2BKIH-THRM6Thermal Imaging Scope ThOR 6 Mini, TICO 6

ThOR 6 mini Series COMPACT THERMAL RIFLESCOPE MANUAL AMERICAN TECHNOLOGIES NETWORK CORP. 2 Welcome to the ATN Family! Thank you for choosing the ThOR 6 mini Compact Thermal Riflescope! This manual will guide you through the setup, operation, and maintenance of your device to ensure optimal performance and long service life. Please read this manual carefully before using the product and retain it for future reference. REVISION HISTORY VersionRevision TextReleased V1.0.0First releaseNovember 2025 3 ABOUT THIS MANUAL • This manual is provided for reference only. Minor differences may exist between the descriptions in this manual and the actual product. • We are not liable for any loss or damage resulting from operation of the product in ways that are not in accordance with this manual. • The manual may be updated in accordance with the latest laws, regulations, or product revisions. For detailed or updated information, please refer to the printed manual, QR code, or our official website. • All designs, features, and software are subject to change without prior notice. Product updates may result in differences between your device and the information in this document. • Printing errors or discrepancies in function descriptions, operations, or technical data may occur. In case of doubt or dispute, we reserve the right of final interpretation. • If the PDF version of this manual cannot be opened, please update your reader software or try another standard PDF reader. • All trademarks and registered trademarks mentioned in this manual are the property of their respective owners. • If any issues occur while using the device, please contact your supplier, local distributor, or customer service for assistance. • In the event of any uncertainty or disagreement, the manufacturer reserves the right of final explanation. 4 TABLE OF CONTENTS About This Manual .............................3 1. Product Introduction ............................6 2. Product Overview ...............................6 2.1 Package Contents ..........................6 2.2 Device Description ..........................7 2.3 Button Description ..........................8 2.4 Specifications ............................10 2.5 Mounting the Riflescope ....................14 3. Device Operation ..............................15 3.1 Power Supply .............................15 3.1.1 Installing the Battery ....................16 3.1.2 Charging the Device ....................16 3.2 Power On / Off ............................17 3.3 Controls .................................17 3.4 Initial Setup ..............................17 3.5 Image Adjustment .........................18 3.5.1 Diopter Adjustment ....................18 3.5.2 Focus Adjustment .....................19 3.5.3 Status Bar Display .....................19 3.5.4 Adjusting Brightness ...................21 3.5.5 Adjusting Sharpness ...................21 3.6 Videos Recording and Capturing Images .......22 3.6.1 Recording Videos. . . . . . . . . . . . . . . . . . . . . . 22 3.6.2 Capturing Images .....................22 4. Configuring the Riflescope ......................23 4.1 Quick Menu ..............................23 4.2 Main Menu ...............................24 4.2.1 Thermal .............................25 4.2.2 Reticles .............................29 4.2.3 Zeroing Profile ........................30 5 4.2.4 Zeroing Setup ........................31 4.2.5 Optical Ranging Mode .................32 4.2.6 Gallery ..............................33 4.2.7 RAV (Recoil Activated Video). . . . . . . . . . . . . 34 4.2.8 Functionalities ........................34 4.2.8.1 PIP (Picture-in-Picture) Mode ........36 4.2.8.2 Hot Point Tracking ................37 4.2.9 Settings .............................38 4.2.9.1 Setting NUC (Non-Uniformity Correction) 40 4.2.9.2 Setting Pixel Correction ............41 4.2.9.3 Wi-Fi Connection Setup ............42 5. System Update ................................43 5.1 Manual Firmware Update ....................43 5.2 Firmware Update via Mobile App ..............44 6. Exporting Files ................................44 7. Important Safety Information ....................45 8. FCC Compliance Statement .....................48 9. Warranty and Support Information ................49 5-Year Limited Product Warranty .................49 Limitation of Liability ..........................49 Product Warranty Registration ..................50 Obtaining Warranty Service ....................50 6 1. PRODUCT INTRODUCTION The ThOR 6 mini Compact Thermal Riflescope provides high-precision thermal imaging with exceptional clarity and a fast frame rate, ensuring smooth and accurate target tracking even in dynamic environments. Designed for continuous operation under all lighting and weather conditions, the riflescope detects the thermal signatures of objects, animals, and structures in complete darkness, fog, haze, or intense light — maintaining optimal situational awareness in every scenario. Built for demanding field applications, the ThOR 6 mini delivers reliable performance, advanced image processing, and consistent visual quality across a wide range of operational environments. 2. PRODUCT OVERVIEW 2.1 PACKAGE CONTENTS ATN THOR 6 mini 2x18650 battery USB Type-C cable Carrying bag Mount Battery charger Lens cloth Heated target for zeroing 7 2.2 DEVICE DESCRIPTION THIS PRODUCT CONTAINS NATURAL RUBBER LATEX, WHICH MAY CAUSE ALLERGIC REACTIONS CAUTION! The instructions in this manual are for informational use only and subject to change without notice. This manual is not to be construed as a commitment by ATN Corp. ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. ©2025 ATN Corp. All rights reserved. EYESHADE USB TYPE-C FOCUS ADJUSTMENT RING DIOPTER ADJUSTMENT RING BATTERY COMPARTMENT BATTERY COMPARTMENT SWITCH 8 2.3 BUTTON DESCRIPTION CONTROL WHEEL UP BUTTON DOWN BUTTON Table 2.3.1 Button description Button Current Status Sh…

Text truncated - open the document above for the full version.

