2BO3L-14U40VNotebook Computer

TEL: 886-3-327-0868 Page Number : 1 of 19 FAX: 886-3-327-0855 Issue Date : Jul. 10, 2026 Report Template No.: BU5-FR15EWLUNII4 AC MA Version 2.0 Report Version : 01 FCC RADIO TEST REPORT Report No.: FR651934G FCC RADIO TEST REPORT FCC ID : 2BO3L-14U40V Equipment : Notebook Computer Brand Name : LG Model Name : 14U40V Series Model Name : 14UD40V, 14UG40V, 14UB40V, 14US40V, 14UT40V Applicant : LG Electronics Inc. 222, LG-ro, Jinwi-myeon Pyeongtaek-si, Gyeonggi-do 17709, REPUBLIC OF KOREA Manufacturer : LG Electronics Inc. 222, LG-ro, Jinwi-myeon Pyeongtaek-si, Gyeonggi-do 17709, REPUBLIC OF KOREA Standard : FCC Part 15 Subpart E §15.407 The product was received on Jun. 01, 2026 and testing was performed from Jun. 08, 2026 to Jun. 24, 2026. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this partial report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL: 886-3-327-0868 Page Number : 2 of 19 FAX: 886-3-327-0855 Issue Date : Jul. 10, 2026 Report Template No.: BU5-FR15EWLUNII4 AC MA Version 2.0 Report Version : 01 FCC RADIO TEST REPORT Report No.: FR651934G Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 6 1.3 Testing Location ................................................................................................................................ 7 1.4 Applicable Standards ......................................................................................................................... 7 2 Test Configuration of Equipment Under Test ......................................................................................... 8 2.1 Carrier Frequency and Channel ........................................................................................................ 8 2.2 Test Mode .......................................................................................................................................... 8 2.3 Connection Diagram of Test System ................................................................................................. 9 2.4 Support Unit used in test configuration and system .......................................................................... 9 2.5 EUT Operation Test Setup .............................................................................................................. 10 2.6 Measurement Results Explanation Example ................................................................................... 10 3 Test Result ................................................................................................................................................ 11 3.1 Maximum E.I.R.P Output Power Measurement .............................................................................. 11 3.2 Unwanted Emissions Measurement ................................................................................................ 12 3.3 Antenna Requirements .................................................................................................................... 17 4 List of Measuring Equipment .................................................................................................................. 18 5 Measurement Uncertainty ....................................................................................................................... 19 Appendix A. Conducted Test Results Appendix B. Conducted Spurious Emission Appendix C. Conducted Spurious Emission Plots Appendix D. Radiated Spurious Emission Test Data Appendix E. Duty Cycle Plots Appendix F. Setup Photographs Appendix G. Sample List TEL: 886-3-327-0868 Page Number : 3 of 19 FAX: 886-3-327-0855 Issue Date : Jul. 10, 2026 Report Template No.: BU5-FR15EWLUNII4 AC MA Version 2.0 Report Version : 01 FCC RADIO TEST REPORT Report No.: FR651934G History of this test report Report No. Version Description Issue Date FR651934G 01 Initial issue of report Jul. 10, 2026 TEL: 886-3-327-0868 Page Number : 4 of 19 FAX: 886-3-327-0855 Issue Date : Jul. 10, 2026 Report Template No.: BU5-FR15EWLUNII4 AC MA Version 2.0 Report Version : 01 FCC RADIO TEST REPORT Report No.: FR651934G Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.1 15.407(a) Maximum E.I.R.P Output Power Pass - 3.2 15.407(b) Unwanted Emissions Pass - 3.3 15.203 Antenna Requirement Pass - Note: 1. The original module test report (Report No.: 210209-01.TR13) was referenced for applicable test data. Conducted Power and Unwanted Radiated Emissions (Spurious Emissions) were verified on the host. Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur …

Text truncated - open the document above for the full version.

