2BRY3-GW100Wireless Power Bank

Unfolded the Fold-out Stand Name: Wireless Power BankModel No.: GW100Battery Type: Lithium PolymerMaterial: ABS+PC Press on/o ff button check the remaining electricity of the power bank on the Led display. The Product Size: 10.5*7*2.1cm 4.13*2.76*0.83inchNet Weight: 210g/ Energy Conversion: Rated Capacity: Battery Capacity: 10000mA h,38.5Wh 6000mAh ≥ 60% 7.4oz display will automatically turn o ff after about 30 seconds. The product is equipped with OTP over-temperature protection,when immediate charging afterfully discharged may activate the OTP protection(the indicator lightswill start fl ashing and then turn o ff , which means the product cannot be charged during this time; after the temperature cools down, it will resume back to normal charging). Connect the USB charging cable to the corresponding output port of the power bank,and the power bank will automatically tum on the output. Due to compatibility, some smartphones need to press the button to turn on the power output function, which is a normal phenomenon and need not be ignored. Press the key once to supply power to the extemal equipment. 1. Check whether the charging voltage of the digital product matches the output voltage of the product.2. Select the original charging cable of the digital product, one end is connected with thedigital product,and the other end is connected with the output port of the product. The wired output terminal of the product automatically tums on to charge the mobile phone or other digital products, and the digital display screen will always be on.3. Charge the mobile phone with a wireless charging function. When the phone is close tothe magnetic ring of the power bank, it will be adsorbed and start to charge immediately, and the digital display screen will always be on. Please read all instructions and wanings before using this product. Improper use will damagethe product or personal safety.1. The charging contact surface on the back of the mobile phone does not contain metal substances,such as iron sheets,rings,metal protective cases,etc.2. When the mobile phone is charging, if intermittent charging or serious heating is found, it is likely that the receiving coil of the mobile phone is not fully aligned with the wireless charging coil, and there are metal foreign bodies in the protective sleeve of the mobile phone. Please try to cool the mobile phone, remove the protective sleeve, and then align it in the nomal position.3. This product has an over-curent protection function. If the product is used improperly itwilltum o ff or reduce the output power, reduce the charging speed and ensure safety. Please check whether the equipment is used improperty or not.4. Do not let children use alone under 12-year, especially the accessories.5. Please use a dry soft cloth to clean the surface.Do notuse chemicals, oap, or detergent.6. Please don't dismantle the machine by yourself. The user's abnormal use or improper placement of this product may reduce the service life or damage the product. Therefore, the responsibility does not belong to the warranty responsibility or the manufacturer's responsibility. Please understand.7.There is a conversion rate in the powerbank,so the battery capacity of the power bank is not equal to the rechargeable capacity.8. Please charge your power bank regularly (at least 5 months is recommended) to maintain its long service life.9. Improper use of the product may easily result in the product itself or endanger the safety of personal and property.10. If consumers violate the product manual and improperly apply or warn, the personal and property damage caused by consumers and the company will not bear any legal responsibility.11. Non-professionals are strictly prohibited to decompose this product.12. Avoid using electrical appliances or loads that exceed the output current of the product (the circuit will be protected, no output).13. Avoid strong physical e ff ects, including knocking, throwing, trampling, squeezing, etc. Misuse, dropping, or excessive force may cause product damage.14. Store the product in a cool, dry place. Do not store the product in a hot or humid environment.Do not dispose of the product in heat or fi re. 15. Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fi re or injury to persons. 16. Operating temperature should be between 10°C to 45* / 50°F to 113°F 17. Storage Temperature range: -10 to 60 C18. When disposing of secondary cells or batteries, keep cells or batteries of di ff ernet electronchemical systems separate from each other. a. When connecting to the charging cable matching the mobile power interface, the electric quantity number of the display will fl ash, which means that the connection is normal and the power bank is charged.If there is no fl ash with the number,it means that the connection fails and there is no charging. Please check whether the charging cable is connected correctly. b. Use the power adapter/computer USB port to charge the local wireless charging mobilepower bank. The Type-C charging cable can be used to plug into the Type-C input port of the wireless charging power bank to charge the power bank. Connect the USB connector to the charger or the USB port of the computer,and the number of the power indicator will start to fl ash, indicating that the product is being. USB-C1 Port Input: 5VDC, 3A / 9VDC, 2A/ 12VDC,1.5AUSB-C1 Port Output: 5VDC, 3A / 9VDC, 2.22A 12VDC,1.67AUSB-C2 OutPut: 5VDC, 3A / 9VDC, 2A/ 12VDC,1.5AUSB-C Wire Input: 5VDC, 3A / 9VDC, 2A/ 12VDC,1.5AUSB-C Wire Output: 5VDC, 3A / 9VDC, 2.22A 12VDC,1.67AWatch Wireless Charging Output: 5WPhone Wireless Charging Output: 15W MaxTotal output: 5VDC, 3A(15W Max) Product parameter: Overview: To activate wireless charging,press the power button or place your device on the charger as illustrated below and it will be held in place magnetically.Note:After the phone is placed correctly,there may be a delay of 3-5 seconds,and …

Text truncated - open the document above for the full version.

