOLOGIES NETWORK CORP. 2 Welcome to the ATN Family! Thank you for choosing the Binox 6 Dual Multispectral Binocular! This manual will guide you through the setup, operation, and maintenance of your device to ensure optimal performance and long service life. Please read this manual carefully before using the product and retain it for future reference. REVISION HISTORY VersionRevision TextReleased V1.0.0First releaseNovember 2025 3 ABOUT THIS MANUAL • This manual is provided for reference only. Minor differences may exist between the descriptions in this manual and the actual product. • We are not liable for any loss or damage resulting from operation of the product in ways that are not in accordance with this manual. • The manual may be updated in accordance with the latest laws, regulations, or product revisions. For detailed or updated information, please refer to the printed manual, QR code, or our official website. • All designs, features, and software are subject to change without prior notice. Product updates may result in differences between your device and the information in this document. • Printing errors or discrepancies in function descriptions, operations, or technical data may occur. In case of doubt or dispute, we reserve the right of final interpretation. • If the PDF version of this manual cannot be opened, please update your reader software or try another standard PDF reader. • All trademarks and registered trademarks mentioned in this manual are the property of their respective owners. • If any issues occur while using the device, please contact your supplier, local distributor, or customer service for assistance. • In the event of any uncertainty or disagreement, the manufacturer reserves the right of final explanation. 4 TABLE OF CONTENTS About This Manual .............................3 1. Product Introduction ............................6 2. Product Overview ...............................6 2.1 Package Contents ..........................6 2.2 Component Description ......................7 2.3 Button Description ..........................9 2.4 Specifications ............................12 3. Device Operation ..............................16 3.1 Power Supply .............................16 3.1.1 Installing the Batteries ..................16 3.1.2 Charging the Device ....................17 3.2 Power On / Off ............................17 3.3 Controls .................................18 3.4 Initial Setup ..............................18 3.5 Image Adjustment .........................19 3.5.1 Diopter Adjustment ....................19 3.5.2 Adjusting Interpupillary Distance ..........20 3.5.3 Focus Adjustment .....................21 3.5.4 Adjusting IR Illuminator .................21 3.5.5 Status Bar Display .....................22 3.5.6 Switching Between Thermal and Optical Channels ................................23 3.6 Videos Recording and Capturing Images .......24 3.6.1 Recording Videos. . . . . . . . . . . . . . . . . . . . . . 24 3.6.2 Capturing Images .....................24 4. Configuring the Binocular .......................25 4.1 Main Menu Overview .......................25 4.1.1 D efo g ...............................25 4.1. 2 EIS .................................26 4.1.3 Scene Mode ..........................26 5 4.1.4 Image Mode ..........................27 4.1.5 IR Light .............................34 4.1.6 G a ll er y ..............................35 4.1.7 Functionalities ........................35 4.1.8 Settings .............................38 4.1. 8 .1 S et t i n g N U C .....................41 4.1.8.2 Setting Pixel Correction ............42 4.1.8.3 Wi-Fi Connection Setup ............43 5. System Update ................................43 5.1 Manual Firmware Update ....................43 5.2 Firmware Update via Mobile App ..............44 6. Exporting Files ................................44 7. Important Safety Information ....................45 8. FCC Compliance Statement .....................48 9. Warranty and Support Information ................49 5-Year Limited Product Warranty .................49 Limitation of Liability ..........................49 Product Warranty Registration ..................50 Obtaining Warranty Service ....................50 6 1. PRODUCT INTRODUCTION The Binox 6 Dual Multispectral Binocular delivers advanced thermal and digital imaging performance with exceptional clarity and a fast refresh rate, ensuring smooth and accurate observation even in dynamic environments. Designed for reliable operation in all lighting and weather conditions, the binocular detects both thermal and visible-light signatures of objects, animals, and structures in complete darkness, fog, haze, or bright light - maintaining maximum situational awareness in any scenario. The Binox 6 is equipped with an integrated Laser Range Finder (LRF) for precise distance measurement, enhancing target identification and range estimation capabilities. Built for professional and field applications, the Binox 6 Dual Multispectral Binocular combines robust construction, intelligent image processing, and long operational endurance — delivering dependable performance and high-quality imagery in the most challenging environments. 2. PRODUCT OVERVIEW 2.1 PACKAGE CONTENTS Binox 6 Dual Multispectral Binocular 2x18650 rechargeable batteries Data cable Lens caps Portable bag Battery charger Lens cloth Neck strap 7 2.2 COMPONENT DESCRIPTION THIS PRODUCT CONTAINS NATURAL RUBBER LATEX, WHICH MAY CAUSE ALLERGIC REACTIONS CAUTION! The instructions in this manual are for informational use only and subject to change without notice. This manual is not to be construed as a commitment by ATN Corp. ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. ©2025 ATN Corp. All rights reserved. 14 15 8 7 5 6 10 11 9 4 3 2 12 1 13 8 Table 2.2.1 Component description No.ComponentCurrent Status…

Text truncated - open the document above for the full version.

TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: s ection 2.911(d)(7) filing To w hom it may concern, Th is letter is to confirm that James Munn has accepted responsibility to act as the agent for service of process as acknowledged by the applicant, American Technology Network corp. The U.S. Agent further agrees to the obligations defined in the current version of FCC guidance document, KDB 986446. U.S. Agent: James Munn Title: CEO Company Name: American Technology Network corp Address: 2400 NW 95 Ave, Doral, FL 33172 Telephone No: 415 407 5929 Email: [email protected] FRN (FCC Registration Number for applicant) 0035496397 FRN (FCC Registration Number for U.S. Agent 0035496397 The applicant accepts and acknowledges the obligation to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. If the U.S. Agent is a test lab or TCB, the entity attests that procedures have been put into place to ensure that the entity remains impartial as defined in ISO 17025 or 17065, as applicable. Signature of Applicant (must be signed by either the contact of record in the FCC d atabase for the applicant grantee code or authorized agent/employee): Signature of U.S. Agent (if different from applicant): Name: James Munn Name: Date: Date: 11/17/25

Attestation Statement -FCC Date: November 12th, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Attestation regarding ‘covered’ equipment and the Covered List FCC ID: 2BKIH-BNOX6 To whom it may concern, Per 2.911(d)(5)(i), James Munn certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Per 2.911(d)(5)(ii) , James Munn certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Per KDB 986446 D01 v03 section B, 2a, James Munn certifies that the equipment for this application does not contain Kaspersky cybersecurity or anti-virus software. Sincerely, James Munn CEO

Agent Authorization Letter Date 05/21/2026 To whom it may concern, We, the undersigned, hereby authorize Ravi Reddy, Director of Operations of American Technology Network, Corp., to act on our behalf, as our agent, in the following matters related to the FCC and/or ISED Canada approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. This authorization applies to the following FCC certification projects and associated FCC IDs: Project: GU-ATNQ-0001 FCC ID: 2BKIH-THRM6 Project: GU-ATNQ-0002 FCC ID: 2BKIH-BLZM6 Project: GU-ATNQ-0003 FCC ID: 2BKIH-BNOX6 Any act carried out by Ravi Reddy within the scope of this authorization shall have the same effect as our own. This authorization shall expire 12 months from the original date. Sincerely, James M unn CEO American Technology Network, Corp.

REQUEST FOR CONFIDENTIALITY LETTER – FCC Date: November 12, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, Maryland 21046 Re: Request for Confidentiality FCC ID: 2BKIH-BNOX6 To whom it may concern, We hereby respectfully request that under the provision of 47 CFR 0.459 and 0.457(d) the documents listed below and attached with this application for certification be provided with confidential status: ● Schematics ● Operational Description ● Frequency Block Diagrams ● Bill of Materials Any exhibit / information for which we have requested confidentiality, but which may not be accorded such treatment by the FCC, should be returned to us. The documents listed above contain trade secrets that are treated as confidential by us. Substantial competitive harm to us could result should they be made available to the public. James Munn CEO

Cover letter for FCC application Date: April 22nd, 2026 To Whom It May Concern: ATN Corp is submitting model BINOX 6 Dual (Day/Night/Thermal Binocular) for FCC certification. We are seeking an original certification under Part 15.247. FCC ID: 2BKIH-BNOX6 Applicable rule parts: FCC Part 15C Type of equipment approval being sought: Original Certification The BINOX 6 Dual is a day/night and thermal binocular device equipped with an integrated 2.4 GHz Wi-Fi module compliant with IEEE 802.11 b/g/n standards. The radio is used for wireless communication with external devices such as smartphones or tablets for video streaming, device control, and data transfer. Thank you for your attention to this matter. Sincerely, James Munn CEO

