2BNTC-SMPB68Wireless Power Bank

JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCCwithin 30 days via the granting TCB. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 6/4/202 U.S. Agent Designation JMTEKTECHNOLOGY(ZHONGSHAN) CO.,LTDacknowledges their consent for thefollowing contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2BNTC-SMPB68): TACWA, LLC acknowledges their obligation to accept service of process on behalf of JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD with the FRN 0036690592 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is Name and company of U.S. agent:TACWA, LLC Phys ical U.S. address of agent:5143 Evan Ct SE Aubrun, WA 98092 United States FRN of U.S. agent:0033491978 Email address of U.S. agent:[email protected] Contact Phone: (253) 508-7326 later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature [Name]&LFL-LDQJ [Title]*0 [Company] JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Signature [Name of U.S. agent]Tai Ly [Title of U.S. agent] Manager [Company of U.S. agent] Tacwa, LLC 48_[model] US_Agent_2.911 (d)(7) - U, V04



Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Grantee code: 2BNTC FCC ID: 2BNTC-SMPB68 FRN: 0036690592 Contact Name: Cici Jiang Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, China Telephone No:13760699244 Fax No: / Email: [email protected] i. [JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: June 18, 2026 Applicant’s Name: Cici Jiang Title: GM Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A Device Wireless Power Bank Company name JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Grantee code 2BNTC FCC ID 2BNTC-SMPB68 FRN 0036690592 Contact name Cici Jiang Address 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, China Telephone number 13760699244 E-mail [email protected] Chipset/module information IP5356, CP0003 Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 3 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher N/A 3 RAM: 1 GB N/A 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software 4 Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Cici Jiang Date: June 18, 2026 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

JMTEKTECHNOLOGY(ZHONGSHAN)CO.,LTD ProductSimilarityDeclaration Productname:WirelessPowerBank Modelname:SMPB68,SMPB68B,SMPB68G FCCID:2BNTC-SMPB68 We(JMTEKTECHNOLOGY(ZHONGSHAN)CO.,LTD)herebystate thatallthemodelsareelectricalidenticalincludingthesamesoftware parameterandhardwaredesign(i.e.,circuitdesign,PCBLayout,RF module/circuit,antennatype(s)andantennalocation,componentson PCB,etc.,),samemechanicalstructureanddesign(includingproduct enclosure,materials,etc.,),theonlydifferenceisthemodelname. Signature: Name:CiciJiang Title:GM 2026-06-17

TCB CALL página 1 File FCC ID: 2BNTC-SMPB68 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. TCB CALL página 2 On the official register from : https:www.sos.wa.gov/corps TCB CALL página 3 TCB CALL página 4 In google: Office: TCB CALL página 5 Licence: TCB CALL página 6 Other: TCB CALL página 7 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed1_US_Agent_Letter" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "C5266091_X23_Ed1_US_Agent_Letter" >

C5266091_X10_Ed.2 1/1 JMTEKTECHNOLOGY(ZHONGSHAN)CO.,LTD OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 Date:2026-06-18 Subject:RequestforConfidentiality FCCID: 2BNTC-SMPB68 ToWhomItMayConcern, PursuanttotheprovisionsofSections0.457and0.459ofCommission'srules (47CFR0.457,0.459),wearerequestingtheCommissiontowithholdthefollowing attachment(s)asconfidentialdocumentfrompublicdisclosure. ExhibitsLong-Term Confidentiality Short-TermConfidentiality NOTE2 IDLabel/LocationNoNo AttestationStatementNoNo ExternalPhotosNo ☒ BlockDiagram ☒☐ Schematics ☒☐ TestReportNoNo TestSetupPhotosNo ☒ User’sManual ☐ NOTE 1 ☒ InternalPhotos ☐ NOTE 1 ☒ PartsList/TuneUp ☐☐ RFExposureInfoNoNo OperationalDescription ☒☐ CoverLetter(s)NoNo SDRSoftware/SecurityInfo ☐ No NOTE1:Long-TermConfidentialitymaybepermittedunderspecialconditions(SeeII.LONG-TERMCONFIDENTIALITY,Section3of KDB726920,uselastinforce) NOTE2:Short-TermConfidentialitycanberequestedforamaximumof180daysfromthedateofthegrant. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Incaseofshort-termConfidentiality,theapplicantrequeststheexhibitsselected abovearewithheldfrompublicviewforaperiodof___180___daysfromthedateof theGrantofEquipmentAuthorizationandpriortomarketing. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Sincerely, C5266091_X10_Ed.2 1/1 Signature: Name:CiciJiang Title:GM 2026.06.17

