2BPSE-RF40HGAME CONSOLE

Instructions for Power On and Off: Power On: Press and hold the power button for 5 seconds. Wait patiently for about 25 seconds to enter the operation interface. Power Off: Press and hold the power button for 7 seconds to display the power-off menu. By default, press the A button to turn off the device. Note: Please exit the game before shutting down. Do not press any buttons when the system is starting up. Charging Instructions: When the red light on the host is on, please charge it in a timely manner. Connect the charging cable to the DC interface for charging. When it is fully charged, the red light will automatically turn off. Note: Do not press the reset button during the charging state. The charger must not exceed 5V2A. Function Shortcut Combinations: Fix System Bugs: L1+L2+R1+R2+(SELECT*3) Shortcut Combinations during the Game (except for PSP and NDS): Save Game Progress: SELECT+R1 Load Saved Game Progress: SELECT +L1 Exit the Game: （SELECT+START）*2 Display FPS: SELECT+B Pause the Game: SELECT+A RA Menu: SELECT+X Game acceleration start and stop: SELECT+R2 Game Screenshot: SELECT+Y Instructions for PSP Game Buttons: PSP Menu: SELECT+B PSP Save Game: Press SELECT+B to enter the PSP menu, select 1.settings > 2.system > 3.Auto loadsavestate > 4.slot 1> 5. Back > 6. save state for successful saving >7. Exit to menu to exit. Instructions for NDS Game Buttons: Press R2 to switch between vertical and horizontal screen display. Press L2 to display the full-screen switch. Press the right joystick: Use the stylus to click. Press the left joystick: Enter the game background menu. Kid Mode Setup/Unlock Set up Kid Mode: Press the START button,select “System Settings”, enter "User Interface Mode", select "Kid" and press A. Press B to return— a reminder pop-up will appear. Select "Yes" and press A to confirm. Kid Mode is now set up. Unlock Kid Mode: Press START, select UNLOCK USER INTERFACE MODE, press A, and press AAABA to unlock. How to set up a WiFi connection between two machines? Note: It is required that the game should support the two-player or multi-player battle mode. Setup Steps for the First Game Console Step 1：On the main interface, press the "START" button to enter the settings menu. Find the network settings and connect to an available Wi-Fi network. （Note: For multiplayer games with 2 or more players, all devices must be connected to the same Wi-Fi network.） Step 2：Logging IP Address.（Record the IP address for later steps.） Step 3：Open a game that supports multiplayer (2 or more players). Enter the game interface, then press "SELECT" + "X" to access the settings menu, and press the "B" button. Step 4：Find the "Host" option to start the network game. NOTE: At this point, the setup for the first game console is complete. Setup Steps for the Second Game Console Step 1：Press the “start” key in the main interface to enter the setting interface, find the network setting to connect an available WIFI. （Note: The Wi-Fi connection steps are the same as for setting up the first console.） Step 2: Once the Wi-Fi connection is successful, open the same game and enter the game interface. Press "SELECT" + "X" to access the settings menu, then press the "B" button. Step 3: Find the "Connect to Netplay Host" option. Step 4: Enter the IP address of the first console and press the "X" button to join the game. Step 5: If both consoles display the same screen, the connection is successful. Select the multiplayer mode to start the game. NOTE：Prioritize the setting to find the "host" as the main control of the game console to start the network game console and use it as the “Main Control Handle” 1. ①Press the start key in the main interface to enter the setting interface, find the network setting to connect an available wifi. ②Record the IP address for later use, and then find a double game. ③Enter the game interface and press “select”+“X” key to enter the setting interface and then press the “B” key. ④ Find host to start the network game. ⑤At this time the first console is set up. 2. After the WiFi connection of the other device is successful, find the same game to enter the game interface, and press “select”+“X” to enter the setting interface and then press “B” key. ①Find “connect to Netplay host”. ②Enter the IP address of the first host press the “X” key to enter the game. ③At this time the two hosts show the same screen indicates that the connection is successful, select the double mode to enter the game. How to Switch the Emulator Core? If the game cannot run, the main reason is that the emulator core does not support the game, which can be solved by changing the emulator core. Please select the game name with an error in the game list, hold down the "A" key for two seconds, select the second-to-last item "Advanced Game Options", and try to change the first item "Emulator" to a different core. If all the cores in the list cannot run the game, there may be a problem with the game ROM. Please provide feedback to me so that I can correct it! Core Selection Suggestions: (1) CPS1, 2, 3: Give priority to the FBAlpha2012 core, followed by the FBNeo core and other FBA cores; (2) FBNeo: Give priority to the FBNeo core, followed by FBAlpha2012 and other FBA cores; (3) MAME: Give priority to the FBNeo core, followed by MAME2010, and then other cores; (4) GBA: MGBA supports shortcut combinations, and GPSP supports game modification. How to Set Global Settings, Single Emulator Settings, and Single Game Settings? EE has three methods for setting games. The first is the global settings: Set it in the "Game Settings" section of the ES menu; the second is the emulator settings: "Game Settings-PERSYSTEMADVANCED CONFIGURATION" corresponds to different models; the third is the single game settings. Press and hold the A button on the game name and set it in the "Advanced Game Options" that appears. Note the priority: Individual game settings > Emulator settings > Global settings. How to Change the Theme? Press START to …

