2BS7R-MA5Monitor

(HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD) (Dec8.2025) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2BS7R-MA5) [HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD](“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibited fromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,theequipmentdoes notutilizecyber-securityoranti-virussoftwarefromKasperskyLab,Inc,oranyofits successorsandassignees,whichisalsoonthe“coveredlist”. Sincerely, (Applicantsignature): (Applicantprintedname):ZhenhuaZhan (HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD) (Dec8.2025) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(FCCID:2BS7R-MA5) [HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD](“theapplicant”)certifiesthat,as ofthedateofthefilingoftheapplication,theapplicantisnotidentifiedontheCovered Listasanentityproducing“covered”equipment. Sincerely, (Applicantsignature): (Applicantprintedname):ZhenhuaZhan

AttestationStatements (December2,2025) TO:FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046,USA RE:AttestationStatementsPart2.911(d)(7)requestfor(FCCID:2BS7R-MA5) (HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD),theundersigned, herebyauthorizeXINNAISIINCtoactasourdesignatedU.S.agentforserviceofprocess, ( HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD )acceptstomaintain anagentfornolessthanoneyearafterthegranteehasterminatedallmarketingand importationortheconclusionofanyCommission-relatedproceedinginvolvingthe equipment. LuckyCowboyGlobalServices, XINNAISIINCacceptstheresponsibilitytoactas designatedU.S.agentforserviceofprocess. ApplicantInformation：HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD CompanyName:ZhenhuaZhan ContactName:ZhenhuaZhan Address:No.1YucaiNorthFourthRoad,ShuikouStreetOffice,HuichengDistrict, HuizhouCity FRN:0037658424 TelephoneNo:15099920203 Email:[email protected] Signature [ZhenhuaZhan] U.S.AgentInformation: CompanyName:XINNAISIINC Address:1500NGRANTSTSTER,DENVER,CO80203 FRN:0037518289 ContactName:KiKi TelephoneNo:+01(951)893-3011 Email:[email protected] Signature [KiKi]

HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD (2025-12-02) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUESTFOR(Monitor/MA5# FCCID:2BS7R-MA5#) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe SchematicDiagram BlockDiagram OperationalDescription Requiredtobesubmittedwiththisapplicationbepermanentlywithheldfrompublic review. Abovementioneddocumentcontainsdetailedsystemandequipmentdescriptionare consideredasproprietaryinformationinoperationoftheequipment.Thepublic disclosureofabovedocumentsmightbeharmfultoourcompanyandwouldgive competitoranunfairadvantageinthemarket. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondentduringcertificationreviewprocesscannotbegrantedasconfidential documentsandthoseinformationwillbeavailableforpublicreviewoncethegrantof equipmentauthorizationisissued. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, Signature ZhenhuaZhan/Manager Date/City:Suzhou Phone:18122050760 Fax:18122050760 E-mail:[email protected]

HuizhouHuachengRoadTechnologyCo.,Ltd (2025-12-08) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorize (ShenzhenHongBiaoCertification&TestingCo.,Ltd Room102,201,Building2,YuanwangguRFIDIndustrialPark,TongguanRoad,Tianliao Community,YutangStreet,GuangmingDistrict,Shenzhen,China LeoSu [email protected]) toactonourbehalfinallmattersrelatingtoapplicationforequipmentauthorization,including thesigningofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, ZhenhuaZhan/Manager Date/City:2025-12-08/Ningbo Phone:15099920203 Fax:15099920203 E-mail:[email protected]

