2BS9F-DC-M3PDroieCtor

Power adapter: 15V 3A Power adapter 1pcs Remote control 1pcs - USB charging cable 1.Please charge with a 15V 3A charger. Do not play music while charging. 2.When the microphone is turned on, do not point it at the speaker to Power output: 30W+30W Frequency: 80HZ 20KHz Drive unit: 4inch X 2(102mm)-2inch X 2(50.8mm) S/N: ≥75DB Projector speaker 1pcs Microphone 2pcs User Manual 1pcs 1pcs to avoid whistling sounds. 3.After the projector image is adjusted to be clear, in order not to affect the resonance of the karaoke speaker and the automatic focusing of the projector image, you can first choose to turn o ffthe automatic focusing function of the projector. Material: ABS plastic + iron mesh AUX Cable 1pcs Product parameters On the main interface, find the system function, select the Settings Center, enter to turn on Bluetooth, find the M3P Bluetooth name to enter the pairing. After the pairing is completed, the speaker will have a Bluetooth connection prompt sound, and M3P will show that it is connected. KTVspeakerprojector KTV speaker projector Bluetooth voice remote control pairing method: For the first use, please pair it in this way: 1. On the guidance interface, press the left and right buttons simultaneously and hold for 5 seconds until the indicator light flashes. You can hear a "ding" sound and the pairing is successful. 2. How can I enter the "Bluetooth" in the configuration if it's not my first use, turn on Bluetooth, and do it simultaneously Press the left and right buttons, hold down for 5 seconds until the indicator light flashes. You can hear a "ding" sound and the pairing is successful. 1. Indicator light 2. Power button 3. Speaker power button 4. Voice key 5. Signal source 6. Menu key 7. Direction key 8. Confirmation key 9. Mute key 10. Return key 11. Home page key 12. Increase the volume 13. Reduce the volume 14. Focus adjustment + 15. Focus adjustment - 16. Eliminate the source sound 17. The previous one 18. Play/Pause 19. The next one 20. Mode switching 21. Light switch 22. Decreased the volume 23. Increase the volume Speaker connection input input Speaker Instructions 1. MODE: The mode button is for mode conversion (Bluetooth, USB flash, AUX, coaxial). 2. Press " " short to make up the previous song, and press long to reduce the sound. 2. 3. Short press" "Pause or play. 4. Press " " briefly to move on to the next song, and press long to increase the sound. When you turn on the power of the speaker, Bluetooth mode is the default mode Turn on the projector and enter the system Settings. Turn on Bluetooth and search for the nearby Bluetooth name: (M3P). When inserting USB, it will switch to USB mode When a 3.5mm three-level audio cable is inserted, it will switch to AUX mode Insert the AUX, USB flash drive, coaxial, and press the MODE key to change the mode Function of the speaker remote control The green button on the remote control controls the speaker function. 1.Short press Control the speaker to turn on or off. 2.Short press Cancel the original singer's voice, and press 3.The speaker devices can be connected to the mobile phone's 4.The speaker devices can be connected to the mobile phone's briefly again to restore the original voice. Bluetooth separately or used for playback (USB flash, AUX, coaxial) audio file, short press play/pause. Bluetooth separately or used for playback (USB flash, AUX, coaxial) audio file, short press previous track. 5.The speaker devices can be connected to the mobile phone's Bluetooth separately or used for playback (USB flash, AUX, coaxial) audio file, short press next track. 6.Short press Switch mode (Bluetooth, USB flash , AUX, coaxial)Long press to switch to outdoor mode. 7.Short press to switch the light mode, long press off/on. 8.Short press or long press reduces the sound. 9.Short press or long press to increase the sound. LED File Type Photos Videos Audio Supported File Formats Purchase shop: After-sales service card Customer name： Customer phone: Customer ID: Return address： Fault description（For quick maintenance and handling, please describe the fault in detail） Before cleaning, ensure the power plug is disconnected from the socket. Do not use insecticides or other volatile chemicals on the projector or lens. Also, avoid prolonged contact of rubber or vinyl products with the projector, as this may damage or peel off the coating. 1.Cleaning the Projector Wipe with a soft, dry cotton cloth. For severe dirt, wipe with a soft cloth dampened with diluted neutral detergent, then dry with a dry cloth. If using a chemical fiber cloth, follow the precautions. Do not use thinner, benzene, or other solvents, as they may cause degradation or peeling of the coating. When cleaning dirt from ventilation holes, attach a brush to the front of the vacuum cleaner for cleaning, avoid using a vacuum cleaner without any attachments, or using a nozzle for cleaning. Do not scrape the projector body with fingernails or other hard objects to avoid scratches. 2. Lens Dirt Clean the lens in the same way as cleaning camera lenses: use a professional blower for cameras or cleaning paper for eyeglass lenses, being careful not to scratch the lens. 3. Cleaning Dust from Intake and Exhaust Ports Dust in the intake and exhaust ports can hinder ventilation, causing an increase in internal temperature and leading to malfunctions. Cleaning guidelines: Clean at least once every 10000 hours of use. Turn off the power, then disconnect the power cord. Clean the exterior with an electric vacuum cleaner, fitting a brush adapter on the vacuum cleaner. Be careful not to use a vacuum cleaner without an adapter or an adapter without a brush head. 1.This product is covered under a "Three Guarantees" warranty for one year from the date of purchase (non-human damage reasons). 2.During the warranty period, any faults caused by product technical reasons will be repaired under warranty by our company. 3.The following are not covered under warranty: ①Accessories other than the main unit…