TICO 6 Series THERMAL IMAGING CLIP-ON MANUAL AMERICAN TECHNOLOGIES NETWORK CORP. 2 Welcome to the ATN Family! Thank you for choosing the TICO 6 Thermal imaging clip-on! This manual will guide you through the setup, operation, and maintenance of your device to ensure optimal performance and long service life. Please read this manual carefully before using the product and retain it for future reference. REVISION HISTORY VersionRevision TextReleased V1.0.0First releaseNovember 2025 3 TABLE OF CONTENTS About This Manual .............................5 1. Product Introduction ............................6 2. Product Overview ...............................6 2.1 Package Contents ..........................6 2.2 Device Description ..........................7 2.3 Button Description ..........................8 2.4 Specifications ............................10 2.5 Mounting the clip-on .......................13 2.6 Mounting the Eyepiece .....................15 3. Device Operation ..............................15 3.1 Power Supply .............................15 3.1.1 Installing the Battery ....................15 3.1.2 Charging the batteries ..................16 3.2 Power On / Off ............................17 3.3 Initial Setup ..............................17 3.4 Image Adjustment .........................18 3.4.1 Focus Adjustment .....................18 3.4.2 Status Bar Display .....................19 3.4.3 Adjusting Brightness ...................20 3.4.4 Adjusting Sharpness ...................21 3.5 Videos Recording and Capturing Images .......21 3.5.1 Recording Videos .....................21 3.5.2 Capturing Images .....................22 4. Configuring the clip-on .........................22 4.1 Quick Menu ..............................22 4.2 Main Menu ...............................24 4.2.1 Thermal .............................24 4.2.2 Zeroing Profile ........................28 4.2.3 Zeroing .............................29 4.2.4 Gallery ..............................30 4 4.2.5 RAV (Recoil Activated Video) ............30 4.2.6 Functionalities ........................31 4.2.6.1 Hot Point Tracking .................32 4.2.7 Settings .............................33 4.2.7.1 Setting NUC .....................36 4.2.7.2 Setting Pixel Correction ............36 4.2.7.3 Wi-Fi Connection Setup ............37 5.Remote control X-TRAC 6 ........................38 5.1 Connecting The Remote ....................38 5.2 Remote Button Description ..................39 6. System Update ................................40 6.1 Manual Firmware Update ....................40 6.2 Firmware Update via Mobile App ..............41 7. Exporting Files ................................41 8. Important Safety Information ....................42 9. FCC Compliance Statement .....................44 10. Prop 65 warning ..............................45 Proposition 65 Warning for California Consumers ....45 Export Disclaimer ............................45 11. Warranty and Support Information ...............46 5-Year Limited Product Warranty .................46 Limitation of Liability ..........................46 Product Warranty Registration ..................47 Obtaining Warranty Service ....................47 5 ABOUT THIS MANUAL • This manual is provided for reference only. Minor differences may exist between the descriptions in this manual and the actual product. • We are not liable for any loss or damage resulting from operation of the product in ways that are not in accordance with this manual. • The manual may be updated in accordance with the latest laws, regulations, or product revisions. For detailed or updated information, please refer to the printed manual, QR code, or our official website. • All designs, features, and software are subject to change without prior notice. Product updates may result in differences between your device and the information in this document. • Printing errors or discrepancies in function descriptions, operations, or technical data may occur. In case of doubt or dispute, we reserve the right of final interpretation. • If the PDF version of this manual cannot be opened, please update your reader software or try another standard PDF reader. • All trademarks and registered trademarks mentioned in this manual are the property of their respective owners. • If any issues occur while using the device, please contact your supplier, local distributor, or customer service for assistance. • In the event of any uncertainty or disagreement, the manufacturer reserves the right of final explanation. 6 1. PRODUCT INTRODUCTION The TICO 6 Thermal imaging clip-on system provides high-precision thermal imaging with exceptional clarity and a fast frame rate, ensuring smooth and accurate target tracking even in dynamic environments. Designed for continuous operation under all lighting and weather conditions, the clip-on detects the thermal signatures of objects, animals, and structures in complete darkness, fog, haze, or intense light, maintaining optimal situational awareness in every scenario. Built for demanding field applications, the TICO 6 delivers reliable performance, advanced image processing, and consistent visual quality across a wide range of operational environments. 2. PRODUCT OVERVIEW 2.1 PACKAGE CONTENTS ATN TICO 6 clip-on 2x18650 rechargeable batteries (1 already inside device) USB Type-C cable Battery charger Lens cloth MountRubber adapter Carrying bag Remote control Heated target for zeroing 7 2.2 DEVICE DESCRIPTION THIS PRODUCT CONTAINS NATURAL RUBBER LATEX, WHICH MAY CAUSE ALLERGIC REACTIONS CAUTION! The instructions in this manual are for informational use only and subject to change without notice. This manual is not to be construed as a commitment by ATN Corp. ATN Corp. assumes no responsibility or liability for any errors or inaccuracies that may appear in this book. ©2026 ATN Corp. All rights reserved. BATTERY COMPARTMENT SWITCH BAT TERY COMPARTMENT MOUNTING THREAD FOCUS ADJUSTMENT RING USB TYPE-C 8 2.3 …

Text truncated - open the document above for the full version.

