2BTLL-GNM01Laptop Computer

Hereby, Shenzhen Geekom Electronic Technology Co.Ltd declares that this laptop computer is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. M16 1. Power button Press to turn on the laptop if it is turned off, in sleep state, or in hibernation state. Press to put the laptop in sleep state if it is turned on. Press and hold for 10 seconds to force shut-down the computer. 2. Left-click area Press to left-click. 3. Right-click area Press to right-click. 4. Caps Lock light(on the keyboard) Click on capslock,light on means uppercase, off means lowercase. 1. Right speaker Provide audio output. 2. Left speaker Provide audio output. 3. Rubber foot Prevent scratches and enhance heat dissipation on the bottom of the computer. 1/5. Microphone Provide digital sound input for audio recording, voice calls, and so on. 2. Camera-status indicator Turn on when the camera is in use. 3. Camera shutter Open or close the camera lens. 4. Light sensor You can control the brightness of the screen, and the display can change with the external environment. Adapter: HKC10020050-0K2/HKC10020050-0K4 Input:100-240V~50/60Hz,2.5A Ouput:20.0V 5.0A 100.0W Frequency Range&Maximum Transmit Power: BT: 2400-2483.5MHz Maximum Power：2.36dBm Wi-Fi 2.4GHz(TX/RX): 2400-2483.5 MHz Maximum Power:14.08dBm Wi-Fi 5G: Band 1: 5150-5250 MHz(TX/RX) Maximum Power:15.27dBm Band 2: 5250-5350 MHz(TX/RX) Maximum Power:14.70dBm Band 3: 5470-5725 MHz(TX/RX) Maximum Power:14.60dBm Wi-Fi 5.8G : 5725-5875MHz(TX/RX) Maximum Power:12.02dBm SAR Warning Notice RF exposure information For the countries that adopt the SAR limit of 2.0 W/kg(Body) and 4.0 W/kg(Limbs) over 10 grams of tissue. Device has also been tested against this SAR limit. WiFi Warning Notice This device may be restricted for use, depending on the local network. The 5150 to 5350 MHz frequency ranges are restricted to indoor use in: AT, BE, BG, CH, CY,CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IS, IT, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK, TR, UK(NI). In accordance with the relevant statutory requirements in the UK, the 5150 to 5350 MHz and 5945 to 6425 MHz frequency ranges are restricted to indoor use in the United Kingdom. The WLAN function for this device is restricted to indoor use due to its operation in the 5.15 to 5.35 GHz frequency range. The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. FCC RF Exposure Warning Statement This equipment has been tested for SAR compliance. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. For USA: The frequency stability of all transmission frequencies of U-NII-1, U-NII 2A, U-NII 2C and U-NII-3 meets the requirements of 47 CFR FCC Part15.407(g), and the manufacturer declares that their transmission is maintained at Band U-NII-1, U-NII 2A, U-NII 2C and U-NII-3. ENERGY STAR ® Pr ogram Requirements fo r Computers Partn er Commitments Fol lowing are the t erms of t he E NERGY STAR Partne rshi p Agreemen t a s it pertains to the man uf ac ture an d label ing of E NERGY STAR certified produ cts . The E NERGY STAR Partner mus t a dhere to th e fol lowi ng pa rtn er commitments: 1. Partner sha ll a dh er e t o the fol lowi ng produc t-spe cific c ommitmen ts regarding us e of th e ENERGY STAR certificati on mar k on certified produc ts: 1.1 . Partner mus t u se t he E NERGY S TAR mar k i n one of th e fol lowi ng ways: 1) Via perman en t or tempo rary lab el,. All t empo rar y labeling mus t b e affi xed to the prod uc t wi th an ad hes ive or c ling-type a pp licat ion : a. The l ab el s hall be on t he t op or f ron t of th e product if th e to p or f ron t o f the product ha s a conti guo us, c opl an ar surfac e area not us ed f or to uc h i npu t or displ ay t ha t is greater t ha n or equ al to 