HUIZHOUHUACHENGROADTECHNOLOGYCO.,LTD (2025-12-02) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:ShortTermConfidentialityRequestFor(Monitor/MA5# FCCID:2BS7R-MA5#) ToWhomItMayConcern: Inaccordancewithsections0.457and0.459ofCFR47,<HUIZHOUHUACHENG ROADTECHNOLOGYCO.,LTD>.requestsshort-termConfidentialityoffollowing sectionsofthisapplicationforaperiodof45daysaftergrantisissued. Testsetupphotos Internalphotos User’smanual Thesedocumentscontaindetailedsystemandequipmentdescriptionsandrelated informationabouttheproduct,which<HUIZHOUHUACHENGROAD TECHNOLOGYCO.,LTD>considerstobeproprietary,confidential,andacustom designandotherwise,wouldnotreleasetothegeneralpublic.Sincethisdesignisabasis fromwhichfuturetechnologicalproductswillevolve,<HUIZHOUHUACHENG ROADTECHNOLOGYCO.,LTD>feelsthatthisinformationwouldbeofbenefitto itscompetitors,andthatthedisclosureoftheinformationinthesedocumentswouldgive ourcompetitorsanunfairadvantageinthemarket. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, ZhenhuaZhan/Manager Date/City:2025-11-21/GuangDong,HuiZhuo Phone:15099920203 Fax:15099920203 E-mail:[email protected]

FCCID:2BSCN-MA5 FCCID:2BSCN-MA5 FCCID:2BSCN-MA5

FCCID:2BSCN-MA5 FCCLabelSample FCCLabelSpecifications TextisBlackincolorandisjustified.Labelsareprintedinindelibleinkonpermanent adhesivebackingorsilk-screenedontotheEUTorshallbeaffixedataconspicuouslocation ontheEUT.WheretheEUTisconstructedintwoormoresectionsconnectedbywiresand marketedtogether,theabovestatementisrequiredtobeaffixedonlytothemaincontrol unit.WhentheEUTissosmallorforsuchusethatitisnotpracticabletoplacethestatement onit,theaboveinformationshallbeplacedinaprominentlocationintheinstructionmanual orpamphletsuppliedtotheuseror,alternatively,shallbeplacedonthecontainerinwhich thedeviceismarketed. FCCLabelLocation Size:10mm*8mm FCCID:2BS7R-MA5 LabelLocation

FCCID:2BS7R-MA5 RFExposureEvaluation Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhuman exposuretoradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm2) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f2)6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f2)30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r2) Where Pd=powerdensityinmW/cm2,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm2.Ifweknowthemaximumgainoftheantennaandthetotalpower inputtotheantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitis reached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleand highestchannelindividually. TestResultofRFExposureEvaluation BLE Mode Outputpower toantenna (dBm) Outputpower toantenna (mW) PowerDensityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result GFSK3.152.0650.00051.0PASS 2.4GWi-Fi Mode Outputpower toantenna (dBm) Outputpower toantenna (mW) PowerDensity atR=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b8.657.3280.00231.0PASS Remark:2.4Gantennagain=2.95dBi Thedevicecantransmitwith2.4GWI-FIandBTsimultaneously. Calculationsforsimultaneouslytransmit ModeRatiosResultLimitResult BLE0.0005 0.00281PASS 2.4GWi-Fi0.0023 Ratios=PowerDensity/PowerdensityLimit SoaSARtestisnotrequired