ThOR 6 mini ThOR 6 mini ThOR 6 mini ThOR 6 mini ThOR 6 mini ThOR 6 mini ThOR 6 mini ThOR 6 mini ThOR 6 mini

Test Setup Photos – Thor 6 Mini Radiated Spurious Emissions: Power Line Conducted Emissions:

Report on the Radio Testing of a ATN Corp. THOR 6 Mini With Respect to Specification FCC 47CFR 15.247 TEST DATE: 2025-11-03 to 2026-02-13 Tested by: S Garwell Radio Test Engineer Written by: S Garwell Radio Test Engineer Approved by: J Charters Lab Manager Date: 2026-05-26 Disclaimers: [1] THIS DOCUMENT MAY BE REPRODUCED ONLY IN ITS ENTIRETY AND WITHOUT CHANGE [2] THE RESULTS CONTAINED IN THIS DOCUMENT RELATE ONLY TO THE ITEM(S) TESTED Report Number: TRA-068316-47-00B Issue: B RF915 Report Number: TRA-068316-47-00B RF915 14 Page 2 of 54 1 Revision Record Issue Issue Date Revision History A 2026-05-08 Original B 2026-05-26 Updated references throughout document to ANSI C63.10 2020, correction to 802.11b bandwidth plots in section 13.6, general corrections throughout document. Report Number: TRA-068316-47-00B RF915 14 Page 3 of 54 2 Summary TEST REPORT NUMBER: TRA-068316-47-00B WORKS ORDER NUMBER: TRA-068316-00 PURPOSE OF TEST: Testing of radio frequency equipment per the relevant authorisation requirements of chapter 47 of CFR (code of federal regulations) Part 2, subpart J & ISED Canada RSS- Gen TEST SPECIFICATION: 47CFR15.247 EQUIPMENT UNDER TEST (EUT): THOR 6 Mini FCC IDENTIFIER: 2BKIH-THRM6 EUT SERIAL NUMBER: V1.000.0000000.0.R.200825 MANUFACTURER/AGENT: ATN Corp. ADDRESS: 2400 NW 95th Avenue Doral Florida 33172 USA CLIENT CONTACT: Ravi Reddy  650-989-5100  [email protected] ORDER NUMBER: 109911 TEST DATE: 2025-11-03 to 2026-02-13 TESTED BY: S Garwell Element Report Number: TRA-068316-47-00B RF915 14 Page 4 of 54 2.1 Test Summary Test Method and Description Requirement Clause FCC 47 CFR Requirement Clause ISED RSS Applicable to this equipment Result / Note Radiated spurious emissions (restricted bands of operation and cabinet radiation) 15.205 247: 3.3 Pass AC power line conducted emissions 15.207 Gen: 8.8 Pass 6 dB bandwidth 15.247 (a) (2) 247: 5.2 (a) Pass Occupied bandwidth (99% bandwidth) N/A Gen: 6.7 N/A Conducted output power Peak 15.247 (b) (3) 247: 5.4 (d) Pass Maximum Undesirable / unwanted emissions 15.247 (d) 247: 5.5 Pass Power spectral density 15.247 (e) 247: 5.2 (b) 247: 6.2.4.2 Pass Pulsed operation correction 15.35 (c) Gen: 8.2 - Specific notes: General notes: The results contained in this report relate only to the items tested, in the condition at time of test, and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Any modifications made are identified in Section 8 of this report. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 5.2 of this test report (Deviations from Test Standards). The decision rule for compliance is not inherent within this specification and compliance is based on the customer requesting a simple acceptance rule based on understanding and acceptance of Elements Measurement Uncertainty values. Graphical Representation of a Pass / Fail Binary Statement - Simple Acceptance ● = Measured value U = 95 % expanded measurement uncertainty Upper Specification Nominal Lower Specification Statement of Conformance Pass Pass Fail Fail U Report Number: TRA-068316-47-00B RF915 14 Page 5 of 54 3 Contents 1 Revision Record ..................................................................................................................................................................... 2 2 Summary ................................................................................................................................................................................ 3 2.1 Test Summary ................................................................................................................................................................ 4 3 Contents ................................................................................................................................................................................. 5 4 Introduction ............................................................................................................................................................................. 6 5 Test Specifications ................................................................................................................................................................. 7 5.1 Normative References .................................................................................................................................................... 7 5.2 Deviations from Test Standards ..................................................................................................................................... 7 6 Glossary of Terms .................................................................................................................................................................. 8 7 Equipment under Test ............................................................................................................................................................ 9 7.1 EUT Identification ........................................................................................................................................................... 9 7.2 System Equipment ......................................................................................................................................................... 9 7.3 EUT Mode of Operation .................................................................................................................................................. 9 7.4 EUT Radio Parameters .................................................................................................................................................. 9 7.4.1 General .......................................…

Text truncated - open the document above for the full version.