Huizhou Huiyang Shunxuan Technology Co., Ltd. No. 397, Qiubao Road, Xintang Village, Qiuchang Street, Huiyang District, Huizhou GuangDong , China Date: 10-27-2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BRY3-GW100 FRN: 0037458460 US Agent – Attestation Statement / Part 2.911(d)(7) Huizhou Huiyang Shunxuan Technology Co., Ltd. certifies, that as of 10-27-2025, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BRY3-GW100 Huizhou Huiyang Shunxuan Technology Co., Ltd., accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of Huizhou Huiyang Shunxuan Technology Co., Ltd. for FCC ID: 2BRY3-GW100 Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Huizhou Huiyang Shunxuan Technology Co., Ltd. Designated Agent: FCC US Agent, LLC Company Representative: Xiaoqiang Yang Designated Agent Representative: Tim Payne Signature: Signature:

HuizhouHuiyangShunxuanTechnologyCo.,Ltd. Date:10-16-2025 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestforFCCID:2BRY3-GW100 [HuizhouHuiyangShunxuanTechnologyCo.,Ltd.](“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibited fromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, XiaoqiangYang (Applicantprintedname) HuizhouHuiyangShunxuanTechnologyCo.,Ltd. Date:09-05-2025 EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestforFCCID:2BRY3-GW100 [HuizhouHuiyangShunxuanTechnologyCo.,Ltd.](“theapplicant”)certifiesthat,asof thedateofthefilingoftheapplication,theapplicantisnotidentifiedontheCovered Listasanentityproducing“covered”equipment. Sincerely, XiaoqiangYang (Applicantprintedname)

HuizhouHuiyangShunxuanTechnologyCo.,Ltd. FCCID:2BRY3-GW100 POWEROFATTORNEY Date:Oct.16,2025 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 ToWhomItMayConcern: We,theundersigned,herebyauthorizeWaltekTestingGroupCo.,Ltd.(DevalQin) onourbehalf,toapplytotheFederalCommunicationsCommissiononour equipment.AnyandallactscarriedoutbyWaltekTestingGroupCo.,Ltd.(Deval Qin)onourbehalfshallhavethesameeffectasactsofourown.This authorizationexpiresonOct.15,2026. Sincerely, HuizhouHuiyangShunxuanTechnologyCo.,Ltd. Signature XiaoqiangYang/GeneralManager TypednameandTitle

HuizhouHuiyangShunxuanTechnologyCo.,Ltd. Date:Oct16,2025 FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2BRY3-GW100 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequest confidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName Long-termconfidentiality: Schematics BlockDiagram OperationalDescription Schematics.pdf BlockDiagram.pdf OperationalDescription.pdf Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleased tothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantand provideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrant forthisapplication. Sincerely, HuizhouHuiyangShunxuanTechnologyCo.,Ltd. Signature XiaoqiangYang/GeneralManager TypednameandTitle

Huizhou Huiyang Shunxuan Technology Co., Ltd. FCC ID: 2BRY3-GW100 Date: 10/23/2025 Subject: authorization for adding family models To whom it May concern, Statement We confirm the product Wireless Power Bank with models GW100, GW50A, GW70T, GW88E, GW96F are same in the Schematic, PCB layout, Operation description, BOM and Antenna. Only the model names are different. Yours sincerely, [signature] Xiaoqiang Yang General Manager Huizhou Huiyang Shunxuan Technology Co., Ltd.

