2BPRY-21303V2Pulse560

EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Section 2.911(d)(5)(i) Certification – EquipmentType Company name: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa Product Name: Pulse560 FCC ID: 2BPRY-21303V2 Model(s): M-001-213-03-V2 2.911(d)(5)(i) EquipmentType We, [EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Signature: Name: Hermi Du Plessis Date: 2025-11-10 Title and Company name: Engineering Manager and EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa Product Name: Pulse560 FCC ID: 2BPRY-21303V2 Model(s): M-001-213-03-V2 2.911(d)(5)(ii) Applicant filing We, [EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Signature: Name: Hermi Du Plessis Date: 2025-11-10 Title and Company name: Engineering Manager and EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Epiroc Digital Safety Solutions South Africa Document number: M-̐̐̑ =̒̑̓-̐̓ -V ̒-LET-USA-̐̑ -̐̐̔ -EN 1st Floor Agnone House 51 Adriana Cresent Centurion Gauteng 0157 Directors: Marcus Carlson Ashleigh Braddock Schalk Janse van Rensburg Telephone: +27 (0)12 661 4828 epiroc.com Reg. No: 2012/127004/07 June ̖̒, ̒̐̒̕ Federal Communications Commission Authorization and Evaluation Division ̗̔̓̕ Oakland Mills Road Columbia, MD ̖̒̑̐̔ USA U.S. Agent Designation for Service of Process – Certification Attestation Letter ATTN: Reviewing Engineer FCC ID : ̒BPRY -̒̑̓̐̓ V̒ Product number: M- ̐̐̑ -̒̑̓-̐̓-V̒ FRN of applicant : ̖̖̗̐̐̓̐̕̕̕ Per section ̒.̙̑̑(d)( ̗) of t he FCC rules, Epiroc Digital Safety Solutions South Africa (Pty) Ltd. certifies that the equipment for which authorization is sought is designated to the following U.S. agent for service of process: Company Name: Global Product Services and Consultation LLC FCC Registration Number (FRN): ̖̗̐̐̓̓̔̐̐̓ Physical U.S. Company Address: ̘̓̒ W Palm Ave, Monrovia, CA ̙̖̑̐̑, Unites States Contact Person : Michael Chan Agent Email Address : [email protected] Telephone No: (̖̖̒ ) ̖̖̓ -̘̔̓̕ The above contact person accepts the obligation for service of process. Epiroc Digital Safety Solutions South Africa Document number: M-̐̐̑=̒̑̓-̐̓-V̒-LET-USA-̐̑-̐̐̔-EN 1st Floor Agnone House 51 Adriana Cresent Centurion Gauteng 0157 Directors: Marcus Carlson Ashleigh Braddock Schalk Janse van Rensburg Telephone: +27 (0)12 661 4828 epiroc.com Reg. No: 2012/127004/07 The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Agent Hermi du Plessis Michael Chan Engineering manager Technical director Epiroc Digital Safety Solutions South Africa (Pty) Ltd Global Product Services and Consultation LLC [email protected] [email protected] Date : 09-09-2025 SC5097723

EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025-11-10 Subject; Request for Confidentiality FCC ID: 2BPRY-21303V2 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description Pursuant to Public Notice DA 04-1705 of the Commission' s policy, in order to comply with the marketing regulations in 47 CFT §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuanttoKDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Hermi Du Plessis Title: Engineering Manager

Agent Authorization Company: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa ProductName: Pulse560 Model Number(s): M-001-213-03-V2 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2025-11-10 Name: Hermi Du Plessis Title: Engineering Manager Company: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD

Label location

FCC ID: 2BPRY-21303V2 RF Exposure evaluation According to 447498 D04 Interim General RF Exposure Guidance v01 Frequency(MHz) Field Strength (dBuv/m) erp(mW) limit (mW) min. distance (cm) 915.3 89.55 0.26 1867.21 20 915.98 93.36 0.63 1868.60 20 According to ANSI C63.10 Where: EIRP[dBm] =E[dBμV/m] - 95.2-4.7 ERP = EIRP-2.15dB E = Field Strength (dBuv/m) 915.3MHz and 915.98MHz has no simultaneous transmission.Then SAR evaluation is not required FCC ID: 2BPRY-21303V2 According to 447498 D04 Interim General RF Exposure Guidance v01 Per § 1.1307(b)(3)(i)(A), a single RF source is exempt RF device (from the requirement to show data demonstrating compliance to RF exposure limits, as previously mentioned) if the available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption applies to all operating configurations and exposure conditions, for the frequency range 100 kHz to 100 GHz, regardless of fixed, mobile, or portable device exposure conditions. This is a standalone exemption, and it cannot be applied in conjunction with any other test exemption. Frequency(MHz) Field Strength (dBuv/m) erp(mW) limit (mW) 0.125 60.47 0.000052 1 according to ANSI C63.10 where: F＜30MHz: EIRP[dBm] =E[dBuV/m] - 95.2- 6 ERP = EIRP-2.15dB E = Field Strength (dBuv/m) So ERP=60.47-95.2-6-2.15=-42.88dBm So a SAR test is not required

