2BRS4-NPSUGMDHBWireless Node Controller

MOONS’ Electric (Taicang) Co., Ltd. No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Jan. 21, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID:2BRS4-NPSUGMDHB MOONS’ Electric (Taicang) Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Shiwei Chen Title: Manager Address: No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Tel.: +86 0512-80601066 Email: [email protected]

1 | P a g e MOONS’ Electric (Taicang) Co., Ltd. No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Attestation Statements To: Federal Communications Commission Date: Jan. 21, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2BRS4-NPSUGMDHB] Product Name: [Wireless Node Controller] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature: Printed Name: Shiwei Chen Title: Manager Address: No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Tel.: +86 0512-80601066 Email: [email protected] 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

MOONS’ Electric (Taicang) Co., Ltd. No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: Jan. 21, 26 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID:2BRS4-NPSUGMDHB [MOONS’ Electric (Taicang) Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, [MOONS’ INDUSTRIES AMERICA, INC] (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. [MOONS’ INDUSTRIES AMERICA, INC] ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: MOONS’ INDUSTRIES AMERICA, INC FRN: 0037511813 Address:1113 North Prospect Ave, Itasca, IL 60532 United States Signature: Contact Person: Qianghua Xu Tel: (630) 833-5940 13 Email: [email protected] Applicant Signature: Company Name: MOONS’Electric (Taicang) Co., Ltd. FRN: 0037420833 Address: No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Contact Person: Shiwei Chen Tel: +86 0512-80601066 Email: [email protected]

MOONS’ Electric (Taicang) Co., Ltd. No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China 1/21/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID:2BRS4-NPSUGMDHB Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. ⎯ User Manual ⎯ Internal Photos ⎯ Test Setup Photos Sincerely, (Signature) Printed Name: Shiwei Chen Title: Manager Address: No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Tel.: +86 0512-80601066 Email: [email protected]

MOONS’ Electric (Taicang) Co., Ltd. No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Date: Jan. 21, 26 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID:2BRS4-NPSUGMDHB I, the undersigned, hereby authorize (Shenzhen DL Testing Technology Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen DL Testing Technology Co., Ltd.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (MOONS’ Electric (Taicang) Co., Ltd.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Applicant Signature: Printed Name: Shiwei Chen Title: Manager Address: No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Tel.: +86 0512-80601066 Email: [email protected]

FCC ID:2BRS4-NPSUGMDHB EUT PHOTO(External Photos) ANT 1 ANT 2 ANT 3 FCC ID:2BRS4-NPSUGMDHB FCC ID:2BRS4-NPSUGMDHB FCC ID:2BRS4-NPSUGMDHB FCC ID:2BRS4-NPSUGMDHB FCC ID:2BRS4-NPSUGMDHB

Label & label location 20mm*10mm FCC ID:2BRS4-NPSUGMDHB Label location

FCC ID:2BRS4-NPSUGMDHB RF EXPOSURE EVALUATION Limits According KDB 447498 D01 General RF Exposure Guidance v06. The RF exposure evaluation requirements of §2.1091 for mobile device exposure conditions subject to MPE limits: Requirements of this section are a consequence of Commission responsibilities under the National Environmental Policy Act to evaluate the environmental significance of its actions. See subpart I of part 1 of this chapter, in particular § 1.1307(b). For purposes of this section, the definitions in § 1.1307(b)(2) of this chapter shall apply. A mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the RF source's radiating structure(s) and the body of the user or nearby persons. In this context, the term “fixed location” means that the device is physically secured at one location and is not able to be easily moved to another location while transmitting. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal desktop computer, are considered to be mobile devices if they meet the 20-centimeter separation requirement. The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b). Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm 2 ) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposures 0.3–3.0 614 1.63 *(100) 6 3.0–30 1842/f 4.89/f *(900/f 2 ) 6 30–300 61.4 0.163 1.0 6 300–1500 f/300 6 1500–100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3–1.34 614 1.63 *(100) 30 1.34–30 824/f 2.19/f *(180/f 2 ) 30 30–300 27.5 0.073 0.2 30 300–1500 f/1500 30 1500–100,000 1.0 30 f = frequency in MHz Friis transmission formula: Pd = (Pout*G)/(4*pi*r 2 ) Where Pd = power density in mW/cm 2 , Pout = output power to antenna in mW; G = gain of antenna in linear scale, Pi = 3.1416; R = distance between observation point and center of the radiator in cm Pd id the limit of MPE, 1 mW/cm 2 . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. Test Result of RF Exposure Evaluation Mode Output power to antenna (dBm) Tune UP tolerance (dBm) Max Tune UP power (dBm) Max Tune UP power (mW) Power Density at R=20cm (mW/cm2) Limit (mW/cm2) Result OQFSK 20.91 20±1 21 125.89 0.05367 0.6 PASS The best case antenna gain: 3.31dBi