Appendix- GW100-Photos Page 5 of 13 2. Photographs –Constructional Details 2.1. EUT – External View Model GW100 FCC ID: 2BRY3-GW100 Appendix- GW100-Photos Page 6 of 13 Appendix- GW100-Photos Page 7 of 13 Appendix- GW100-Photos Page 8 of 13 Appendix- GW100-Photos Page 9 of 13

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above(45) or Incinerate. Manufacturer: Huizhou Huiyang Shunxuan Technology Co., Ltd. Address: No. 397, Qiubao Road, Xintang Village, Qiuchang Street, Huiyang District, Huizhou City, China Name: Wireless Power Bank Model No.: GW100 Battery Type: Lithium Polymer Material: ABS+PC Battery Capacity: 10000mAh,38.5Wh Rated Capacity: 6000mAh Energy Conversion: ≥60% USB-C1 Port Input: 5VDC, 3A / 9VDC, 2A/ 12VDC,1.5A USB-C1 Port Output: 5VDC, 3A / 9VDC, 2.22A / 12VDC,1.67A USB-C2 OutPut: 5VDC, 3A / 9VDC, 2A/ 12VDC,1.5A USB-C Wire Input: 5VDC, 3A / 9VDC, 2A/ 12VDC,1.5A Total output: 5VDC, 3A(15W Max) USB-C Wire Output: 5VDC, 3A / 9VDC, 2.22A / 12VDC,1.67A Watch Wireless Charging Output: 5W Phone Wireless Charging Output: 15W Max FCC ID: 2BRY3-GW100 Follow Manufacturer’s Instructions. ATTENTION : Risque d'incendie et de brûlures. Ne pas ouvrir, écraser, chauer au-dessus de (45) ou incinérer. Suivre les instructions du fabricant. Cet appareil, ses piles et cordons se recyclent À DÉPOSER EN MAGASIN À DÉPOSER EN DÉCHÈTERIE Points de collecte sur www.quefairedemesdechets.fr Privilégiez la réparation ou le don de votre appareil ! Made in China

Appendix- GW100-Photos Page 10 of 14 2.2. EUT – Internal View Model GW100 FCC ID: 2BRY3-GW100 Appendix- GW100-Photos Page 11 of 14 ANT Appendix- GW100-Photos Page 12 of 14 Appendix- GW100-Photos Page 13 of 14 Appendix- GW100-Photos Page 14 of 14 ======End====== ANT

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 14 TEST REPORT Reference No. .................... : WTD25D08228027W002 FCC ID ................................ : 2BRY3-GW100 Applicant ............................ : Huizhou Huiyang Shunxuan Technology Co., Ltd. Address .............................. : No. 397, Qiubao Road, Xintang Village, Qiuchang Street, Huiyang District, Huizhou, Guan gDong, China Manufacturer .................... : Huizhou Huiyang Shunxuan Technology Co., Ltd. Address .............................. : No. 397, Qiubao Road, Xintang Village, Qiuchang Street, Huiyang District, Huizhou, Guan gDong, China Product ............................... : Wireless Power Bank Model(s). ............................ : GW100, GW50A, GW70T, GW88E, GW96F Standards........................... : FCC 47CFR Part 1.1307 Date of Receipt Sample .... : 2025-08-27 Date of Test ....................... : 2025-09-02 to 2025-11-14 Date of Issue ...................... : 2025-11-18 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the si gnatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Project Engineer Deval Qin / Designated Reviewer Reference No.: WTD25D08228027W002 Page 2 of 14 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 3 4 GENERAL INFORMATION ....................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF E.U.T ................................................................................................... 4 4.2 DETAILS OF ACCESSORIES ............................................................................................................... 4 4.3 TEST FACILITY ................................................................................................................................ 5 4.4 SUBCONTRACTED ........................................................................................................................... 5 4.5 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................ 5 4.6 TEST MODE .................................................................................................................................... 6 5 TEST SUMMARY ...................................................................................................................................... 7 6 EQUIPMENT USED DURING TEST ......................................................................................................... 8 6.1 EQUIPMENTS LIST ........................................................................................................................... 8 6.2 DESCRIPTION OF AUXILIARY EQUIPMENT .......................................................................................... 8 6.3 TEST EQUIPMENT CALIBRATION ....................................................................................................... 8 7 RF EXPOSURE ......................................................................................................................................... 9 7.1 EUT OPERATION ............................................................................................................................ 9 7.2 TEST SETUP ................................................................................................................................... 9 7.3 FIELD STRENGTH MEASUREMENTS ................................................................................................ 10 7.4 MATHEMATICAL MODEL .................................................................................................................. 10 7.5 FCC RULES.................................................................................................................................. 11 7.6 TEST RESULT ............................................................................................................................... 12 8 PHOTOGRAPHS OF TEST SETUP ....................................................................................................... 14 Reference No.: WTD25D08228027W002 Page 3 of 14 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 3 Revision History Test Report No. Date of Receipt Sample Date of Test Date of Issue Purpose CommentApproved WTD25D08228027W002 2025-08-27 2025-09-02 to 2025-11-14 2025-11-18 Original - Valid Reference No.: WTD25D08228027W002 Page 4 of 14 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4 General Information 4.1 General Description of E.U.T Product: Wireless Power Bank Model(s): GW100, GW50A, GW70T, GW88E, GW96F Model Description: Only the model name is different. Model GW100 was tested in this report. Test Sample No.: 1-1/1 Type of Modulation: ASK Frequency Range: Phone Wireless: 128-142 kHz Watch Wireless: 321-335kHz Antenna installation: Inductive loop coil Antenna Hardware Version: ZL-004S-V1.0 Software Version: ZL-004S-V1.0 4.2 Details of accessories Ratings: Battery Capacity: 10000mAh Rated capacity: 6000mAh USB-C1 Port Input: 5VDC, 3A…

Text truncated - open the document above for the full version.