Text truncated - open the document above for the full version.

Rev 1/26/2023 (Shenzhen Xi Fan Technology Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 6, 2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BPSE-RF40H [Shenzhen Xi Fan Technology Co., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Shenzhen Xi Fan Technology Co., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Lemon feng) Rev 1/26/2023 (Shenzhen Xi Fan Technology Co., Ltd.) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 6, 2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BPSE-RF40H [Shenzhen Xi Fan Technology Co., Ltd.] certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Lemon feng)

Shenzhen Xi Fan Technology Co., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: February 6, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2BPSE-RF40H Shenzhen Xi Fan Technology Co., Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Shenzhen Xi Fan Technology Co., Ltd. FRN: 0037080017 Address: RM 1320# Caiyunxuan, Wanling Apartment, Xicheng Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, China Signature: Contact Person: Lemon feng Tel: 18211307641 Email: [email protected]

Shenzhen Xi Fan Technology Co., Ltd. Date: February 6, 2026 Product Model Number: RF40H, XF40H, XF35H, RF35H FCC ID: 2BPSE-RF40H To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Lemon feng Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 18211307641 On behalf of: Shenzhen Xi Fan Technology Co., Ltd.

Shenzhen Xi Fan Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 6, 2026 Subject; Request for Confidentiality FCC ID: 2BPSE-RF40H To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lemon feng Title: Manager

Shenzhen Xi Fan Technology Co., Ltd. Model Difference Statement Dear Sir/Madam, Date: February 6, 2026 FCC ID: 2BPSE-RF40H Added models XF40H, XF35H, RF35H basis of the original product RF40H The button sizes, speaker hole positions, appearance colors and model names of this series of products are different from those of the main model. However, their circuits and electronic structures are the same as the main model. This information has been confirmed by the manufacturer. Sincerely, Name: Lemon feng Company name: Shenzhen Xi Fan Technology Co., Ltd. Address: RM 1320# Caiyunxuan, Wanling Apartment, Xicheng Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, China