广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第1页共14页 产品规格承认书 SpecificationForApproval 产品名称： ProductionName 2.4G&5.8G内置天线 产品型号： ProductionNumber GKZS-2.4&5.8G-F0241-RF0.81I-35 供应商： Supplier 广州市高科中实通信技术有限公司 供应商确认盖章(SupplierSignature) 工程师Engineer审核Checkedby批准Approvedby 何明卫巢晓馨胡泽伟 2025年09月28日2025年09月28日2025年09月28日 客户确认盖章(CustomerSignature) 工程师Engineer审核Checkedby批准Approvedby 年月日年月日年月日 注：客户确认盖章后，请将此承认书回传到我公司。 广州市高科中实通信技术有限公司 地址:中国广东省广州市从化区神岗广从南路22号 Tel:020-87080630/87080639/87080632 Fax:020-87080731 http://www.gkzs.com.cn 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第2页共14页 变更履历表 DescriptionRecord 版本 Version 修改内容 ContentRevised 创建者 Modifier 日期 Date A/0初始新建胡梅娇2025.07.16 A/1 FPC板丝印号由A1改A2原线长由35mm改 30mm 胡梅娇2025.07.25 A/2FPC板丝印号由A2版改A3版（性能优化）胡梅娇2025.09.01 A/3更新实物图胡梅娇2025.09.28 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第3页共14页 一、产品结构图纸（mm） 标记位置更改内容版本签名日期 图样名称 表面处理 第三视角： 审核 工艺 标准化 批准 产品型号 比例 图样编号 单位 mm 版本页次 材料 重量 设 计 广州市高科中实通信技术有限公司 1/1A0 混合 GKZS-2.4&5.8G-P0241-RF0.81I-35 2.4G&5.8G内置天线 注释： 1、外观等级：4 2 2 . 4 ± 0 . 5 25.56±0.5 R F 0 . 8 1 线 （ 黑 色 ） I P E X 头 （ 一 代 ） 30±5 F P C 板 G K - F 0 2 4 1 - A 3 二、产品实物图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第4页共14页 三、天线技术参数 厂家内部型号Ex：GKZS-2.4&5.8G-F0241-RF0.81I-35 类别Ex：2.4G&5.8G 频段Ex：2400-2500MHz5150-5850MHz 形态Ex：无源内置天线（FPC） 极化Ex：线极化 驻波Ex：≤7.0 效率Ex：15%(均值) 增益 Ex：-1.86dBi（均值）、-1.27dBi（峰值）@2400--2500MHz Ex：-1.06dBi（均值）、1.92dBi（峰值）@5150--5850MHz 接头类型Ex：IPEX（一代） 接头属性Ex：母头 有源/无源Ex：无源 天线尺寸Ex：25.56x22.4mm 馈线类型和尺寸Ex：RF0.81线(黑色）L=30mm 馈线损耗Ex：RF0.81线，100MHz/6000MHz:-10≤X<0 工作温度Ex：-40°C~80°C 功率容量Ex：33dBm 特性阻抗（R）Ex：50Ω 盐雾等级Ex：48H 重量(Weight)Ex：0.3g 备注Ex： 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第5页共14页 四、线材参数 1.产品描述 1.1适用于TeflonFEP绝缘系列柔软同轴电缆线。 产品特征：极好的柔软性，低驻波比，良好的屏蔽性能，精确的相位匹配。 在微波设备、无线通信设备系统和设备都有使用。 1.2品名:同轴线缆; 1.3型号:RF0.81/TC; 1.4规格:7/0.05SPC; 使用特性: 特性阻抗:50Ω 工作温度:-65°C---+200°C 工作湿度:＜90% 最小弯曲半径：5mm 2.电缆详细资料及结构图: 2.1结构图: 绝缘 内导体 外导体 护套 2.2电缆材质及尺寸: 项目单位材质及尺寸 内导体 材质/镀银铜线 根数/直径根/mm7/0.05±0.02 外径mmΦ0.15 绝缘 材质/TeflonFEP(聚全氟乙烯-丙烯树脂) 厚度mm0.13 完成外径mmΦ0.41±0.03 外导体 材质/镀锡铜线 形式/编织 构成/3*16/0.05mm 密度%≥93%(24目) 完成外径mmΦ0.63±0.05(仅供参考) 护套 材质/TeflonFEP(聚全氟乙烯-丙烯树脂) 厚度mm0.09 完成外径mmΦ0.81±0.05 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第6页共14页 护套颜色/灰色和黑色(也可按客户要求) 3.电缆特性 3.1机械及物理特性: 项目标准要求测试方法备注说明 内导体拉伸率≥20%GB4909 =（L1-L0）/L0×100% L1最终标距长度 L0原始标距长度 绝缘外观光滑/良好目测 绝缘材质比重2.14-2.19/根据材料特性 绝缘介电常数2.1×10 6 HZ/根据材料特性 护套外观光滑/良好目测/ 3.2电气性能 测试项目标准要求参照标准测试方法备注 绝缘电阻≥10MΩ.KmGB3048 500V交流 电持续 1min 电阻测试仪 最大承受压力8000N/// 介质耐压0.8KVGB3048 1KV交流电 持续1min 耐压测试仪 工作电压300VGB3048// 特性阻抗50±2ΩGB4098/ 网析分析仪、TRK测 试仪 电容96.65PF/MGB4098/数字电容仪 传输速率70%//网析分析仪 传输延迟4．8ns/m/// 最大工作频率1GHZ/// 屏蔽率减100dB/GB9023/ 阻燃性passedIEC332-3// 卤素特性passedICE754// 屏蔽衰减（db/m） 测试频率衰减 1000MHZ3.6 2000MHZ5.1 3000MHZ6.2 4000MHZ7.5 5000MHZ8.5 6000MHZ9.4 驻波比6000MHZ以下≤1.50GB9023/ 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第7页共14页 五、连接器参数 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第8页共14页 六、天线性能测试（配样机测试） 1 、驻波比图 2.