2BMPX-NEST10ULTRAImmersive Neck Massager

Thank You for Choosing the Bluvol Immersive Neck Massager Please read this manual carefully before use to ensure proper operation and optimal performance. WARRANTY Your Warranty includes 12-Month Coverage WARNINGS: To ensure correct and safe use of this product and to prevent personal injury or property damage, please carefully read all instructions and warning notices in the manual before use. · · · · · · · · · · Do not use with the following medical devices to avoid malfunction that may pose a life-threatening risk: · · · The following individuals are prohibited from using the product: · · · · Within 12 months of purchase, we will provide timely and effective online after-sales service. This product is not suitable for use by persons (including children) with reduced physical, sensory, or mental capa- bilities, or lack of experience and knowledge, unless they are supervised or instructed regarding the safe use of the product by a person responsible for their safety. Children should be supervised to ensure they do not play with the product. The appliance has heated surfaces. Persons with reduced sensitivity to heat must exercise caution when using it. Do not use in flammable or explosive atmospheres, such as gasoline stations, high-dust workshops, or areas with - 01 - 1. Vitality High-intensity, frequent direction shifts – relieves fatigue 2. Soothing Low-intensity, few direction shifts – gentle relaxation 3. Shiatsu High-intensity, variable directions – relieves stress 4. Kneading Variable intensity, layered kneading – quick refreshment 5. Heat Therapy Improve blood circulation and relieve neck muscle tension and pain. - 02 - - 03 - - 04 - · · The following individuals are prohibited from using the product: · · · · · · · · · combustible gases. Do not use the product while it is charging. Use the product only after charging is complete and the charging cable has been unplugged. This product contains a lithium-ion battery. Do not disas- semble, modify, immerse in water, or throw into fire. Do not puncture the product with sharp objects or subject it to strong impacts. Discontinue use and consult a doctor if you experience any physical discomfort during or after use. Do not use near the heart, on areas with skin diseases, or other affected areas. Do not plug or unplug the charging cable with wet hands, as this may lead to electric shock or other accidents. Implanted medical electronic devices, such as cardiac pacemakers; Life-sustaining medical electronic devices, such as artificial heart-lung machines; Medical electronic devices, such as electrocardiographs. Patients with malignant tumors; Patients with bleeding tendencies; Pregnant or postpartum women; Patients with acute suppurative inflammation; Users of cardiac pacemakers; Patients with metal implants. Patients currently under medical treatment who are experiencing physical abnormalities; Patients with cardiac or cerebrovascular disorders; Patients during a feverish period; Patients with infectious diseases; Patients with impaired skin sensation or skin abnormalities Patients currently taking medication; Patients with abnormal blood pressure; Patients unable to freely express their own will; Patients with impaired sensation due to severe peripheral circulatory disorders, such as those caused by diabetes. Before the first use, please charge the product for about 4 hours to fully charge it. This product is designed for neck use. Please wear it symmetrically on the left and right sides. Ensure no hard objects (e.g., necklaces, zippers, buttons) 1. 2. 3. The massager features 360° immersive spatial audio; Bluetooth turns on automatically when powered on. Search for "Bluvol" on your device (phone/tablet/lap- top/smart TV) to connect, and play audio after hearing the voice prompt "connected". Functions such as pause, switch, play, and volume adjustment must be operated on the connected device (phone/tablet/laptop/smart TV). Troubleshooting connection issues: Ensure all devices (phone/tablet/laptop/smart TV) have Bluetooth enabled and are within 1 meter; If the product is connected to another device, long-press the Heat Button to clear Bluetooth pairing and reconnect. Notes · · · · Except professionals, no one shall attempt toremove the battery! Remove the battery out of the appliance before scrappingthe appliance; The appliance must be disconnected from power supplybefore removing the battery; The battery should be disposed of safely. Please observe local environmental protection laws andwaste disposal guidance and protect the environment. Massage Modes360°Immersive Spatial Audio and Bluetooth connection          [email protected] Immersive Neck Massager NO Bluvol Bluvol Nest 10 Ultra ≤1m Bluetooth searchable upon power-on. Long Press 2s to clear Bluetooth pairing history 4.The massager disconnects automatically when over 10 meters from the device, and reconnects automatically when back within 10 meters. Indicator Light Status Guide Usage scenarios Indicator Light Status During use Red blinking Light is offPower off Operating Charging Cyan steady Cyan breathing Fully ChargedLight is off mmersive Neck Massager Status While charging Low battery. Please charge. MAINTENANCE AND CARE 1. 2. 3. 4. Before cleaning this product, always disconnect the power supply and do not touch the plug with wet hands. This product can be wiped but not washed the massage components, control panel and other parts are strictly prohibited from contact with water. Keep the product away from fire sources, oil stains, corro- sive liquids and other adverse environments. Store it in a dry and well-ventilated place, far from direct sunlight, high temperatures and humidity. This product is suitable for transportation by car, train, ship, airplane and other means. Avoid extrusion, severe vibration, collision, rolling and falling during transit. If the product has not been used for a long time, please charge it in advance before reusing…

Text truncated - open the document above for the full version.