Antennaspecification125KHz-Pulse560 Antenna manufacturer EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Operation Frequency 125KHz Modulation LF Antenna gain max (peak) 0dBi

Global United Technology Services Co., Ltd. Report No.: GTS2025020167F02 Authorized Signature: Robinson Luo Laboratory Manager This results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Page 1 of 19 TEST REPORT Applicant: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address of Applicant: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa Manufacturer/Factory: EPIROC DIGITAL SAFETY SOLUTIONS SOUTH AFRICA (PTY) LTD Address of Manufacturer/Factory: 51 Adriana Crescent, Gateway Business Park, Centurion, South Africa Equipment Under Test (EUT) Product Name: Pulse560 Model No.: M-001-213-03-V2 FCC ID: 2BPRY-21303V2 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Date of sample receipt: March 08, 2025 Date of Test: March 09, 2025-August 24, 2025 Date of report issued: August 25, 2025 Test Result : PASS * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTS2025020167F02 Page 2 of 19 Page 2 of 19 2 Version Version No. Date Description 00 August 25, 2025 Original Tested By: Date: August 25, 2025 Test Engineer Prepared By: Date: May 23, 2025 Project Engineer Check By: Date: May 23, 2025 Reviewer Report No.: GTS2025020167F02 Page 3 of 19 Page 3 of 19 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 4.1 MEASUREMENT UNCERTAINTY ............................................................................................................ 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.2 TEST MODE ........................................................................................................................................ 6 5.3 TEST FACILITY .................................................................................................................................... 6 5.4 TEST LOCATION .................................................................................................................................. 6 5.5 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 6 TEST INSTRUMENTS LIST ..................................................................................................................... 7 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 ANTENNA REQUIREMENT: .................................................................................................................... 9 7.2 CONDUCTED EMISSIONS ................................................................................................................... 10 7.3 RADIATED EMISSION ......................................................................................................................... 13 7.4 OCCUPIED BANDWIDTH ..................................................................................................................... 18 8 TEST SETUP PHOTO ............................................................................................................................ 19 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 19 Report No.: GTS2025020167F02 Page 4 of 19 Page 4 of 19 4 Test Summary Test Item Section in CFR 47 Result Antenna Requirement 15.203 Pass AC Power Line Conducted Emission 15.207 Pass Radiated Emission 15.209 Pass 20dB Emission Bandwidth 15.215 Pass Remark: 1. Pass: The EUT complies with the essential requirements in the standard. 2. N/A: Not applicable. 4.1 Measurement Uncertainty Test Item Frequency Range Measurement Uncertainty Notes Radiated Emission 9kHz-30MHz 3.1dB (1) Radiated Emission 30MHz-200MHz 3.8039dB (1) Radiated Emission 200MHz-1GHz 3.9679dB (1) Radiated Emission 1GHz-18GHz 4.29dB (1) AC Power Line Conducted Emission 0.15MHz ~ 30MHz 3.44dB (1) Note (1): The measurement uncertainty is for coverage factor of k=2 and a level of confidence of 95%. Report No.: GTS2025020167F02 Page 5 of 19 Page 5 of 19 5 General Information 5.1 General Description of EUT Product Name: Pulse560 Model No.: M-001-213-03-V2 S/N: 001-213-03-V2-0003 Test sample(s) ID: GTS2025020167-1 Sample(s) Status Engineered sample Operation Frequency: 125kHz Channel Number: 1 Modulation: OOK Antenna type: Internal Antenna Antenna gain: 0dBi Power supply: DC 9-32V Disclaimer statement: 1. Antenna gain information provided by the customer, and the laboratory is not responsible for its authenticity. 2. The information in this section is provided by the applicant or manufacturer, GTS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Report No.: GTS2025020167F02 Page 6 of 19 Page 6 of 19 5.2 Test mode Transmitter mode Keep the EUT in continuously transmitting. 5.3 Test Facility The test facility is recognized, certified, or accredited by the following organizations: ● FCC—Registration No.: 381383 Designatio…

Text truncated - open the document above for the full version.