0.625 i n square; b. Otherwise, the label s hall be on the reverse side of th e s cree n; or 2) Via el ec tronic l abelin g displ ayed on t he scree n suc h that th e ENERGY S TAR mark must be at l eas t 4 % of th e screen by area; mus t b e grea ter than or equal to 76 pi xels x 78 pi xel s; mus t b e l egible; mus t b e in cyan, bl ac k, o r whi te; a nd eith er a. Mus t a ppe ar at system s tart-up , and mus t d ispl ay f or a mini mum o f 5 sec on ds ; or b. Must a ppe ar wi thi n th e s ystem power settings di al og wi ndow. EPA wi ll c on side r al ternati ve propos al s f or elec tronic l abel ing on a cas e-by-cas e bas is. 60 - 100 W USB PD 1.the power deliveredby the charger must be between min 60 Watts required by the radio equipment, and max 100 Watts in order toachieve the maximum charging speed 2.USB PD fast charging

Report No.: AGC12060251103FH01 Page 91 of 101 Z (mm) 0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 SAR (W/Kg) 0.498 0.326 0.182 0.149 0.108 0.068 0.049 0.113 0.099 0.077 0.095 0.092 3D screen shot Hot spot position Report No.: AGC12060251103FH01 Page 92 of 101 5.8GHz (U-NII-3) WIFI-802.11a-Chain B Test Laboratory: AGC Lab Date: Dec. 08, 2025 802.11a CH157- Body-Worn- Back DUT: Laptop Computer; Type: NM16DA Communication System: Wi-Fi; Communication System Band: 802.11a; Duty Cycle: 1:1; Conv.F=1.41; Frequency: 5785MHz; Medium parameters used: f = 5800 MHz; σ= 5.33mho/m; εr =36.42; ρ= 1000 kg/m³ ; Phantom section: Flat Section SATIMO Configuration: • Probe: SSE2; Calibrated: 2025-05-06; Serial No.: 2023-EPGO-414 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: ELLI39 Phantom • Measurement SW: OpenSAR V5.3.15.8 Configuration/ 802.11a CH157- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ 802.11a CH157- Body- Back /Zoom Scan: Measurement grid: dx=4mm,dy=4mm, dz=2mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 7x7x12 dx=4mm dy=4mm dz=2mm Phantom ELLI Device Position Body- Back Band 5800MHz Channels CH157 Signal Crest factor: 1.0 SURFACE SAR VOLUME SAR Maximum location: X=10.00, Y=-22.00 ; SAR Peak: 0.46 W/kg SAR 10g (W/Kg) 0.096 SAR 1g (W/Kg) 0.185 Variation (%) -1.400 Horizontal validation criteria: minimum distance (mm) 11.313708 Vertical validation criteria: SAR ratio M2/M1 (%) 65.117208 Report No.: AGC12060251103FH01 Page 93 of 101 Z (mm) 0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 SAR (W/Kg) 0.392 0.267 0.159 0.136 0.110 0.104 0.093 0.098 0.088 0.105 0.095 0.092 3D screen shot Hot spot position Report No.: AGC12060251103FH01 Page 94 of 101 5.8GHz (U-NII-3) WIFI-802.11ac40-Chain A Test Laboratory: AGC Lab Date: Dec. 08, 2025 802.11ac40 CH151- Body-Worn- Back DUT: Laptop Computer; Type: NM16DA Communication System: Wi-Fi; Communication System Band: 802.11ac40; Duty Cycle: 1:1; Conv.F=1.41; Frequency: 5755MHz; Medium parameters used: f = 5800 MHz; σ= 5.30mho/m; εr =36.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section SATIMO Configuration: • Probe: SSE2; Calibrated: 2025-05-06; Serial No.: 2023-EPGO-414 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: ELLI39 Phantom • Measurement SW: OpenSAR V5.3.15.8 Configuration/ 802.11ac40 CH151- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ 802.11ac40 CH151- Body- Back /Zoom Scan: Measurement grid: dx=4mm,dy=4mm, dz=2mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 7x7x12 dx=4mm dy=4mm dz=2mm Phantom ELLI Device Position Body- Back Band 5800MHz Channels CH151 Signal Crest factor: 1.0 SURFACE SAR VOLUME SAR Maximum location: X=-33.00, Y=-47.00 ; SAR Peak: 0.47 W/kg SAR 10g (W/Kg) 0.097 SAR 1g (W/Kg) 0.174 Variation (%) -1.830 Horizontal validation criteria: minimum distance (mm) 14.422205 Vertical validation criteria: SAR ratio M2/M1 (%) 59.813776 Report No.: AGC12060251103FH01 