回波损耗图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第9页共14页 2 、方向图（ 2D 及 3D 图） 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第10页共14页 3 、增益曲线图 4 、效率曲线图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第11页共14页 5 、增益 & 效率数值表 频率 Frequency(MHz) 效率 Efficiency(dBi) 增益 Gain(dBi) 效率 Efficiency(%) 2400.0-6.88-1.2720.51 2410.0-7.00-1.3019.95 2420.0-7.03-1.3419.83 2430.0-7.18-1.6219.15 2440.0-7.31-1.7818.60 2450.0-7.47-2.0017.91 2460.0-7.94-2.6016.09 2470.0-8.21-2.8215.11 2480.0-8.32-2.3814.73 2490.0-8.09-1.7515.54 2500.0-8.16-1.6115.27 5150.0-6.44-0.1422.72 5200.0-6.480.7622.50 5250.0-6.860.1720.59 5300.0-6.700.0321.36 5350.0-7.25-0.4218.85 5400.0-8.00-1.8515.85 5450.0-8.97-1.7312.68 5500.0-10.39-2.519.13 5550.0-10.99-4.087.96 5600.0-11.39-4.997.26 5650.0-10.83-3.748.26 5700.0-8.41-0.6314.42 5750.0-7.040.4119.77 5800.0-6.470.7722.54 5850.0-6.081.9224.64 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第12页共14页 七、可靠性测试报告 产品名称：2.4G&5.8G内置天线产品型号 GKZS-2.4&5.8G-F0241-RF0.81I-35 测试项目测试条件判定标准试验数判定 高温存储 80°C±2°C环境中放置 12H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；线材无破 损融化、气泡等现象；性能正常 5PCS合格 低温存储 -40°C±2°C环境中放置 12H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 温度循环 1、在-20°C的环境中放 置30分钟，在25°C的环 境中放置5分钟，在70°C 的环境中放置30分钟， 在25°C的环境中放置5 分钟 2、循环次数：5次； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 耐温热 在温度40°C±2°C，湿度 93±2%RH环境放置4H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 盐雾试验 在氯化钠溶液浓度5% （㎡），PH值6.5-7.2， 温度35°C±2°C湿 度>85%RH的密闭环境中 放置48小时 电缆头无氧化、发黄、发绿、红锈、 白锈等；性能正常 5PCS合格 试样前产品图：试样后产品图： 试验设备： 编制/日期：谢文婷/2025.07.16审核/日期：胡泽伟/2025.07.16 备注： 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第13页共14页 八、全尺寸测量报告 编号：GKZS-FM-G-20250716 零件型号： GKZS-2.4&5.8G-F0241-RF0.81I-35 零件名称： 2.4G&5.8G 内置天线 测量数量：5PCS测量日期：2025.07.16 产品尺寸图： 序号尺寸 / 规范 供应商测量结 果 测量工具 判定 12345合格不合格 130±5mm3031312930直尺OK 222.4±0.5mm22.522.622.422.522.6卡尺OK 325.56±0.5mm25.525.725.625.725.5卡尺OK 编制:胡梅娇审核:巢晓馨批准:胡泽伟 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第14页共14页 九、包装说明 1、100PCS/袋,5000pcs/袋，封口袋。 2、装纸箱，5000PCS/箱 (实际以出货数量为准) 3、内附出货检验报告， 在箱外侧面右上角贴标签，封口。 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3

广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第1页共14页 产品规格承认书 SpecificationForApproval 产品名称： ProductionName 2.4G&5.8G内置天线 产品型号： ProductionNumber GKZS-2.4&5.8G-F0241-RF0.81I-35 供应商： Supplier 广州市高科中实通信技术有限公司 供应商确认盖章(SupplierSignature) 工程师Engineer审核Checkedby批准Approvedby 何明卫巢晓馨胡泽伟 2025年09月28日2025年09月28日2025年09月28日 客户确认盖章(CustomerSignature) 工程师Engineer审核Checkedby批准Approvedby 年月日年月日年月日 注：客户确认盖章后，请将此承认书回传到我公司。 广州市高科中实通信技术有限公司 地址:中国广东省广州市从化区神岗广从南路22号 Tel:020-87080630/87080639/87080632 Fax:020-87080731 http://www.gkzs.com.cn 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第2页共14页 变更履历表 DescriptionRecord 版本 Version 修改内容 ContentRevised 创建者 Modifier 日期 Date A/0初始新建胡梅娇2025.07.16 A/1 FPC板丝印号由A1改A2原线长由35mm改 30mm 胡梅娇2025.07.25 A/2FPC板丝印号由A2版改A3版（性能优化）胡梅娇2025.09.01 A/3更新实物图胡梅娇2025.09.28 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第3页共14页 一、产品结构图纸（mm） 标记位置更改内容版本签名日期 图样名称 表面处理 第三视角： 审核 工艺 标准化 批准 产品型号 比例 图样编号 单位 mm 版本页次 材料 重量 设 计 广州市高科中实通信技术有限公司 1/1A0 混合 GKZS-2.4&5.8G-P0241-RF0.81I-35 2.4G&5.8G内置天线 注释： 1、外观等级：4 2 2 . 4 ± 0 . 5 25.56±0.5 R F 0 . 