Text truncated - open the document above for the full version.

ShenzhenBoshikeMicroelectronicsCo.,Ltd. 402HengtaiYunguCreativePark,No.77-3ShangweiNewVillage,SongyuanxiaCommunity, GuanhuStreet,LonghuaDistrict,Shenzhen FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:11-25-2025 Ref:AttestationStatementsPart2.911(d)(7)Filing FCCIDorGranteeCode:FCCID:2BS9F-DC-M3P ApplicantFRN:0037666039 ShenzhenBoshikeMicroelectronicsCo.,Ltd.(“theapplicant”)certifiesthat,asofthedateof thefilingoftheapplication,REPAmericaLLCisourdesignatedU.S.agentforserviceof processfortheabovereferencedFCCID.ShenzhenBoshikeMicroelectronicsCo.,Ltd. acceptstomaintainanagentfornolessthanoneyearafterthegranteehasterminatedall marketingandimportationortheconclusionofanyCommission-relatedproceedinginvolving theequipment. REPAmericaLLCaccepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:REPAmericaLLC U.S.AgentFRN:0034192500 Address:350TerrySt.200Longmont,CO80501UnitedStates ContactPerson:BenXU Tel.:(719)201-3314 Email:[email protected] Sincerely, ShenzhenBoshikeMicroelectronicsCo.,Ltd.REPAmericaLLC XiuxiuPeng/managerBenXU/manager (sign)(sign)

Regards, Shenzhen Boshike Microelectronics Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date:11-26-2025 SUBJECT: FCC Application fo r FCC ID:2BS9F-DC-M3P To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States.According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, (signature) Name:Xiuxiu Peng Title: manager

Rev1/26/2023 ShenzhenBoshikeMicroelectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:11-26-2025 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BS9F-DC-M3P ShenzhenBoshikeMicroelectronicsCo.,Ltd.(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. ShenzhenBoshikeMicroelectronicsCo.,Ltd.(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegratedKaspersky Lab,Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24- 886andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (signature) XiuxiuPeng/manager Rev1/26/2023 ShenzhenBoshikeMicroelectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:11-26-2025 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BS9F-DC-M3P ShenzhenBoshikeMicroelectronicsCo.,Ltd.(“theapplicant”)certifiesthat,asofthedateofthefiling oftheapplication,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityor anyofitssubsidiariesoraffiliates)asanentityproducing“covered”equipment. Sincerely, (signature) XiuxiuPeng/manager

