2BLU9-QL14N45BMNotebook

M&M Electronics, S.A. (September 23, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BLU9-QL14N45BM [M&M Electronics, S.A.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Redwan Daggak M&M Electronics, S.A. (September 23, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BLU9-QL14N45BM [M&M Electronics, S.A.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Redwan Daggak

M&M Electronics, S.A. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [September 23, 2025] U.S. Agent Designation [M&M Electronics, S.A.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BLU9-QL14N45BM Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [M&M Electronics, S.A.]. [M&M Electronics, S.A.] with the FRN [0036174050] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Redwan Daggak] [Huiying Fan] [Director] [Director] [M&M Electronics, S.A.] [GLOCERTS TECHNOLOGY INC]

M&M Electronics, S.A. (September 23, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Notebook / QL14N45BM8128 / FCC ID: 2BLU9-QL14N45BM) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Redwan Daggak Title: Director

M&M Electronics, S.A. (September 23, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Redwan Daggak Title: Director

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 6 Model: QL14N45BM8128 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 6 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 6 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 6 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 5 of 6 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 6 of 6

FCC ID LABEL: Label Location: FCC ID: 2BLU9-QL14N45BM Model No.: QL14N45BM8128

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 53 TEST REPORT Compiled by: Reviewed by: Approved by: Zhang Mao cheng Martin Feng Rita Xiao / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Notebook FCC ID: 2BLU9-QL14N45BM Trademark: Model Number: QL14N45BM8128 Prepared For: M&M Electronics, S.A. Address: Cocosolito, Colon Free Zone, Main Entrance Warehouse 10D and 11D, Colon, Panama Manufacturer: Shenzhen Bmorn Technology Co., Ltd. Address: 20th floor, Wanting Building, Baoyuan Road, Bao'an District, Shenzhen, Guangdong, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jul. 09, 2025 Sample tested Date: Jul. 09, 2025 to Sep. 16, 2025 Issue Date: Sep. 16, 2025 Report No.: CTB25070901603RH05 Test Standards FCC 47 CFR Part2(2.1093), FCC 47 CFR Part1(1.1310) FCC 47 CFR Part1(1.1307), ANSI/IEEE C95.1-2019 IEEE 1528-2013 & Published RF Exposure KDB Procedures Test Results PASS Remark: This is SAR test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RH05 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 53 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 CONTENTS ...................................................................................................................................................................... 2 1. VERSION ................................................................................................................................................................ 4 2. PRODUCT INFORMATION AND TEST SETUP.............................................................................................. 5 2.1 PRODUCT INFORMATION .................................................................................................................................. 5 3 EQUIPMENT USED DURING TEST .................................................................................................................. 7 3.1 EQUIPMENT LIST .............................................................................................................................................. 7 3.2 TEST EQUIPMENT CALIBRATION ...................................................................................................................... 8 4 SAR INTRODUCTION.......................................................................................................................................... 9 4.1 INTRODUCTION ................................................................................................................................................ 9 4.2 SAR DEFINITION .............................................................................................................................................. 9 5 SAR MEASUREMENT SETUP .......................................................................................................................... 10 5.1 SAR MEASUREMENT SETUP ................................................................................................................... 10 5.2 DASY5 E-FIELD PROBE SYSTEM ................................................................................................................... 11 5.3 PROBE SPECIFICATION ................................................................................................................................... 11 5.4 ISOTROPIC E-FIELD PROBE ............................................................................................................................. 11 5.5 PHANTOMS ..................................................................................................................................................... 12 5.6 DEVICE HOLDER ............................................................................................................................................ 12 6 SAR TEST PROCEDURE ................................................................................................................................... 13 6.1 SCANNING PROCEDURE .................................................................................................................................. 13 6.2 EXTRAPOLATION ............................................................................................................................................ 16 6.3 TEST POSITION – BODY CONFIGURATIONS ..................................................................................................... 16 7 EXPOSURE LIMIT ............................................................................................................................................. 17 7.1 UNCONTROLLED ENVIRONMENT .................................................................................................................... 17 7.2 CONTROLLED ENVIRONMENT ........................................................................................................................ 17 8 SYSTEM AND LIQUID VALIDATION ............................................................................................................ 18 8.1 SYSTEM VALIDATION ...........................................................…

Text truncated - open the document above for the full version.