8 1 线 （ 黑 色 ） I P E X 头 （ 一 代 ） 30±5 F P C 板 G K - F 0 2 4 1 - A 3 二、产品实物图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第4页共14页 三、天线技术参数 厂家内部型号Ex：GKZS-2.4&5.8G-F0241-RF0.81I-35 类别Ex：2.4G&5.8G 频段Ex：2400-2500MHz5150-5850MHz 形态Ex：无源内置天线（FPC） 极化Ex：线极化 驻波Ex：≤7.0 效率Ex：15%(均值) 增益 Ex：-1.86dBi（均值）、-1.27dBi（峰值）@2400--2500MHz Ex：-1.06dBi（均值）、1.92dBi（峰值）@5150--5850MHz 接头类型Ex：IPEX（一代） 接头属性Ex：母头 有源/无源Ex：无源 天线尺寸Ex：25.56x22.4mm 馈线类型和尺寸Ex：RF0.81线(黑色）L=30mm 馈线损耗Ex：RF0.81线，100MHz/6000MHz:-10≤X<0 工作温度Ex：-40°C~80°C 功率容量Ex：33dBm 特性阻抗（R）Ex：50Ω 盐雾等级Ex：48H 重量(Weight)Ex：0.3g 备注Ex： 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第5页共14页 四、线材参数 1.产品描述 1.1适用于TeflonFEP绝缘系列柔软同轴电缆线。 产品特征：极好的柔软性，低驻波比，良好的屏蔽性能，精确的相位匹配。 在微波设备、无线通信设备系统和设备都有使用。 1.2品名:同轴线缆; 1.3型号:RF0.81/TC; 1.4规格:7/0.05SPC; 使用特性: 特性阻抗:50Ω 工作温度:-65°C---+200°C 工作湿度:＜90% 最小弯曲半径：5mm 2.电缆详细资料及结构图: 2.1结构图: 绝缘 内导体 外导体 护套 2.2电缆材质及尺寸: 项目单位材质及尺寸 内导体 材质/镀银铜线 根数/直径根/mm7/0.05±0.02 外径mmΦ0.15 绝缘 材质/TeflonFEP(聚全氟乙烯-丙烯树脂) 厚度mm0.13 完成外径mmΦ0.41±0.03 外导体 材质/镀锡铜线 形式/编织 构成/3*16/0.05mm 密度%≥93%(24目) 完成外径mmΦ0.63±0.05(仅供参考) 护套 材质/TeflonFEP(聚全氟乙烯-丙烯树脂) 厚度mm0.09 完成外径mmΦ0.81±0.05 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第6页共14页 护套颜色/灰色和黑色(也可按客户要求) 3.电缆特性 3.1机械及物理特性: 项目标准要求测试方法备注说明 内导体拉伸率≥20%GB4909 =（L1-L0）/L0×100% L1最终标距长度 L0原始标距长度 绝缘外观光滑/良好目测 绝缘材质比重2.14-2.19/根据材料特性 绝缘介电常数2.1×10 6 HZ/根据材料特性 护套外观光滑/良好目测/ 3.2电气性能 测试项目标准要求参照标准测试方法备注 绝缘电阻≥10MΩ.KmGB3048 500V交流 电持续 1min 电阻测试仪 最大承受压力8000N/// 介质耐压0.8KVGB3048 1KV交流电 持续1min 耐压测试仪 工作电压300VGB3048// 特性阻抗50±2ΩGB4098/ 网析分析仪、TRK测 试仪 电容96.65PF/MGB4098/数字电容仪 传输速率70%//网析分析仪 传输延迟4．8ns/m/// 最大工作频率1GHZ/// 屏蔽率减100dB/GB9023/ 阻燃性passedIEC332-3// 卤素特性passedICE754// 屏蔽衰减（db/m） 测试频率衰减 1000MHZ3.6 2000MHZ5.1 3000MHZ6.2 4000MHZ7.5 5000MHZ8.5 6000MHZ9.4 驻波比6000MHZ以下≤1.50GB9023/ 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第7页共14页 五、连接器参数 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第8页共14页 六、天线性能测试（配样机测试） 1 、驻波比图 2.回波损耗图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第9页共14页 2 、方向图（ 2D 及 3D 图） 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第10页共14页 3 、增益曲线图 4 、效率曲线图 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第11页共14页 5 、增益 & 效率数值表 频率 Frequency(MHz) 效率 Efficiency(dBi) 增益 Gain(dBi) 效率 Efficiency(%) 2400.0-6.88-1.2720.51 2410.0-7.00-1.3019.95 2420.0-7.03-1.3419.83 2430.0-7.18-1.6219.15 2440.0-7.31-1.7818.60 2450.0-7.47-2.0017.91 2460.0-7.94-2.6016.09 2470.0-8.21-2.8215.11 2480.0-8.32-2.3814.73 2490.0-8.09-1.7515.54 2500.0-8.16-1.6115.27 5150.0-6.44-0.1422.72 5200.0-6.480.7622.50 5250.0-6.860.1720.59 5300.0-6.700.0321.36 5350.0-7.25-0.4218.85 5400.0-8.00-1.8515.85 5450.0-8.97-1.7312.68 5500.0-10.39-2.519.13 5550.0-10.99-4.087.96 5600.0-11.39-4.997.26 5650.0-10.83-3.748.26 5700.0-8.41-0.6314.42 5750.0-7.040.4119.77 5800.0-6.470.7722.54 5850.0-6.081.9224.64 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第12页共14页 七、可靠性测试报告 产品名称：2.4G&5.8G内置天线产品型号 GKZS-2.4&5.8G-F0241-RF0.81I-35 测试项目测试条件判定标准试验数判定 高温存储 80°C±2°C环境中放置 12H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；线材无破 损融化、气泡等现象；性能正常 5PCS合格 低温存储 -40°C±2°C环境中放置 