Antenna Reports Company: INNOWAVE Model name: HQ26006001EK0 Issue date: 2026/06/05 Documented by:_ _ Antenna Summary Table Check items Information Provided by lab INNOWAVE GTS LAB Manufacturer/ Brand name INNOWAVE Model name (Part number) HQ26006001EK0 Test environment GTS Maxsign-RayZone2800c List of calibrated test equipment GTS2800 with calibrated date: : On December 14, 2025，Due to On December 13, 2026,Keysight E5071C,GTS Maxsign-RayZone2800c, E5071C with calibrated date: On December 14, 2025， Due to On December 13, 2026,Keysight E5071C,GTS Maxsign-RayZone2800c, Antenna detail info. ANT1: BT/WiFi2.4G / 5G / 6E antenna (2.4~2.5GHz, 5.15~7.125GHz), PIFA type antenna. ANT2: WiFi 2.4G / 5G / 6E antenna (2.4~2.5GHz, 5.15~7.125GHz), PIFA type Antenna gain test data Included antenna frequency, gain pattern Note: Antenna gain was measured in the anechoic chamber, 3D scan was exercised, and the highest numbers are reported in this document. Antenna Test data: ANT2 Antenna model name: HQ26006001EK0 Antenna type: PIFA WLAN Peak Gain (dBi) 2400~2483.5MHz 1.11 6425~6525MHz 1.94 5150~5250MHz 1.81 6525~6875MHz 2.02 5250~5350MHz 2.21 6875~7125MHz 2.43 5470~5725MHz 1.45 5725~5850MHz 2.22 5850~5925MHz 2.34 5925~6425MHz 1.88 (Rear view– Front view) WIFI 2.4G (2450 MHz) WIFI 5G (5200 MHz) WIFI 5G (5300 MHz) WIFI 5G (5500 MHz) WIFI 5G (5800 MHz) WIFI 6E (6400 MHz) ANT1 Antenna model name: HQ26006001EK0 Antenna type: PIFA WLAN Peak Gain (dBi) 2400~2483.5MHz 1.67 6425~6525MHz 1.99 5150~5250MHz 1.56 6525~6875MHz 1.65 5250~5350MHz 1.81 6875~7125MHz 2.28 5470~5725MHz 2.33 5725~5850MHz 2.12 5850~5925MHz 2.09 5925~6425MHz 2.11 BT (dBi) 2400~2483.5MHz 1.67 (Rear view– Front view) WIFI 2.4G (2450 MHz) WIFI 5G (5200 MHz) WIFI 5G (5300 MHz) WIFI 5G (5500 MHz) WIFI 5G (5800 MHz) WIFI 6E (6500 MHz)