METASEE LLC 2026.01.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2BMPX-NEST10ULTRA [METASEE LLC] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) LI TINGTING METASEE LLC 2026.01.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2BMPX-NEST10ULTRA [METASEE LLC] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) LI TINGTING

METASEE LLC 2026.01.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Immersive Neck Massager MODEL: Nest 10 Ultra, Nest 10 Pro, Nest 11 Ultra, Nest 11 Pro, Nest 12 Ultra, Nest 12 Pro, Master 10 Ultra, Master 10 Pro, Master 11 Ultra, Master 11 Pro, Master 12 Ultra, Master 12 Pro Trademark: Bluvol FCC ID: 2BMPX-NEST10ULTRA To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title: LI TINGTING / Manager Contact information / address: 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203

METASEE LLC 2026.01.13 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize SHENZHEN STS TEST SERVICES CO.,LTD. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title: LI TINGTING / Manager Contact information / address: 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203

METASEE LLC Model Difference 2026-01-13 EUT NAME: Immersive Neck Massager MODEL: Nest 10 Ultra, Nest 10 Pro, Nest 11 Ultra, Nest 11 Pro, Nest 12 Ultra, Nest 12 Pro, Master 10 Ultra, Master 10 Pro, Master 11 Ultra, Master 11 Pro, Master 12 Ultra, Master 12 Pro Trademark: Bluvol FCC ID: 2BMPX-NEST10ULTRA All the model are the same circuit and RF module, except model names and the shell appearance of color. Regards Sincerely Client’s signature: Client’s name / title: LI TINGTING / Manager Contact information / address: 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046- 1203

External Photos

Size:60*30m FCC ID: 2BMPX-NEST10ULTRA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Label Location

Internal Photos Antenna

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.: STS2512533H01 Issued for METASEE LLC 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Product Name: Immersive Neck Massager Brand Name: Bluvol Model Name: NEST 10 ULTRA Series Model(s): Nest 10 Pro, Nest 11 Ultra, Nest 11 Pro, Nest 12 Ultra, Nest 12 Pro, Master 10 Ultra, Master 10 Pro, Master 11 Ultra, Master 11 Pro, Master 12 Ultra, Master 12 Pro FCC ID: 2BMPX-NEST10ULTRA Test Standards: FCC 47CFR §2.1093 Page 2 of 8 Report No.: STS2512533H01 TEST REPORT Applicant’s Name ................. : METASEE LLC Address ................................. : 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Manufacturer's Name ........... : METASEE LLC Address ................................. : 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Product Description Product Name ........................ : Immersive Neck Massager Brand Name .......................... : Bluvol Model Name .......................... : NEST 10 ULTRA Series Model(s) ...................... : Nest 10 Pro, Nest 11 Ultra, Nest 11 Pro, Nest 12 Ultra, Nest 12 Pro, Master 10 Ultra, Master 10 Pro, Master 11 Ultra, Master 11 Pro, Master 12 Ultra, Master 12 Pro Test Standards ..................... : FCC 47CFR §2.1093 447498 D01 Interim General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 2025-12-09 Date (s) of performance of tests ............. : 2025-12-10 to 2025-12-22 Date of Issue .......................................... : 2025-12-30 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 8 Report No.: STS2512533H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 8 Page 4 of 8 Report No.: STS2512533H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 2025-12-30 STS251253H01 ALL Initial Issue Page 5 of 8 Report No.: STS2512533H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Immersive Neck Massager Brand Name Bluvol Model Name NEST 10 ULTRA Series Model(s) Nest 10 Pro, Nest 11 Ultra, Nest 11 Pro, Nest 12 Ultra, Nest 12 Pro, Master 10 Ultra, Master 10 Pro, Master 11 Ultra, Master 11 Pro, Master 12 Ultra, Master 12 Pro Model Difference All the model are the same circuit and RF module, except model names. Product Description The EUT is Immersive Neck Massager Operation Frequency: BT: 2402-2480MHz Modulation Type: BT: GFSK(1Mbps), π/4-DQPSK(2Mbps) Antenna gain: -0.58dBi Antenna Designation: PCB Antenna Power Rating DC 3.7V Adapter N/A Battery TL-SYC-3500mAh Hardware Version N/A Software Version N/A 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 8 Report No.: STS2512533H01 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in KDB 447498 D01 General RF Exposure Guidance v06 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Page 7 of 8 Report No.: STS2512533H01 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Page 8 of 8 Report No.: STS2512533H01 2.3 TEST RESULT Maximum measured transmitter power. Worst Case Mode frequency Maximum Output Power Tune up tolerance Max Tune up GHz dBm dBm dBm π/4-DQPSK (BT) 2.441 1.32 1±1 2 Evaluation Result Mode Frequency Antenna Distance RF output power including tune up (dBm) SAR Test Exclusion Threshold SAR Test Exclusion Estimated SAR GHz mm dBm mw π/4-DQPSK (BT) 2.441 5 2 1.58 0.49524 Yes / Note: 1. Remark: The worst case gain of the antenna is -0.58dBi. 2. Threshold at which no SAR required is 0.49524≤ 3.0 for 1-g SAR, Separation distance ≤ 5mm. ※※※※※END OF THE REPORT※※※※※

