2BSW8-FLAT3CSmart Phone

FLAT 3C Smart Phone FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. ISED Statement: This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux RSS sans licence d’Industrie Canada. L’exploitation est soumise aux deux conditions suivantes : (1) Ce dispositif ne peut causer d'interférences ; et (2) Ce dispositif doit accepter toute interférence , y compris les interférences qui peuvent causer un mauvais fonctionnement de l'appareil. RF Exposure Statement SAR tests are conducted using standard operating positions according standards with the device transmitting at its highest certified power level in all tested frequency bands, although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This model product has been tested and meets the RF exposure guidelines with the test distance 0mm for head and 5mm for body worn. The highest SAR 1g value is 0.706 W/Kg for head and 0.641W/Kg for body worn. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these req uirements may not comply with RF exposure requirements, and should be avoided Les tests DAS sont effectués dans des positions d'utilisation standard, conformément aux normes, l'appareil émettant à sa puissance maximale certifiée dans toutes les bandes de fréquences testées. Bien que le DAS soit déterminé à la puissance maximale certifiée, le niveau DAS réel de l'appareil en fonctionnement peut être nettement inférieur à cette valeur maximale. Ce modèle a été testé et est conforme aux directives d'exposition aux radiofréquences (RF) avec une distance de test de 0 mm pour la tête et de 5 mm pour le port sur le corps. La valeur DAS maximale (1 g) est de 0,706 W/kg pour la tête et de 0,641W/kg pour le port sur le corps. Les attaches de ceinture, étuis et accessoires similaires ne doivent pas contenir de composants métalliques. L'utilisation d'accessoires non conformes à ces exigences peut entraîner une non- conformité aux exigences d'exposition aux RF et devrait être évitée.

HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Mar. 2, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2BSW8-FLAT3C HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Xiuying Zou Title: Manager Address: 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China Tel.: 75532909320 Email: [email protected]

HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Mar. 13, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2BSW8-FLAT3C] Product Name: [Smart Phone] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Xiuying Zou Title: Manager Address: 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China Tel.: 75532909320 Email: [email protected] HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☐ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. ☐ The Memory used is limited to run the Cybersecurity or anti-virus software. ☐ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. ☐ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Device is not Inherent compliance ☒ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) Section Component Name Version Supplier 1 Android Auto 14.2.651614- release Android 2 Android Keyboard (AOSP) Android 3 Chrome 131.0.6778.260 Google 4 Gboard 14.8.05.686567 880-release arm64 v8a Google 5 Gmail 2025.01.05.715 468168.Release Google 6 Google 16.2.40.ve.arm6 4 Google 7 Google Play services 25.13.13(26040 0-745790146) Google 8 Google Play Store 45.0.21-31 [0] [PR] 728331212 Google 9 Google Tv 4.39.2835.7011 68117.6-release Google 10 Maps 25.03.01.715545 067 Google 11 YouTube 20.02.40 Google 12 YouTube Music 7.16.52 Google

HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong,Kowloon,HongKong Federal Communications Commission Date：2026-03-02 Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2BSW8-FLAT3C FRN: 0037627072 US Agent – Attestation Statement / Part 2.911(d)(7) HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED certifies, that as of 2025-12-12, we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2BSW8- FLAT3C. [HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED for FCC ID: 2BSW8-FLAT3C. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED Designated Agent: FCC US Agent, LLC Company Representative: Xiuying Zou Designated Agent Representative: Tim Payne Signature: Signature:

HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China Date: Mar. 2, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2BSW8-FLAT3C Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description  Part list  Tune up  FCC Software Security Requirements for UNII devices The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely yours, Applicant Signature Printed Name: Xiuying Zou Title: Manager Address: 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China Tel.: 75532909320 Email: [email protected]

HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China Date: Mar. 2, 2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2BSW8-FLAT3C I, the undersigned, hereby authorize Guangdong Asia Hongke Test Technology Limited to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by Guangdong Asia Hongke Test Technology Limited shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED. We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely yours, Applicant Signature Printed Name: Xiuying Zou Title: Manager Address: 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China Tel.: 75532909320 Email: [email protected]

Page 1 of 4 FCC ID: 2BSW8-FLAT3C External Photos Page 2 of 4 FCC ID: 2BSW8-FLAT3C Page 3 of 4 FCC ID: 2BSW8-FLAT3C Page 4 of 4 FCC ID: 2BSW8-FLAT3C

