2BOMA-MK2025remote control
Good Earth Lighting,Inc.
Click to zoom
Application Details
- Equipment Class
- DSC - Part 15 Security/Remote Control Transmitter
- Date of Grant
- Apr 28, 2026
- Application Purpose
- Original Equipment
- Equipment Note
- remote control
- Frequency Range
- 433.92000000 - 433.92000000
- Company
- Good Earth Lighting,Inc.
- Country
- United States
Documents & Files
Document Text
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Users Manual
Mount again with Command® Medium Refill Strips. Monte de nuevo la unidad con tiras de repuesto Command® medianas. UPWARD UPWARD 3/16” dia. LED Closet Tap Light with Removable Remote Luz LED de Armario de Accionamiento por Golpeo con Control Remoto Retirable BO1411-WHG-07LF1-G INDOOR USE ONLY / SOLO PARA USO EN INTERIORES Remove cover by rotating counterclock- wise. Insert 4 “C” batteries. Retire la cubierta girándola en direcciĂłn contraria a las manecillas del reloj. Inserte las 4 baterĂas "C". Remove cover by rotating counterclockwise. Insert 4 “C” batteries. Retire la cubierta girándola en direcciĂłn contraria a las manecillas del reloj. Inserte las 4 baterĂas "C". 1243 1 2 3 Permanent Installation (Ceiling Mount) / InstalaciĂłn Permanente (Montaje en el Techo) Vertical Installation (Easy Mount) /InstalaciĂłn Vertical (Montaje Fácil) IMPORTANT: Failure to follow instructions carefully may cause damage. CAUTION: Do not hang over beds or on wallpaper./ IMPORTANTE: Si no sigue las instrucciones pueden producirse daños. PRECAUCIĂ“N: No cuelgue sobre camas o utilice en papel tapiz. WALL PLATE / PLACA DE PARED Removal / RemocĂon 2 1 12 Never pull the strip away from the surface! Always pull along the surface. Stretch the strip slowly against the surface at least 12 inches to release. Nunca jale la tira perpendicularmente a la superficie! Siempre jale la tira paralelamente a la superficie. Estire la tira lentamente contra la pared por lo menos 30 cm para soltar. Clean surface with rubbing alcohol. Remove red liners. Insert tabs into the slots. Press strips to the back of cover. Remove black liners. Press cover to surface with tab toward you. Press firmly for 30 seconds. Limpie la superficie con alcohol. Retire los protectores rojos. Inerte las lengĂĽetas en las renuras. Presione las tiras hasta la parte de atrás de la cubierta. wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side w all side wall side wall side w all side wall side w all side wall side wall side wall side wall side wall side wall side w all side wall side wall side wall side w all side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side w all side wall side wall side wall side wall side wall side w all side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side w all side wall side wall side wall side wall side wall side wall side w all side w all side wall side wall side w all side wall side wall side wall side w all side wall side wall side wall side wall side wall side wall side wall side w all side wall side wall side wall side w all side wall side wall side wall side w all side wall side wall side wall side w all side wall side wall side wall side w all side wall side wall side wall side w all side wall side Retire los protectores negros. Presione el cubierto a la superficie con la lengĂĽeta hacia usted. Presione con firmeza por 30 segundos. sec 30 To attach light, align notches and turn clockwise. Para instalar la luz, alinee las muescas y gire en el sentido de las agujas del reloj. To attach light, align notches and push light into mounting base. Turn clockwise to lock in place. Para instalar la luz, alinee las muescas y gire en el sentido de las agujas del reloj. Clean surface with rubbing alcohol. Remove red liner. Insert tab into the slot. Press strip to the back of wall plate. Limpie la superficie con alcohol desinfectante. Retire el recubrimiento rojo. Inserte la lengĂĽeta en la ranura. Presione la tira contra la parte trasera de la placa de pared. wall side w all side w all side w all side wall side w all side w all side w all side wall side w all side w all side w all side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side wall side w all side w all side wall side wall side w all side wall side w all side wall side w all side w all side w all side wall side w all side w all side wall side wall side w all side w all side wall side wall side w all side w all side w all side wall side w all side w all side w all side Remove black liner. Press wall plate to surface with tab toward you. Press firmly for 30 sec. Retire los protectores negros. Presione el cubierto a la superficie con la lengĂĽeta hacia usted. Presione con firmeza por 30 segundos. sec 30 Mark mounting holes in the cover. Drill 3/16” holes in surface. Press wall anchors into holes. Screw cover to anchors using two screws. Marque los agujeros de montaje en la cubierta. Taladre agujeros de 4,8 mm en la superficie. Presione los anclajes de pared hacia el interior de los agujeros. Atornille la cubierta en los anclajes utilizando dos tornillos. SLOWLY Lentament Lentamente For more product and warranty information go to https://goodearthlighting.com/contact-us or call the Customer Care Center 1-800-291-8838. Para obtener más informaciĂłn sobre el producto y la garantĂa, vaya a https://goodearthlighting.com/contact-us o llame al Centro de AtenciĂłn al Cliente al 1-800-291-8838. Need Help? / ÂżNecesitas Ayuda? Removal /RemocĂon 2 1 3 Rotate count- er-clockwise to release light from cover. Rote la unidad en sentido contrario al de las agujas del reloj para soltar la luz de la cubierta. Never pull the strip away from the surface! Always pull along the surface. Nunca jale l…
Text truncated - open the document above for the full version.
