2BLU9-QL15BMNotebook

M&M Electronics, S.A. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 [September 12, 2025] U.S. Agent Designation [M&M Electronics, S.A.] acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought FCC ID: 2BLU9-QL15BM Name and company of U.S. agent: [GLOCERTS TECHNOLOGY INC] Physical U.S. address of agent: [19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507] FRN of U.S. agent: [0036339737] Email address of U.S. agent: [[email protected]] Telephone of U.S.agent: (626) 588-8039 [GLOCERTS TECHNOLOGY INC] acknowledges their obligation to accept service of process on behalf of [M&M Electronics, S.A.]. [M&M Electronics, S.A.] with the FRN [0036174050] accepts its obligation to maintain an agent for service of process in the United States for no less than 1 year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission- related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Signature Signature [Redwan Daggak] [Huiying Fan] [Director] [Director] [M&M Electronics, S.A.] [GLOCERTS TECHNOLOGY INC]

M&M Electronics, S.A. (September 11, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BLU9-QL15BM [M&M Electronics, S.A.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Redwan Daggak M&M Electronics, S.A. (September 11, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BLU9-QL15BM [M&M Electronics, S.A.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Redwan Daggak

M&M Electronics, S.A. Model Difference Data：September 11, 2025 Product description: Notebook Model name: QL15I5BM8256, QL15I3BM8256, QL15R7BM16512 Trade Name: FCC ID: 2BLU9-QL15BM All the model are the same circuit and RF module, only the name, CPU and appearance colors are different. Regards Sincerely Client’s signature : Client’s name / title : Redwan Daggak（Director） Contact information / address：Cocosolito, Colon Free Zone, Main Entrance Warehouse 10D and 11D, Colon, Panama

M&M Electronics, S.A. (September 11, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Notebook / QL15I5BM8256, QL15I3BM8256, QL15R7BM16512 / FCC ID: 2BLU9-QL15BM) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☒ No required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Signature: Name: Redwan Daggak Title: Director

M&M Electronics, S.A. (September 11, 2025) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTB Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Signature: Name: Redwan Daggak Title: Director

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 9 External Photos Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 9 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 3 of 9 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 4 of 9 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 5 of 9 Model: QL15I5BM8256 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 6 of 9 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 7 of 9 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 8 of 9 Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 9 of 9

FCC ID LABEL: Label Location: FCC ID: 2BLU9-QL15BM Model No.: QL15I5BM8256

Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 53 TEST REPORT Compiled by: Reviewed by: Approved by: Zhang Mao cheng Martin Feng Rita Xiao / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Notebook FCC ID: 2BLU9-QL15BM Trademark: Model Number: QL15I5BM8256, QL15I3BM8256, QL15R7BM16512 Prepared For: M&M Electronics, S.A. Address: Cocosolito, Colon Free Zone, Main Entrance Warehouse 10D and 11D, Colon, Panama Manufacturer: Shenzhen Bmorn Technology Co., Ltd. Address: 20th floor, Wanting Building, Baoyuan Road, Bao'an District, Shenzhen, Guangdong, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jul. 09, 2025 Sample tested Date: Jul. 09, 2025 to Sep. 04, 2025 Issue Date: Sep. 04, 2025 Report No.: CTB25070901601RH05 Test Standards FCC 47 CFR Part2(2.1093), FCC 47 CFR Part1(1.1310) FCC 47 CFR Part1(1.1307), ANSI/IEEE C95.1-2019 IEEE 1528-2013 & Published RF Exposure KDB Procedures Test Results PASS Remark: This is SAR test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901601RH05 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 53 Contents Page 1 COVER PAGE ........................................................................................................................................................................... 1 CONTENTS ......................................................................................................................................................................... 2 1. VERSION .................................................................................................................................................................. 4 2. PRODUCT INFORMATION AND TEST SETUP............................................................................................... 5 2.1 PRODUCT INFORMATION ................................................................................................................................... 5 3 EQUIPMENT USED DURING TEST ................................................................................................................... 7 3.1 EQUIPMENT LIST ............................................................................................................................................... 7 3.2 TEST EQUIPMENT CALIBRATION ....................................................................................................................... 8 4 SAR INTRODUCTION ........................................................................................................................................... 9 4.1 INTRODUCTION .................................................................................................................................................. 9 4.2 SAR DEFINITION ............................................................................................................................................... 9 5 SAR MEASUREMENT SETUP ........................................................................................................................... 10 5.1 SAR MEASUREMENT SETUP .................................................................................................................... 10 5.2 DASY5 E-FIELD PROBE SYSTEM .................................................................................................................... 11 5.3 PROBE SPECIFICATION ..................................................................................................................................... 11 5.4 ISOTROPIC E-FIELD PROBE .............................................................................................................................. 11 5.5 PHANTOMS ...................................................................................................................................................... 12 5.6 DEVICE HOLDER .............................................................................................................................................. 12 6 SAR TEST PROCEDURE .................................................................................................................................... 13 6.1 SCANNING PROCEDURE ................................................................................................................................... 13 6.2 EXTRAPOLATION ............................................................................................................................................. 16 6.3 TEST POSITION – BODY CONFIGURATIONS ...................................................................................................... 16 7 EXPOSURE LIMIT ............................................................................................................................................... 17 7.1 UNCONTROLLED ENVIRONMENT ..................................................................................................................... 17 7.2 CONTROLLED ENVIRONMENT .......................................................................................................................... 17 8 SYSTEM AND LIQUID VALIDATION .......................................................................................................…

Text truncated - open the document above for the full version.

Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Customer Name：Bmorn Project name：N15LPG-8821 WIFI module Date：2025.08.07 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Customer contact： Phone number： Email： Sward RF：Yangwende Phone number：176 7457 9060 Landline number：0755-29985185 Email：[email protected] Sward structure： Phone number： Landline number：0755-29985185 Email：[email protected] Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen 1.Project Overview Number of antennasMachine type 2Notebook computer Shell material：15 inch plastic shell 2.Antenna Overview Antenna number NameWorking frequency band/MHZMaterial 1WIFI&BT&5Gwifi2400MHz/2500MHz&5.8GHzFPC 1WIFI&BT&5Gwifi2400MHz/2500MHz&5.8GHzFPC Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Antenna position WIFI AUX WIFI MAIN Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI&BT MAIN S11 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI&BT MAIN Passive data Passive Test For 2.4G FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 40.05-3.972.9 2410 40.88-3.893.02 2420 43.07-3.663.25 2430 47.08-3.273.63 2440 48.14-3.183.88 2450 43.39-3.633.33 2460 42.51-3.713.33 2470 37.16-4.32.56 2480 39.21-4.072.68 2490 41.58-3.812.84 2500 45.88-3.383.02 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen 5GWIFI MAIN Passive data Passive Test For 5G-WIFI FreqEffiEffiGain (MHz)(%)(dB)(dBi) 5000 37.91-4.211.56 5100 40.61-3.912.22 5200 38.78-4.112.3 5300 42.11-3.761.37 5400 50.91-2.932.68 5500 43.82-3.582.87 5600 45.54-3.423.08 5700 46.51-3.322.11 5800 57.71-2.393.25 5900 41.71-3.81.98 6000 50.22-2.991.63 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI&BT AUX S11 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI&BT AUX Passive data Passive Test For 2.4G FreqEffiEffiGain (MHz)(%)(dB)(dBi) 2400 36.42-4.392.98 2410 37.95-4.212.93 2420 38.2-4.182.7 2430 39.87-3.992.62 2440 39.94-3.992.2 2450 43.05-3.662 2460 44.45-3.521.51 2470 41.39-3.830.99 2480 38.74-4.120.57 2490 39.2-4.070.36 2500 41.65-3.80.32 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen 5GWIFI AUX Passive data Passive Test For 5G-WIFI FreqEffiEffiGain (MHz)(%)(dB)(dBi) 5000 50.33-2.981.33 5100 53.6-2.712.04 5200 51.51-2.881.61 5300 60.02-2.222.68 5400 57.86-2.383.59 5500 59.95-2.223.77 5600 47.41-3.242.76 5700 54.46-2.643.31 5800 55.35-2.573.35 5900 51.42-2.892.52 6000 48.18-3.171.76 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI Throughput testing Iperf Throughput testing Model WIFI module 8821 Software version Model number ChannelDistanceTest angle （TX）1min mean value （RX）1min mean value Number of packet drops 2.4GWIFI15 meters 0°56.7 Mbps75.9 Mbps0 90°61.9 Mbps71.7 Mbps0 075.9 Mbps64.1 Mbps180° 270°57.4 Mbps72.3 Mbps0 5GWIFI15 meters 0°230 Mbps351 Mbps0 90°224 Mbps349 Mbps0 0348 Mbps215 Mbps180° 270°221 Mbps346 Mbps0 Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI Throughput testing（Test image） 2.4Gwifi Upload/Download Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI Throughput testing（Test image） 5Gwifi Upload/Download Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen WIFI Actual measurement image of signal strength Testing location：SWARD R&D Center Test time：14:00-14:30 Test distance：15 meters Signal strength：-50dBm~-41dBm Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Testing location：SWARD R&D Center Test time：14:00-14:30 Test distance：10 meters Signal strength：-42dBm~-38dBm WIFI Actual measurement image of signal strength Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Testing location：SWARD R&D Center Test time：14:00-14:30 Test distance：5 meters Signal strength：-35dBm~-33dBm WIFI Actual measurement image of signal strength Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Bluetooth test Actual test effect Machine No1 Testing environment SWARD R&D Center Test equipment AM08/HUAWEI Test distance≥10 meters Building B, Hexi Hangcheng Industrial Zone, No. 135 Qianjin No. 2 Road, Baoan District, Shenzhen Note: 1. This report is based on the actual debugging and testing of the prototype, including environmental treatment, antenna position, and assembly position of each component Cannot be changed arbitrarily; 2.If there are any changes in the materials used in the prototype, please promptly provide feedback to our company for further verification; 3. List of sensitive components: TP (Material, Coating, Wiring, etc.) Screen (amplifier circuit, LED, cable design, etc.) Shell material (antenna assembly method, structural interference, shell material, antenna position height and area, etc.) Motherboard (motherboard conduction, RF circuit matching, PA, dual power, filtering, LNA, power circuit, etc.) Camera, battery, motor MIC、 Fingerprint recognition module, etc 4. Due to the small number or only one sample testing machine, some probabilistic issues cannot be fully identified. It is recommended to conduct a small batch trial production before mass production to investigate the problem points (such as flashing screens, speaker noise, TP jump points, black screen crashes, signal drops, etc.)

