2BS9F-M3PProjector speaker

Power adapter: 15V 3A Power adapter 1pcs Remote control 1pcs - USB charging cable 1.Please charge with a 15V 3A charger. Do not play music while charging. 2.When the microphone is turned on, do not point it at the speaker to Power output: 30W+30W Frequency: 80HZ 20KHz Drive unit: 4inch X 2(102mm)-2inch X 2(50.8mm) S/N: ≥75DB Projector speaker 1pcs Microphone 2pcs User Manual 1pcs 1pcs to avoid whistling sounds. 3.After the projector image is adjusted to be clear, in order not to affect the resonance of the karaoke speaker and the automatic focusing of the projector image, you can first choose to turn o ffthe automatic focusing function of the projector. Material: ABS plastic + iron mesh AUX Cable 1pcs Product parameters On the main interface, find the system function, select the Settings Center, enter to turn on Bluetooth, find the M3P Bluetooth name to enter the pairing. After the pairing is completed, the speaker will have a Bluetooth connection prompt sound, and M3P will show that it is connected. KTVspeakerprojector KTV speaker projector Bluetooth voice remote control pairing method: For the first use, please pair it in this way: 1. On the guidance interface, press the left and right buttons simultaneously and hold for 5 seconds until the indicator light flashes. You can hear a "ding" sound and the pairing is successful. 2. How can I enter the "Bluetooth" in the configuration if it's not my first use, turn on Bluetooth, and do it simultaneously Press the left and right buttons, hold down for 5 seconds until the indicator light flashes. You can hear a "ding" sound and the pairing is successful. 1. Indicator light 2. Power button 3. Speaker power button 4. Voice key 5. Signal source 6. Menu key 7. Direction key 8. Confirmation key 9. Mute key 10. Return key 11. Home page key 12. Increase the volume 13. Reduce the volume 14. Focus adjustment + 15. Focus adjustment - 16. Eliminate the source sound 17. The previous one 18. Play/Pause 19. The next one 20. Mode switching 21. Light switch 22. Decreased the volume 23. Increase the volume Speaker connection input input Speaker Instructions 1. MODE: The mode button is for mode conversion (Bluetooth, USB flash, AUX, coaxial). 2. Press " " short to make up the previous song, and press long to reduce the sound. 2. 3. Short press" "Pause or play. 4. Press " " briefly to move on to the next song, and press long to increase the sound. When you turn on the power of the speaker, Bluetooth mode is the default mode Turn on the projector and enter the system Settings. Turn on Bluetooth and search for the nearby Bluetooth name: (M3P). When inserting USB, it will switch to USB mode When a 3.5mm three-level audio cable is inserted, it will switch to AUX mode Insert the AUX, USB flash drive, coaxial, and press the MODE key to change the mode Function of the speaker remote control The green button on the remote control controls the speaker function. 1.Short press Control the speaker to turn on or off. 2.Short press Cancel the original singer's voice, and press 3.The speaker devices can be connected to the mobile phone's 4.The speaker devices can be connected to the mobile phone's briefly again to restore the original voice. Bluetooth separately or used for playback (USB flash, AUX, coaxial) audio file, short press play/pause. Bluetooth separately or used for playback (USB flash, AUX, coaxial) audio file, short press previous track. 5.The speaker devices can be connected to the mobile phone's Bluetooth separately or used for playback (USB flash, AUX, coaxial) audio file, short press next track. 6.Short press Switch mode (Bluetooth, USB flash , AUX, coaxial)Long press to switch to outdoor mode. 7.Short press to switch the light mode, long press off/on. 8.Short press or long press reduces the sound. 9.Short press or long press to increase the sound. LED File Type Photos Videos Audio Supported File Formats Purchase shop: After-sales service card Customer name： Customer phone: Customer ID: Return address： Fault description（For quick maintenance and handling, please describe the fault in detail） Before cleaning, ensure the power plug is disconnected from the socket. Do not use insecticides or other volatile chemicals on the projector or lens. Also, avoid prolonged contact of rubber or vinyl products with the projector, as this may damage or peel off the coating. 1.Cleaning the Projector Wipe with a soft, dry cotton cloth. For severe dirt, wipe with a soft cloth dampened with diluted neutral detergent, then dry with a dry cloth. If using a chemical fiber cloth, follow the precautions. Do not use thinner, benzene, or other solvents, as they may cause degradation or peeling of the coating. When cleaning dirt from ventilation holes, attach a brush to the front of the vacuum cleaner for cleaning, avoid using a vacuum cleaner without any attachments, or using a nozzle for cleaning. Do not scrape the projector body with fingernails or other hard objects to avoid scratches. 2. Lens Dirt Clean the lens in the same way as cleaning camera lenses: use a professional blower for cameras or cleaning paper for eyeglass lenses, being careful not to scratch the lens. 3. Cleaning Dust from Intake and Exhaust Ports Dust in the intake and exhaust ports can hinder ventilation, causing an increase in internal temperature and leading to malfunctions. Cleaning guidelines: Clean at least once every 10000 hours of use. Turn off the power, then disconnect the power cord. Clean the exterior with an electric vacuum cleaner, fitting a brush adapter on the vacuum cleaner. Be careful not to use a vacuum cleaner without an adapter or an adapter without a brush head. 1.This product is covered under a "Three Guarantees" warranty for one year from the date of purchase (non-human damage reasons). 2.During the warranty period, any faults caused by product technical reasons will be repaired under warranty by our company. 3.The following are not covered under warranty: ①Accessories other than the main unit…

