2BMPX-K10Dash Camera

Please read this instruction manual carefully before use and keep it for future reference. User Manual DUAL-CHANNEL DASHCAM FANTTIK LUMA K10 APEX - 01 - Table of Contents 1. Product Parts & Interface 1.1 LED Indicator Guide 1.2 Buttons & Touchscreen Controls 1.3 Screen Icons & Status 1.4 Specs 1.5 FCC WARNING 01~05 2. Installation Guide 2.1 MicroSD Card Instructions 2.2 Formatting the MicroSD Card 2.3 Installing the Front Camera 2.4 Installing the Rear Camera 2.5 Installation & Usage Precautions (Disclaimer) 06~11 4. Managing Your Videos 4.1 Playback on Dash Cam 4.2 Playback via App 4.3 File Storage Guide (For PC Access) 14~08 5. Using the Mobile App 5.1 Connecting to the Fanttik App 5.2 App Interface Overview 01~08 6. Firmware Update 01~08 7. Warranty CustomerSupport01~08 3. How to Use 3.1 Initial Setup & App Download 3.2 Menu Settings & Safety Tips 3.3 Powering On/Off 3.4 Recording Modes Explained 3.5 Quick Controls (Snapshot / Mic / Switch Views) 3.6 System Settings (Video / Display / Time) Loop Recording (Daily Mode) Emergency Recording (Locked Mode) Parking Monitoring (Requires Hardwire Kit) 11~14 Table of Contents What's in the Box 3. How to Use 1.Overview 1.1 LED Indicator Guide Cable Routing Tool x1 Dash Cam x1 2.4 Installing the Rear Camera 2.3 Installing the Front Camera 2.2 Formatting the MicroSD Card 3.1 Initial Setup Removing the MicroSD Card Rear Camera x1 Rear Camera Cable x1 Car Charger x1 3M Adhesive Mounts x1 Electrostatic Stickers x2 - 02 - 1 2 3 4 1 2 4 3 Speaker MicroSD Card Slot Front Lens Reset Button 1 2 3 4 Rear Lens Connection Port 1 2 Rear Status LED 3 12 Power / Data Port 4 Rear Camera Port 5 Back / Screen-off Button Menu / Select Dial Microphone 1 2 3 Status LED 5 5 5 3 - 03 - Device Component Dash Cam (Main Unit) Rear Camera Device Status Power On / System Boot The "REC" icon turns red. Solid Green LED Recording Parking Mode Emergency Recording App Connected Firmware Update Normal OperationSolid Red LED Pulsing Green LED Pulsing Red LED Solid Blue LED Solid Purple LED Fast Flashing Red LED - - - - - - Indicator Light Behavior Screen Display 1.2 Buttons Touchscreen Controls Operation Method Control Dial Back Button Touchscreen Applicable Screen On the Live View Screen In the Menu Enter the Settings MenuPress Rotate Press Press Press Press and Hold Swipe Down Tap Tap Press and Hold Rotate On the Live View Screen In the Menu On the Live View Screen In the Menu Go back to the previous page Turn off the screen Enter the Settings Menu Hide / Show screen icons Select / Enter settings Digital Zoom in / out Confirm / Select Turn off the screen Hide screen icons (Clean View) Scroll up / down through options Interaction Action Function Performance 1.3 Screen lcons Status 1.4 Specs 1.5 FCC WARNING - 04 - REC2000-01-01 00:00:00 Audio is on Icon Name Recording Status Standby Date / Time GPS Status Wi-Fi Status Screen Display REC Flashing Recording 2000-01-01 00:00:00 Not Recording - Solid Blue LED Wi-Fi is enabled Searching for GPS signal Status Description Solid Icon On - 05 - 2. Installation Guide - 06 - Ensure the dash cam is turned off. Gently press the edge of the Micro SD card inward. It will pop out, allowing you to remove it easily. Important MicroSD Card Guidelines Requirements: A MicroSD card is not included and must be purchased separately. You must use a High Endurance MicroSD card. The dash cam supports capacities up to 512GB. Recommended Brand: We highly recommend purchasing a Fanttik industrial-grade High Endurance MicroSD card. It is specifically designed for continuous read/write cycles, ensuring superior stability and durability. Routine Formatting: To maintain optimal read/write performance, we recommend formatting your MicroSD card regularly. Data Backup: Formatting will permanently delete all data on the card. Always back up your important videos before formatting. Important Safety Notes Settings Pause Recording: To ensure optimal system performance, the dash cam will automatically stop recording when you enter the sub-menus. Recording will automatically resume as soon as you exit the settings and return to the Live View screen. Park Before Operating: For your safety, strictly operate the device only when the vehicle is safely parked. The manufacturer assumes no responsibility for any accidents or injuries caused by operating the dash cam while driving. Hardware Requirement: This feature requires continuous power and must be used with the Fanttik OBD Hardwire Kit. This specific hardwire kit features a built-in low-voltage protection module to effectively prevent draining your car battery. Go to Menu > enable Installation Guide Lines, then return to the live view screen. Adjust the lens until the on-screen guide lines align perfectly with the horizon ahead to achieve the optimal viewing angle. Pro Tip for Alignment - 07 - The MicroSD card must be formatted before its first use (FAT32 or exFAT formats are recommended). When you insert a new card and turn on the device, a "Format" prompt may appear on the screen. Simply tap confirm to proceed. First-Time Use: Step 1 | Choose a Location Step 1 | Choose a Location Step 2 | Clean the Surface Step 3 | Apply the Electrostatic Sticker On the Dash Cam: Go to Menu > General > Format SD Card, and follow the on-screen prompts. Via the App: Turn on Wi-Fi in the dash cam menu and connect your phone to the Fanttik App. Go to the App's Settings menu and select Format SD Card. Formatting Manually When turning on the dash cam for the first time, please follow the on-screen prompts to set the date and time. We highly recommend scanning the QR code on the screen with your smartphone to download the companion App for a smoother initial setup experience. 4. Managing Your Videos 4.1 Playback on the Dash Cam This product is covered by a 12-month warranty for manufacturing defects. Go to Menu > Album (or Gallery) to categorize, view, play, or delete Loop Recordings, Emergency Videos, Parking Monitoring videos, and Snapshots. 4…