承 認 書 SPECIFICATION FOR APPROVAL 客戶名稱 CUSTOMER ： 客戶料號 CUSTOMER’S P/N ： 料號 PART NUMBER ： WAN097030JD251SN03 規格 DESCRIPTION ： Chip Antenna 7030 M-Ant 2.45G +5G Type 03 版本 VERSION ： V1.0 日期 ISSUE DATE ： 2023/12/7 客 戶 承 認 CUSTOMER APPROVED 工 程 部 R&D CENTER 承 認 APPROVAL 確 認 CHECKED 製 作 DRAWN Ray Snow Jerry 萬誠科技股份有限公司 OneWave Electronic Co., Ltd. 112台北市北投區立功街151號1樓 1F, No. 151, Li Gong Street, Beitou District, Taipei City 112, Taiwan 電話: (02) 2898-2220 TEL: +886 2 2898-2220 傳真: (02) 2898-5055 FAX: +886 2 2898-5055 2/12 ONEWAVE TECHNOLOGY CO., LTD. 7030 Chip antenna For WLAN Dual-Band Applications Dimension (mm) L 7.00 ± 0.20 W 3.00 ± 0.20 T 1.15 ± 0.20 P/N: WAN097030JD251SN03 3/12 ONEWAVE TECHNOLOGY CO., LTD. Part Number Information WAN 09 7030 J D25 1S N 03 A G B C D H E F A Product Series Antenna B Dimension L x W 7.0X3.0mm (+-0.2mm) C Material High K material D Working Frequency 2.4 ~ 2.5GHz + 5.15~5.85GHz E Feeding mode Monopole & Single Feeding F Antenna type Type = 03 G、H Internal Code 1. Electrical Specification Remark : Bandwidth & Peak Gain was measured under evaluation board of next page Specification Part Number WAN097030JD251SN03 Central Frequency 2450 / 5500 MHz Bandwidth 100 / 800 (Min.) MHz Return Loss -10 (Max) dB Peak Gain 2.95 / 5.40 dBi Impedance 50 Ohm Operating Temperature -40～+110 °C Maximum Power 4 W Resistance to Soldering Heats 10 ( @ 260°C) sec. Polarization Linear Azimuth Beamwidth Omni-directional Termination Cu / Sn (Leadless) 4/12 ONEWAVE TECHNOLOGY CO., LTD. 2. Recommended PCB Pattern Evaluation Board Dimension Unit : mm Suggested Matching Circuit 重要資訊 : 匹配元件建議使用精準度高的電感±0.1~0.3nH、電容±0.1pF 5/12 ONEWAVE TECHNOLOGY CO., LTD. ◆ Layout Dimensions in Clearance area( Size=27.0*7.0mm) 50 ohm transmission Line FootPrint (Unit : mm) Matching circuit 6/12 ONEWAVE TECHNOLOGY CO., LTD. 3. Measurement Results Return Loss 7/12 ONEWAVE TECHNOLOGY CO., LTD. Radiation Pattern Efficiency Peak Gain Directivity 2400MHz 70.69 % 2.83 dBi 4.33 dBi 2450MHz 72.86 % 2.95 dBi 4.32 dBi 2500MHz 71.46 % 2.89 dBi 4.34 dBi Efficiency Peak Gain Directivity 5150MHz 75.83 % 5.28 dBi 6.48 dBi 5500MHz 78.80 % 5.40 dBi 6.43 dBi 5850MHz 76.44 % 5.34 dBi 6.50 dBi X Z Y X Z Y 8/12 ONEWAVE TECHNOLOGY CO., LTD. Chamber Coordinate System 9/12 ONEWAVE TECHNOLOGY CO., LTD. 4.Reliability and Test Condictions ITEM REQUIREMENTS TEST CONDITION Solderability 1. Wetting shall exceed 90% coverage 2. No visible mechanical damage Pre-heating temperature:150°C/60sec. Solder temperature:230±5°C Duration:4±1sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Solder heat Resistance 1. No visible mechanical damage 2. Central Freq. change :within ± 6% 10 ± 0.5 sec. 60 sec . . T E M P ( °C ) 150 °C 2 6 0 °C Pre-heating temperature:150°C/60sec. Solder temperature:260±5°C Duration:10±0.5sec. Solder:Sn-Ag3.0-Cu0.5 Flux for lead free: rosin Component Adhesion (Push test) 1. No visible mechanical damage The device should be reflow soldered(230±5°C for 10sec.) to a tinned copper substrate A dynometer force gauge should be applied the side of the component. The device must with-ST-F 0.5 Kg without failure of the termination attached to component. Component Adhesion (Pull test) 1. No visible mechanical damage Insert 10cm wire into the remaining open eye bend ,the ends of even wire lengths upward and wind together. Terminal shall not be remarkably damaged. Thermal shock 1. No visible mechanical damage 2. Central Freq. change :within ±6% Phase Temperature(°C) Time(min) 1 +110±5°C 30±3 2 Room Temperature Within 3sec 3 -40±2°C 30±3 4 Room Temperature Within 3sec +110°C=>30±3min -40°C=>30±3min Test cycle:10 cycles The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to High Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: +110±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Resistance to Low Temperature 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature:-40±5°C Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. Humidity 1. No visible mechanical damage 2. Central Freq. change :within ±6% 3. No disconnection or short circuit. Temperature: 40±2°C Humidity: 90% to 95% RH Duration: 1000±12hrs The chip shall be stabilized at normal condition for 2~3 hours before measuring. 4±1 sec. 60sec TEMP (°C) 150°C 230°C 10/12 ONEWAVE TECHNOLOGY CO., LTD. 5.Soldering and Mounting Mildly activated rosin fluxes are preferred. The minimum amount of solder can lead to damage from the stresses caused by the difference in coefficients of expansion between solder, chip and substrate. The terminations are suitable for all wave and re-flow soldering systems. If hand soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools. Recommended temperature profiles for re-flow soldering in Figure 1. Products attachment with a soldering iron is discouraged due to the inherent process control limitations. In the event that a soldering iron must be employed the following precautions are recommended. ‧Preheat circuit and products to 150°C ‧Never contact the ceramic with the iron tip ‧Use a 20 watt soldering iron with tip diameter of 1.0mm ‧280°C tip temperature (max) ‧1.0mm tip diameter (max) ‧Limit soldering time to 3 sec. SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) 60~120 s 10s max. 30~60s 250~260 230 180 150 TIME(sec.) Reflow Soldering SOLDERING COOLING NATURAL PRE-HEATING TEMPERATURE(°C) within 3s Gradual cooling 150 TIME(sec.) Iron Soldering Over 60s 350 300 11/12 ONEWAVE TECHNOLOGY CO., LTD. 6.Packaging Information ◆ Tape Specification: Reel Specification: (7’’, Φ180 mm) Tape Width(mm) A(mm) B(mm) C(mm) D(mm) Chip/Reel(pcs) 16 16±1.0 60±2 13.5±0.5 178±2 2000 12/12 ONEWAVE TECHNOLOGY CO., LTD. 7.Storage and Transportation Informa…