Shanghai SunnywayCommunication Technology Limited Company Temporary antenna specification Customer：MOONS’The project：A8768 Operating frequency band：915MHz Motherboard version： Shangyuanmaterial specifications Specifications and modelsShangyuanmaterial numberCustomer part number WPAN SH25439IB56-2 The record of project changes Date of preparation/changeChangesChange of personversion Sunnywaycounter-signature bar Research and development ME：Auditor： QE： Approver： RF：Auditor： Client Counter-signature bar EEPMRFQE Tel：＋86-021-60835368（Shanghai）；＋86-0755-82504258（Shenzhen） Shanghai R&D Center Address: 1st Floor, Building 4, No. 99, Lane 215, GaoguangRoad, QingpuDistrict, Shanghai Shenzhen R & D Center Address: Shenzhen GuangmingDistrict South TaiyunChuangguCenter 5 Building 6 floor Chongqing R&D Center Address: C08-1 Building-1, No. 19 XiantaoData Valley East Road, YubeiDistrict, Chongqing 目录 1. Project picture............................................................................3 2．Test fixtures.......................................................................................4 3.Matching circuits.................................................................................. 4 4.S11 test...................................................................................................5 4.1 S11 Test Method Description..............................................................................5 4.2S11 parameter.......................................................................................................55 . DARKROOM TEST DATA.........................................................................6 5.1 Passive test data.................................................................................................6 6.Prototype grounding treatment....................................................9 7.Mass production antenna indicators................................................9 8 D r a w i n g...............................................................................................10 Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition 1.Project information Machine information Antenna information Note: The customer finally verified that the antenna performance prototype was retained in our company for at least one year, which is convenient for analysis and solution to abnormal situations in antenna mass production. Ensure antenna shipment quality. Version Elbow Antenna V0.1 Antenna form PIFA antenna 弯头 3.Matching circuits 2．Test fixtures Purpose: To test the passive parameters of the antenna as accurately as possible. How to make: The prototyping mechanism is made of a 50 ohm coaxial cable, one end is connected to the test point at the back of the matching circuit of the prototype motherboard (the front of the RF test hole), and the other end is connected to the SMA connector. The schematic diagram is as follows: Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition 4.2S11 parameter StraightheadAntenna 4.S11 test 5.4.1 S11 Test Method Description 6.Test Equipment: Network Analyzer (E5071C) 7.Test method: A 50 ohm CABLE cableis derived from the instrument test port, and the SMA connector of the prototype is connected after calibration using the calibrator to record the return loss and standing wave ratio corresponding to the relevant frequency point. The test diagram is as follows: Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition Test the schematic StraightheadAntenna requency （MHz） Log Mag 868 -12.2 715 -10.3 915 -19.7 930 -18.3 5Darkroom testdata Test system: Shieldeddarkroom Test environment: temperature 22°C±3°C,humidity 50%±15% Test equipment: When testing passive data, usethe Network Analyzer Agilent E5062C When testing active data, the ComprehensiveTester Agilent 8960 /CMW500/E4438C isused Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition 5.1Passive test data StraightheadAntennefficiency Elbow Antenna FrequencyEfficiencyEfficiencyMax Gain (MHz)(dB)(%)(dBi) 900-3.0949.092.59 901-3.1248.752.55 902-3.2147.752.47 903-3.2647.212.4 904-3.247.862.43 905-3.0249.892.56 906-2.951.292.66 907-2.7652.972.85 908-2.6953.832.94 909-2.7553.092.87 910-2.8951.42.69 911-2.9650.582.58 912-2.9950.232.5 913-2.9550.72.47 914-2.8651.762.53 915-2.852.482.64 916-2.6953.832.81 917-2.6953.832.77 918-2.7453.212.62 919-2.7852.722.51 920-2.7153.582.57 921-2.7752.842.45 922-2.7253.462.52 923-2.9251.052.64 924-2.8651.762.69 925-2.9251.052.55 926-2.9151.172.43 927-2.9650.582.26 928-350.122.17 929-2.9850.352.21 930-2.8751.642.36 Straightheadantenna 3D diagram Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition Straightheadantenna 2D diagram Phi 0 2D Phi 90 2D Theta 90 2D 6.Prototype grounding treatment Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition 7.Mass production antenna indicators When the antenna is mass-produced, the standing wave ratio is used as the mass production test standard. According to the differences in the project itself, the following criteria are given: frequency（MHz） Mass production standards 868-930MHz VSWR（Massproduction performance） <VSWR(Acknowledge performance)+1 8Drawings Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition

Shanghai SunnywayCommunication Technology Limited Company Temporary antenna specification Customer：MOONS’The project：A8768 Operating frequency band：915MHz Motherboard version： Shangyuanmaterial specifications Specifications and modelsShangyuanmaterial numberCustomer part number WPAN SH25439IB56-1 The record of project changes Date of preparation/changeChangesChange of personversion Sunnywaycounter-signature bar Research and development ME：Auditor： QE： Approver： RF：Auditor： Client Counter-signature bar EEPMRFQE Tel：＋86-021-60835368（Shanghai）；＋86-0755-82504258（Shenzhen） Shanghai R&D Center Address: 1st Floor, Building 4, No. 99, Lane 215, GaoguangRoad, QingpuDistrict, Shanghai Shenzhen R & D Center Address: Shenzhen GuangmingDistrict South TaiyunChuangguCenter 5 Building 6 floor Chongqing R&D Center Address: C08-1 Building-1, No. 19 XiantaoData Valley East Road, YubeiDistrict, Chongqing 目录 1. Project picture............................................................................3 2．Test fixtures.......................................................................................4 3.Matching circuits.................................................................................. 4 4.S11 test...................................................................................................5 4.1 S11 Test Method Description..............................................................................5 4.2S11 parameter.......................................................................................................55 . DARKROOM TEST DATA.........................................................................6 5.1 Passive test data.................................................................................................6 6.Prototype grounding treatment....................................................9 7.Mass production antenna indicators................................................9 8 D r a w i n g...............................................................................................10 Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition 1.Project information Machine information Antenna information Note: The customer finally verified that the antenna performance prototype was retained in our company for at least one year, which is convenient for analysis and solution to abnormal situations in antenna mass production. Ensure antenna shipment quality. Version StraightheadAntenna V0.1 Antenna form PIFA antenna 3.Matching circuits 2．Test fixtures Purpose: To test the passive parameters of the antenna as accurately as possible. How to make: The prototyping mechanism is made of a 50 ohm coaxial cable, one end is connected to the test point at the back of the matching circuit of the prototype motherboard (the front of the RF test hole), and the other end is connected to the SMA connector. The schematic diagram is as follows: Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition 4.2S11 parameter StraightheadAntenna 4.S11 test 5.4.1 S11 Test Method Description 6.Test Equipment: Network Analyzer (E5071C) 7.Test method: A 50 ohm CABLE cableis derived from the instrument test port, and the SMA connector of the prototype is connected after calibration using the calibrator to record the return loss and standing wave ratio corresponding to the relevant frequency point. The test diagram is as follows: Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition Test the schematic StraightheadAntenna requency （MHz） Log Mag 868 -14.2 715 -9.2 915 -22.2 930 -20.3 5Darkroom testdata Test system: Shieldeddarkroom Test environment: temperature 22°C±3°C,humidity 50%±15% Test equipment: When testing passive data, usethe Network Analyzer Agilent E5062C When testing active data, the ComprehensiveTester Agilent 8960 /CMW500/E4438C isused Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition 5.1Passive test data StraightheadAntennefficiency StraightheadAntenn FrequencyEfficiencyEfficiencyMax Gain (MHz)(dB)(%)(dBi) 900-2.9251.053.14 901-350.123 902-3.148.982.79 903-3.1548.422.76 904-3.1148.872.86 905-2.9550.73.07 906-2.8651.763.22 907-2.7752.843.31 908-2.7652.973.28 909-2.84523.11 910-3.01502.91 911-3.1148.872.77 912-3.1548.422.73 913-3.1348.642.76 914-3.0949.092.79 915-3.0849.22.73 916-3.0349.772.68 917-3.0749.322.52 918-3.1748.192.36 919-3.2247.642.29 920-3.1748.192.37 921-3.2647.212.33 922-3.2347.532.37 923-3.1648.312.41 924-3.1548.422.34 925-3.2647.212.09 926-3.3146.671.9 927-3.4245.51.69 928-3.544.671.57 929-3.544.671.56 930-3.4245.51.62 Straightheadantenna 3D diagram Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition Straightheadantenna 2D diagram Phi 0 2D Phi 90 2D Theta 90 2D 6.Prototype grounding treatment Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition 7.Mass production antenna indicators When the antenna is mass-produced, the standing wave ratio is used as the mass production test standard. According to the differences in the project itself, the following criteria are given: frequency（MHz） Mass production standards 868-930MHz VSWR（Massproduction performance） <VSWR(Acknowledge performance)+1 8Drawings Shanghai ShangyuanCommunication Technology Co., Ltd. antenna recognition