BinoX 6 BinoX 6 BinoX 6 BinoX 6 BinoX 6 BinoX 6 BinoX 6 BinoX 6 BinoX 6 BinoX 6

EXEMPTION FROM RF EXPOSURE EVALUATION EXRPT.2024.05.10.0 RADIO FREQUENCY RADIATION EXPOSURE ATN Corp. BinoX 6 Dual General SAR test reduction & exclusion guidance KDB 447498 Report no. TRA-068317-47-01A EXEMPTION FROM RF EXPOSURE EVALUATION EXRPT.2024.05.10.0 Test Report Number: TRA-068317-47-01A Works Order Number: TRA-068317-00 Equipment Under Test (EUT): BinoX 6 Dual FCC ID: 2BKIH-BNOX6 Manufacturer: ATN Corp. Address: 2400 NW 95th Avenue Doral Florida 33172 USA Client Contact: Ravy Reddy  650-989-5100  [email protected] Written by: S Garwell Radio Test Engineer Approved by: D Winstanley Radio Senior Test Engineer Date: 2026-07-22 EXEMPTION FROM RF EXPOSURE EVALUATION EXRPT.2024.05.10.0 OVERVIEW Section 1.3 of KDB 44798 D04 v01 states that, “Under the new rules, all radio services and operations are subject to Routine Evaluation [§§ 1.1307(b)(1), 2.1033(f), etc.], unless shown to qualify under the exemptions provided in the rules and OET Lab policies for equipment authorization.” The glossary of KDB 447498 D04 v01 specifies that an exempt RF device is defined “solely from the obligation to perform a routine environmental evaluation to demonstrate compliance with the RF exposure limits in § 1.1310; it is not exemption from the equipment authorization procedures described in 47 CFR Part 2, not exemption from general obligations of compliance with the RF exposure limits in § 1.1310 of this chapter, and not exemption from determination of whether there is no significant effect on the quality of the human environment under § 1.1306.” Compliance with the exemption criteria defined in 1.1307(b) confirm compliance with the limits in § 1.1310. COMPLIANCE WITH FCC 1.1310 Per 1.1307(b)(3), (i) For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold P th (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by: 푃 푡ℎ ( 푚푊 ) = { 퐸푅푃 20 푐푚 ( 푑20 푐푚 ⁄) 푥 푑≤20 푐푚 퐸푅푃 20 푐푚 20 푐푚 <푑 ≤40 푐푚 Where 푥= − log 10 ( 60 퐸푅푃 20 푐푚 √ 푓 ) 푎푛푑 푓 푖푠 푖푛 퐺퐻푧; And 퐸푅푃 20 푐푚 (푚푊)= { 2040푓0.3 퐺퐻푧 ≤푓 <1.5 퐺퐻푧 30601.5 퐺퐻푧 ≤푓 ≤6 퐺퐻푧 (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time- averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). TABLE 1 TO §1.1307(b)(3)(i)(C)—SINGLE RF SOURCES SUBJECT TO ROUTINE ENVIRONMENTAL EVALUATION RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . EXEMPTION FROM RF EXPOSURE EVALUATION EXRPT.2024.05.10.0 (ii) For multiple RF sources: Multiple RF sources are exempt if: (A) The available maximum time-averaged power of each source is no more than 1 mW and there is a separation distance of two centimeters between any portion of a radiating structure operating and the nearest portion of any other radiating structure in the same device, except if the sum of multiple sources is less than 1 mW during the time-averaging period, in which case they may be treated as a single source (separation is not required). This exemption may not be used in conjunction with other exemption criteria other than those is paragraph (b)(3)(i)(A) of this section. Medical implant devices may only use this exemption and that in paragraph (b)(3)(i)(A). (B) in the case of fixed RF sources operating in the same time-averaging period, or of multiple mobile or portable RF sources within a device operating in the same time averaging period, if the sum of the fractional contributions to the applicable thresholds is less than or equal to 1 as indicated in the following equation. ∑ 푃 푖 푃 푡ℎ,푖 + 푎 푖=1 ∑ 퐸푅푃 푗 퐸푅푃 푡ℎ,푗 +∑ 퐸푣푎푙푢푎푡푒푑 푘 퐸푥푝표푠푢푟푒 퐿푖푚푖푡 푘 ≤1 푐 푘=1 푏 푗=1 Where: a = number of fixed, mobile, or portable RF sources claiming exemption using paragraph (b)(3)(i)(B) of this section for P th , including existing exempt transmitters and those being added. b = number of fixed, mobile, or portable RF sources claiming exemption using paragraph (b)(3)(i)(C) of this section for Threshold ERP, including existing exempt transmitters and those being added. c = number of existing fixed, mobile, or portable RF sources with known evaluation for the specified minimum distance including existing evaluated transmitters. P i = the available maximum time-averaged power or the ERP, whichever is greater, for fixed, mobile, or portable RF source i at a distance between 0.5 cm and 40 cm (inclusive). P th,i = the exemption threshold power (P th ) according to paragraph (b)(3)(i)(B) of this section for fixed, mobile, or portable RF source i. ERP j = the ERP of fixed, mobile, or portable RF source j. ERP th,j = exemption threshold ERP for fixed, mobile, or portable RF source j, at a distance of at least λ/2π according to the applicable formula of paragraph (b)(3)(i…

Text truncated - open the document above for the full version.