Antenna Reports Company: SPEED Model name: HQ26006001EL0 Issue date: 2026/06/05 Documented by: _ _ Antenna Summary Table Check items Information Provided by lab SPEED ETS LAB Manufacturer/ Brand name SPEED Model name (Part number) HQ26006001EL0 Test environment ETS AMS-8500 OTA Performance Test System Test software EMQuest Date Acquisition and Analysis Software List of calibrated test equipment ETS AMS-8500 with calibrated date: On December 6, 2025，Due to On December 5, 2026； Keysight E5071C with calibrated date: On December 26, 2025，Due to On December 25, 2026 Antenna detail info. ANT1: BT/WiFi2.4G / 5G / 6E antenna (2.4~2.5GHz, 5.15~7.125GHz), PIFA type antenna. ANT2: WiFi 2.4G / 5G / 6E antenna (2.4~2.5GHz, 5.15~7.125GHz), PIFA type antenna. Antenna gain test data Included antenna frequency, gain pattern Note: Antenna gain was measured in the anechoic chamber, 3D scan was exercised, and the highest numbers are reported in this document. Antenna Test data: ANT2 Antenna model name: HQ26006001EL0 Antenna type: PIFA WLAN Peak Gain (dBi) 2400~2483.5MHz 2.70 6425~6525MHz 1.27 5150~5250MHz 2.17 6525~6875MHz 1.16 5250~5350MHz 2.07 6875~7125MHz 1.17 5470~5725MHz 1.82 5725~5850MHz 3.81 5850~5925MHz 2.71 5925~6425MHz 2.82 (Rear view– Front view) WIFI 2.4G (2450 MHz) WIFI 5G (5200 MHz) WIFI 5G (5300 MHz) Y XZ Z Y X X Y Z ZX Y WIFI 5G (5500 MHz) WIFI 5G (5800 MHz) WIFI 6E (6400 MHz) ANT1 Antenna model name: HQ26006001EL0 Antenna type: PIFA X Y Z ZX Y Y XZ ZX Y Y XZ ZX Y Y XZ ZX Y WLAN Peak Gain (dBi) 2400~2483.5MHz 1.86 6425~6525MHz 1.75 5150~5250MHz 2.28 6525~6875MHz 1.87 5250~5350MHz 1.45 6875~7125MHz 1.82 5470~5725MHz 1.96 5725~5850MHz 1.42 5850~5925MHz 1.29 5925~6425MHz 1.52 BT (dBi) 2400~2483.5MHz 1.86 (Rear view– Front view) WIFI 2.4G (2450 MHz) WIFI 5G (5200 MHz) WIFI 5G (5300 MHz) X Y Z Z Y X X Y Z ZX Y WIFI 5G (5500 MHz) WIFI 5G (5800 MHz) WIFI 6E (6500 MHz) Y XZ Z Y X Y XZ Z Y X X Y Z Z Y X X Y Z ZX Y Elevation = 0.0

TEL: 886-3-327-0868 Page Number : 1 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 FCC DFS TEST REPORT FCC ID : 2BO3L-14U40V Equipment : Notebook Computer Brand Name : LG Model Name : 14U40V Series Model Name : 14UD40V, 14UG40V, 14UB40V, 14US40V, 14UT40V Applicant : LG Electronics Inc. 222, LG-ro, Jinwi-myeon Pyeongtaek-si, Gyeonggi-do 17709, REPUBLIC OF KOREA Manufacturer : LG Electronics Inc. 222, LG-ro, Jinwi-myeon Pyeongtaek-si, Gyeonggi-do 17709, REPUBLIC OF KOREA Standard : FCC Part 15 Subpart E The product was received on Jun. 01, 2026 and testing was performed from Jun. 11, 2026 to Jun. 11, 2026. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL: 886-3-327-0868 Page Number : 2 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ....................................................................................... 5 1.2 Modification of EUT· ....................................................................................................................... 5 1.3 Testing Location ............................................................................................................................... 5 1.4 Applied Standards ............................................................................................................................ 6 1.5 Support Unit used in test configuration and system ......................................................................... 6 2 Requirements and Parameters for DFS Test ........................................................................................... 7 2.1 Summary of Dynamic Frequency Selection Test ............................................................................. 7 2.2 Applicability of DFS Requirements ................................................................................................... 8 2.3 Interference Threshold values, Master or Client incorporating In-Service Monitoring ..................... 9 2.4 DFS Response requirement values .................................................................................................. 9 2.5 Short Pulse Radar Test Waveforms ............................................................................................... 10 3 Calibration Setup and DFS Test Results ............................................................................................... 11 3.1 Calibration of Radar Waveform ...................................................................................................... 11 3.2 In-Service Monitoring: Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period ................................................................................................................... 13 4 List of Measuring Equipment .................................................................................................................. 18 Appendix A. Setup Photographs TEL: 886-3-327-0868 Page Number : 3 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 History of this test report Report No. Version Description Issue Date FZ651934 01 Initial issue of report Jul. 08, 2026 TEL: 886-3-327-0868 Page Number : 4 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.2 FCC Part 15 Subpart E §15.407 (h) DFS Channel Move Time Pass 0.148 sec Channel Closing Transmission time Pass <200ms + 0 ms (aggregate) Non-Occupancy Period and Client Beacon Test Pass No transmission or Beacons occurred Note: Since the product is client without radar detection function, only Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period Test are required to be performed. Conformity Assessment Condition: The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentially occur if measurement uncertainty is taken into account. Disclaimer: The product specifications of the EUT presented in the test report that may affect the test assessments are declared by the manufacturer who shall take full responsibility for the authenticity. Reviewed by: Sheng Kuo Report Producer: Aya Yang TEL: 886-3-327-0868 Page Number : 5 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. :…

Text truncated - open the document above for the full version.

