2BPRY-19303V2Commander Gateway100

EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Section 2.911(d)(5)(i) Certification – EquipmentType Company name: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa Product Name: Commander Gateway100 FCC ID: 2BPRY-19303V2 Model(s): M-001-193-03-V2 2.911(d)(5)(i) EquipmentType We, [EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Signature: Name: Hermi Du Plessis Date: 2025-11-10 Title and Company name: Engineering Manager and EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa Product Name: Commander Gateway100 FCC ID: 2BPRY-19303V2 Model(s): M-001-193-03-V2 2.911(d)(5)(ii) Applicant filing We, [EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Signature: Name: Hermi Du Plessis Date: 2025-11-10 Title and Company name: Engineering Manager and EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD * the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. U.S. Agent Designation for Service of Process - Certification Attestation Letter Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID:2BPRY-19303V2 FRN of applicant: 0035606755 Per section 2.911(d)(7) of the FCC rules, EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: GLOCERTS TECHNOLOGY INC FCC Registration Number (FRN): 0036339737 Physical U.S. Company Address: 19784 SUNKISSED RIDGE DR, RIVERSIDE, CA 92507 Contact Person: Huiying Fan Agent Email Address:[email protected] Telephone No: (626) 588-8039 The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Signed: Printed name: Hermi Du Plessis Title: Engineering Manager Company Name: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Date: 2/6/2026 Agent Signed: Signed: Printed name: Huiying Fan Title: Director Company Name: GLOCERTS TECHNOLOGY INC Date: 2/6/2026

Agent Authorization Company: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa ProductName: Commander Gateway100 Model Number(s): M-001-193-03-V2 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2025-11-10 Name: Hermi Du Plessis Title: Engineering Manager Company: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD

EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025-11-10 Subject; Request for Confidentiality FCC ID: 2BPRY-19303V2 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Pursuant to Public Notice DA 04-1705 of the Commission' s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuanttoKDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Hermi Du Plessis Title: Engineering Manager

Bottom Top

FCC ID: 2BPRY-19303V2 RF Exposure Evaluation According to 447498 D04 Interim General RF Exposure Guidance v01 Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. Frequency(MHz) Field Strength (dBuv/m) erp(mW) limit (mW) 0.125 62.94 0.00009 1 according to ANSI C63.10 where: F＜30MHz: EIRP[dBm] =E[dBuV/m] - 95.2- 6 ERP = EIRP-2.15dB E = Field Strength (dBuv/m) So ERP=62.94-95.2-6-2.15=-40.41dBm So a SAR test is not required.

Global United Technology Services Co., Ltd. Report No.: GTS2025020171F01 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 19 TEST REPORT Applicant: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address of Applicant: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa Manufacturer/Factory: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address of Manufacturer/Factory: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa Equipment Under Test (EUT) Product Name: Commander Gateway100 Model No.: M-001-193-03-V2 Trade Mark: Titan FCC ID: 2BPRY-19303V2 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Date of sample receipt: April 01, 2025 Date of Test: April 11, 2025-October 26, 2025 Date of report issued: October 26, 2025 Test Result : PASS * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS2025020171F01 Page 2 of 19 Page 2 of 19 2 Version Version No. Date Description 00 October 26, 2025 Original Tested By: Date: October 26, 2025 Test Engineer Prepared By: Date: October 26, 2025 Project Engineer Check By: Date: October 26, 2025 Reviewer Report No.: GTS2025020171F01 Page 3 of 19 Page 3 of 19 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 6 5.3 TEST FACILITY .................................................................................................................................... 6 5.4 TEST LOCATION .................................................................................................................................. 6 5.5 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 ANTENNA REQUIREMENT: .................................................................................................................... 9 7.2 CONDUCTED EMISSIONS ................................................................................................................... 10 7.3 RADIATED EMISSION ......................................................................................................................... 13 7.4 OCCUPIED BANDWIDTH ..................................................................................................................... 18 8 TEST SETUP PHOTO ............................................................................................................................ 19 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 19 Report No.: GTS2025020171F01 Page 4 of 19 Page 4 of 19 4 Test Summary Test Item Section in CFR 47 Result Antenna Requirement 15.203 Pass AC Power Line Conducted Emission 15.207 Pass Radiated Emission 15.209 Pass 20dB Emission Bandwidth 15.215 Pass Remark: 1. Pass: The EUT complies with the essential requirements in the standard. 4.1 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 9kHz-30MHz 3.1dB (1) Radiated Emission 30MHz-200MHz 3.8039dB (1) Radiated Emission 200MHz-1GHz 3.9679dB (1) Radiated Emission 1GHz-18GHz 4.29dB (1) AC Power Line Conducted Emission 0.15MHz ~ 30MHz 3.44dB (1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. Report No.: GTS2025020171F01 Page 5 of 19 Page 5 of 19 5 General Information 5.1 General Description of EUT Product Name: Commander Gateway100 Model No.: M-001-193-03-V2 S/N: 001-193-03-V2-00118 Test sample(s) ID: GTS2025020171-1 Sample(s) Status Engineered sample Operation Frequency: 125kHz Channel Number: 1 Modulation: ASK Antenna type: Internal Antenna Antenna gain: 0dBi(declare by applicant) Power supply: DC 7-35V Disclaimer statement: 1. Antenna gain information provided by the customer, and the laboratory is not responsible for its authenticity. 2. The information in this section is provided by the applicant or manufacturer, GTS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Report No.: GTS2025020171F01 Page 6 of 19 Page 6 of 19 5.2 Test mode Transmitter mode Keep the EUT in continuously transmitting. 5.3 Test Facility The test facility is recognized, certified, or accredited by the following org…

Text truncated - open the document above for the full version.

53 PKE emitter antennas SEA SMD Small Emitter Antenna Characteristics This part can be used as emitter antenna of a RF application in low frequency range and can be mounted like any other SMD component, directly to the PCB. Some use example: telemetric, telecontrol, atomic watch, PKE, etc. Size of this component compared to other existing emitter antennas is very small. Mechanical dimensions Dimensions in mm Nomenclature description 50.80x10.60x6.80mm (33 uH - 470 uH) - Small size (50.8 x 10.6 x 6.8). - High stability in temperature (-40ºC up to +85ºC). - Wide working range (20kHz - 150KHz). - SMD mounting. - Custom inductance value under demand. -Gain 0dbi Electrical diagram and recommended pad layout Add under the chart: This chart is a reference guide for the most common required values at working frequency of 20 kHz, 125 kHz or 134.2 kHz. Any other inductance value at LF or tighter tolerances can be provided. Please contact our sales department for any inquiry. Sensitivity measured with Helmholtz coils H=8.36 App/m @125 kHz. Contact us for measurement speci!cation Electrical speci!cations P/N L (mH) Tolerance Cres (nF) SRF (MHz) Freq. (kHz) SEA-A-0192J 0.1925%330>320@ SEA-B-0345J 0.3455%4.7>3125@ SEA-B-0500J 0.5005%3.3>3125@ SEA-B-0734J 0.7345%2.2>3125@ SEA-C-0300J 0.3005%4.7>3134,2@