广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第1页共13页 产品规格承认书 SpecificationForApproval 产品名称： ProductionName 2.4G&5.8G内置天线 产品型号： ProductionNumber GKZS-2.4&5.8G-F0242-RF0.81I3-50 供应商： Supplier 广州市高科中实通信技术有限公司 供应商确认盖章(SupplierSignature) 工程师Engineer审核Checkedby批准Approvedby 何明卫巢晓馨胡泽伟 2025年09月03日2025年09月03日2025年09月03日 客户确认盖章(CustomerSignature) 工程师Engineer审核Checkedby批准Approvedby 年月日年月日年月日 注：客户确认盖章后，请将此承认书回传到我公司。 广州市高科中实通信技术有限公司 地址:中国广东省广州市从化区神岗广从南路22号 Tel:020-87080630/87080639/87080632 Fax:020-87080731 http://www.gkzs.com.cn 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第2页共13页 变更履历表 DescriptionRecord 版本 Version 修改内容 ContentRevised 创建者 Modifier 日期 Date A/0初始新建胡梅娇2025.09.03 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第3页共13页 一、产品结构图纸（mm） 标记 位置更改内容版本签名日期 图样名称 表面处理 第三视角： 审核 工艺 标准化 批准 产品型号 比例 图样编号 单位 mm 版本页次 材料 重量 设 计 广州市高科中实通信技术有限公司 1/1 A0 混合 GKZS-2.4&5.8G-F0242-RF0.81I3-50 2.4G&5.8G内置天线 注释： 1、外观等级：4 I P R F 0 . 8 1 线 （ 黑 色 ） I P E X 头 （ 三 代 ） 50±5 F P C 板 2 0 . 1 ± 0 . 5 15.65±0.5 二、产品实物图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第4页共13页 三、天线技术参数 厂家内部型号Ex：GKZS-2.4&5.8G-F0242-RF0.81I4-50 类别Ex：2.4G&5.8G 频段Ex：2400-2500MHz5150-5850MHz 形态Ex：无源内置天线（FPC） 极化Ex：线极化 驻波Ex：≤15 效率 Ex：≥25%@2400--2500MHz Ex：≥15%@5150-5850MHz 增益 Ex：2.14dBi（均值）、2.84dBi（峰值）@2400--2500MHz Ex：3.16dBi（均值）、4.78dBi（峰值）@5150--5850MHz 接头类型Ex：IPEX（三代） 接头属性Ex：母头 有源/无源Ex：无源 天线尺寸Ex：20.1x15.65mm 馈线类型和尺寸Ex：RF0.81线(黑色）L=50mm 馈线损耗Ex：RF0.81线，100MHz/6000MHz:-10≤X<0 工作温度Ex：-40°C~80°C 功率容量Ex：33dBm 特性阻抗（R）Ex：50Ω 盐雾等级Ex：24H 重量(Weight)Ex：0.3g 备注Ex： 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第5页共13页 四、线材参数 1.产品描述 1.1适用于TeflonFEP绝缘系列柔软同轴电缆线。 产品特征：极好的柔软性，低驻波比，良好的屏蔽性能，精确的相位匹配。 在微波设备、无线通信设备系统和设备都有使用。 1.2品名:同轴线缆; 1.3型号:RF0.81/TC; 1.4规格:7/0.05SPC; 使用特性: 特性阻抗:50Ω 工作温度:-65°C---+200°C 工作湿度:＜90% 最小弯曲半径：5mm 2.电缆详细资料及结构图: 2.1结构图: 绝缘 内导体 外导体 护套 2.2电缆材质及尺寸: 项目单位材质及尺寸 内导体 材质/镀银铜线 根数/直径根/mm7/0.05±0.02 外径mmΦ0.15 绝缘 材质/TeflonFEP(聚全氟乙烯-丙烯树脂) 厚度mm0.13 完成外径mmΦ0.41±0.03 外导体 材质/镀锡铜线 形式/编织 构成/3*16/0.05mm 密度%≥93%(24目) 完成外径mmΦ0.63±0.05(仅供参考) 护套 材质/TeflonFEP(聚全氟乙烯-丙烯树脂) 厚度mm0.09 完成外径mmΦ0.81±0.05 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第6页共13页 护套颜色/灰色和黑色(也可按客户要求) 3.电缆特性 3.1机械及物理特性: 项目标准要求测试方法备注说明 内导体拉伸率≥20%GB4909 =（L1-L0）/L0×100% L1最终标距长度 L0原始标距长度 绝缘外观光滑/良好目测 绝缘材质比重2.14-2.19/根据材料特性 绝缘介电常数2.1×10 6 HZ/根据材料特性 护套外观光滑/良好目测/ 3.2电气性能 测试项目标准要求参照标准测试方法备注 绝缘电阻≥10MΩ.KmGB3048 500V交流 电持续 1min 电阻测试仪 最大承受压力8000N/// 介质耐压0.8KVGB3048 1KV交流电 持续1min 耐压测试仪 工作电压300VGB3048// 特性阻抗50±2ΩGB4098/ 网析分析仪、TRK测 试仪 电容96.65PF/MGB4098/数字电容仪 传输速率70%//网析分析仪 传输延迟4．