Page 95 of 101 Z (mm) 0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 SAR (W/Kg) 0.331 0.238 0.128 0.124 0.114 0.101 0.072 0.088 0.074 0.083 0.092 0.077 3D screen shot Hot spot position Report No.: AGC12060251103FH01 Page 96 of 101 5.8GHz (U-NII-3) WIFI-802.11ac40-Chain B Test Laboratory: AGC Lab Date: Dec. 08, 2025 802.11ac40 CH151- Body-Worn- Back DUT: Laptop Computer; Type: NM16DA Communication System: Wi-Fi; Communication System Band: 802.11ac40; Duty Cycle: 1:1; Conv.F=1.41; Frequency: 5755MHz; Medium parameters used: f = 5800 MHz; σ= 5.30mho/m; εr =36.79; ρ= 1000 kg/m³ ; Phantom section: Flat Section SATIMO Configuration: • Probe: SSE2; Calibrated: 2025-05-06; Serial No.: 2023-EPGO-414 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: ELLI39 Phantom • Measurement SW: OpenSAR V5.3.15.8 Configuration/ 802.11ac40 CH151- Body- Back /Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ 802.11ac40 CH151- Body- Back /Zoom Scan: Measurement grid: dx=4mm,dy=4mm, dz=2mm Area Scan sam_direct_droit2_surf8mm.txt ZoomScan 7x7x12 dx=4mm dy=4mm dz=2mm Phantom ELLI Device Position Body- Back Band 5800MHz Channels CH151 Signal Crest factor: 1.0 SURFACE SAR VOLUME SAR Maximum location: X=9.00, Y=-9.00 ; SAR Peak: 0.39 W/kg SAR 10g (W/Kg) 0.111 SAR 1g (W/Kg) 0.178 Variation (%) -1.450 Horizontal validation criteria: minimum distance (mm) 11.628331 Vertical validation criteria: SAR ratio M2/M1 (%) 64.026125 Report No.: AGC12060251103FH01 Page 97 of 101 Z (mm) 0.00 2.00 4.00 6.00 8.00 10.00 12.00 14.00 16.00 18.00 20.00 22.00 SAR (W/Kg) 0.283 0.232 0.181 0.137 0.145 0.136 0.112 0.098 0.112 0.086 0.143 0.135 3D screen shot Hot spot position Report No.: AGC12060251103FH01 Page 98 of 101 APPENDIX C. TEST SETUP PHOTOGRAPHS Body Back 0mm Edge 1 (Top) 0mm Report No.: AGC12060251103FH01 Page 99 of 101 DEPTH OF THE LIQUID IN THE PHANTOM—ZOOM IN Note：The position used in the measurement were according to IEEE Std. 1528:2013 2450MHz body 5000MHz body Report No.: AGC12060251103FH01 Page 100 of 101 APPENDIX D. CALIBRATION DATA Refer to Attached files. Report No.: AGC12060251103FH01 Page 101 of 101 Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issu…

Text truncated - open the document above for the full version.

Report No.: AGC12060251103AP02 Page 1 of 3 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz Report No.: AGC12060251103AP02 Page 2 of 3 AC POWER LINE CONDUCTED TEST SETUP RF CONDUCTED TEST SETUP (BT) Report No.: AGC12060251103AP02 Page 3 of 3 RF CONDUCTED TEST SETUP (WIFI) RF CONDUCTED TEST SETUP (DFS) ****************************************End of Report*************************************

Shenzhen Yishengbang Technology Co., Ltd Antenna Test Report Customer:迈迪杰 Project: NM16D Product: WIFI Report date: 2025.12.01 Prepared by : 胡雪文 Checked by : 黄震 Approved by : 林美财 深圳市亿圣邦科技有限公司 深圳市迈迪杰科技有限公司 1 Purpose This report is to measure the performance of SLK for Master Antenna on迈迪杰. All measure data are showed below. Content 1. Product Overview 2.Test Result 2.1 WIFI MAIN Antenna VSWR 2.2 WIFI MAIN Antenna Gain/Efficiency/3D DATA 2.3 WIFI AUX Antenna VSWR 2.4 WIFI AUX Antenna Gain/Efficiency/3D DATA 2.5 WIFI active test 2.6 WIFI throughput test 3. Conclusions 深圳市亿圣邦科技有限公司 2 1. Product Overview 深圳市亿圣邦科技有限公司 3 1. Product Overview 深圳市亿圣邦科技有限公司 4 2. Test Result 2.1 WIFI MAIN Antenna VSWR/S11 深圳市亿圣邦科技有限公司 5 深圳市亿圣邦科技有限公司 6 2. Test Result 2.2 WIFI MAIN Antenna Gain/Efficiency/3D DATA Frequency (MHz) Efficiency (dBi)Gain (dBi)Efficiency (%) 2400 -5.61 0.47 27.50 2410 -5.09 0.96 31.01 2420 -4.77 0.94 33.31 2430 -4.39 1.29 36.37 2440 -4.59 1.17 34.75 2450 -4.49 1.73 35.59 2460 -4.68 1.91 34.04 2470 -4.45 1.49 35.87 2480 -4.56 1.32 35.00 2490 -4.93 1.59 32.13 2500 -5.06 1.11 31.16 5150 -4.88 1.95 32.53 5350 -4.39 