C5266091_X8_Ed.1 1/1 Letter of Authorization JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Company: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, China Product Name: Wireless Power Bank Model Number: SMPB68. SMPB68B, SMPB68G FCC Identifier: 2BNTC-SMPB68 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: CiCi Jiang Date: June 18, 2026 Title: GM Signature of applicant:

SMPB68-LD-JMT001 SMPB68 20316-0047-01 StevenSam 260528 工艺：激光镭雕 字体颜色：灰色 注意：CE字高不小于5mm，垃圾桶字高不小于7mm。 33mm 100%100% 300% 26.8mm 8mm

Page 1 of 14 Code:AB-RF-05-b FCC Test Report Report No.:1812C60284612502 Applicant: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, China ( Zip Code: 528429) Product Name:Wireless Power Bank Report Date:2026-06-17 Shenzhen Anbotek Compliance Laboratory Limited #资质章# #检测章# #报告二维码# Report No.: 1812C60284612502 Page 2 of 14 FCC ID: 2BNTC-SMPB68 Code:AB-RF-05-b Contents 1. General Information ...............................................................................................................................5 1.1. Client Information ........................................................................................................................5 1.2. Description of Device (EUT) ........................................................................................................5 1.3. Auxiliary Equipment Used During Test........................................................................................6 1.4. Description of Test Modes...........................................................................................................6 1.5. Test Equipment List.....................................................................................................................6 1.6. Measurement Uncertainty ...........................................................................................................6 1.7. Description of Test Facility ..........................................................................................................7 1.8. Disclaimer....................................................................................................................................7 2. Measurement and Result ......................................................................................................................8 2.1. Limits For Maximum Permissible Exposure (MPE) .....................................................................8 2.2. Test Setup ...................................................................................................................................8 2.3. Test Procedure ............................................................................................................................9 2.4. Test Result ................................................................................................................................10 APPENDIX I -- TEST SETUP PHOTOGRAPH .......................................................................................14 APPENDIX II -- EXTERNAL PHOTOGRAPH .........................................................................................14 APPENDIX III -- INTERNAL PHOTOGRAPH..........................................................................................14 Report No.: 1812C60284612502 Page 3 of 14 FCC ID: 2BNTC-SMPB68 Code:AB-RF-05-b TEST REPORT Applicant:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Manufacturer:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Product Name:Wireless Power Bank Model No.:SMPB68, SMPB68B, SMPB68G Trade Mark: N/A Rating(s): Input: 5V⎓3A, 9V⎓2A, 12V⎓1.5A USB-COutput: 5V⎓3A, 9V⎓2.22A, 12V⎓1.67A WPT Output: 15W Max USB-C+WPT Output:5V⎓3A Output:Total 20W(Max) Battery Capacity: DC 3.7V, 5000mAh Test Standard(s): FCC Part 1.1310, 1.1307(b), FCC Part 2.1093 Test Method(s): KDB680106 D01 RF Exposure Wireless Charging Apps v04 October 25, 2023 TCB Workshop The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC Part 1.1307 & FCC Part 2.1093 & KDB680106 D01 & TCB Workshop, October 25, 2023 requirements. This report applies to above tested sample only and shall not be reproduced in part without written approval of Shenzhen Anbotek Compliance Laboratory Limited. Date of Receipt2026-05-22 Date of Test2026-05-22 to 2026-06-02 Prepared By (Yuki Long) Approved & Authorized Signer (Jules Guo) Report No.: 1812C60284612502 Page 4 of 14 FCC ID: 2BNTC-SMPB68 Code:AB-RF-05-b Revision History Report VersionDescriptionIssued Date R00 Original Issue. 2026-06-17 Report No.: 1812C60284612502 Page 5 of 14 FCC ID: 2BNTC-SMPB68 Code:AB-RF-05-b 1. General Information 1.1. Client Information Applicant:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, China ( Zip Code: 528429) Manufacturer:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, China ( Zip Code: 528429) Factory:JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, China ( Zip Code: 528429) 1.2. Description of Device (EUT) Product Name:Wireless Power Bank Model No.: SMPB68, SMPB68B, SMPB68G (Note: All samples are the same except the model name, so we prepare "SMPB68" for test only.) Trade Mark:N/A Test Power Supply:DC 3.7V battery inside Test Sample No.:1-2-1(Normal Sample), 1-2-2(Engineering Sample) Adapter: N/A RF Specification Operation Frequency :112-205kHz Modulation Type : ASK Antenna Type :Inductive loop coil Antenna Remark: 1) All of the RF specification are provided by customer. 2) For a more detailed features description, please refer to the manufacturer’s specifications or the User’s Manual. Report No.: 1812C60284612502 Page 6 of 14 FCC ID: 2BNTC-SMPB68 Code:AB-RF-05-b 1.3. Auxiliary Equipment Used Dur…