FCC ID:2BS9F-DC-M3P Shenzhen Boshike Microelectronics Co., Ltd. Model Confirmation Letter We,Shenzhen Boshike Microelectronics Co., Ltd., certify the product :DroieCtor , Model No.: M3P, M1P, M2P, M4P, M5P, M6P, M7P, M8P, M9P, S1P, S2P, S3P, S4P, S5P, S6P, S7P, S8P, S9P, T1P, T2P, T3P, T4P, T5P, T6P, T7P, T8P, T9P, G1P, G2P, G3P, G4P, G5P, G6P, G7P, , G8P, G9P, E10P, E11P, E12P, E13P, S10P, S20P, S30P, S40P, C3P, Y30P, C6, C6P There are many models of the product, customer requirements for different models in the market, resulting in multiple models. However, the internal circuit boards, PCBs, BOMs, and other electrical structures of these models are the same, and these differences will not affect RF&EMC performance. Signiture: Company Name: Shenzhen Boshike Microelectronics Co., Ltd. Date: 2025-11-25

ShenzhenBoshikeMicroelectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:11-26-2025 ConfidentialityRequestregardingapplicationforcertificationofFCCID:2BS9F-DC-M3P PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitType BlockDiagram OperationalDescription Schematics Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrantfor thisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealsorequest temporaryconfidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitType Sincerely, (signature) Name:XiuxiuPeng Title:manager

ShenzhenBoshikeMicroelectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Date:11-26-2025 SUBJECT:FCCApplicationforFCCID:2BS9F-DC-M3P ToWhomItMayConcern: We,theundersigned,herebyauthorizeColinHuangatShenzhenDACETestingTechnology Co.,Ltd.onourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment. AnyandallactscarriedoutbyShenzhenDACETestingTechnologyCo.,Ltd.onourbehalf shallhavethesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,theapplicant, arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301oftheAnti-DrugActof 1988,21USC853a,andnopartytotheapplicationissubjecttoadenialoffederalbenefits pursuanttothatsection. Regards, Sincerely, (signature) Name:XiuxiuPeng Title:manager

FCCID:2BS9F-DC-M3P External

FCC ID: 2BS9F-DC-M3P FCC ID place SAMPLE: SIZE:40*25MM DroieCtor Model: M3P INPUT: DC15V FCC ID: 2BS9F-DC-M3P FCC WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCCID:2BS9F-DC-M3P Internal