Text truncated - open the document above for the full version.

METASEELLC 2026/04/16 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestforFCCID:2BMPX-K10 [METASEELLC](“theapplicant”)certifiesthattheequipmentforwhichauthorization issoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, Name:LITINGTING METASEELLC 2026/04/16 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestforFCCID:2BMPX-K10 [ METASEELLC ](“theapplicant”)certifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredListasanentityproducing “covered”equipment. Sincerely, Name:LITINGTING

METASEELLC U.S.AgentDesignationforServiceofProcess (ApplicantandU.S.AgentareSeparateParties) TO:FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 ATTENTION:FCCCertification–Section2.911(d)(7)Information DesignatedU.S.Agent CompanyName:METASEELLC Address:12GREENWAYPLZSTE1161AHOUSTON,TX77046-1203 FRN:0036394138 ContactName:LITINGTING Tel.:13510859302 Email:[email protected] Thisletteristoconfirmthatwe(“theDesignatedU.S.Agent”)haveacceptedtheresponsibilitytoactasthe DesignatedU.S.AgentforServiceofProcessasrequiredbysection47CFR2.911(d)(7)onbehalfofthe Applicantnotedbelow. U.S.AgentSignature: Date:2026/04/16 Signedby(PrintedName/Title):LITINGTING TheApplicantacknowledgesthattheymustmaintainanagentfornolessthanoneyearafterterminatingall marketingandimportationORtheconclusionofanyCommission-relatedproceedinginvolvingthe equipment.TheapplicantfurtheracknowledgestheirresponsibilitytoinformtheFCCwheneverthe DesignatedU.S.Agentinformationabovechanges. Applicant Companyname:METASEELLC GranteeCode:2BMPX FCCID:2BMPX-K10 ContactName:LITINGTING StreetAddress: 12GREENWAYPLZSTE1161AHOUSTON,TX77046-1203 TelephoneNo:13510859302 Email: [email protected] FRN:0036394138 ApplicantSignature: Date:2026/01/16 Signedby(PrintedName/Title):LITINGTING