Inverted F Antenna Specification Summary ITEMANT SPEC Model Name 2.4G ANT HorizontalVertical 2400MHz 2 450MHz2500MHz2400MHz 2 450MHz 2500MHz Center Frequency -1.26-0.76-0.58-5.25-2.46-1.86 MAX. Gain -0.58dBi PolarizationHorizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2512533W01 Issued for METASEE LLC 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Product Name: Immersive Neck Massager Brand Name: Bluvol Model Name: Nest 10 Ultra Series Model(s): Nest 10 Pro, Nest 11 Ultra, Nest 11 Pro, Nest 12 Ultra, Nest 12 Pro, Master 10 Ultra, Master 10 Pro, Master 11 Ultra, Master 11 Pro, Master 12 Ultra, Master 12 Pro FCC ID: 2BMPX-NEST10ULTRA Test Standards: FCC Part15.247 Page 2 of 80 Report No.: STS2512533W01 TEST REPORT Applicant’s Name ................. : METASEE LLC Address .................................. : 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Manufacturer's Name ........... : METASEE LLC Address .................................. : 12 GREENWAY PLZ STE 1161A HOUSTON, TX 77046-1203 Product Description Product Name ........................ : Immersive Neck Massager Brand Name ........................... : Bluvol Model Name ........................... : Nest 10 Ultra Series Model(s) .................... : H26, H28, H32, H39, X56, C10, C20, C30, C40, C50, U100, U200, U300, U400, U500, AP10, AP25, AP50, AP70, AP85, AP99, RX12, RX34, RX56, RX78, RX89, TB12, TB31, TB52, TB75, TB86, TB99 Standards ............................. : FCC Part15.247 Test Procedure ....................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ............................... : Date of receipt of test item ......... : 2025-12-09 Date (s) of performance of tests : 2025-12-10 to 2025-12-22 Date of Issue ............................. : 2025-12-30 Test Result ................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 80 Report No.: STS2512533W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 10 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 11 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 13 2.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 14 2.7 EQUIPMENTS LIST 15 RF RADIATION TEST EQUIPMENT 15 3. EMC EMISSION TEST 16 3.1 CONDUCTED EMISSION MEASUREMENT 16 3.2 RADIATED EMISSION MEASUREMENT 20 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 33 4.1 LIMIT 33 4.2 TEST PROCEDURE 33 4.3 TEST SETUP 33 4.4 EUT OPERATION CONDITIONS 34 4.5 TEST RESULTS 34 5. NUMBER OF HOPPING CHANNEL 35 5.1 LIMIT 35 5.2 TEST PROCEDURE 35 5.3 TEST SETUP 35 5.4 EUT OPERATION CONDITIONS 35 5.5 TEST RESULTS 35 6. AVERAGE TIME OF OCCUPANCY 36 6.1 LIMIT 36 6.2 TEST PROCEDURE 36 6.3 TEST SETUP 36 6.4 EUT OPERATION CONDITIONS 36 6.5 TEST RESULTS 36 7. HOPPING CHANNEL SEPARATION MEASUREMEN 37 Page 4 of 80 Report No.: STS2512533W01 Table of Contents Page 7.1 LIMIT 37 7.2 TEST PROCEDURE 37 7.3 TEST SETUP 37 7.4 EUT OPERATION CONDITIONS 37 7.5 TEST RESULTS 37 8. BANDWIDTH TEST 38 8.1 LIMIT 38 8.2 TEST PROCEDURE 38 8.3 TEST SETUP 38 8.4 EUT OPERATION CONDITIONS 38 8.5 TEST RESULTS 38 9. OUTPUT POWER TEST 39 9.1 LIMIT 39 9.2 TEST PROCEDURE 39 9.3 TEST SETUP 40 9.4 EUT OPERATION CONDITIONS 40 9.5 TEST RESULTS 40 10. ANTENNA REQUIREMENT 41 10.1 STANDARD REQUIREMENT 41 10.2 EUT ANTENNA 41 APPENDIX 1-TEST DATA 42 DWELL TIME 42 MAXIMUM CONDUCTED OUTPUT POWER 49 -20DB BANDWIDTH 53 CARRIER FREQUENCIES SEPARATION 57 NUMBER OF HOPPING CHANNEL 61 BAND EDGE 63 BAND EDGE(HOPPING) 68 CONDUCTED RF SPURIOUS EMISSION 73 APPENDIX 2-PHOTOS OF TEST SETUP 80 Page 5 of 80 Report No.: STS2512533W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 2025-12-30 STS2512533W01 ALL Initial Issue Page 6 of 80 Report No.: STS2512533W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time PASS -- 15.247(a)(1) Bandwidth PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 80 Report No.: STS2512533W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2BMPX-NEST10ULTRA Setup photo AC Conduction RE (Below 1GHz) Page 2 of 2 FCC ID: 2BMPX-NEST10ULTRA RE (Above 1GHz)