Text truncated - open the document above for the full version.

Page 1 of 25 Code:AB-RF-05-b FCC Test Report Report No.:1812C60284612501 Applicant: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Address: 3F B3 and 3F B4 Chuangzhi Science Park, No.22 Xingpu Avenue East, Huangpu Town, Zhongshan City, Guangdong Province, China ( Zip Code: 528429) Product Name:Wireless Power Bank Report Date:2026-06-17 Shenzhen Anbotek Compliance Laboratory Limited #资质章# #检测章# #报告二维码# Report No.: 1812C60284612501 Page 2 of 25 FCC ID: 2BNTC-SMPB68 Code:AB-RF-05-b Contents 1. General Information .............................................................................................................................5 1.1. Client Information ......................................................................................................................5 1.2. Description of Device (EUT) ......................................................................................................5 1.3. Auxiliary Equipment Used During Test......................................................................................6 1.4. Description of Test Modes.........................................................................................................7 1.5. Description Of Test Setup .........................................................................................................8 1.6. Test Equipment List.................................................................................................................10 1.7. Measurement Uncertainty .......................................................................................................11 1.8. Description of Test Facility ......................................................................................................11 1.9. Disclaimer................................................................................................................................11 2. Summary of Test Results ..................................................................................................................12 3. Conducted Emission Test..................................................................................................................13 3.1. Test Standard and Limit ..........................................................................................................13 3.2. Test Setup ...............................................................................................................................13 3.3. Test Procedure ........................................................................................................................13 3.4. Test Data .................................................................................................................................13 4. Radiation Spurious Emission.............................................................................................................16 4.1. Test Standard and Limit ..........................................................................................................16 4.2. Test Setup ...............................................................................................................................16 4.3. Test Procedure ........................................................................................................................17 4.4. Test Data .................................................................................................................................17 5. 20dB Occupy Bandwidth Test ...........................................................................................................22 5.1. Test Standard and Limit ..........................................................................................................22 5.2. Test Setup ...............................................................................................................................22 5.3. Test Procedure ........................................................................................................................22 5.4. Test Data .................................................................................................................................22 6. Antenna Requirement........................................................................................................................24 6.1. Test Standard and Requirement .............................................................................................24 6.2. Antenna Connected Construction ...........................................................................................24 APPENDIX I -- TEST SETUP PHOTOGRAPH .....................................................................................25 APPENDIX II -- EXTERNAL PHOTOGRAPH .......................................................................................25 APPENDIX III -- INTERNAL PHOTOGRAPH........................................................................................25 Report No.: 1812C60284612501 Page 3 of 25 FCC ID: 2BNTC-SMPB68 Code:AB-RF-05-b TEST REPORT Applicant: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Manufacturer: JMTEK TECHNOLOGY(ZHONGSHAN) CO., LTD Product Name: Wireless Power Bank Model No.: SMPB68, SMPB68B, SMPB68G Trade Mark: N/A Rating(s): Input: 5V⎓3A, 9V⎓2A, 12V⎓1.5A USB-COutput: 5V⎓3A, 9V⎓2.22A, 12V⎓1.67A WPT Output: 15W Max USB-C+WPT Output:5V⎓3A Output:Total 20W(Max) Battery Capacity: DC 3.7V, 5000mAh Test Standard(s): 47 CFR Part 15 Subpart C Test Method(s): ANSI C63.10-2020+Cor.1-2023 ANSI C63.30-2021 The device described above is tested by Shenzhen Anbotek Compliance Laboratory Limited to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen Anbotek Compliance Laboratory Limited is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Tes…