E-label will used Information can obtain as follow step: The instruction manual shows the location of the description of the E-Label query method, as shown in the image below. Check your certification number If you want to check your certification number, pleasefollow these steps: Settings - About Phone - Certification. FCC ID:2BSW8-FLAT3C

Page 1 of 6 FCC ID: 2BSW8-FLAT3C Internal photos WLAN/BT antenna WWAN DIV antenna WWAN main antenna Page 2 of 6 FCC ID: 2BSW8-FLAT3C WWAN DIV antenna Page 3 of 6 FCC ID: 2BSW8-FLAT3C WLAN/BT antenna WWAN DIV antenna

Page 4 of 6 FCC ID: 2BSW8-FLAT3C Page 5 of 6 FCC ID: 2BSW8-FLAT3C Page 6 of 6 FCC ID: 2BSW8-FLAT3C

Page 1 of 27 Report No.: AiTSZ-260127023FE1 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name:Smart Phone Brand Name:OSCAL Model: FLAT 3C FCC ID:2BSW8-FLAT3C Series Model: N/A Applicant :HONG KONG LELEGAO TECHNOLOGY CO.,LIMITED Address: 19H Maxgrand Plaza, No.3 Tai Yau Street, San Po Kong, Kowloon, HongKong, China Manufacturer:Shenzhen Doke Electronic Co., LTD Address: 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China Standard(s): FCC CFR Title 47 Part 15 Subpart B ICES-003 Issue 7 Date of Receipt:Jan. 27, 2026 Date of Test:Jan. 27, 2026~ Feb. 06, 2026 Issued Date:Feb. 06, 2026 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Aalen.Ye Allen Wang Page 2 of 27 Report No.: AiTSZ-260127023FE1 Report Revise Record Report VersionIssued DateNotes M0Feb. 06, 2026Initial Release Page 3 of 27 Report No.: AiTSZ-260127023FE1 Contents 1TEST SUMMARY......................................................................................................................................................4 1.1TEST STANDARDS.........................................................................................................................................................4 1.2TEST SUMMARY...........................................................................................................................................................4 1.3TEST FACILITY..............................................................................................................................................................5 1.4MEASUREMENT UNCERTAINTY........................................................................................................................................5 2GENERAL INFORMATION ........................................................................................................................................6 2.1ENVIRONMENTAL CONDITIONS........................................................................................................................................6 2.2GENERAL DESCRIPTION OF EUT ......................................................................................................................................6 2.3DESCRIPTION OF TEST MODES........................................................................................................................................6 2.4SPECIAL ACCESSORIES...................................................................................................................................................7 2.5EQUIPMENT LIST FOR THE TEST.......................................................................................................................................7 3TEST CONDITIONS AND RESULTS.............................................................................................................................8 3.1CONDUCTED EMISSION.................................................................................................................................................8 3.2RADIATED EMISSION...................................................................................................................................................11 4TEST SETUP PHOTOGRAPHS OF EUT ......................................................................................................................17 5PHOTOGRAPHS OF EUT .........................................................................................................................................18 Page 4 of 27 Report No.: AiTSZ-260127023FE1 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: 47 CFR FCC Part 15 Subpart B - Unintentional Radiators ICES-003 Issue 7 - Information Technology Equipment (including Digital Apparatus) ANSI C63.4: 2014 – American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40GHz 1.2 Test Summary Test ItemSection in CFR 47Test Result AC Power Line Conducted Emission FCC Part 15 B (Section15.107) ICES-003 Issue 7 (Section 3.1) PASS Electric Field Radiated Emissions FCC Part 15 B (Section15.109) ICES-003 Issue 7 (Section3.2) PASS Page 5 of 27 Report No.: AiTSZ-260127023FE1 1.3 Test Facility Test Laboratory: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China The test facility is recognized, certified or accredited by the following organizations: FCC-Registration No.: 251906 Designation Number: CN1376 Guangdong Asia Hongke Test Technology Limited has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. IC —Registration No.: 31737 CAB identifier: CN0165 The 3m Semi-anechoic chamber of Guangdong Asia Hongke T…

Text truncated - open the document above for the full version.

FCC ID: 2BSW8-FLAT3C Conducted Emission Radiated Emission