FinePage 1 of 3 SPECIFICATION FOR APPROVAL CUSTOMER: CUST P/N: FINE P/N: G43.5-6.5uH Single coil 0.08*70P*10TS DESC: Φ 43.5MMX5.0MMX0.5MM DATE: 2023/08/18 Version: A.0 PREPARED BY CHECKED BYAPPROVED BYCUSTOMER APPROVE 黄燕铭宁元安黄锦华 Shenzhen Songdao Technology Co., Ltd. Factory Address: No. 123, Junfa Third Road, Dongkeng Town, Dongguan City. Building 2, Third-Class High-tech Industrial Park, 8th Floor. TEL：13728755750 FAX：0755-84526500 E-mail：[email protected] FinePage 2 of 3 SPECIFICATION DESC Φ 43.5MMX5.0MMX0.5MM Rev：A.0 CUST: XXX CUST P/N: 1.DIMENSION:(mm) 2.SCHEMATIC DIAGRAM: A 43.5.0±0.5 B 38.5.5±0.5 C 20.5±0.5 D 35±2 E 3±2 F 0.5±0.1 H 1.3±0.2 1. The coil is attached with circular hard magnetic sheet strips, with adhesive on the back. The size of the magnetic sheet is 43.5 ± 0.5 mm, the inner hole is 5.3 mm, and the thickness is 0.5 ± 0.1 mm. 3.Winding Specification: NO. TERMINAL WIRE Turns Winding Direction 1SF Silk-covered wire 0.08*70P 10TsCCW 4.ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% NO. ITEM TERMINAL SPECIFICATION TEST FREQUENCY TEST EQUIPMENTS 1IND.S-F3.8uH ±10% Single coil 100KHz/1.0V LCZ METER 1062B 2IND.S-F 6.5uH ±10% Add magnetic chips 100KHz/1.0VLCZ METER 1062B 3DCRS-F ≤60mΩ 100KHz/1.0VLCZ METER 502B 4Q值S-F ≥48 100KHz/1.0VLCZ METER 502B 5. Product Specifications Working temperature -20°C —+105°C FinePage 3 of 3 Storage temperature -20°C —+70°C Working current MAX 3A PREPARED BY/DATECHECKED BY/DATE 黄燕铭2023/08/18黄锦华202308/18

惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD SPECIFICATIONSSHEET CUSTOMER: 客户 DESCRIPTION: 品名描述 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 DATEOFAPPLICATION: 提出日期 金天下 2025-9-18 CLASSIFICATIONOFSPEC.PRESENTATION.(Ticktherelevantbox"√") oNewapplication新规格 √Newpartisaddedtoacceptedspecification新产品规格追加记录 oRevisionofacceptedspecification既存规格图面变更 ACCEPTANCESTAMP() APPROVALBY 承认 CHECKBY 审查 PREPAREBY 制作 ADDRESS:3rdFloor,No.181,Mingyue2ndRoad,ShiwanTown,BoluoCounty,Huizhoucity TELPHONE:0752-6668681 E-MAIL:[email protected] 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD HistoryForRevisedSpecification CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 Item 项次 DESCRIPTION(ContentOrReasonForChanged) 变更内容 Rev. 版本 CustRev. 客户版本 Date 日期 Revisor 修订者 1 InitialRelease(初版发行) A0 2025-9-18 冯欣 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 晁子奇 冯欣 2025-9-18 1of3 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 1.DIMENSIONS():(Unit:mm) 单位（Unit）：毫米（mm） ABCDEFGH 24.5±0.523.5±0.514.5±0.57.5±0.22±1 2.7ma 70±2 x 2.2±0.1 1.背胶为白色背胶，φ18.0。 2.磁铁规格：φ7.5*2.2，磁场3400GS。 3. 带两根77mm左右φ0.8热缩套管。 4.手表为苹果手表软磁W142。 APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2025-9-18 2of3 惠州启泰电子科技有限公司 HuizhouQitaiElectronicTechnologyCo.,LTD Specification 规格内容 CUSTOMERP/N: 客户品名 PARTNUMBER: 制造商料号 2.WINDINGDETAILS(绕线详细说明) Coil1 圈数 Turns 线径 WireDia 绕线方式疏/密 Wdg.Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 13TS 0.08*24P热风绞线(HotAir strandedWire) 密绕（Close） 逆绕 是（Yes） 3.电气特性（ELECTRICALCHARACTERISTICS）: 温度TEMPERATURE:25±10,RELATIVEHUMIDITY:6510% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS Coil1 1.INDS-F 7.8uh±0.3uh 100kHz/VUC2906A 2. QS-F 20Min 100kHz/VUC2906A 3.DCRS-F 160Max 100kHz/VUC2906A APPROVEDBY 承认 CHECKEDBY 审查 PREPAREDBY 制作 DATE 日期 PAGE 页码 2025-9-18 3of3