Text truncated - open the document above for the full version.

深圳市宸兴电子技术有限公司 公司名称：深圳市宸兴电子技术有限公司 Company name：Shenzhen Chenxing Electronic Technology Co., Ltd. 工厂地址：深圳市宝安区新安街道大宝路51号新柯城科技工业园1栋5楼 Factory address：5th Floor, Building 1, Xinkecheng Science and Technology Industrial Park, No.51 Dabaoroad, Xin'an Street, Bao'an District, Shenzhen, Guangdong, China 第 1 页 产 品 承 认 书 PRODUCTSPECIFICATIONFORAPPROVAL 客 户 名 称： CUSTOMER 杰美泰 产 品 名 称： PRODUCTNAME A11 薄线圈 物 料 编 码： PARTNo. WPC680 产 品 规 格： PRODUCTSPEC 感量：6.5uH±5% 线材：0.08*24*2*10Ts 磁片：43.5*5.3*0.8双槽 出线10mm、1.5mmEVA背胶 日期： DATE 20 23年03月15日 版 本 型 号： VERSION REV 1.0 版本 Revision 变更内容 ModifiedContent 责任 人 Principle 日期 Date 备注 Note RE V 1.0首次发布薛 磊2023-03-15 制定/PREPAREDBY审核/CHECKEDBY核准/APPROVEDBY 客户认可签名及盖章 Authorizedsignature& companychop 附上的是产品规格书，有任何疑问，请及时反馈给我们，谢谢 ! 深圳市宸兴电子技术有限公司 公司名称：深圳市宸兴电子技术有限公司 工厂地址：深圳市宝安区新安街道大宝路51号新柯城科技工业园1栋5楼 第 2 页 产品规格 SPECIFICATION 一、产品尺寸 磁片直径 A 43.5±0.5mm 线圈外径B 40 ± 1.5mm 线圈内径C20.5±0.5mm 产品厚度D<3.5mm 出线长度E10mm±2mm 焊锡长度F3±2mm 磁片开孔直径G5.3mm 磁片厚度0.8±0.05mm 磁片形状圆形双L槽 背胶厚度1.5mmEVA双面胶 防碎黑膜不 深圳市宸兴电子技术有限公司 公司名称：深圳市宸兴电子技术有限公司 工厂地址：深圳市宝安区新安街道大宝路51号新柯城科技工业园1栋5楼 第 3 页 二、原理图 三、绕线参数 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 WindingDirection SF 漆包线 0.08*24 双股并绕 10TsCCW 四、电气特性： 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS IND.S-F L ： 6.5uH±5% 100KHz/1.0VLCZMETER1062B 五、产品图片