2BO3L-RSMV3RF Module

htps://www.fcc.gov/supplychain/coveredlist FCC Part 2.911 (d)(5)(i) and 2.911(d)(5)(ii) Attestations Date: November 27, 2025 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn : Reviewing Engineer FCC ID: 2BO3L-RSMV3 Statement for 47 CFR section 2.911(d)(5)(i) LG Electronics Inc. certifies that as of the date of the application the equipment for which authorization is sought is not “ covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Statement for 47 CFR section 2.911(d)(5)(ii) LG Electronics Inc. (“the applicant”) certifies that, as of the date of the filing of this application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates – see KDB 986446 Question 5) as an entity producing “covered” equipment. LG Electronics Inc. (“the applicant”) certifies that, the device does not have cybersecurity and/or anti-virus software produced by Kaspersky Lab, Inc. or any of its successors and assignees, identified on the Covered list installed on the device, nor will it be installed by the applicant anytime after certification. Sincerely , Signed by: ____________________________ Na me: Yongdeok Kwon Title: Professional Company Name: LG Electronics Inc. Company Address: 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 17709, South Korea Contact Phone: 82-31-8066-5538 Email: [email protected]

Date: November 27, 2025 FCC ID: 2BO3L-RSMV3 FCC Part 15.212 Requirements: ItemYesNoComments 1 This module has the own shielding on transmitter using the ground layers as addressed in operational description. 2 This module has the buffered modulation/data inputs 3 Yes. This module has the own power supply regulation circuitry. (U4 DC/DC TPS560430YDBVR) 4 This module has PCB printed antennas as permanently attached on the module PCB. 5 The test was performed in a stand-alone configuration without any host product. 6 This module is labelled with its own FCC ID on PCB as silk print. 7 This module complies with all specific rules and operating requirements. 8 This module complies with the RF Exposure requirements as mobile installation condition. (20 cm) If a m odule does NOT meet one or more of the above listed requirements, the applicant may request Limited Modular Approval (LMA). Signed by: Name:Yongdeok Kwon Title: Professional Email Address: [email protected] Phone Number:82-31-8066-5538 Address: FCC Modular Approval Attestation Please state details about how the following requirements could or could NOT be met; and state how control of the end product, into which the module will be installed, will be maintained by the applicant/manufacturer, such that full compliance of the end product is always ensured. ■ Single Modular Approval ☐ Single Limited Modular Approval (LMA) ☐ Split Modular Approval ☐ Split Limited Modular Approval (LMA) 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 17709, South Korea 15.212 (a)(1)(i): The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212 (a)(1)(ii): The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. 15.212 (a)(1)(ii): The modular transmitter must have its own power supply regulation. 15.212 (a)(1)(iv): The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. 15.212 (a)(1)(v): The modular transmitter must be tested in a stand-alone configuration. 15.212 (a)(1)(vi): The modular transmitter must be labeled with its own FCC ID number. 15.212 (a)(1)(vii): The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instruction along with the module to explain any such requirements. 15.212 (a)(1)(viii): The modular transmitter must comply with any applicable RF exposure requirements. §15.212 Requiremnets