1.62 36.35 5550 -4.27 2.90 37.39 5750 -3.75 2.01 42.16 5850 -4.16 1.28 38.33 6150 -4.79 1.80 33.16 6350 -6.49 1.71 22.44 6550 -5.37 2.07 29.01 6750 -4.52 2.60 35.35 6850 -5.56 1.48 27.83 7050 -6.29 1.67 23.49 7150 -7.61 1.10 17.35 2. Test Result 2.3 WIFI AUX Antenna VSWR/S11 深圳市亿圣邦科技有限公司 7 深圳市亿圣邦科技有限公司 8 2. Test Result 2.4 WIFI AUX Antenna Gain/Efficiency/3D DATA Frequency (MHz) Efficiency (dBi)Gain (dBi)Efficiency (%) 2400 -6.05 1.06 24.85 2410 -5.79 1.59 26.39 2420 -6.02 1.41 25.01 2430 -6.06 1.71 24.80 2440 -6.07 1.46 24.69 2450 -5.40 1.75 28.83 2460 -5.24 1.01 29.94 2470 -5.00 1.23 31.60 2480 -4.90 1.33 32.38 2490 -4.66 1.50 34.21 2500 -4.23 1.79 37.80 5150 -5.36 1.26 29.12 5350 -4.90 2.26 32.39 5550 -4.56 2.31 34.97 5750 -4.37 2.24 36.54 5850 -4.57 2.49 34.92 6150 -6.71 1.62 21.31 6350 -6.30 1.97 23.45 6550 -6.10 1.04 24.54 6750 -5.82 1.88 26.19 6850 -5.70 1.81 26.93 7050 -6.37 1.02 23.06 7150 -6.77 1.29 21.04 深圳市亿圣邦科技有限公司 9 2. Test Result 2.5 WIFI active test WIFI有源测试 频段1611 B-TRP-11MBps 15.4715.1314.38 B-TIS-11MBps -82.13-82.18-81.91 G-TRP-54MBps 11.3014.0910.65 G-TIS-54MBps -69.07-70.37-69.87 N-TRP-MCS7 10.9712.1110.01 N-TIS-MCS7 -65.08-66.27-65.70 频段 36149165 A-TRP-54MBps 11.5515.5815.36 A-TIS-54MBps -72.45-72.88-72.54 AN-TRP-MCS7 10.3215.1315.02 AN-TIS-MCS7 -68.03-68.60-68.45 深圳市亿圣邦科技有限公司 10 2. Test Result 2.6 WIFI throughput test 2.4G吞吐量 上传401M 2.4G吞吐量 下载420M 深圳市亿圣邦科技有限公司 11 2. Test Result 2.6 WIFI throughput test 5G吞吐量 上传869M 5G吞吐量 下载874M 深圳市亿圣邦科技有限公司 12 2. Test Result 2.6 BT throughput test BT吞吐量 上传1.37M BT吞吐量 下载1.40M 3. Conclusions 深圳市亿圣邦科技有限公司 13

ReportNo.:AGC12060251103FR03 Page41of167 Test_Graph_802.11b_ChainB_2462_1Mbps_OBW Test_Graph_802.11g_ChainB_2412_6Mbps_OBW ReportNo.:AGC12060251103FR03 Page42of167 Test_Graph_802.11g_ChainB_2437_6Mbps_OBW Test_Graph_802.11g_ChainB_2462_6Mbps_OBW ReportNo.:AGC12060251103FR03 Page43of167 Test_Graph_802.11n20_ChainB_2412_MCS0_OBW Test_Graph_802.11n20_ChainB_2437_MCS0_OBW ReportNo.:AGC12060251103FR03 Page44of167 Test_Graph_802.11n20_ChainB_2462_MCS0_OBW Test_Graph_802.11n40_ChainB_2422_MCS0_OBW ReportNo.:AGC12060251103FR03 Page45of167 Test_Graph_802.11n40_ChainB_2437_MCS0_OBW Test_Graph_802.11n40_ChainB_2452_MCS0_OBW ReportNo.:AGC12060251103FR03 Page46of167 Test_Graph_802.11ax20_ChainB_2412_MCS0_OBW Test_Graph_802.11ax20_ChainB_2437_MCS0_OBW ReportNo.:AGC12060251103FR03 Page47of167 Test_Graph_802.11ax20_ChainB_2462_MCS0_OBW Test_Graph_802.11ax40_ChainB_2422_MCS0_OBW ReportNo.:AGC12060251103FR03 Page48of167 Test_Graph_802.11ax40_ChainB_2437_MCS0_OBW Test_Graph_802.11ax40_ChainB_2452_MCS0_OBW ReportNo.:AGC12060251103FR03 Page49of167 TestGraphsofDTSBandwidth Test_Graph_802.11b_ChainA_2412_1Mbps_DTSBW Test_Graph_802.11b_ChainA_2437_1Mbps_DTSBW ReportNo.:AGC12060251103FR03 Page50of167 Test_Graph_802.11b_ChainA_2462_1Mbps_DTSBW Test_Graph_802.11g_ChainA_2412_6Mbps_DTSBW ReportNo.:AGC12060251103FR03 Page51of167 Test_Graph_802.11g_ChainA_2437_6Mbps_DTSBW Test_Graph_802.11g_ChainA_2462_6Mbps_DTSBW ReportNo.:AGC12060251103FR03 Page52of167 Test_Graph_802.11n20_ChainA_2412_MCS0_DTSBW Test_Graph_802.11n20_ChainA_2437_MCS0_DTSBW ReportNo.:AGC12060251103FR03 Page53of167 Test_Graph_802.11n20_ChainA_2462_MCS0_DTSBW Test_Graph_802.11n40_ChainA_2422_MCS0_DTSBW ReportNo.:AGC12060251103FR03 Page54of167 Test_Graph_802.11n40_ChainA_2437_MCS0_DTSBW Test_Graph_802.11n40_ChainA_2452_MCS0_DTSBW ReportNo.:AGC12060251103FR03 Page55of167 Test_Graph_802.11ax20_ChainA_2412_MCS0_DTSBW Test_Graph_802.11ax20_ChainA_2437_MCS0_DTSBW ReportNo.:AGC12060251103FR03 Page56of167 Test_Graph_802.11ax20_ChainA_2462_MCS0_DTSBW Test_Graph_802.11ax40_ChainA_2422_MCS0_DTSBW ReportNo.:AGC12060251103FR03 Page57of167 Test_Graph_802.11ax40_ChainA_2437_MCS0_DTSBW Test_Graph_802.11ax40_ChainA_2452_MCS0_DTSBW ReportNo.:AGC12060251103FR03 Page58of167 Test_Graph_802.11b_ChainB_2412_1Mbps_DTSBW Test_Graph_802.11b_ChainB_2437_1Mbps_DTSBW ReportNo.:AGC12060251103FR03 Page59of167 Test_Graph_802.11b_ChainB_2462_1Mbps_DTSBW Test_Graph_802.11g_ChainB_2412_6Mbps_DTSBW ReportNo.:AGC12060251103FR03 Page60of167 Test_Graph_802.11g_ChainB_2437_6Mbps_DTSBW Test_Graph_802.11g_ChainB_2462_6Mbps_DTSBW