TEL: 886-3-327-0868 Page Number : 12 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 3.1.4 Radar Waveform Calibration Result 160MHz / 5570MHz (CH114) Radar Type 0 Radar / DFS detection threshold level and the burst of pulses on the Channel frequency TEL: 886-3-327-0868 Page Number : 13 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 3.2 In-Service Monitoring: Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period 3.2.1 Limit of In-Service Monitoring The EUT has In-Service Monitoring function to continuously monitor the radar signals, If radar is detected, it must leave the channel (Shutdown). The Channel Move Time to cease all transmissions on the current Channel upon detection of a Radar Waveform above the DFS Detection Threshold within 10 sec. The total duration of Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate Channel changes (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Non-Occupancy Period time is 30 minute during which a Channel will not be utilized after a Radar Waveform is detected on that Channel. The non-associated Client Beacon Test is during the 30 minutes observation time. The EUT should not make any transmissions in the DFS band after EUT power up. TEL: 886-3-327-0868 Page Number : 14 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 3.2.2 Test Procedures 1. The radar pulse generator is setup to provide a pulse at frequency that the Master and Client are operating. A type 0 radar pulse with a 1us pulse width and a 1428 us PRI is used for the testing. 2. The vector signal generator is adjusted to provide the radar burst (18 pulses) at a level of approximately -62dBm at the antenna of the Master device. 3. A trigger is provided from the pulse generator to the DFS monitoring system in order to capture the traffic and the occurrence of the radar pulse. 4. A U-NII device operating as a Client Device will associate with the Master at Channel. The MPEG file “TestFile.mpg” specified by the FCC is streamed from the “file computer” through the Master to the Client Device and played in full motion video using Media Player Classic Ver. 6.4.8.6 in order to properly load the network for the entire period of the test. 5. When a radar Burst with a level equal to the DFS Detection Threshold + 1dB is generated on the Operating Channel of the U-NII device. At time T0 the Radar Waveform generator sends a Burst of pulse of the radar waveform at Detection Threshold + 1dB. 6. Observe the transmissions of the EUT at the end of the radar Burst on the Operating Channel. Measure and record the transmissions from the EUT during the observation time (Channel Move Time). One 12 seconds plot is reported for the Short Pulse Radar Types 0. The plot for the Short Pulse Radar Types start at the end of the radar burst. The Channel Move Time will be calculated based on the zoom in 600ms plot of the Short Pulse Radar Type. 7. Measurement of the aggregate duration of the Channel Closing Transmission Time method. With the spectrum analyzer set to zero span tuned to the center frequency of the EUT operating channel at the radar simulated frequency, peak detection, and max hold, the dwell time per bin is given by: Dwell (0.4ms)= S (12000ms) / B (30000); where Dwell is the dwell time per spectrum analyzer sampling bin, S is the sweep time and B is the number of spectrum analyzer sampling bins. An upper bound of the aggregate duration of the intermittent control signals of Channel Closing Transmission Time is calculated by: C (ms)= N X Dwell (0.4 ms); where C is the Closing Time, N is the number of spectrum analyzer sampling bins (intermittent control signals) showing a U-NII transmission and Dwell is the dwell time per bin. 8. Measure the EUT for more than 30 minutes following the channel move time to verify that no transmissions or beacons occur on this Channel. 9. The test frequency , bandwidth and data rate as following table: BW / Channel Test Data Rate 160MHz / 5570MHz (CH114) MCS0 TEL: 886-3-327-0868 Page Number : 15 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 3.2.3 Test Setup Conducted Setup Photo 3.2.4 Test Deviation There is no deviation with the original standard. 3.2.5 Result of Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Period for Client Beacon Test Test Mode : Client without radar detection Temperature : 21.4~23.4°C Test Engineer : Ray Wang Relative Humidity : 48.7~53.7% BW / Channel Test Item Test Result Limit Pass/Fail 160MHz / 5570MHz (CH114) Channel Move Time 0.148 s ＜ 10s Pass Channel Closing Transmission Time 200ms + 0 ms ＜ 260ms Pass Non-Occupancy Period ≥ 30 ≥ 30 min Pass Note: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 seconds period. The aggregate duration of control signals will not count quiet periods in between transmissions. TEL: 886-3-327-0868 Page Number : 16 of 18 FAX: 886-3-327-0855 Issue Date : Jul. 08, 2026 Report Template No.: BU5-FZ15EDFS Version 1.2 Report Version : 01 FCC DFS TEST REPORT Report No. : FZ651934 3.2.6 Channel Move Time, Channel Closing Transmission Time and Non-Occupancy Peri…