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 88 TEST REPORT Compiled by: Revie wed by: Approved by: Zhou Kui Arron Liu Bin Mei / Director Note: If there is any objec tion to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Notebook FCC ID: 2BLU9-QL14N45BM Trademark: Model Number: QL14N45BM8128 Prepared For: M&M Electronics, S.A. Address: Cocosolito, Colon Free Zone, Main Entrance Warehouse 10D and 11D, Colon, Panama Manufacturer: Shenzhen Bmorn Technology Co., Ltd. Address: 20th floor, Wanting Building, Baoyuan Road, Bao'an District, Shenzhen, Guangdong, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jul. 09, 2025 Sample tested Date: Jul. 09, 2025 to Sep. 12, 2025 Issue Date: Sep. 12, 2025 Report No.: CTB25070901603RF04 Test Standards FCC CFR Title 47 Part 15 Subpart E Section 15.407 Test Results PASS Remark: This is WIFI-5GHz band radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 88 TABLE OF CONTENT Test Report Declaration Page 1. VERSION .......................................................................................................................................... 3 2. TEST SUMMARY ............................................................................................................................. 4 3. MEASUREMENT UNCERTAINTY ................................................................................................... 5 4. PRODUCT INFORMATION AND TEST SETUP ............................................................................. 6 4.1 Product Information ............................................................................................................................ 6 4.2 Test Setup Configuration ................................................................................................................... 6 4.3 Support Equipment ............................................................................................................................ 6 4.5 Test Mode .......................................................................................................................................... 7 4.6 Test Environment ............................................................................................................................... 7 5. TEST FACILITY AND TEST INSTRUMENT USED ......................................................................... 9 5.1 Test Facility ........................................................................................................................................ 9 5.2 Test Instrument Used ......................................................................................................................... 9 6. AC POWER LINE CONDUCTED EMISSION ................................................................................ 12 6.1 Block Diagram Of Test Setup ........................................................................................................... 12 6.2 Limit .................................................................................................................................................. 12 6.3 Test procedure ................................................................................................................................. 12 6.4 Test Result ....................................................................................................................................... 14 7. RADIATED SPURIOUS EMISSIONS ............................................................................................ 16 7.1 Block Diagram Of Test Setup ........................................................................................................... 16 7.2 Limit .................................................................................................................................................. 16 7.3 Test procedure ................................................................................................................................. 17 7.4 Test Result ....................................................................................................................................... 18 8. BAND EDGE .................................................................................................................................. 23 8.1 Block Diagram Of Test Setup ........................................................................................................... 23 8.2 Limit .................................................................................................................................................. 23 8.3 Test procedure ................................................................................................................................. 23 8.4 Test Result ....................................................................................................................................... 24 9. CONDUCTED OUTPUT P O WER .................................................................................................. 