Text truncated - open the document above for the full version.

Rev1/26/2023 ShenzhenBoshikeMicroelectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:11-26-2025 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BS9F-M3P ShenzhenBoshikeMicroelectronicsCo.,Ltd.(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. ShenzhenBoshikeMicroelectronicsCo.,Ltd.(“theapplicant”)certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegratedKaspersky Lab,Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24- 886andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (signature) XiuxiuPeng/manager Rev1/26/2023 ShenzhenBoshikeMicroelectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:11-26-2025 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BS9F-M3P ShenzhenBoshikeMicroelectronicsCo.,Ltd.(“theapplicant”)certifiesthat,asofthedateofthefiling oftheapplication,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityor anyofitssubsidiariesoraffiliates)asanentityproducing“covered”equipment. Sincerely, (signature) XiuxiuPeng/manager

ShenzhenBoshikeMicroelectronicsCo.,Ltd. 402HengtaiYunguCreativePark,No.77-3ShangweiNewVillage,SongyuanxiaCommunity, GuanhuStreet,LonghuaDistrict,Shenzhen FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:11-25-2025 Ref:AttestationStatementsPart2.911(d)(7)Filing FCCIDorGranteeCode:FCCID:2BS9F-M3P ApplicantFRN:0037666039 ShenzhenBoshikeMicroelectronicsCo.,Ltd.(“theapplicant”)certifiesthat,asofthedateof thefilingoftheapplication,REPAmericaLLCisourdesignatedU.S.agentforserviceof processfortheabovereferencedFCCID.ShenzhenBoshikeMicroelectronicsCo.,Ltd. acceptstomaintainanagentfornolessthanoneyearafterthegranteehasterminatedall marketingandimportationortheconclusionofanyCommission-relatedproceedinginvolving theequipment. REPAmericaLLCaccepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:REPAmericaLLC U.S.AgentFRN:0034192500 Address:350TerrySt.200Longmont,CO80501UnitedStates ContactPerson:BenXU Tel.:(719)201-3314 Email:[email protected] Sincerely, ShenzhenBoshikeMicroelectronicsCo.,Ltd.REPAmericaLLC XiuxiuPeng/managerBenXU/manager (sign)(sign)

Regards, Shenzhen Boshike Microelectronics Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Date: 11-2 6-2025 SUBJECT: FCC Application for FCC ID: 2BS9F-M3P To Whom It May Concern: I, the undersigned, hereby states this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules, and will apply the Supplier's Declaration of Conformity procedure to the class B computer peripheral portion of this composite device. I understand the following FCC requirements: 1. Devices subject to the SDoC procedure are required to be tested to show compliance with the FCC technical regulations by a recognized accredited testing laboratory. The testing laboratory must be accredited by a Commission approved accreditation body or designated under the terms of a government-to-government Mutual Recognition Agreement (MRA). A listing of those accredited testing laboratories that have been recognized by the Commission is published on the FCC Webpage: https://apps.fcc.gov/oetcf/eas/reports/TestFirmSearch.cfm (Select the "accredited" option to search for FCC recognized accredited test firms.) 2. Pt 2.1077 contains the list of information that must be included in the Supplier's Declaration of Conformity, which must be supplied with each product sold. The SDoC compliance info shall be included in the User’s Manual or as a separate sheet. The info must contain the name, address, and phone number of the responsible party, which must be located within the United States.According to 2.909(b), the responsible party is either the Manufacturer or if the product is imported the Importer. Sincerely, (signature) Name:Xiuxiu Peng Title: manager

ShenzhenBoshikeMicroelectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:11-26-2025 ConfidentialityRequestregardingapplicationforcertificationofFCCID:2BS9F-M3P PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequestconfidential treatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitType BlockDiagram OperationalDescription Schematics Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarilyreleasedto thepublic.Thepublicdisclosureofthesematerialsmaybeharmfultotheapplicantandprovide unjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateoftheGrantfor thisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealsorequest temporaryconfidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitType Sincerely, (signature) Name:XiuxiuPeng Title:manager

ShenzhenBoshikeMicroelectronicsCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 Date:11-26-2025 SUBJECT:FCCApplicationforFCCID:2BS9F-M3P ToWhomItMayConcern: We,theundersigned,herebyauthorizeColinHuangatShenzhenDACETestingTechnology Co.,Ltd.onourbehalf,toapplytotheFederalCommunicationsCommissiononourequipment. AnyandallactscarriedoutbyShenzhenDACETestingTechnologyCo.,Ltd.onourbehalf shallhavethesameeffectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We,theapplicant, arenotsubjecttoadenialoffederalbenefitspursuanttoSection5301oftheAnti-DrugActof 1988,21USC853a,andnopartytotheapplicationissubjecttoadenialoffederalbenefits pursuanttothatsection. Regards, Sincerely, (signature) Name:XiuxiuPeng Title:manager

FCC ID: 2BS9F-M3P Signiture: Company Name: Shenzhen Boshike Microelectronics Co., Ltd. Date: Shenzhen Boshike Microelectronics Co., Ltd. Model Confirmation Letter We,Shenzhen Boshike Microelectronics Co., Ltd., certify the product :Projector speaker , Mode l No. : M3P, M1P, M2P, M4P, M5P, M6P, M7P, M8P, M9P, S1P, S2P, S3P, S4P, S5P, S6P, S7P, S8P, S9P, T1P, T2P, T3P, T4P, T5P, T6P, T7P, T8P, T9P, G1P, G2P, G3P, G4P, G5P, G6P, G7P, , G8P, G9P, E10P, E11P, E12P, E13P, S10P, S20P, S30P, S40P, C3P, Y30P, C6, C6P There are three models of the product, customer requirements for different models in the market, resulting in multiple models. However, the internal circuit boards, PCBs, BOMs, and other electrical structures of these models are the same, and these differences will not affect RF&EMC performance. 2025-11-25

FCCID:2BS9F-M3P External

FCCID:2BS9F-M3P FCCIDplace SAMPLE: SIZE:40*25MM Projector speaker Model: M3P INPUT: 100-240V 50/60Hz FCC ID: 2BS9F-M3P FCC WARNING: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCCID:2BS9F-M3P Internal

Page1of1 RFExposureEvaluationReport 1RFEXPOSURE ProductName:Projectorspeaker ModelNo.: M3P,M1P,M2P,M4P,M5P,M6P,M7P,M8P,M9P,S1P, S2P,S3P,S4P,S5P,S6P,S7P,S8P,S9P,T1P,T2P,T3P, T4P,T5P,T6P,T7P,T8P,T9P,G1P,G2P,G3P,G4P,G5P, G6P,G7P,,G8P,G9P,E10P,E11P,E12P,E13P,S10P, S20P,S30P,S40P,C3P,Y30P,C6,C6P FCCID:2BS9F-M3P 2.RFExposureEvaluation FCCKDB447498D01GeneralRFExposureGuidancev06:MobileandPortableDevice,RF Exposure,EquipmentAuthorizationProcedures. FCCCFR47part11.1310:Radiofrequencyradiationexposurelimits. FCCCFR47part22.1093Radiofrequencyradiationexposureevaluation:portabledevices. 2.1LIMITS The1-gand10-gSARtestexclusionthresholdsfor100MHzto6GHzattestseparation distances≤50mmaredeterminedby: [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]*[√f(GHz)]≤3.0for1-gSARand≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz  PoweranddistanceareroundedtothenearestmWandmmbeforecalculation  Theresultisroundedtoonedecimalplaceforcomparison Thetestexclusionsareapplicableonlywhentheminimumtestseparationdistanceis≤50 mmandfortransmissionfrequenciesbetween100MHzand6GHz.Whentheminimumtest separationdistanceis<5mm,adistanceof5mmisappliedtodetermineSARtest exclusion. 2.2EUTRFEXPOSUREEVALUATION Channel (MHz) Conducted Power(dBm) Tuneup Tolerance(dBm) Maximum tune-upPower Calculated value Limit (dBm)(mW) 3DH5-24801.41 2.0±1 3.01.9950.62843.0 Calculatedvalueis0.6284<3.0,SothereisnorequireSARtest.