METASEELLC 2026/04/16 EurofinsElectricalandElectronicTestingNA,Inc. 914W.PatapscoAvenue Baltimore,MD21230 USA RE:CONFIDENTIALITYREQUESTFOR ProductName:DashCamera FCCID:2BMPX-K10 Model(s):LumaK10Apex,LumaK10Ultra,LumaK10,LumaK10Pro ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe -BlockDiagram -Schematics -OperationalDescription requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublic review. Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Client’ssignature: Client’sname/title:LITINGTING Contactinformation/address:METASEELLC/12GREENWAYPLZSTE1161A HOUSTON,TX77046-1203

METASEELLC 2026/04/16 EurofinsElectricalandElectronicTestingNA,Inc. 914W.PatapscoAvenue Baltimore,MD21230 USA RE:LETTEROFAGENTAUTHORIZATION ProductName:DashCamera FCCID:2BMPX-K10 Model(s):LumaK10Apex,LumaK10Ultra,LumaK10,LumaK10Pro ToWhomItMayConcern: We,theundersigned,herebyauthorizeShenzhenSTSTestServicesCo.,Ltd.toactonourbehalf inallmattersrelatingtoapplicationforequipmentauthorization,includingthesigningofall documentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, Client’ssignature: Client’sname/title:LITINGTING Contactinformation/address:METASEELLC/12GREENWAYPLZSTE1161A HOUSTON,TX77046-1203

Declarationonmodeldifference Wetheundersignedherebyconfirmthatanyofourproductionunitsbearingthefollowingmodel numbersareidenticalincircuitryandelectrical,mechanicalandphysicalconstruction;Thedifference isonlyinmodelnames. ProductionnameTradenameModelno. DashCameraN/ALumaK10Apex,LumaK10Ultra,LumaK10,LumaK10Pro Signature:Date:2026/04/20 Name:LITINGTING Title: Company:METASEELLC

External Photos

Internal Photos ANT

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.: STS2603355H01 Issued for METASEE LLC 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Product Name: Dash Camera Brand Name: Fanttik Model Name: Luma K10 Apex Series Model(s): N/A FCC ID: 2BMPX-K10 Test Standard: FCC 47CFR §2.1091 Page 2 of 7 Report No.: STS2603355H01 TEST REPORT Applicant’s Name ................. : METASEE LLC Address ................................. : 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Manufacturer's Name ........... : METASEE LLC Address ................................. : 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Product Description Product Name ........................ : Dash Camera Brand Name ........................... : Fanttik Model Name .......................... : Luma K10 Apex Series Model(s) ...................... : N/A Test Standards ..................... : FCC 47CFR §2.1091 447498 D01 Interim General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 2026-03-16 Date (s) of performance of tests ........................................................ : 2026-03-16 to 2026-04-03 Date of Issue .......................................... : 2026-04-03 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 7 Report No.: STS2603355H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1091 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 7 Page 4 of 7 Report No.: STS2603355H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 2026-04-03 STS2603355H01 ALL Initial Issue Page 5 of 7 Report No.: STS2603355H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Dash Camera Brand Name Fanttik Model Name Luma K10 Apex Series Model(s) N/A Model Difference N/A Product Description The EUT is Dash Camera Operation Frequency: IEEE 802.11a/ n(HT20)/ac(VHT20)/ax(HE20): 5.180GHz-5.240GHz IEEE 802.11n(HT40)/ac(VHT40)/ax(HE20): 5.190GHz-5.230GHz Modulation Type: 802.11a(OFDM): BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM): BPSK,QPSK,16-QAM,64-QAM 802.11ac(OFDM): BPSK,QPSK,16-QAM,64-QAM,256-QAM 802.11ax(OFDM, OFDMA): BPSK,QPSK,16-QAM,64-QAM,256-QAM, 1024QAM Antenna Type: Internal antenna Antenna Gain: 4.83dBi Power Rating DC 12V Adapter N/A Battery N/A Hardware Version N/A Software Version N/A 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 7 Report No.: STS2603355H01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 300 - 1500 -- -- F/300 3.0-30 1842/f 4.89/f *(900/f²) 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 300 - 1500 -- -- F/1500 1.34-30 824/f 2.19/f *(180f²) 1500 – 100000 -- -- 1.0 F= Frequency in MHz Friss Formula Friss Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. Page 7 of 7 Report No.: STS2603355H01 2.3 TEST RESULT Tune up Mode Detector Tune up Power 5GWIFI PK 11±1dBm Multiple transmission: 5GWIFI=0.0096＜1 Note: 1. The Maxinum power is less than the limit, complies with the exemption requirements. 2. The Bluetooth and WLAN can’t simultaneous transmission at the same time. 3. ERP = EIRP - 2.15 ※※※※※END OF THE REPORT※※※※※ Protocol Fre. (GHz) Separati on distance (cm) Max Tune up power (dBm) ANT Gain (dBi) Max EIRP (dBm ) Max EIRP (mW) Power Density (mW/cm²) Limit (mW/ cm²) Ratio Result 5GWIFI 5240 20 12 4.83 16.83 48.195 0.0096 1 0.0096 Pass