Attestation Statements
Applicant Declaration QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Good Earth Lighting,Inc.Applicant Legal Business Name Address 2100 Golf Road, Suite 460,, Rolling Meadows, IL 60008, USA, Illinois, 60008, United States 0036875649FRN Grantee Code 2BOMA 2BOMA-MK2025FCC ID: Luke ToppelAuthorized Contact Name Contact Phone 847-808-1133 [email protected] Email I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Applicant Signature: Date: 2025/12/24 Luke ToppelPrint Name: Product Development EngineerTitle: *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database
Attestation Statements
FCC COVERED LIST DECLARATION LETTER Page 1 of 1 Revision 1.0 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Good Earth Lighting,Inc.Applicant Legal Business Name Address 2100 Golf Road, Suite 460,, Rolling Meadows, IL 60008, USA, Illinois, 60008, United States 0036875649FRN Grantee Code 2BOMA 2BOMA-MK2025FCC ID: Luke ToppelAuthorized Contact Name Contact Phone 847-808-1133 [email protected] Email Good Earth Lighting,Inc. (“the applicant”) certifies: - the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. - as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. - the software to be loaded prior to marketing of the equipment identified above is not “covered” software manufactured by any entity including predecessors, successors, parents, subsidiaries, affiliates or any entity which has rebranded or relabeled the software produced by the entity(ies) identified on the “Covered List”. the device is not capable of storing or running software listed on the covered list and therefore is not inherently compliant-. NOTE: Justification/evidence explaining how compliance is met must accompany this letter Link to the Covered List: Covered List Applicant Signature: Date: 2025/12/24 Print Name: Luke Toppel Title: Product Development Engineer *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Justification/evidence: The device is not capable of storing or runni1.ng any software. Please refer to the user manual. The equipment for which authorization is2.sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Please refer to Internal photo.
Attestation Statements
UNITED STATES DESIGNATED AGENT LETTER Date: 2025/12/24 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Good Earth Lighting,Inc. Company Name: Good Earth Lighting,Inc. FRN: 0036875649 FRN: 0036875649 Grantee Code: 2BOMA Contact Name: Luke Toppel Contact Name Luke Toppel Address: 2100 Golf Road, Suite 460, Address: 2100 Golf Road, Suite 460, City/Province/Zip: Rolling Meadows, IL 60008, USA, Illinois, 60008 City/Province/Zip: Rolling Meadows, IL 60008, USA, Illinois, 60008 Telephone: 847-808-1133 Telephone: 847-808-1133 Fax: 847-808-1133 Fax: 847-808-1133 Email: [email protected] Email: [email protected] Applicable Equipment: FCC ID: 2BOMA-MK2025 ATTN: Director of Certification: We, Good Earth Lighting,Inc. understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Good Earth Lighting,Inc. acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant U.S. designated agent Name (Printed): Luke Toppel Name (Printed): Luke Toppel Title: - Title: - Signature: Signature: Product Development Engineer Product Development Engineer
Cover Letter(s)
Date: 2025/12/24 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2BOMA-MK2025 To whom it may concern: We, the undersigned, hereby authorize SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch and Bonnie Liao in SGS-CSTC Standards Technical Services Co., Ltd. (SGS) Guangzhou branch to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with applicant company FCC. This authorization is valid until further written notice from the applicant. Name (Printed): Luke Toppel Title: - Product Development Engineer Signature: On behalf of Company: Good Earth Lighting,Inc.
Cover Letter(s)
To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Good Earth Lighting,Inc. 2100 Golf Road, Suite 460,, Rolling Meadows, IL 60008, USA, Illinois, 60008, United States Regarding: Confidentiality Request regarding application for FCC ID: 2BOMA-MK2025 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant does NOT request product external photos, internal photos, test setup photos and user manual to be held confidential until the device is marketed or 180 days from the grant date, whichever is less. Sincerely, Name (Printed): Luke Toppel Title: Product Development Engineer Signature: On behalf of Company: Good Earth Lighting,Inc.