Frequency Efficiency Max Gain Mhz % dBi 900 42 1.20 902 41 1.07 904 42 1.20 906 42 1.20 908 41 1.07 910 40 0.56 912 39 0.37 914 41 1.07 916 43 1.50 918 41 0.91 920 43 1.53 922 43 1.50 924 42 1.20 926 41 1.07 928 40 0.56

C DL-Cert ert DL-Cert DL D L-Cert DL-Cert DL-Cer D L-Cert DL-Cert DL-Cert Cert D L-Cert DL-Cert DL-Cert DL-C DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Ce DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL- DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-C DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Ce L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-C L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert rt DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Ce DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-C L-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert rt DL-Cert DL-Cert DL-Cert D L-Cert DL-Ce DL-Cert DL-Cert DL-Cert D L-Cert DL Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert D L-C L-Cert DL-Cert rt DL-Cer DL Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-251209017R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 1 of 41 FCC Part 15C Test Report FCC ID:2BRS4-NPSUGMDHB Applicant: MOONS’ Electric (Taicang) Co., Ltd. Address: No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China Manufacturer: MOONS’ Electric (Taicang) Co., Ltd. Address: No.18, Yingang Road, Fuqiao Town, 215400 Taicang, Jiangsu Province, China EUT: Wireless Node Controller Trade Mark: Model Number: NPSUGMDHB Date of Receipt: Dec. 20, 2025 Test Date: Dec. 20, 2025 to Jan. 06, 2026 Date of Report: Jan. 06, 2026 Prepared By: Shenzhen DL Testing Technology Co., Ltd. Address: 101-201, Building C, Shuanghuan, No.8, Baoqing Roa Baolong Industrial Zone, Baolong Street, Longgang Shenzhen, Guangdong, China. Applicable Standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2020 Test Result: Pass Report Number: DLE-251209017R Prepared (Test Engineer): Dimon Tan Reviewer (Supervisor): Jack Bu Approved (Manager): Jade Yang This test report is based on a single evaluation of one sample of above mentioned products. It is not permitted to be duplicated in extracts without written approval of Shenzhen DL Testing Technology Co., Ltd. C DL-Cert ert DL-Cert DL D L-Cert DL-Cert DL-Cer D L-Cert DL-Cert DL-Cert Cert D L-Cert DL-Cert DL-Cert DL-C DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Ce DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL- DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-C DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert ert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Ce L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert D DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-C L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert rt DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Ce DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-C L-Cert DL-Cert DL-Cert DL-Cert D L-Cert DL-Cert rt DL-Cert DL-Cert DL-Cert D L-Cert DL-Ce DL-Cert DL-Cert DL-Cert D L-Cert DL Cert DL-Cert DL-Cert D L-Cert DL-Cert DL-Cert D L-C L-Cert DL-Cert rt DL-Cer DL Shenzhen DL Testing Technology Co., Ltd. Report No.: DLE-251209017R Test Report Tel: 400-688-3552 Web:www.dl-cert.com Email: [email protected] Page 2 of 41 Table of Contents Page 1.VERSION ............................................................................................................... 4 2. SUMMARY OF TEST RESULTS ........................................................................... 5 2.1 TEST FACILITY ......................................................................................................................... 6 2.2 MEASUREMENT UNCERTAINTY ............................................................................................ 6 3. GENERAL INFORMATION ................................................................................... 7 3.1 GENERAL DESCRIPTION OF EUT ......................................................................................... 7 3.2 DESCRIPTION OF TEST MODES ........................................................................................... 8 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED ...................... 9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) .…

Text truncated - open the document above for the full version.