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2603355W01 Issued for METASEE LLC 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Product Name: Dash Camera Brand Name: Fanttik Model Name: Luma K10 Apex Series Model(s): Luma K10 Ultra,Luma K10,Luma K10 Pro FCC ID: 2BMPX-K10 Test Standards: FCC Part15.407 Page 2 of 35 Report No.: STS2603355W01 TEST REPORT Applicant’s Name ................. : METASEE LLC Address ................................. : 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Manufacturer's Name ........... : METASEE LLC Address ................................. : 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Product Description Product Name ........................ : Dash Camera Brand Name ........................... : Fanttik Model Name .......................... : Luma K10 Apex Series Model(s) .................... : Luma K10 Ultra,Luma K10,Luma K10 Pro Test Standards ..................... : FCC Part15.407 Test Procedure ............................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 2026-03-16 Date (s) of performance of tests ............. : 2026-03-16 to 2026-04-03 Date of Issue .......................................... : 2026-04-03 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 35 Report No.: STS2603355W01 Table of Contents Page 1 . SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 11 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 11 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 RADIATED EMISSION AND MEASUREMENT 15 4. POWER SPECTRAL DENSITY TEST 26 4.1 LIMIT 26 4.2 TEST PROCEDURE 26 4.3 DEVIATION FROM STANDARD 27 4.4 TEST SETUP 27 4.5 EUT OPERATION CONDITIONS 27 4.6 TEST RESULTS 27 5. DUTY CYCLE 28 5.1 TEST STANDARD 28 5.2 TEST PROCEDURE 28 5.3 DEVIATION FROM STANDARD 28 5.4 TEST SETUP 28 5.5 EUT OPERATION CONDITIONS 28 5.6 TEST RESULTS 28 6. BANDWIDTH MEASUREMENT 29 6.1 EMISSION BANDWIDTH (EBW) 26 BANDWID PROCEDURES / LIMIT 29 6.2 OCCUPIED BANDWIDTH ( 99%) TEST APPLIED PROCEDURES / LIMIT 30 6.3 MINIMUM EMISSION BANDWIDTH(6 DB) PROCEDURES / LIMIT 31 7. MAXIMUM OUTPUT POWER 32 7.1 LIMIT 32 7.2 TEST PROCEDURE 32 7.3 DEVIATION FROM STANDARD 32 Page 4 of 35 Report No.: STS2603355W01 Table of Contents Page 7.4 TEST SETUP 32 7.5 EUT OPERATION CONDITIONS 32 7.6 TEST RESULTS 32 8. AUTOMATICALLY DISCONTINUE TRANSMISSION 33 8.1 LIMIT OF AUTOMATICALLY DISCONTINUE TRANSMISSION 33 8.2 TEST RESULT OF AUTOMATICALLY DISCONTINUE TRANSMISSION 33 9. ANTENNA REQUIREMENT 34 9.1 STANDARD REQUIREMENT 34 9.2 EUT ANTENNA 34 Page 5 of 35 Report No.: STS2603355W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 2026-04-03 STS2603355W01 ALL Initial Issue Page 6 of 35 Report No.: STS2603355W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: § 15.407,KDB 789033 D02 General U-NII Test Procedures New Rules v02r01 FCC Part 15.407 FCC standard Test Item Results 15.207 AC Conducted Emission N/A 15.407 (a) /15.407 (e) 26dB/6dB &99% Bandwidth PASS 15.407(a) Maximum Conducted Output Power PASS 15.407(b)/15.209 Radiated Emission And (bandedge Emissions) Measurement PASS 15.407(a) Power Spectral Density PASS 15.407(c) Automatically Discontinue Transmission PASS 15.203/15.204 Antenna Requirement PASS Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. (3) This sample belongs to the DC vehicle-mounted product and is not applicable to this project. Page 7 of 35 Report No.: STS2603355W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add.: 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 35 Report No.: STS2603355W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Dash Camera Brand Name Fanttik Model Name Luma K10 Apex Series Model(s) Luma K10 Ultra,Luma K10,Luma K10 Pro Model Difference The main model and subsequent models tested in this test differ only in naming. All other aspects, including materials, other manufacturing processes circuit design, and manufacturers, are exact…