External Photos
SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 1 of 4 Appendix - External Photos for GZCR2512001976LM Test Model No.: BO1411-MK2025 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-02 Rev 1.1 Page: 4 of 4 - End of the Appendix -
ID Label/Location Info
MODEL NO.:BO1411-WHG-07LF1-G 7"LED Closet Tap light Use 4c batteries 1125-46 Made in Cambodia Good Earth lighting inc. 40mm 42mm 5mm 36mm
Internal Photos
SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 1 of 2 Appendix - Internal Photos for GZCR2512001976LM Test Model No.: BO1411-MK2025 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-03 Rev 1.1 Page: 2 of 2 EUT Constructional Details (EUT Photos) - End of the Appendix - 433.92 transmitter ANT
RF Exposure Info
SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251200197602 FCC ID: 2BOMA-MK2025 Page: 1 of 10 RF EXPOSURE EVALUATION REPORT Application No.: GZCR2512001976LM Applicant:Good Earth Lighting, Inc. Address of Applicant:2100 Golf Road, Suite 460, Rolling Meadows, IL 60008, USA Manufacturer:MEKO INTELLIGENT (CAMBODIA) CO., LTD. Address of Manufacturer:(58km, National 3th Highway), VEAS POU VILLAGE KHVAV COMMUNE, SAMRONG DISTRICT, TAKEO Factory:MEKO INTELLIGENT (CAMBODIA) CO., LTD. Address of Factory:(58km, National 3th Highway), VEAS POU VILLAGE KHVAV COMMUNE, SAMRONG DISTRICT, TAKEO Product Name:remote control Model No.: BO1411-MK2025 Standard(s) : 47 CFR Part 2.1093 Date of Receipt: 2025-12-11 Date of Evaluation: 2026-03-05 Date of Issue: 2026-03-11 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251200197602 Page: 2 of 10 Revision Record VersionReport No.DateRemark 01GZCR2512001976022026-03-11Original Authorized for issue by: Luke Lin/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251200197602 Page: 3 of 10 2Evaluation Summary ItemStandardMethodRequirementResult RF Exposure 47 CFR Part 2.1093 47 CFR Part 2.109347 CFR Part 2.1093Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251200197602 Page: 4 of 10 3Contents Page 1Cover Page...............................................................................................................................................1 2Evaluation Summary................................................................................................................................3 3Contents....................................................................................................................................................4 4General Information.................................................................................................................................5 4.1Details of E.U.T.................................................................................................................................5 4.2Evaluating Location...........................................................................................................................5 4.3Facility...............................................................................................................................................6 4.4Deviation from Standards..................................................................................................................6 4.5Abnormalities from Standard Conditions...........................................................................................6 5RF Exposure Evaluation..........................................................................................................................7 5.1Limit & Test Method...........................................................................................................................7 5.2Conclusion.........................................................................................................................................9 6EUT Constructional Details (EUT Photos)...........................................................................................10 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251200197602 Page: 5 of 10 4General Information 4.1Details of E.U.T. Power supply:DC 3V= battery size “CR2032” 3V *1pcs Cable(s):N/A RF character:Refer to report GZCR251200197601 for 433.92MHz detail. Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. 4.2Evaluating Location All tests were performed at: SGS-CSTC Standards Technical Services Co., Ltd., Guangzhou Branch EMC Laboratory, No.198, Kezhu Road, Science City, Economic & Technological Development Area, Guangzhou, Guangdong, China 510663 Tel: +86 20 82155555 No tests were sub-contracted. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-03 Rev 2.0 Report No.: GZCR251200197602 Page: 6 of 10 4.3Facility The facility is recognized, certified, or accredited by the following organizations: ● ACMA SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory can also perform testing for the Australian/New Zealand Regulatory Compliance Mark (RCM). ● SGS UK(Certificate No.: 32), SGS-TUV SAARLAND and SGS-FIMKO Have approved SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory as a supplier of EMC TESTING SERVICES and SAFETY TESTING SERVICES. ● FCC Recognized Accredited Test Firm(Registration No.: 486818) SGS-CSTC Standards Technical Services Co., Ltd., EMC Laboratory has been accredited and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Designation Number: CN5016, Test Firm Registration Number: 486818. ● ISED (Registration No.: 4620B, CAB identifier: CN0052) SGS-CSTC Standards Technical Services Co., Ltd., has been registered by Innovation Science and Economic Development Canada for Wireless Device Testing laboratories to test to Canadian radio equipment requirements. Registration No. 4620B, CAB identifier: CN0052. ● VCCI (Registration No.: R-12460, C-12584, G-20107 and T-11179) The 10m Semi-anechoic chamber, 966 Anechoic Chamber and Shielded Room of SGS-CSTC Standards Technical Services Co., Ltd. have been registered in accordance with th…
Text truncated - open the document above for the full version.