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dB Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

V1.0ReportNo.: DACE251010009RL001 102, BuildingH1, & 1/F., BuildingH, HongfaScience& TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel: +86-755-23010613E-mail:[email protected] 1 of 93 RF TEST REPORT For ShenzhenBoshikeMicroelectronicsCo., Ltd. ProductName:Projectorspeaker Test Model(s):M3P ReportReferenceNo.:DACE251010009RL001 FCC ID: 2BS9F-M3P Applicant’s Name:ShenzhenBoshikeMicroelectronicsCo., Ltd. Address: 402 HengtaiYunguCreativePark,No.77-3ShangweiNew Village, SongyuanxiaCommunity,GuanhuStreet,LonghuaDistrict,Shenzhen TestingLaboratory:ShenzhenDACETestingTechnologyCo., Ltd. Address: 102, BuildingH1, & 1/F., BuildingH, HongfaScience& TechnologyPark, TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen, Guangdong,China Test SpecificationStandard:47 CFR Part 15.247 Date of Receipt:October10, 2025 Date of Test:October10, 2025,2025to October27 , 2025 Data of Issue:October27 , 2025 Result:Pass Note:This reportshallnot be reproducedexceptin full, withoutthe writtenapprovalof ShenzhenDACE TestingTechnologyCo., Ltd. This documentmay be alteredor revisedby ShenzhenDACETestingTechnology Co., Ltd. personnelonly, and shallbe notedin the revisionsectionof the document.The test resultsin the reportonly applyto the testedsample V1.0ReportNo.:DACE251010009RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 2 of 93 Applyforcompanyinformation Applicant’sName:ShenzhenBoshikeMicroelectronicsCo.,Ltd. Address:402HengtaiYunguCreativePark,No.77-3ShangweiNewVillage, SongyuanxiaCommunity,GuanhuStreet,LonghuaDistrict,Shenzhen ProductName:Projectorspeaker TestModel(s):M3P SeriesModel::M1P,M2P,M4P,M5P,M6P,M7P,M8P,M9P,S1P,S2P,S3P,S4P,S5P, S6P,S7P,S8P,S9P,T1P,T2P,T3P,T4P,T5P,T6P,T7P,T8P,T9P,G1P, G2P,G3P,G4P,G5P,G6P,G7P,,G8P,G9P,E10P,E11P,E12P,E13P, S10P,S20P,S30P,S40P,C3P,Y30P,C6,C6P TestSpecificationStandard(s):47CFRPart15.247 NOTE1: Themanufacturershouldensurethatallproductsinseriesproductionareinconformitywiththeproductsampledetailedin thisreport.Iftheproductinthisreportisusedinanyconfigurationotherthanthatdetailedinthereport,themanufacturer mustensurethenewsystemcomplieswithallrelevantstandards. Compiledby:Supervisedby:Approvedby: KerenHuang/TestEngineerStoneYin/ProjectEngineerTomChen/Manager October27,2025October27,2025October27,2025 V1.0ReportNo.:DACE251010009RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 3 of 93 RevisionHistoryOfReport VersionDescriptionREPORTNo.IssueDate V1.0OriginalDACE251010009RL001October27,2025 V1.0ReportNo.:DACE251010009RL001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouCommunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 4 of 93 CONTENTS 1TESTSUMMARY...................................................................................................................................................6 1.1TESTSTANDARDS........................................................................................................................................6 1.2SUMMARYOFTESTRESULT.........................................................................................................................6 2GENERALINFORMATION....................................................................................................................................7 2.1CLIENTINFORMATION..................................................................................................................................7 2.2DESCRIPTIONOFDEVICE(EUT)..................................................................................................................7 2.3DESCRIPTIONOFTESTMODES....................................................................................................................8 2.4DESCRIPTIONOFSUPPORTUNITS................................................................................................................9 2.5EQUIPMENTSUSEDDURINGTHETEST........................................................................................................9 2.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................11 2.7IDENTIFICATIONOFTESTINGLABORATORY.................................................................................................12 2.8ANNOUNCEMENT.......................................................................................................................................12 3EVALUATIONRESULTS(EVALUATION)...........................................................................................................13 3.1ANTENNAREQUIREMENT............................................................................................................................13 4RADIOSPECTRUMMATTERTESTRESULTS(RF).........................................................................................14 4.1CONDUCTEDEMISSIONATACPOWERLINE................................................................................................14 4.1.1E.U.T.Operation:........................................................................................................................14 4.1.2TestSetupDiagram:...................................................................................................................14 4.1.3TestData:...................................................................................................................................15 4.220DBBANDWIDTH..................................................................................................................................…

Text truncated - open the document above for the full version.

FCCID:2BS9F-M3P Testsetup ConductedEmissionatACpowerline Emissionsinfrequencybands(below1GHz) Emissionsinfrequencybands(above1GHz)