Page1of1 RFExposureEvaluationReport 1RFEXPOSURE ProductName:DroieCtor ModelNo.:M3P,M1P,M2P,M4P,M5P,M6P,M7P,M8P,M9P,S1P,S2P,S3P, S4P,S5P,S6P,S7P,S8P,S9P,T1P,T2P,T3P,T4P,T5P,T6P, T7P,T8P,T9P,G1P,G2P,G3P,G4P,G5P,G6P,G7P,,G8P,G9P, E10P,E11P,E12P,E13P,S10P,S20P,S30P,S40P,C3P,Y30P, C6,C6P FCCID:2BS9F-DC-M3P 2.RFExposureEvaluation Applicablestandard FCCKDB447498D01GeneralRFExposureGuidancev06:MobileandPortableDevice,RFExposure, EquipmentAuthorizationProcedures. FCCCFR47part11.1310:Radiofrequencyradiationexposurelimits. FCCCFR47part22.1091:Radiofrequencyradiationexposureevaluation:mobiledevices. AccordingtoKDB447498D01GeneralRFExposureGuidancev064.3.1.StandaloneSARtest exclusionconsiderationsUnlessspecificallyrequiredbythepublishedRFexposureKDBprocedures, standalone1-gheadorbodyand10-gextremitySARevaluationforgeneralpopulationexposure conditions,bymeasurementornumericalsimulation,isnotrequiredwhenthecorrespondingSAR ExclusionThresholdcondition,listedbelow,issatisfied. 2.1LIMITS AccordingtoFCCPart1.1310:Thecriterialistedinthefollowingtableshallbeusedtoevaluatethe environmentimpactofhumanexposuretoradiofrequency(RF)radiationasspecifiedinpart1.1307(b) F=FrequencyinMHzFriisFormula Friistransmissionformula:Pd=(Pout*G)/(4*Pi*R2)Where Pd=powerdensityinmW/cm2 Page1of1 Pout=outputpowertoantennainmW G=gainofantennainlinearscale Pi=3.1416 R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE.Ifweknowthemaximumgainoftheantennaandthetotalpowerinputtotheantenna, throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestResultofRFExposureEvaluation BTANT1:4.17dBi;2.4G-WIFIANT1:1.79dBi; AntennaGain:ThemaximumGainmeasuredinfullyanechoicchamberis1.0inlinearscale. OutputPowerIntoAntenna&RFExposureEvaluationDistance: TheMaxConductedPeakOutputPowerdatarefertoreportreportNo.:DACE251010010RL001& DACE251010010RL002 Testchannel Antenna Output Power(dBm) Maximum tune-up Power (dbm) Maximum tune-up Power(dbm) Max tune-up Power (mW) Calculated value (mW/cm2) Limit (mW/cm2) 3-DH5-2480MHz1.542±13.0 1.995 0.001 1.0 802.11g -2412MHz 20.9021±122125.8930.038 1.0 802.11g -2437MHz 20.5521±122125.8930.038 1.0 802.11g -2462MHz 20.6021±122125.8930.038 1.0 Remark:Pd=(Pout*G)/(4*Pi*R 2 )=(125.893*1.510)/(4*3.1415*20*20)=0.038, G=10 gain/10 =1.510 EUTRFExposureEvaluationsimultaneoustransmissionoperations Accordingto865664D022.2d)1): ThesumoftheratiosofthespatiallyaveragedresultstotheapplicablefrequencydependentMPElimits: Simultaneoustransmission mode ThesumoftheratiosSUMLimit BT+2.4GWIFI0.001+0.0380.0391.0 Conclusion:0.039<1.0,Sothereisnosarrequirement NOTE:1.EUTismorethan20cmawayfromthehumanbody. 2.Thesumoftheratios(2.4GWIFI+BT)islessthanthelimitvalueof1.0,sothereisnosar requirement.

Shenzhen Xiangboyi Technology Co. Ltd Specification Confirmation Letter 一. Test System and Equipment 二. Product Description 三. Device Description 四. Matching Circuits 五. Active Test Tata 六. EngineeringDrawing .一Test System and Equipment 二.Product Description TechnicalrequirementsTechnicalindex Note WIFI：B/G/N/A Band 模 WIFI:2400-2500Mhz 5000-5800Mh Range Of Frequency z 2400-2500Mhz<3. VSWR 0 50 Center Frequency Impendance Ω Polarization Linear polarization -20°C/+55 operating temperature °C -25°C/+65 storage temperature °C Salt Fog 24h(24h alterning wet & dry) RoHS Compliant yes 三.Device Description EUT PHOTO ANT PHOTO 四.Matching Circuits ElementValueVender E1(0201)NA E2(0201)0Ω E3(0201)NA E4(0201)0Ω 五. Active Test Data 六.工程图EngineeringDrawing