8ns/m/// 最大工作频率1GHZ/// 屏蔽率减100dB/GB9023/ 阻燃性passedIEC332-3// 卤素特性passedICE754// 屏蔽衰减（db/m） 测试频率衰减 1000MHZ3.6 2000MHZ5.1 3000MHZ6.2 4000MHZ7.5 5000MHZ8.5 6000MHZ9.4 驻波比6000MHZ以下≤1.50GB9023/ 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第7页共13页 六、天线性能测试（单天线测试） 1、驻波比图 2 、回波损耗图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第8页共13页 2 、增益 & 效率数值表 频率 Frequency(MHz) 增益 Gain(dBi) 效率 Efficiency(%) 2400.02.5532.63 2410.02.7934.23 2420.02.8434.37 2430.02.6933.78 2440.02.5633.33 2450.02.3232.85 2460.01.9631.64 2470.01.6631.67 2480.01.4331.67 2490.01.4231.57 2500.01.4429.61 5150.00.3722.48 5170.01.3224.22 5190.01.1822.80 5210.01.2323.47 5230.02.1726.70 5250.02.4426.93 5270.03.0928.17 5290.03.4029.10 5310.03.7629.98 5330.04.5633.55 5350.04.7833.73 5715.04.2229.01 5735.04.0227.22 5755.04.3129.50 5775.04.0627.78 5795.03.9726.61 5815.04.3830.53 5835.03.8028.33 5855.03.1126.31 5795.03.9726.61 5815.04.3830.53 5835.03.8028.33 5855.03.1126.31 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第9页共13页 3 、方向图（ 2D 及 3D 图） 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第10页共13页 4 、效率曲线图 5 、增益曲线图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第11页共13页 七、可靠性测试报告 产品名称：2.4G&5.8G内置天线产品型号GKZS-2.4&5.8G-F0242-RF0.81I3-50 测试项目测试条件判定标准试验数判定 高温存储 80°C±2°C环境中放置 12H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；线材无破 损融化、气泡等现象；性能正常 5PCS合格 低温存储 -40°C±2°C环境中放置 12H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 温度循环 1、在-20°C的环境中放 置30分钟，在25°C的环 境中放置5分钟，在70°C 的环境中放置30分钟， 在25°C的环境中放置5 分钟 2、循环次数：5次； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 耐温热 在温度40°C±2°C，湿度 93±2%RH环境放置4H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 盐雾试验 在氯化钠溶液浓度5% （㎡），PH值6.5-7.2， 温度35°C±2°C湿 度>85%RH的密闭环境中 放置24小时 电缆头无氧化、发黄、发绿、红锈、 白锈等；性能正常 5PCS合格 试样前产品图：试样后产品图： 试验设备： 编制/日期：谢文婷/2025.09.02审核/日期：胡泽伟/2025.09.02 备注： 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第12页共13页 八、全尺寸测量报告 编号：GKZS-FM-G-2500903 零件型号： GKZS-2.4&5.8G-F0242-RF0.81I3-50 零件名称：2.4G&5.8G内置天线 测量数量：5PCS测量日期：2025.09.03 产品尺寸图： 序号尺寸 / 规范 供应商测量结 果 测量 工具 判定 12345合格 不合 格 115.65±0.5mm15.515.615.715.815.5卡尺OK 220.1±0.5mm20.220.320.420.320.4卡尺OK 350±5mm5152505152直尺OK 编制:胡梅娇审核:刘南伙批准:胡泽伟 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第13页共13页 九、包装说明 1、50PCS/扎,1000pcs/袋，封口袋。 2、装纸箱，5000PCS/箱 (实际以出货数量为准) 3、内附出货检验报告， 在箱外侧面右上角贴标签，封口。 IP IP IP IP IP IP IP IP IP IP