Text truncated - open the document above for the full version.

品优创新技术有限公司 第1页共10页 SampleConfirmationForm Supplier：HuizhouJinguCommunicationTechnologyCo.,Ltd ProductionName：WIFIDual-bandAntenna MaterialSpecifications：WIFIAntenna/2.4G&5.8G/Dual-bandAntenna/L=55mm CustomerP/N：115000186 SampleSubmissionDate：2026-02-02 Quantityofsamplessent：3PCS Confirmsampletype： □Electroniccomponent□PCB□PCBA□Lens□LCD □Plasticpart□Hardware□Screwsandnuts□Wire □Packagingmaterials☑OtherAntenna SupplierCategory：☑Cooperatedsuppliers□Newsupplier□Customer designatedsupplier RoHS:☑YES□NO Doyouprovidethefollowingdocuments： ☑Partsdrawing☑Specificationdocument☑Appearanceandsize inspectionreport□MaterialTestingReport□Surfacetreatment inspectionreport☑Performanceandreliabilitytestingreport □ROHSInspectionReport☑LetterofAcknowledgment□Other Documentvalidityperiod ：□threemonths□sixmonths□ayear□ twoyears☑Permanent JudgmentresultSignatureconfirmation/date □QualifiedR&D □NO.qualifiedQuality □ConditionalacceptancePurchase □OtherCustomer HuizhouJinguCommunicationTechnologyCo.,Ltd. 第2页共10页 SpecificationForApproval Supplier HuizhouJinguCommunicationTechnologyCo.,Ltd CustomerP/N 115000186 ProductionName WIFIDual-bandAntenna ProductionNumber JG-WIFI-F1513-55 SupplierSignature EngineerCheckedbyApprovedby jojosunnyjacky February2,2026February2,2026February2,2026 CustomerSignature EngineerCheckedbyApprovedby Date ： Date ： Date ： Note:Afterthecustomerconfirmsandstampsthisdocument,pleasereturntheacknowledgmenttoourcompany. Companyname:HuizhouJinguCommunicationTechnologyCo.,Ltd Addressofthefactory:No.3,3rdFloor,BuildingA,Liangwu13,No.5BaiyunRoad,Shuicheng,HuiyangDistrict, HuizhouCity Contactperson ： WeiQiaolingmobilephone ： 18927480411 HuizhouJinguCommunicationTechnologyCo.,Ltd. 第3页共10页 DescriptionRecord SerialNumber 2026020202 VersionNumber A/0 ProductType JG-WIFI-F1513-55 ProductNumber WIFIDual-bandAntenna MaterielNumber / NO:VersionnumberDescriptionBeforeModificationDescriptionAfterModificationDate 1A/0Initialcreationjojo 2026-02-02 HuizhouJinguCommunicationTechnologyCo.,Ltd. 第4页共10页 1.Physicalpictureoftheproduct 2.Productstructuraldimensiondrawing(unit:mm) mark position change content version Signature Pattern Name surface treatment third-person perspective： review workman ship standar dization approve Product Model proportion Drawing number unit mm version page number material weight design Huizhou Jingu Communication Technology Co., Ltd 1/1 混合 JG-WIFI-F1513-55 A0 WIFI Dual-band Antenna ③ ② ① J G - W I F I - F 1 5 1 3 5 5 ± 5 1 2 . 5 ± 0 . 5 15±0.5 FPC （black） RF0.81 cable IPEX3 A/R 3 2 1 No. 1 1 Material Specifications Quantity unit Wire Connector FPC black ROHS IPEX3 RF0.81，50Ω,black,OD0.81mm，ROHS mm PCS PCS Note: 1:Frequency: 2.4&5.8 GHz 2:Standing wave ratio: ≤ 4.0 3:Working temperature -20 °C~+70 °C 4:Storage temperature -20 °C~+70 °C 5:The finished product must undergo 100% full inspection and be OK HuizhouJinguCommunicationTechnologyCo.,Ltd. 