Page 1 of 167 FCCTestReport ReportNo.:AGC12060251103FR03 FCCID:2BTLL-GNM01 APPLICATIONPURPOSE:OriginalEquipment PRODUCTDESIGNATION:LaptopComputer BRANDNAME:GEEKOM MODELNAME: NM16DA,NM16D7,NM16D***(*Representingnumbers 0-9,lettersA-Z,a-z,"-"orspaces) APPLICANT:ShenzhenGeekomElectronicTechnologyCo.,Ltd DATEOFISSUE:Jan.09,2026 STANDARD(S):FCCPart15SubpartC§15.247 REPORTVERSION:V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC12060251103FR03 Page2of167 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Jan.09,2026ValidInitialRelease ReportNo.:AGC12060251103FR03 Page3of167 TableofContents 1.GeneralInformation..........................................................................................................................................5 2.ProductInformation..........................................................................................................................................6 2.1ProductTechnicalDescription....................................................................................................................6 2.2TableofCarrierFrequency.........................................................................................................................7 2.3IEEE802.11nModulationScheme.............................................................................................................8 2.4RelatedSubmittal(S)/Grant(S).................................................................................................................9 2.5TestMethodology........................................................................................................................................9 2.6SpecialAccessories....................................................................................................................................9 2.7EquipmentModifications.............................................................................................................................9 2.8AntennaRequirement.................................................................................................................................9 2.9DescriptionofAvailableAntennas............................................................................................................10 2.10DescriptionofTestSoftware...................................................................................................................11 3.TestEnvironment............................................................................................................................................12 3.1AddressofTheTestLaboratory................................................................................................................12 3.2TestFacility................................................................................................................................................12 3.3EnvironmentalConditions.........................................................................................................................13 3.4MeasurementUncertainty........................................................................................................................13 3.5ListofEquipmentUsed.............................................................................................................................14 