32 9.1 Block Diagram Of Test Setup ..................................................................................................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 51 of 88 ANT2 802.11 a-518 0802.11 a-520 0 802.11a-5240802.11ac(VHT20)-5180 802.11ac(VHT20)-5200 802.11ac(VHT20)-5240 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 52 of 88 802.11ac(VHT40)-5190 802.11ac(VHT40)-5230 802.11ac(VHT80)-5210 802.11n(HT20)-5180 802.11n(HT20)-5200 802.11n(HT20)-5240 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 53 of 88 802.11n(HT40)-5190 802.11n(HT40)-5230 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 54 of 88 5745-5825MHz ANT 1: 802.11a-5745 802.11a-5785 802.11a-5825 802.11ac(VHT20)-5745 802.11ac(VHT20)-5785 802.11ac(VHT20)-5825 802.11ac(VHT40)-5755 802.11ac(VHT40)-5795 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 55 of 88 802.11ac(VHT80)-5775 802.11n(HT20)-5745 802.11n(HT20)-5785 802.11n(HT20)-5825 5802.11n(HT40)-5755 802.11n(HT40)-5795 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 56 of 88 ANT2: 802.11a-5745 802.11a-5785 802.11a-5825 802.11ac(VHT20)-5745 802.11ac(VHT20)-5785 802.11ac(VHT20)-5825 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 57 of 88 802.11ac(VHT40)-5755 802.11ac(VHT40)-5795 802.11ac(VHT80)-5775 802.11n(HT20)-5745 802.11n(HT20)-5785 802.11n(HT20)-5825 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 58 of 88 5802.11n(HT40)-5755 802.11n(HT40)-5795 Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 59 of 88 11. POWER SPECTRAL DENSITY 11.1 Block Diagram Of Test Setup 11.2 Limit (1) For the band 5.15-5.25 GHz. (iv) For mobile and portable client devices in the 5.15-5.25 GHz band, the maximum conducted output power over the frequency band of operation shall not exceed 250 mW provided the maximum antenna gain does not exceed 6 dBi. In addition, the maximum power spectral density shall not exceed 11 dBm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. (2) For the 5.25-5.35 GHz and 5.47-5.725 GHz bands, the maximum conducted output power over the frequency bands of operation shall not exceed the lesser of 250 mW or 11 dBm + 10 log B, where B is the 26 dB emission bandwidth in megahertz. In addition, the maximum power spectral density shall not exceed 11 dBm in any 1 megahertz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. (3) For the band 5.725-5.85 GHz, the maximum conducted output power over the frequency band of operation shall not exceed 1 W. In addition, the maximum power spectral density shall not exceed 30 dBm in any 500-kHz band. If transmitting antennas of directional gain greater than 6 dBi are used, both the maximum conducted output power and the maximum power spectral density shall be reduced by the amount in dB that the directional gain of the antenna exceeds 6 dBi. However, fixed point-to-point U-NII devices operating in this band may employ transmitting antennas with directional gain greater than 6 dBi without any corresponding reduction in transmitter conducted power. Fixed, point-to-point operations exclude the use of point-to-multipoint systems, omnidirectional applications, and multiple collocated transmitters transmitting the same information. The operator of the U-NII device, or if the equipment is professionally installed, the installer, is responsible for ensuring that systems employing high gain directional antennas are used exclusively for fixed, point-to-point operations. 11.3 Test procedure According to KDB789033 D02v02r01 sectionE, the following is the measurement procedure. For devices operating in the bands 5.15−5.25 GHz, 5.25−5.35 GHz, and 5.47−5.725 GHz, the preceding procedures make use of 1 MHz RBW to satisfy directly the 1 MHz reference bandwidth specified in Section 15.407(a)(5). For devices operating in the band 5.725−5.85 GHz, the rules specify a measurement bandwidth of 500 kHz. Many spectrum analyzers do not have 500 kHz RBW, thus a narrower RBW may need to be used. The rules permit the use of RBWs less than 1 MHz, or 500 kHz, “provided that the measured power is integrated over the full reference bandwidth” to show the total power over the specified measurement bandwidth (i.e., 1 MHz, or 500 kHz). If measurements are performed using a reduced resolution bandwidth (< 1 MHz, or < 500 kHz) and integrated over 1 MHz, or 500 kHz bandwidth, the following adjustments to the procedures apply: a) Set RBW ≥ 1/T, where T is defined in II.B.l.a). b) Set VBW ≥ 3 RBW. c) If measure ment band width of Maximum PSD is specified in 500 kHz, add 10 log (500 kHz/RBW) to the EUT Radio Test System Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901603RF04 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 60 of 88 measured result, whereas RBW (<500 kHz) is the reduced resolution bandwidth of the spectrum analyzer set during measurement. d) If measurement bandwidth of Maximum PSD is specified in 1 MHz, add 10 log (1MHz/RBW) to the measured result, whereas RBW (< 1 MHz) is the reduced resolution bandwidth …