第 5 页共 10 页 3.Antennacharacteristics RangeofReceivingFrequencyEx：2400-2500MHz、5150-5850MHz PolarizationEx：linearpolarization V.S.W.R(inCenterFrequency)Ex：≤4.0 efficiency Ex：≥10%@2.4G ≥25%@2.4G Dain Ex：-3.06dBi（average）、-2.50dBi（peak）@2.4G 3.13dBi（average）、4.83dBi（peak）@5.8G ConnectorTypeEx：IPEX3 active/passiveEx：passive SizeEx：15x12.5mm CableSpecificationsanddimensionsEx：RF0.81cable(black)55mmlong OperatingTemperatureEx：-20°C~70°C HuizhouJinguCommunicationTechnologyCo.,Ltd. 第 6 页共 10 页 4.SpecificationsofRF0.81Wire ProductTypeRF081/50 StructureDrawing StructureCharacteristics Structure Item标准值StandardValue InnerConductor MaterialTinnedCopperWire Construction(mm) 0.15 Nom.Dia(mm) 0.15±0.02 Insulation Material FEP Nom.Dia(mm) 0.41±0.02 OuterConductor MaterialTinnedCopperWire16*3/0.05 Nom.Dia(mm) 0.60±0.05 CoverageRatio(%) 90±5 Jacket Material FEP Nom.Dia(mm) 0.81±0.05 ElectricalCharacteristics ItemStandardValueItemFrequencyStandardValue Impedanc(Ω)50±2 Attenuation@20 °C (dB/m) 1GHz3.10 Capacitance(pF/m)982GHz4.70 Velocity(%)703GHz5.80 VSWR≤[email protected] Max.OperatingVoltage(V)10005GHz7.80 Max.Operating Frequency(GHz) 66GHz8.50 Dependability Min.BendingRadius/Singlemm4 Min.BendingRadius/Repeatedmm8 OperatingTemperature°C-55-+200 Packing PackingModePaperyReel TheLengthofEachReel(m)1000 HuizhouJinguCommunicationTechnologyCo.,Ltd. 第 7 页共 10 页 5.ConnectorSpecifications HuizhouJinguCommunicationTechnologyCo.,Ltd. 第 8 页共 10 页 6.PerformanceTestDiagram(MatchingPrototypeTest) 6.1.StandingWaveRatio(SWR)Chart&ReturnLoss(RL)Chart 6.2.DirectionalMap(2D&3D) HuizhouJinguCommunicationTechnologyCo.,Ltd. 第 9 页共 10 页 6.3.Efficiencycurve 6.4.GainCurve HuizhouJinguCommunicationTechnologyCo.,Ltd. 第 10 页共 10 页 7.Finishedproductinspectionreport P/N 115000186 Examination date 2026-02-02 Disadvantage level CR:0 MA：0.4MI：0.65 Product Nameand Specificat ions JG-WIFI-F1513-55 BatchsizePCS / Accept/Reject 0/10/10/1 Order number / Numberof samplesPCS 全检 Defectcount 000 Samplingmethod:MIL-STD-105EClassIIinspectioncriteria ☐ CR:0MA0.65MI:1.5 ☒ CR:0MA:0.4MI:0.65 Inspectionbasis:FinishedProductInspectionSpecifications,EngineeringDrawings,CustomerRequirements,andSamples project Inspection content examinationrequirementsresult CRMAMI panel 1.Appearance 1.Noexposedcoppertracesordamage,withclearscreen printing. OK termin al 1.Deformation1.Nodeformation,rupture,orcompressioninjury OK 2.Oxidation2.Nooxidationorcontamination OK wire stock 1.WireOD 1.Thewirespecificationscomplywiththeengineering drawingsrequirements OK 2.Wire appearance 2.Noscratches,pressureinjuries,orcontamination OK else surface 1.Nodamage,deformation,discoloration,dirt,burr,or poorelectroplating OK solderingtin 2.Nodefectssuchasincompletewelding,falsewelding, solderbeads,orcorewirebifurcation OK pack mannerof packing 1.Complieswithdrawings,packagingspecifications,or customerrequirements OK project specifications mm measuring apparatus actualobservationrecord result CRMAMI 12345 ei g h t i n c A 55±5 steelrule 5556575657OK B 12.5 ± 0.5 callipers 12.612.612.512.612.6OK C 15±0.5 callipers 15.115.115.215.115.2OK D E OQC as…