Text truncated - open the document above for the full version.

TEL: +886-3-327-0868 Page Number : 1 of 25 FAX: +886-3-327-0855 Issue Date : Jul. 09, 2026 Report Template No.: BU5-FR15EWL AC MA Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR651934E FCC RADIO TEST REPORT FCC ID : 2BO3L-14U40V Equipment : Notebook Computer Brand Name : LG Model Name : 14U40V Series Model Name : 14UD40V, 14UG40V, 14UB40V, 14US40V, 14UT40V Applicant : LG Electronics Inc. 222, LG-ro, Jinwi-myeon Pyeongtaek-si, Gyeonggi-do 17709, REPUBLIC OF KOREA Manufacturer : LG Electronics Inc. 222, LG-ro, Jinwi-myeon Pyeongtaek-si, Gyeonggi-do 17709, REPUBLIC OF KOREA Standard : FCC Part 15 Subpart E §15.407 The product was received on Jun. 01, 2026 and testing was performed from Jun. 08, 2026 to Jun. 24, 2026. We, Sporton International Inc. Wensan Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures and has been in compliance with the applicable technical standards. The test results in this partial report apply exclusively to the tested model / sample. Without written approval from Sporton International Inc. Wensan Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu Sporton International Inc. Wensan Laboratory No.58, Aly. 75, Ln. 564, Wenhua 3rd, Rd., Guishan Dist., Taoyuan City 333010, Taiwan (R.O.C.) TEL: +886-3-327-0868 Page Number : 2 of 25 FAX: +886-3-327-0855 Issue Date : Jul. 09, 2026 Report Template No.: BU5-FR15EWL AC MA Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR651934E Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ........................................................................................ 5 1.2 Modification of EUT ........................................................................................................................... 7 1.3 Testing Location ................................................................................................................................ 8 1.4 Applicable Standards ......................................................................................................................... 8 2 Test Configuration of Equipment Under Test ......................................................................................... 9 2.1 Carrier Frequency and Channel ........................................................................................................ 9 2.2 Test Mode ........................................................................................................................................ 11 2.3 Connection Diagram of Test System ............................................................................................... 12 2.4 Support Unit used in test configuration and system ........................................................................ 12 2.5 EUT Operation Test Setup .............................................................................................................. 13 2.6 Measurement Results Explanation Example ................................................................................... 13 3 Test Result ................................................................................................................................................ 14 3.1 Maximum Conducted Output Power Measurement ........................................................................ 14 3.2 Unwanted Emissions Measurement ................................................................................................ 16 3.3 Antenna Requirements .................................................................................................................... 22 4 List of Measuring Equipment .................................................................................................................. 23 5 Measurement Uncertainty ....................................................................................................................... 25 Appendix A. Conducted Test Results Appendix B. Conducted Spurious Emission Appendix C. Conducted Spurious Emission Plots Appendix D. Radiated Spurious Emission Test Result Appendix E. Duty Cycle Plots Appendix F. Setup Photographs Appendix G. Sample List TEL: +886-3-327-0868 Page Number : 3 of 25 FAX: +886-3-327-0855 Issue Date : Jul. 09, 2026 Report Template No.: BU5-FR15EWL AC MA Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR651934E History of this test report Report No. Version Description Issue Date FR651934E 01 Initial issue of report Jul. 09, 2026 TEL: +886-3-327-0868 Page Number : 4 of 25 FAX: +886-3-327-0855 Issue Date : Jul. 09, 2026 Report Template No.: BU5-FR15EWL AC MA Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR651934E Summary of Test Result Report Clause Ref Std. Clause Test Items Result (PASS/FAIL) Remark 3.1 15.407(a) Maximum Conducted Output Power Pass - 3.2 15.407(b) Unwanted Emissions Pass - 3.3 15.203 Antenna Requirement Pass - Note: 1. The original module test report (Report No.: 201120-03.TR01 and 201120-03.TR02) was referenced for applicable test data. Conducted Power and Unwanted Radiated Emissions (Spurious Emissions) were verified on the host. Conformity Assessment Condition: 1. The test results (PASS/FAIL) with all measurement uncertainty excluded are presented against the regulation limits or in accordance with the requirements stipulated by the applicant/manufacturer who shall bear all the risks of non-compliance that may potentiall…