Text truncated - open the document above for the full version.

Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Customer Name：Bmorn Project name：N14JP7-8821 WIFI module Date：2025.08.21 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Customer contact： Phone number： Email： Sward RF：Yangwende Phone number：176 7457 9060 Landline number：0755-29985185 Email：[email protected] Sward structure： Phone number： Landline number：0755-29985185 Email：[email protected] Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen 1.Project Overview Number of antennasMachine type 2Notebook computer Shell material：14 inch plastic shell 2.Antenna Overview Antenna number NameWorking frequency band/MHZMaterial 1WIFI&BT&5Gwifi2400MHz/2500MHz&5.8GHzFPC 1WIFI&BT&5Gwifi2400MHz/2500MHz&5.8GHzFPC Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Antenna position WIFI AUX WIFI MAIN Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI&BT MAIN S11 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI&BT MAIN Passive data Passive Test For 2.4G FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 33.74-4.72-0.67 2410 34.62-4.61-0.43 2420 39.52-4.030.26 2430 44.54-3.510.85 2440 46.91-3.291.11 2450 44.09-3.560.76 2460 45.97-3.380.7 2470 44.11-3.550.31 2480 46.31-3.340.76 2490 48.46-3.150.91 2500 48.26-3.160.96 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen 5GWIFI MAIN Passive data Passive Test For 5G-WIFI FreqEffiEffiGain (MHz)(%)(dB)(dBi) 5000 14.62-8.35-3.52 5100 20.48-6.89-2.43 5200 24.98-6.02-1.26 5300 30.96-5.09-0.81 5400 32.32-4.910.16 5500 25.82-5.88-0.85 5600 27.58-5.59-0.6 5700 28.43-5.46-0.44 5800 25.76-5.890.67 5900 28.07-5.52-0.35 6000 27.77-5.560.84 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI&BT AUX S11 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI&BT AUX Passive data Passive Test For 2.4G FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 32.92-4.82-0.86 2410 41.31-3.84-0.83 2420 37.72-4.23-0.05 2430 39.78-4-0.09 2440 33.94-4.690.11 2450 33.35-4.77-0.29 2460 34.04-4.680.14 2470 42.42-3.720.1 2480 44.55-3.510.5 2490 47.17-3.260.93 2500 42.02-3.771.28 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen 5GWIFI AUX Passive data Passive Test For 5G-WIFI FreqEffiEffiGain (MHz)(%)(dB)(dBi) 5000 36.45-4.38-0.43 5100 29.21-5.35-0.76 5200 33.19-4.79-0.12 5300 37.89-4.210.99 5400 50.34-2.982.77 5500 42.5-3.721.82 5600 35.45-4.50.52 5700 36.47-4.380.72 5800 34.68-4.60.93 5900 33.35-4.770.94 6000 34.02-4.681 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI Throughput testing Iperf Throughput testing Model WIFI module 8821 Software version Model number ChannelDistanceTest angle （TX）1min mean value （RX）1min mean value Number of packet drops 2.4GWIFI15 meters 0°64.5 Mbps93.1 Mbps0 90°63.8 Mbps95.6 Mbps0 096.4 Mbps66.7 Mbps180° 270°62.9 Mbps97.2 Mbps0 5GWIFI15 meters 0°238 Mbps304 Mbps0 90°244 Mbps311 Mbps0 0305 Mbps251 Mbps180° 270°240 Mbps308 Mbps0 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI Throughput testing（Test image） 2.4Gwifi Upload/Download Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI Throughput testing（Test image） 5Gwifi Upload/Download Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI Actual measurement image of signal strength Testing location：SWARD R&D Center Test time：14:00-14:30 Test distance：15 meters Signal strength：-50dBm~-41dBm Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Testing location：SWARD R&D Center Test time：14:00-14:30 Test distance：10 meters Signal strength：-39dBm~-36dBm WIFI Actual measurement image of signal strength Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Testing location：SWARD R&D Center Test time：14:00-14:30 Test distance：5 meters Signal strength：-33dBm~-30dBm WIFI Actual measurement image of signal strength Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Bluetooth test Actual test effect Machine No1 Testing environment SWARD R&D Center Test equipment AM08/HUAWEI Test distance≥10 meters Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Note: 1. This report is based on the actual debugging and testing of the prototype, including environmental treatment, antenna position, and assembly position of each component Cannot be changed arbitrarily; 2.If there are any changes in the materials used in the prototype, please promptly provide feedback to our company for further verification; 3. List of sensitive components: TP (Material, Coating, Wiring, etc.) Screen (amplifier circuit, LED, cable design, etc.) Shell material (antenna assembly method, structural interference, shell material, antenna position height and area, etc.) Motherboard (motherboard conduction, RF circuit matching, PA, dual power, filtering, LNA, power circuit, etc.) Camera, battery, motor MIC、 Fingerprint recognition module, etc 4. Due to the small number or only one sample testing machine, some probabilistic issues cannot be fully identified. It is recommended to conduct a small batch trial production before mass production to investigate the problem points (such as flashing screens, speaker noise, TP jump points, black screen crashes, signal drops, etc.)

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 1 Model: QL14N45BM8128 Body-Worn/Hotspot(Front side) Body-Worn/Hotspot( (Back side) Hotspot(Right edge) Hotspot(Top edge) Hotspot(Bottom edge) 0mm separation distance 0mm separation distance 0mm separation distance 0mm separation distance 0mm separation distance

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: Q…

Text truncated - open the document above for the full version.