V1.0ReportNo.:DACE251010010RL002 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 1 of 93 RFTESTREPORT For ShenzhenBoshikeMicroelectronicsCo.,Ltd. ProductName:DroieCtor TestModel(s):M3P ReportReferenceNo.:DACE251010010RL002 FCCID:2BS9F-DC-M3P Applicant’sName:ShenzhenBoshikeMicroelectronicsCo.,Ltd. Address: 402HengtaiYunguCreativePark,No.77-3ShangweiNewVillage, SongyuanxiaCommunity,GuanhuStreet,LonghuaDistrict,Shenzhen TestingLaboratory:ShenzhenDACETestingTechnologyCo.,Ltd. Address: 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark, TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen, Guangdong,China TestSpecificationStandard:47CFRPart15.247 DateofReceipt:October10,2025 DateofTest:October10,2025toOctober28,2025 DataofIssue:October28,2025 Result:Pass Note:Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenDACE TestingTechnologyCo.,Ltd.ThisdocumentmaybealteredorrevisedbyShenzhenDACETestingTechnology Co.,Ltd.personnelonly,andshallbenotedintherevisionsectionofthedocument.Thetestresultsinthe reportonlyapplytothetestedsample V1.0ReportNo.:DACE251010010RL002 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 2 of 93 Applyforcompanyinformation Applicant’sName:ShenzhenBoshikeMicroelectronicsCo.,Ltd. Address:402HengtaiYunguCreativePark,No.77-3ShangweiNewVillage, SongyuanxiaCommunity,GuanhuStreet,LonghuaDistrict,Shenzhen ProductName:DroieCtor TestModel(s):M3P SeriesModel::M1P,M2P,M4P,M5P,M6P,M7P,M8P,M9P,S1P,S2P,S3P,S4P,S5P, S6P,S7P,S8P,S9P,T1P,T2P,T3P,T4P,T5P,T6P,T7P,T8P,T9P,G1P, G2P,G3P,G4P,G5P,G6P,G7P,,G8P,G9P,E10P,E11P,E12P,E13P, S10P,S20P,S30P,S40P,C3P,Y30P,C6,C6P TestSpecificationStandard(s):47CFRPart15.247 NOTE1: Themanufacturershouldensurethatallproductsinseriesproductionareinconformitywiththeproductsampledetailedin thisreport.Iftheproductinthisreportisusedinanyconfigurationotherthanthatdetailedinthereport,themanufacturer mustensurethenewsystemcomplieswithallrelevantstandards. Compiledby:Supervisedby:Approvedby: KerenHuang/TestEngineerStoneYin/ProjectEngineerTomChen/Manager October28,2025October28,2025October28,2025 V1.0ReportNo.:DACE251010010RL002 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 3 of 93 RevisionHistoryOfReport VersionDescriptionREPORTNo.IssueDate V1.0OriginalDACE251010010RL002October28,2025 V1.0ReportNo.:DACE251010010RL002 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 4 of 93 CONTENTS 1TESTSUMMARY...................................................................................................................................................6 1.1TESTSTANDARDS........................................................................................................................................6 1.2SUMMARYOFTESTRESULT.........................................................................................................................6 2GENERALINFORMATION....................................................................................................................................7 2.1CLIENTINFORMATION..................................................................................................................................7 2.2DESCRIPTIONOFDEVICE(EUT)..................................................................................................................7 2.3DESCRIPTIONOFTESTMODES....................................................................................................................8 2.4DESCRIPTIONOFSUPPORTUNITS................................................................................................................8 2.5EQUIPMENTSUSEDDURINGTHETEST........................................................................................................9 2.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................10 2.7IDENTIFICATIONOFTESTINGLABORATORY.................................................................................................11 2.8ANNOUNCEMENT........................................................................................................................................11 3EVALUATIONRESULTS(EVALUATION)...........................................................................................................12 3.1ANTENNAREQUIREMENT............................................................................................................................12 3.1.1Conclusion:.................................................................................................................................12 4RADIOSPECTRUMMATTERTESTRESULTS(RF).........................................................................................13 4.1CONDUCTEDEMISSIONATACPOWERLINE................................................................................................13 4.1.1E.U.T.Operation:........................................................................................................................13 4.1.2TestSetupDiagram:...................................................................................................................13 4.1.3TestData:...................................................................................................................................14 4.26DBBANDWIDTH.....................................................................…

Text truncated - open the document above for the full version.

FCCID:2BS9F-DC-M3P Testsetup ConductedEmissionatACpowerline Bandedgeemissions(Radiated) Emissionsinfrequencybands(below1GHz)