Date: May 12, 2025 Rev: 0.1 HACS-F039 U.S. Agent for Service of Process Attestation HCT America, Inc. ([email protected]) 840 Yosemite Way, Milpitas, CA 95035 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 3 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT AMERICA, INC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT AMERICA, INC. U.S. Agent for Service of Process Attestation Date: May 12, 2025 Rev: 0.1 HACS-F039 U.S. Agent for Service of Process Attestation HCT America, Inc. ([email protected]) 840 Yosemite Way, Milpitas, CA 95035 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 3 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT AMERICA, INC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT AMERICA, INC. REVISION TABLE Rev Description of Change Date Approved 0.0 Original Release 07/15/2024 QM 0.1 Update Address 05/12/2025 QM Date: May 12, 2025 Rev: 0.1 HACS-F039 U.S. Agent for Service of Process Attestation HCT America, Inc. ([email protected]) 840 Yosemite Way, Milpitas, CA 95035 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 3 of 3 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT AMERICA, INC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT AMERICA, INC. FCC Part 2.911(d)(7) Attestation U.S. Agent for Service of Process F ederal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer Applicant Information: Company Name: LG Electronics Inc. Contact Name: Yongdeok Kwon Company Address: 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 17709, South Korea Contact Phone Number: 82-31-8066-5538 Email: [email protected] FRN: 00369770 56 Applicant Signature: __________________ Signed by (Printed Name/Title): Yongdeok Kwon/Professional Date: November 27, 2025 LG Electronics Inc. (“the applicant”) as required by section 2.911(d)(7), designates th e following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. U. S. Agent Information: Company Name: LG Electronics USA, Inc. Contact Name: Heejae Cho Company Address: LG Electronics USA, 111 Sylvan Avenue, North Building, Englewood Cliffs, New Jersey 07632, United States Contact Phone Number: 201-470-2696 Email: [email protected] FRN: 0023476120 U.S. Agent Signature: _____________________ Signed by (Printed Name/Title): Heejae Cho/Team leader, LGEUS Regulatory and Environment Date: November 27, 2025

Date: To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD To whom it may concern: Subject : FCC Agent Authorization Letter for FCC ID: 2BO3L-RSMV3 This authorization is valid until further written notice from the applicant. Sincerely, Signed by: (Name) Yongdeok Kwon (Title) Professional [email protected] 82-31-8066-5538 (Address) November 27, 2025 2 22 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 17709, South Korea We, the undersigned, hereby authorize HCT America, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by HCT America, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). We declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. _________________________ (Email Address) (Phone number) We recognize that we are still responsible for the terms and conditions outlined in the HCT America Client Services Agreement.

Date: To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT: Request for Confidentiality for FCC ID: 2BO3L-RSMV3 W e hereby request confidential treatment of the information accompanying this application as outlined below: Exhibit 1 2 3 4 5 6 7 8 Sincerely, Signed by: (Name) Yongdeok Kwon (Title) Professional (Email Address) [email protected] (Phone number) 82-31-8066-5538 (Address) 222 LG-ro, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do 17709, South Korea November 27, 2025 Description Block Diagram Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. LONG-TERM CONFIDENTIAL SHORT-TERM CONFIDENTIAL (180 DAYS) User’s Manual Test-Setup Photos Internal Photos External Photos Schematics Parts List LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST

silk screen printing

TEST REPORT FCC MPE Test for RSMV3 Certification APPLICANT LG Electronics lnc. REPORT NO. HCT-RF-2511-FC028 DATE OF ISSUE November 26, 2025 Tested by Kwang Il Yoon Technical Manager Jong Seok Lee Accredited by KOLAS, Republic of KOREA F-TP22-03(Rev.06) 1 / 5 The report shall not be (partly) reproduced except in full without approval of the laboratory. HCT CO., LTD.2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Republic of Korea Tel. +82 31 645 6300 Fax. +82 31 645 6401 The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 2 of 5 HCT CO.,LTD. 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Republic of Korea Tel. +82 31 645 6300 Fax. +82 31 645 6401 TEST REPORT REPORT NO. HCT-RF-2511-FC028 DATE OF ISSUE November 26, 2025 Applicant LG Electronics lnc. 84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam- do 51554, Republic of Korea Product Name Model Name Radar Sensor RSMV3 FCC ID 2BO3L-RSMV3 Date of Test October 17, 2025 ~ November 21, 2025 Location of Test Ӎ Permanent Testing Lab ӎ On Site Testing (Address: 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi- do, Republic of Korea) Manufaucturer LG Electronics lnc. 170, Seongsan Pachong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam- do 51533, Republic of Korea Test Standard Used CFR 47 Part 2.1091 Test Results PASS Brand LG The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2511-FC028 F-TP22-03 (Rev. 06) Page 3 of 5 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 November 26, 2025 Initial Release Notice Content Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. The results shown in this test report only apply to the sample(s ), as received, provided by the applicant, unless otherwise stated. The test results have only been applied with the test methods required by the standard(s). The laboratory is not accredited for the test results marked *. Information provided by the applicant is marked **. Test results provided by external providers are marked ***. When confirmation of authenticity of this test report is required, please contact www.hct.co.kr This test report provides test result(s) under the scope accredited by the Korea Laboratory Accreditation Scheme (KOLAS), which signed the ILAC-MRA. (KOLAS (KS Q ISO/IEC 17025) Accreditation No. KT197) The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2511-FC028 F-TP22-03 (Rev. 06) Page 4 of 5 RF Exposure Statement 1. LIMITS According to §1.1310 and §2.1091 RF exposure is calculated. (B) Limits for General Population/Uncontrolled Exposures Frequency range (MHz) Electric field Strength (V/m) Magnetic field Strength (A/m) Power density (mW/cm²) Averaging time (minutes) 0.3 - 1.34 1.34 - 30 30 - 300 300 - 1500 1500 - 100.000 614 824/f 27.5   1.63 2.19/f 0.073   #) (100) #) (180/f²) 0.2 f/1500 1.0 30 30 30 30 30 F = frequency in MHz # = Plane-wave equivalent power density 2. MAXIMUM PERMISSIBLE EXPOSURE Prediction Prediction of MPE limit at a given distance S = PG/4πR² S = Power density P = power input to antenna G = power gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2511-FC028 F-TP22-03 (Rev. 06) Page 5 of 5 3. RESULTS EIRP[Radiated Power] 8.0 dBm EIRP[Radiated Power] 6.31 mW Prediction distance 20.00 cm Prediction frequency 61250 MHz Power density at prediction frequency (S) 0.0013 mW/cm 2 MPE limit for uncontrolled exposure at prediction frequency 1.0000 mW/cm 2