Text truncated - open the document above for the full version.

Report: STS2603355W01 Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT a 5180 Ant1 98.01 0 0.19 NVNT a 5200 Ant1 97.42 0.11 0.19 NVNT a 5240 Ant1 96.89 0.14 0.19 NVNT n20 5180 Ant1 97.83 0.1 0.2 NVNT n20 5200 Ant1 95.47 0.2 0.2 NVNT n20 5240 Ant1 96.3 0.16 0.2 NVNT n40 5190 Ant1 92.34 0.35 0.41 NVNT n40 5230 Ant1 95.63 0.19 0.41 NVNT ac20 5180 Ant1 97.68 0.1 0.2 NVNT ac20 5200 Ant1 98.11 0 0.2 NVNT ac20 5240 Ant1 95.47 0.2 0.2 NVNT ac40 5190 Ant1 84.32 0.74 0.41 NVNT ac40 5230 Ant1 95.65 0.19 0.41 NVNT ax20 5180 Ant1 97.18 0.12 0.26 NVNT ax20 5200 Ant1 93.41 0.3 0.26 NVNT ax20 5240 Ant1 98.46 0.07 0.2 NVNT ax40 5190 Ant1 93.24 0.3 0.52 NVNT ax40 5230 Ant1 96.5 0.15 0.52 Report: STS2603355W01 Test Graphs Duty Cycle NVNT a 5180MHz Ant1 Duty Cycle NVNT a 5200MHz Ant1 Report: STS2603355W01 Duty Cycle NVNT a 5240MHz Ant1 Duty Cycle NVNT n20 5180MHz Ant1 Report: STS2603355W01 Duty Cycle NVNT n20 5200MHz Ant1 Duty Cycle NVNT n20 5240MHz Ant1 Report: STS2603355W01 Duty Cycle NVNT n40 5190MHz Ant1 Duty Cycle NVNT n40 5230MHz Ant1 Report: STS2603355W01 Duty Cycle NVNT ac20 5180MHz Ant1 Duty Cycle NVNT ac20 5200MHz Ant1 Report: STS2603355W01 Duty Cycle NVNT ac20 5240MHz Ant1 Duty Cycle NVNT ac40 5190MHz Ant1 Report: STS2603355W01 Duty Cycle NVNT ac40 5230MHz Ant1 Duty Cycle NVNT ax20 5180MHz Ant1 Report: STS2603355W01 Duty Cycle NVNT ax20 5200MHz Ant1 Duty Cycle NVNT ax20 5240MHz Ant1 Report: STS2603355W01 Duty Cycle NVNT ax40 5190MHz Ant1 Duty Cycle NVNT ax40 5230MHz Ant1 Report: STS2603355W01 Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Duty Factor (dB) Total Power (dBm) Limit (dBm) Verdict NVNT a 5180 Ant1 10.68 0 10.68 24 Pass NVNT a 5200 Ant1 10.67 0.11 10.78 24 Pass NVNT a 5240 Ant1 11.45 0.14 11.59 24 Pass NVNT n20 5180 Ant1 10.93 0.1 11.03 24 Pass NVNT n20 5200 Ant1 10.63 0.2 10.83 24 Pass NVNT n20 5240 Ant1 11.45 0.16 11.61 24 Pass NVNT n40 5190 Ant1 10.53 0.35 10.88 24 Pass NVNT n40 5230 Ant1 11.31 0.19 11.5 24 Pass NVNT ac20 5180 Ant1 10.69 0.1 10.7…

Text truncated - open the document above for the full version.