Text truncated - open the document above for the full version.

-Page 1 of 45 -ReportNo.:HB20250929052E-01 Add:Room102,201,Building2,YuanwangguRFIDIndustrialPark,TongguanRoad,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen,China Tel:(86-755)29989321Fax:(86-755)29985110Web:www.sz-hongbiao.com TestReport Product: Monitor TradeMark: N/A ModelNumber: MA5 FCCID: 2BS7R-MA5 Preparedfor HuizhouHuachengRoadTechnologyCo.,Ltd No.1YucaiNorthFourthRoad,ShuikouStreetOffice,HuichengDistrict, HuizhouCity Preparedby ShenzhenHongBiaoCertification&TestingCo.,Ltd Room102,201,Building2,YuanwangguRFIDIndustrialPark,Tongguan Road,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen, China Tel.:+86-755-29989321Fax.:+86-755-29985110 Website:http://www.sz-hongbiao.com -Page 2 of 45 -ReportNo.:HB20250929052E-01 Add:Room102,201,Building2,YuanwangguRFIDIndustrialPark,TongguanRoad,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen,China Tel:(86-755)29989321Fax:(86-755)29985110Web:www.sz-hongbiao.com TableofContents 1GENERALDESCRIPTION........................................................................................................................................6 1.1DESCRIPTIONOFEUT.................................................................................................................................................6 1.2TESTMODE...............................................................................................................................................................6 1.3OPERATIONCHANNELLIST...........................................................................................................................................7 1.4TESTSETUP...............................................................................................................................................................7 1.5POWERSETTINGCONFIGURATIONPARAMETERS................................................................................................................7 1.6ANCILLARYEQUIPMENT...............................................................................................................................................7 2SUMMARYOFTESTRESULT..................................................................................................................................8 3TESTFACILITIESANDACCREDITATIONS................................................................................................................9 3.1TESTLABORATORY......................................................................................................................................................9 3.2ENVIRONMENTALCONDITIONS......................................................................................................................................9 3.3MEASUREMENTUNCERTAINTY......................................................................................................................................9 3.4TESTSOFTWARE.......................................................................................................................................................10 4LISTOFTESTEQUIPMENT...................................................................................................................................11 5TESTITEMANDRESULTS....................................................................................................................................13 5.1ANTENNAREQUIREMENT...........................................................................................................................................13 5.1.1StandardRequirement..............................................................................................................................13 5.1.2TestResult..................................................................................................................................................13 5.2CONDUCTEDEMISSION..............................................................................................................................................14 5.2.1Limits..........................................................................................................................................................14 5.2.2TestProcedures..........................................................................................................................................14 5.2.3TestSetup...................................................................................................................................................15 5.2.4TestResult..................................................................................................................................................15 5.3RADIATEDEMISSION.................................................................................................................................................18 5.3.1Limits..........................................................................................................................................................18 5.3.2TestProcedures..........................................................................................................................................18 5.3.3TestSetup...................................................................................................................................................18 5.3.4TestResult..................................................................................................................................................19 5.3.5BandEdge-Radiated................................................................................................................................23 5.3.6Spuriousemissioninrestrictedband1000MHz-25000MHz....................................................................24 5.4PEAKOUTPUTPOWER..............................................................................................................................................25 5.4.1Limit..................................................…