Summary Inverted F Antenna Specification ITEM ANT SPEC Model Name 2.4G ANT Center Frequency Horizontal Vertical 2400MHz 2400MHz 2500MHz 2400MHz 2400MHz 2500MHz -1.26-0.76-0.58-5.25-2.46-1.86 MAX. Gain -0.58dBi Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Antenna type PCB Antenna Impedance 50 Ohm Manufacture Shenzhen Xi Fan Technology Co., Ltd. Address RM 1320# Caiyunxuan, Wanling Apartment, Xicheng Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, China unit：mm Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Frequency (MHz) Gain(dBi) Max Min Avg 2400 -1.26174-30.0801-7.18716 2450 -0.765802-36.5604-7.48023 2500 -0.585582-22.0315-6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Frequency (MHz) Gain(dBi) Max Min Avg 2400 -5.2537-22.1424-12.4294 2450 -2.4652-24.5837-10.4702 2500 -1.86120-29.5214-9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report Annex A. EUT External Photos RF40H EUT View 1 EUT View 2 Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT View 7 EUT View 8 Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT View 9 EUT View 10 Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT View 11 EUT View 12 Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT View 13 EUT View 14 Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT View 15 EUT View 16

Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label Location

Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report Annex B. EUT Internal Photos EUT Internal View 1 EUT Internal View 2 Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT Internal View 3 EUT Internal View 4 PCB Antenna Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report EUT Internal View 5 EUT Internal View 6

FCC ID: 2BPSE-RF40H RF Exposure Evaluation According to KDB 447498 D01 General RF Exposure Guidance v06 and part 2.1093，Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. For 2.4GWiFi Max Conducted Power(dBm) Tune-up Power(dBm) Max Tune-up Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 7.74 7(±1) 8 6.310 2437 5 1.970094 3.0 So a SAR test is not required

Report No: SSP26010239-1E FCC Test Report Page 1 of 48 FCC TEST REPORT FCC ID: 2BPSE-RF40H Report No. : SSP26010239-1E Applicant : Shenzhen Xi Fan Technology Co., Ltd. Product Name : GAME CONSOLE Model Name : RF40H Test Standard : FCC Part 15.247 Date of Issue : 2026-01-28 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26010239-1E FCC Test Report Page 2 of 48 Test Report Basic Information Applicant..................................: Shenzhen Xi Fan Technology Co., Ltd. Address of Applicant...............: RM 1320# Caiyunxuan, Wanling Apartment, Xicheng Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, China Manufacturer..........................: Shenzhen Xi Fan Technology Co., Ltd. Address of Manufacturer........: RM 1320# Caiyunxuan, Wanling Apartment, Xicheng Industrial Zone, Xixiang Street, Bao'an District, Shenzhen, China Product Name.........................: GAME CONSOLE Brand Name.............................: - Main Model..............................: RF40H Series Models..........................: XF40H, XF35H, RF35H Test Standard..........................: FCC Part 15 Subpart C KDB 558074 D01 15.247 Meas Guidance v05r02 ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-01-08 to 2026-01-19 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26010239-1E FCC Test Report Page 3 of 48 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................9 2. Summary of Test Results ........................................................................................................................................... 10 3. Antenna Requirement ............................................................................................................................................... 11 3.1 Standard and Limit.............................................................................................................................................. 11 3.2 Test Result .......................................................................................................................................................... 11 4. Conducted Emissions ................................................................................................................................................ 12 4.1 Standard and Limit.............................................................................................................................................. 12 4.2 Test Procedure.................................................................................................................................................... 12 4.3 Test Data and Results .......................................................................................................................................... 13 5. Radiated Emissions ................................................................................................................................................... 16 5.1 Standard and Limit.............................................................................................................................................. 16 5.2 Test Procedure.................................................................................................................................................... 16 5.3 Test Data and Results .......................................................................................................................................... 18 6. Band-edge Emissions(Radiated) ............................................................................................................................... 22 6.1 Standard and Limit.............................................................................................................................................. 22 6.2 Test Procedure.................................................................................................................................................... 22 6.3 Test Data and Results .....................................................................................................…

Text truncated - open the document above for the full version.

Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View Below 1GHz Report No: SSP26010239-1E FCC ID: 2BPSE-RF40H Annex of Test Report Radiated Emission Test View Above 1GHz