Test Report
SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251200197601 FCC ID: 2BOMA-MK2025 Page: 1 of 28 TEST REPORT Application No.: GZCR2512001976LM Applicant:Good Earth Lighting, Inc. Address of Applicant:2100 Golf Road, Suite 460, Rolling Meadows, IL 60008, USA Manufacturer:MEKO INTELLIGENT (CAMBODIA) CO., LTD. Address of Manufacturer:(58km, National 3th Highway), VEAS POU VILLAGE KHVAV COMMUNE, SAMRONG DISTRICT, TAKEO Factory:MEKO INTELLIGENT (CAMBODIA) CO., LTD. Address of Factory:(58km, National 3th Highway), VEAS POU VILLAGE KHVAV COMMUNE, SAMRONG DISTRICT, TAKEO Product Name:remote control Model No.: BO1411-MK2025 Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2025-12-11 Date of Test: 2025-12-19 to 2026-03-05 Date of Issue: 2026-03-11 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251200197601 Page: 2 of 28 Revision Record VersionReport No.DateRemark 01GZCR2512001976012026-03-11Original Authorized for issue by: Luke Lin/Project Engineer Approved By Vico Cui/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251200197601 Page: 3 of 28 2Test Summary Radio Spectrum Technical Requirement ItemStandardMethodRequirementResult Antenna Requirement 47 CFR Part 15, Subpart C 15.231 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part ItemStandardMethodRequirementResult 20dB Bandwidth ANSI C63.10 (2020) Section 6.9.2 47 CFR Part 15, Subpart C 15.231(c) Pass Dwell Time (15.231(a1)) ANSI C63.10 (2020) Section 7.4 47 CFR Part 15, Subpart C 15.231(a1) Pass Radiated Emissions below 1GHz ANSI C63.10 (2020) Section 6.4&6.5 47 CFR Part 15C Section 15.231(b) and 15.209 Pass Field Strength of the Fundamental Signal (15.231(b)) ANSI C63.10 (2020) Section 6.5 47 CFR Part 15, Subpart C 15.231(b) Pass Radiated Emissions above 1GHz 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2020) Section 6.6 47 CFR Part 15C Section 15.231(b) and 15.209 Pass Note: E.U.T./EUT means Equipment Under Test. Pass means the test result passed the test standard requirement, please find the detailed decision rule in the report relative section. N/A: Not applicable. SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-TRF-01 Rev 2.1 Report No.: GZCR251200197601 Page: 4 of 28 3Contents Page 1Cover Page.................................................................................................................................................1 2Test Summary............................................................................................................................................3 3Contents.....................................................................................................................................................4 4General Information...................................................................................................................................6 4.1Details of E.U.T...................................................................................................................................6 4.2Description of Support Units................................................................................................................6 4.3Measurement Uncertainty...................................................................................................................6 4.4Test Location.......................................................................................................................................6 4.5Test Facility.........................................................................................................................................7 4.6Deviation from Standards....................................................................................................................7 4.7Abnormalities from Standard Conditions.............................................................................................7 5Equipment List...........................................................................................................................................8 6Radio Spectrum Technical Requirement...............................................................................................10 6.1Antenna Requirement.......................................................................................................................10 6.1.1Test Requirement:........................................................................................................................10 6.1.2Conclusion....................................................................................................................................10 7Radio Spectrum Matter Test Results.....................................................................................................11 7.120dB Bandwidth................................................................................................................................11 7.1.1E.U.T. Operation...........................................................................................................................11 7.1.2Test Mode Description..................................................................................................................11 7.1.3Test Setup Diagram......................................................................................................................11 7.1.4Measurement Procedure and Data..............................................................................................12 7.2Dwell Time (15.231(a1))....................................................................................................................13 7.2.1E.U.T. Operation........................................................................................................…
Text truncated - open the document above for the full version.
Test Setup Photos
SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 1 of 4 Appendix - Test Setup Photo for GZCR251200197601 Test Model No.: BO1411-MK2025 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 2 of 4 Test Setup Photo Radiated Emissions below 1GHz & Field Strength of the Fundamental Signal (15.231(b)) SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Guangzhou Branch EMC-ARF-04 Rev 1.1 Page: 4 of 4 Radiated Emissions above 1GHz - End of the Appendix -
Contact Information
Applicant
Luke Toppel
[email protected]Fax: 847-808-1133
Technical Contact
Good Earth Lighting,Inc.Luke Toppel
[email protected]Fax: 847-808-1133
2100 Golf Road, Suite 460 · Rolling Meadows, Illinois, 60008 · United States
Test Firm
SGS-CSTC Standards Technical Services Co., Ltd.Bonnie Liao
Technical Specifications
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15.231 | 433.92 MHz - 433.92 MHz | - |
Other Applications from Good Earth Lighting,Inc.
2BOMA-FP1247
Dec 31, 2025Fixed luminaires
Equipment Class
DTS - Digital Transmission System