Text truncated - open the document above for the full version.

-Page 1 of 51 -ReportNo.:HB20250929052E-02 Add:Room102,201,Building2,YuanwangguRFIDIndustrialPark,TongguanRoad,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen,China Tel:(86-755)29989321Fax:(86-755)29985110Web:www.sz-hongbiao.com TestReport Product: Monitor TradeMark: N/A ModelNumber: MA5 FCCID: 2BS7R-MA5 Preparedfor HuizhouHuachengRoadTechnologyCo.,Ltd No.1YucaiNorthFourthRoad,ShuikouStreetOffice,HuichengDistrict,Hui zhouCity Preparedby ShenzhenHongBiaoCertification&TestingCo.,Ltd Room102,201,Building2,YuanwangguRFIDIndustrialPark,Tongguan Road,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen, China Tel.:+86-755-29989321Fax.:+86-755-29985110 Website:http://www.sz-hongbiao.com -Page 2 of 51 -ReportNo.:HB20250929052E-02 Add:Room102,201,Building2,YuanwangguRFIDIndustrialPark,TongguanRoad,TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen,China Tel:(86-755)29989321Fax:(86-755)29985110Web:www.sz-hongbiao.com TableofContents 1GENERALDESCRIPTION........................................................................................................................................6 1.1DESCRIPTIONOFEUT.................................................................................................................................................6 1.2TESTMODE...............................................................................................................................................................6 1.3OPERATIONCHANNELLIST...........................................................................................................................................7 1.4TESTSETUP...............................................................................................................................................................8 1.5POWERSETTINGCONFIGURATIONPARAMETERS................................................................................................................8 1.6ANCILLARYEQUIPMENT...............................................................................................................................................8 2SUMMARYOFTESTRESULT..................................................................................................................................9 3TESTFACILITIESANDACCREDITATIONS..............................................................................................................10 3.1TESTLABORATORY....................................................................................................................................................10 3.2ENVIRONMENTALCONDITIONS....................................................................................................................................10 3.3MEASUREMENTUNCERTAINTY....................................................................................................................................10 3.4TESTSOFTWARE.......................................................................................................................................................11 4LISTOFTESTEQUIPMENT...................................................................................................................................12 5TESTITEMANDRESULTS....................................................................................................................................14 5.1ANTENNAREQUIREMENT...........................................................................................................................................14 5.1.1StandardRequirement..............................................................................................................................14 5.1.2TestResult..................................................................................................................................................14 5.2CONDUCTEDEMISSION..............................................................................................................................................15 5.2.1Limits..........................................................................................................................................................15 5.2.2TestProcedures..........................................................................................................................................15 5.2.3TestSetup...................................................................................................................................................16 5.2.4TestResult..................................................................................................................................................16 5.3RADIATEDEMISSION.................................................................................................................................................19 5.3.1Limits..........................................................................................................................................................19 5.3.2TestProcedures..........................................................................................................................................19 5.3.3TestSetup...................................................................................................................................................19 5.3.4TestResult..................................................................................................................................................20 5.3.5RadiatedBandEdge..................................................................................................................................25 5.3.6SpuriousEmissioninRestrictedBand1000MHz-25000MHz...................................................................27 5.4PEAKOUTPUTPOWER..............................................................................................................................................28 5.4.1Limit......................................................…

Text truncated - open the document above for the full version.