Report Tel: 4008-707-283Web: http://www.ctb-lab.net Page 1 of 56 TEST REPORT Compiled by: Reviewed by: Approved by: Zhou Kui Arron Liu Bin Mei / Director Note: If there is any objection to the inspection results in this report, please submit a written report to the company within 15 days from the date of receiving the report. The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen CTB Testing Technology Co., Ltd. this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. “*” indicates the testing items were fulfilled by subcontracted lab. “#” indicates the items are not in CNAS accreditation scope. Product Name: Notebook FCC ID: 2BLU9-QL15BM Trademark: Model Number: QL15I5BM8256, QL15I3BM8256, QL15R7BM16512 Prepared For: M&M Electronics, S.A. Address: Cocosolito, Colon Free Zone, Main Entrance Warehouse 10D and 11D, Colon, Panama Manufacturer: Shenzhen Bmorn Technology Co., Ltd. Address: 20th floor, Wanting Building, Baoyuan Road, Bao'an District, Shenzhen, Guangdong, China Prepared By: Shenzhen CTB Testing Technology Co., Ltd. Address: 1&2/F., Building A, No.26, Xinhe Road, Xinqiao, Xinqiao Street, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: Jul. 09, 2025 Sample tested Date: Jul. 09, 2025 to Sep. 01, 2025 Issue Date: Sep. 01, 2025 Report No.: CTB25070901601RF02 Test Standards FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Results PASS Remark: This is Bluetooth radio test report. Shenzhen CTB Testing Technology Co., Ltd. Report No.: CTB25070901601RF02 Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 56 TABLE OF CONTENT Test Report Declaration Page 1. VERSION ........................................................................................................................................................ 4 2. TEST SUMMARY .......................................................................................................................................... 5 3. MEASUREMENT UNCERTAINTY............................................................................................................. 6 4. PRODUCT INFORMATION AND TEST SETUP ..................................................................................... 7 4.1 Product Information .................................................................................................................................................... 7 4.2 Test Setup Configuration .......................................................................................................................................... 7 4.3 Support Equipment ..................................................................................................................................................... 7 4.4 Channel List .................................................................................................................................................................. 8 4.5 Test Mode ...................................................................................................................................................................... 8 4.6 Test Environment ........................................................................................................................................................ 8 5. TEST FACILITY AND TEST INSTRUMENT USED ................................................................................ 9 5.1 Test Facility ................................................................................................................................................................... 9 5.2 Test Instrument Used ................................................................................................................................................. 9 6. AC POWER LINE CONDUCTED EMISSION .......................................................................................... 12 6.1 Block Diagram Of Test Setup ................................................................................................................................ 12 6.2 Limit ............................................................................................................................................................................... 12 6.3 Test procedure ........................................................................................................................................................... 12 6.4 Test Result .................................................................................................................................................................. 14 7. RADIATED SPURIOUS EMISSION ........................................................................................................ 16 7.1 Block Diagram Of Test Setup ................................................................................................................................ 16 7.2 Limit ............................................................................................................................................................................... 16 7.3 Test procedure ........................................................................................................................................................... 17 7.4 Test Result .................................................................................................................................................................. 18 8. BAND EDGE AND RF COUNDUCTED SPURIOUS EMISSIONS..................................................... 27 8.1 Block Diagram Of Test Setup ................................................................................................................................ 27 8.2 Limit ...................................................................…

Text truncated - open the document above for the full version.

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 1 Model: QL15I5BM8256 Body-Worn/Hotspot(Front side) Body-Worn/Hotspot( (Back side) Hotspot(Right edge) Hotspot(Top edge) 0mm separation distance 0mm separation distance 0mm separation distance 0mm separation distance

Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 1 of 2 Model: QL15I5BM8256 Radiated Emission Below 1G Above 1G Shenzhen CTB Testing Technology Co., Ltd. Report Tel: 4008-707-283 Web: http://www.ctb-lab.net Page 2 of 2 Conducted emissions