12H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 温度循环 1、在-20°C的环境中放 置30分钟，在25°C的环 境中放置5分钟，在70°C 的环境中放置30分钟， 在25°C的环境中放置5 分钟 2、循环次数：5次； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 耐温热 在温度40°C±2°C，湿度 93±2%RH环境放置4H； 各尺寸符合要求；外观无变形、脱 胶、生锈、水印等现象；性能正常 5PCS合格 盐雾试验 在氯化钠溶液浓度5% （㎡），PH值6.5-7.2， 温度35°C±2°C湿 度>85%RH的密闭环境中 放置48小时 电缆头无氧化、发黄、发绿、红锈、 白锈等；性能正常 5PCS合格 试样前产品图：试样后产品图： 试验设备： 编制/日期：谢文婷/2025.07.16审核/日期：胡泽伟/2025.07.16 备注： 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第13页共14页 八、全尺寸测量报告 编号：GKZS-FM-G-20250716 零件型号： GKZS-2.4&5.8G-F0241-RF0.81I-35 零件名称： 2.4G&5.8G 内置天线 测量数量：5PCS测量日期：2025.07.16 产品尺寸图： 序号尺寸 / 规范 供应商测量结 果 测量工具 判定 12345合格不合格 130±5mm3031312930直尺OK 222.4±0.5mm22.522.622.422.522.6卡尺OK 325.56±0.5mm25.525.725.625.725.5卡尺OK 编制:胡梅娇审核:巢晓馨批准:胡泽伟 广州市高科中实通信技术有限公司 GaokeAntCo.,Ltd. 第14页共14页 九、包装说明 1、100PCS/袋,5000pcs/袋，封口袋。 2、装纸箱，5000PCS/箱 (实际以出货数量为准) 3、内附出货检验报告， 在箱外侧面右上角贴标签，封口。 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3 I P G K - F 0 2 4 1 - A 3

informationWIFIBluetooth antenna type Passive built-in antenna（FPC） Passive ceramic antenna antenna gain Ex：-1.86dBi（average）、-1.27dBi（peak）@2400-- 2500MHz Ex：-1.06dBi（average）、1.92dBi（peak）@5150-- 5850MHz 2.29dBi antenna location antenna photos antenna spec antenna modelGKZS-2.4&5.8G-F0241-RF0.81I-35GKZS-2.4G-TC0502-J how antenna integrated IPEX SMD For more antenna information, please refer to the antenna datasheet TICO 6

informationWIFIBluetooth antenna type Passive built-in antenna（FPC） antenna gain Ex：-1.86dBi（average）、-1.27dBi（peak）@2400-- 2500MHz Ex：-1.06dBi（average）、1.92dBi（peak）@5150-- 5850MHz antenna location antenna photos antenna spec antenna modelGKZS-2.4&5.8G-F0241-RF0.81I-35 how antenna integrated IPEX For more antenna information, please refer to the antenna datasheet Bluetooth functionality is not configured ThOR 6 mini

版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 广州视琨电子科技有限公司 GuangzhouShikunElectronicTechnologyCompanyLimited SPECIFICATION SKI.WBM40S.1 IEEE802.11a/b/g/n/ac/ax1T1RUSB+SDIOWi-Fi IntegratedBluetooth2.1+EDR/3.0/4.x/5.3/5.4 ApprovedbyShikun CheckedbyRecheckedbyApprovedby 徐浩 Pleasesendtheoriginalbacktousafteryouhaveapprovedandsigned. Approvedbycustomer CommentsApprovedbyCompany’sseal Customer’sName: 版权CVTE所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。 REVISIONHISTORY VERSIONDATEBOARDIDPAGEDESCRIPTIONAUTHOR V1.02023.09.06 SKI.WBM40S.1 A23302 ALLFirstIssuedLvguitian V1.12023.11.13 SKI.WBM40S.1 A23302 ALLAddedVDDIOexternalpower supplyconfiguration Lvguitian V1.22024.1.6 SKI.WBM40S.1 A23302 ALLUpdatepackagingmaterial information Lvguitian V1.32024.06.28 SKI.WBM40S.1 A23302 ALLUpdatethemoisture sensitivitylevel Lvguitian V1.42024.07.25 SKI.WBM40S.1 A23302 ALLAddedproductionpart number Lvguitian V1.52025.05.23 SKI.WBM40S.1 A23302 ALLAddedproductionpart number Lvguitian V1.62025.06.04 SKI.WBM40S.1 A23302 4AddMICcertificationmarkLvguitian V1.72025.06.12 SKI.WBM40S.1 A23302 4Addedproductionpart number Lvguitian SKI.WBM40S.1 1 QR-ZZPJ-017A 版权CVTE…

Text truncated - open the document above for the full version.