TEST REPORT FCC Test for RSMV3 Certification APPLICANT LG Electronics lnc. REPORT NO. HCT-RF-2511-FC027-R2 DATE OF ISSUE May 6, 2026 Tested by Kwang Il Yoon Technical Manager Jong Seok Lee Accredited by KOLAS, Republic of KOREA F-TP22-03(Rev.06) 1 / 32 The report shall not be (partly) reproduced except in full without approval of the laboratory. HCT CO., LTD.2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Republic of Korea Tel. +82 31 645 6300 Fax. +82 31 645 6401 The report shall not be (partly) reproduced except in full without approval of the laboratory. F-TP22-03 (Rev. 06) Page 2 of 32 HCT CO.,LTD. 2-6, 73, 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi-do, Republic of Korea Tel. +82 31 645 6300 Fax. +82 31 645 6401 TEST REPORT REPORT NO. HCT-RF-2511-FC027-R2 DATE OF ISSUE May 06, 2026 A pplicant LG Electronics lnc. 84, Wanam-ro, Seongsan-gu, Changwon-si, Gyeongsangnam- do 51554, Republic of Korea Product Name Model Name Radar Sensor RSMV3 FCC ID2BO3L-RSMV3 Date of TestOctober 27, 2025 ~ November 21, 2025 Location of Test Ӎ Permanent Testing Lab ӎ On Site Testing (Address: 74, Seoicheon-ro 578beon-gil, Majang-myeon, Icheon-si, Gyeonggi- do, Republic of Korea) Test Standard Used Part 15.255 Test Results PASS Brand LG The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2511-FC027-R2 F-TP22-03 (Rev. 06) Page 3 of 32 REVISION HISTORY The revision history for this test report is shown in table. Revision No. Date of Issue Description 0 November 26, 2025 Initial Release 1 April 23, 2026 Revised the TEST METHODOLOGY on page 6 2 May 06, 2026 Revised RF Output Power requirements on page 9 Notice Content Engineering Statement: The measurements shown in this report were made in accordance with the procedures indicated, and the emissions from this equipment were found to be within the limits applicable. I assume full responsibility for the accuracy and completeness of these measurements, and for the qualifications of all persons taking them. It is further stated that upon the basis of the measurements made, the equipment tested is capable of operation in accordance with the requirements of the FCC Rules under normal use and maintenance. The results shown in this test report only apply to the sample(s), as received, provided by th e applicant, unless otherwise stated. The test results have only been applied with the test methods required by the standard(s). The laboratory is not accredited for the test results marked *. Information provided by the applicant is marked **. Test results provided by external providers are marked ***. When confirmation of authenticity of this test report is required, please contact www.hct.co.kr This test report provides test result(s) under the scope accredited by the Korea Laboratory Accreditation Scheme (KOLAS), which signed the ILAC-MRA. (KOLAS (KS Q ISO/IEC 17025) Accreditation No. KT197) The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2511-FC027-R2 F-TP22-03 (Rev. 06) Page 4 of 32 CONTENTS 1. EUT DESCRIPTION 5 2. TEST METHODOLOGY 6 2.1 EUT CONFIGURATION 6 2.2 EUT EXERCISE 6 2.3 GENERAL TEST PROCEDURES 6 2.4 DESCRIPTION OF TEST MODES 6 3. INSTRUMENT CALIBRATION 7 4. FACILITIES AND ACCREDITATIONS 7 4.1 FACILITIES 7 4.2 EQUIPMENT 7 5. ANTENNA REQUIREMENTS 8 6. MEASUREMENT UNCERTAINTY 8 7. SUMMARY TEST OF RESULTS 9 7.1 ADDITIONAL DESCRIOPTIONS ABOUT TEST 10 8. TEST RESULT 11 8.1 OCCUPIED BANDWIDTH 11 8.2 RF OUTPUT POWER 14 8.3 SPURIOUS EMISSIONS 19 8.4 FREQUENCY STABILITY 26 8.5 AC Power line Conducted Emissions 29 9. LIST OF TEST EQUIPMENT 31 10. ANNEX A_ TEST SETUP PHOTO 32 The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2511-FC027-R2 F-TP22-03 (Rev. 06) Page 5 of 32 1. EUT DESCRIPTION Model RSMV3 Additional Model - EUT Type Radar Sensor EUT Serial Number EBG30108601 18 250627 0115 Power Supply 12.0 V Frequency Range 61 GHz ~ 61.5 GHz Antenna Type Patch Antenna in package Antenna Peak Gain(dBi) 6.3 Modulation Type FMCW EIRP Peak 18.90 dBm Average 4.67 dBm Manufaucturer LG Electronics lnc. 170, Seongsan Pachong-ro, Seongsan-gu, Changwon-si, Gyeongsangnam- do 51533, Republic of Korea The report shall not be (partly) reproduced except in full without approval of the laboratory. Report No. HCT-RF-2511-FC027-R2 F-TP22-03 (Rev. 06) Page 6 of 32 2. TEST METHODOLOGY The measurement procedure described in ANSI C63.10-2020 + Cor. 1-2023, operating under 47 CFR §15.255, was used for the measurement. Note : Here In after, ANSI C63.10-2020 + Cor. 1-2023 will be referred to as ANSI C63.10-2020 2.1 EUT CONFIGURATION The EUT configuration for testing is installed on EIRP measurement to meet the Commissions requirement and operating in a manner that intends to maximize its emission characteristics in a continuous normal application. 2.2 EUT EXERCISE The EUT was operated in the engineering mode to fix the Tx Frequency that was for the purpose of the measurements. 2.3 GENERAL TEST PROCEDURES Radiated Emissions The EUT is placed on a turn table, which is 0.8 m above the ground plane below 1 GHz and 1.5 m above 1 GHz with absorbers between the EUT and receiving antenna. The turntable shall rotate 360 degrees to determine the position of maximum emission level. EUT is set far-field distance away from the receiving antenna, which varied from 1 m to 4 m to find out the highest emission. And also, each emission was to be maximized by changing the polarization of receiving antenna both horizontal and vertical. In order to find out the max. emission, the relative positions of this hand-held transmitter (EUT) was rotated through three orthogonal axes according to the requirements in Section 8 of ANSI C63.10-2020. 2.4 DESCRIPTION OF TEST MODES The EUT has been tested under operating condition. Test program used to control the EUT for staying in continuous trans…

Text truncated - open the document above for the full version.