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 31 TEST REPORT Reference No. .................... : WTD25D08228027W001 FCC ID ................................ : 2BRY3-GW100 Applicant ............................ : Huizhou Huiyang Shunxuan Technology Co., Ltd. Address .............................. : No. 397, Qiubao Road, Xintang Village, Qiuchang Street, Huiyang District, Huizhou, GuangDong, China Manufacturer .................... : Huizhou Huiyang Shunxuan Technology Co., Ltd. Address .............................. : No. 397, Qiubao Road, Xintang Village, Qiuchang Street, Huiyang District, Huizhou, GuangDong, China Product ............................... : Wireless Power Bank Model(s). ............................ : GW100, GW50A, GW70T, GW88E, GW96F Standards........................... : FCC CFR47 Part 15C Date of Receipt Sample .... : 2025-08-27 Date of Test ....................... : 2025-09-02 to 2025-11-14 Date of Issue ...................... : 2025-11-18 Test Result ......................... : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Frank Yin / Pro ject Engineer Deval Qin / Designated Reviewer Reference No.: WTD25D08228027W001 Page 2 of 31 Waltek Testing Group Co., Ltd. http://www.w altek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 2 3 REVISION HISTORY ................................................................................................................................. 3 4 GENERAL INFORMATION ....................................................................................................................... 4 4.1 GENERAL DESCRIPTION OF E.U.T ................................................................................................... 4 4.2 DETAILS OF ACCESSORIES ............................................................................................................... 4 4.3 TEST MODE .................................................................................................................................... 5 4.4 TEST FACILITY ................................................................................................................................ 5 5 TEST SUMMARY ...................................................................................................................................... 6 6 EQUIPMENT USED DURING TEST ......................................................................................................... 7 6.1 EQUIPMENTS LIST ........................................................................................................................... 7 6.2 DESCRIPTION OF SUPPORT UNITS ................................................................................................... 8 6.3 MEASUREMENT UNCERTAINTY ......................................................................................................... 8 6.4 TEST EQUIPMENT CALIBRATION ....................................................................................................... 8 7 CONDUCTED EMISSION ......................................................................................................................... 9 7.1 EUT OPERATION ............................................................................................................................ 9 7.2 EUT SETUP .................................................................................................................................... 9 7.3 MEASUREMENT DESCRIPTION .......................................................................................................... 9 7.4 CONDUCTED EMISSION TEST RESULT ............................................................................................ 10 8 RADIATED SPURIOUS EMISSIONS ..................................................................................................... 12 8.1 EUT OPERATION .......................................................................................................................... 12 8.2 TEST SETUP ................................................................................................................................. 13 8.3 SPECTRUM ANALYZER SETUP ........................................................................................................ 14 8.4 TEST PROCEDURE ........................................................................................................................ 14 8.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ......................................................................... 14 8.6 SUMMARY OF TEST RESULTS ........................................................................................................ 15 9 BANDWIDTH MEASUREMENT ............................................................................................................. 29 9.1 TEST PROCEDURE ........................................................................................................................ 29 9.2 TEST RESULT ............................................................................................................................... 29 10 ANTENNA REQUIREMENT ................................................................................................................... 31 11 RF EX…

Text truncated - open the document above for the full version.

Appendix- GW100-Photos Page 1 of 13 1. Test Setup photos Model GW100 FCC ID: 2BRY3-GW100 1.1 Photograph – Conducted Emission For Conducted Emission Test Site 1# 1.2 Photograph – Radiated Emissions For 9kHz-30MHz Test Site 2# Phone-15W Appendix- GW100-Photos Page 2 of 13 Watch-5W For 30MHz-1000MHz Test Site 2# Appendix- GW100-Photos Page 3 of 13 1.3 Photograph – RF Exposure Appendix- GW100-Photos Page 4 of 13