Report on the Radio Testing of a ATN Corp. BinoX 6 Dual With Respect to Specification FCC 47CFR 15.247 TEST DATE: 2026-04-08 to 2026-04-15 Tested by: S Garwell, D Winstanley Radio Test Engineer’s Written by: S Garwell Radio Test Engineer Approved by: J Charters Lab Manager Date: 2026-06-29 Disclaimers: [1] This document may be reproduced only in its entirety and without change [2] The results contained in this document relate only to the item(s) tested Report Number: TRA-068317-47-00B Issue: B RF915 Rev. 19 Report Number: TRA-068317-47-00B Page 2 of 65 1 Revision Record Issue Issue Date Revision History A 2026-04-16 Original B 2026-06-29 General updates and corrections throughout document Report Number: TRA-068317-47-00B Page 3 of 65 2 Summary Test Report Number: TRA-068317-47-00B Works Order Number: TRA-068317-00 Purpose of Test: Testing of Radio Frequency Equipment per the Relevant Authorisation Requirements of Chapter 47 of CFR (Code of Federal Regulations) Part 2, Subpart J Test Specifications: 47CFR15.247 Equipment Under Test (EUT): BinoX 6 Dual FCC Identifier: 2BKIH-BNOX6 EUT Serial Number: CA0D53FRCU807CC Manufacturer: ATN Corp. Address: 2400 NW 95th Avenue Doral Florida 33172 USA Client Contact: Ravi Reddy  650-989-5100  [email protected] Order Number: 109912 Test Date: 2026-04-08 to 2026-04-15 Tested By: S Garwell, D Winstanley Element Report Number: TRA-068317-47-00B Page 4 of 65 2.1 Test Summary Test Method and Description Requirement Clause FCC 47 CFR Applicable to this equipment Result / Note Restricted Bands of Operation 15.205 Pass AC power line conducted emissions 15.207 Pass 6 dB bandwidth 15.247 (a) (2) Pass Occupied bandwidth (99% bandwidth) N/A N/A Conducted output power Peak 15.247 (b) (3) Pass Maximum Undesirable / unwanted emissions 15.247 (d) Pass Power spectral density 15.247 (e) Pass Pulsed operation correction 15.35 (c) - Specific notes: General notes: The results contained in this report relate only to the items tested, in the condition at time of test, and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Any modifications made are identified in Section 8 of this report. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 5.2 of this test report (Deviations from Test Standards). The decision rule for compliance is not inherent within this specification and compliance is based on the customer requesting a simple acceptance rule based on understanding and acceptance of Elements Measurement Uncertainty values. Graphical Representation of a Pass / Fail Binary Statement - Simple Acceptance ● = Measured value U = 95 % expanded measurement uncertainty Upper Specification Nominal Lower Specification Statement of Conformance Pass Pass Fail Fail U Report Number: TRA-068317-47-00B Page 5 of 65 3 Contents 1 Revision Record .......................................................................................................................................................................... 2 2 Summary ..................................................................................................................................................................................... 3 2.1 Test Summary ..................................................................................................................................................................... 4 3 Contents ...................................................................................................................................................................................... 5 4 Introduction .................................................................................................................................................................................. 6 5 Test Specifications ...................................................................................................................................................................... 7 5.1 Normative References ......................................................................................................................................................... 7 5.2 Deviations from Test Standards .......................................................................................................................................... 7 6 Glossary of Terms ....................................................................................................................................................................... 8 7 Equipment under Test ................................................................................................................................................................. 9 7.1 EUT Identification ................................................................................................................................................................ 9 7.2 System Equipment .............................................................................................................................................................. 9 EUT Mode of Operation ................................................................................................................................................................... 9 7.3 EUT Radio Parameters ....................................................................................................................................................... 9 7.3.1 General ........................................................................................................................................................................ 9 7.3.2 Antennas ..........................................................................................…

Text truncated - open the document above for the full version.

Test Setup Photos for Binox 6