Text truncated - open the document above for the full version.

TEL: +886-3-327-0868 Page Number : 19 of 25 FAX: +886-3-327-0855 Issue Date : Jul. 09, 2026 Report Template No.: BU5-FR15EWL AC MA Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR651934E by rotating the turn table from 0 degree to 360 degrees to find the peak maximum hold reading. When there is no suspected emission found and the emission level is with at least 6 dB margin against QP limit line, the position is marked as “-“. 13. Radiated testing above 1 GHz is performed by adjusting the antenna tower from 1 m to 4 m and by rotating the turn table from 0 degree to 360 degrees to find the peak maximum hold reading for scanning all frequencies. When there is no suspected emission found and the harmonic emission level is with at least 6 dB margin against average limit line, the position is marked as “-“. 3.2.4 Test Setup For Conducted Measurement Setup For radiated emissions below 30MHz TEL: +886-3-327-0868 Page Number : 20 of 25 FAX: +886-3-327-0855 Issue Date : Jul. 09, 2026 Report Template No.: BU5-FR15EWL AC MA Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR651934E For radiated emissions from 30MHz to 1GHz For radiated test from 1GHz to 18GHz TEL: +886-3-327-0868 Page Number : 21 of 25 FAX: +886-3-327-0855 Issue Date : Jul. 09, 2026 Report Template No.: BU5-FR15EWL AC MA Version 2.5 Report Version : 01 FCC RADIO TEST REPORT Report No. : FR651934E For radiated test above 18GHz 3.2.5 Test Results of Radiated Spurious Emissions (9 kHz ~ 30 MHz) The low frequency, which starts from 9 kHz to 30 MHz, is pre-scanned and the result which is 20 dB lower than the limit line is not reported. There is adequate comparison measurement of both open-field test site and alternative test site - semi-Anechoic chamber according to 414788 D01 Radiated Test Site v01r01, and the result came out very similar. 3.2.6 Test Result of Conducted Spurious at Band Edges Please refer to Appendix B and C. 3.2.7 Duty Cycle Please refer to Appendix E. 3.2.8 Test Result of Radiated Spurious Emissions (30MHz ~ 10th Harmonic) Please refer to Appendix D. TEL: +886-3-327-0868 Page Number : 22 of 25 FAX: +886-3-327-0855 Issue Date : Jul. 09, 2026 Report Template No.: BU5-FR15EWL AC MA Version 2.5 Report Versio…

Text truncated - open the document above for the full version.