4.SystemTestConfiguration............................................................................................................................16 4.1EUTConfiguration....................................................................................................................................16 4.2EUTExercise............................................................................................................................................16 4.3ConfigurationofTestedSystem................................................................................................................16 4.4EquipmentUsedinTestedSystem..........................................................................................................17 4.5SummaryofTestResults..........................................................................................................................18 5.DescriptionofTestModes.............................................................................................................................19 6.DutyCycleMeasurement...............................................................................................................................20 7.RFOutputPowerMeasurement....................................................................................................................24 7.1ProvisionsApplicable................................................................................................................................24 7.2MeasurementProcedure..........................................................................................................................24 7.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................24 7.4MeasurementResult.................................................................................................................................25 8.6dBBandwidthMeasurement.......................................................................................................................28 8.1ProvisionsApplicable................................................................................................................................28 8.2MeasurementProcedure..........................................................................................................................28 8.3MeasurementSetup(BlockDiagramofConfiguration)...........................................................................28 8.4MeasurementResult..............................................................................................................................…

Text truncated - open the document above for the full version.

ReportNo.:AGC12060251103FR02 Page39of62 Test_Graph_LE1M_ANT1_2480_1Mbps_HigherBandEmissions Test_Graph_LE2M_ANT1_2402_2Mbps_ReferenceLevel ReportNo.:AGC12060251103FR02 Page40of62 Test_Graph_LE2M_ANT1_2402_2Mbps_LowerBandEmissions Test_Graph_LE2M_ANT1_2402_2Mbps_HigherBandEmissions ReportNo.:AGC12060251103FR02 Page41of62 Test_Graph_LE2M_ANT1_2440_2Mbps_ReferenceLevel Test_Graph_LE2M_ANT1_2440_2Mbps_LowerBandEmissions ReportNo.:AGC12060251103FR02 Page42of62 Test_Graph_LE2M_ANT1_2440_2Mbps_HigherBandEmissions Test_Graph_LE2M_ANT1_2480_2Mbps_ReferenceLevel ReportNo.:AGC12060251103FR02 Page43of62 Test_Graph_LE2M_ANT1_2480_2Mbps_LowerBandEmissions Test_Graph_LE2M_ANT1_2480_2Mbps_HigherBandEmissions ReportNo.:AGC12060251103FR02 Page44of62 TestGraphsofBandEdgeEmissionsinNon-RestrictedFrequencyBands Test_Graph_LE1M_ANT1_2402_1Mbps_LowerBandEdgeEmissions Test_Graph_LE1M_ANT1_2480_1Mbps_HigherBandEdgeEmissions ReportNo.:AGC12060251103FR02 Page45of62 Test_Graph_LE2M_ANT1_2402_2Mbps_LowerBandEdgeEmissions Test_Graph_LE2M_ANT1_2480_2Mbps_HigherBandEdgeEmissions ReportNo.:AGC12060251103FR02 Page46of62 11.RadiatedSpuriousEmission 11.1MeasurementLimit  FCCPart15.209Limitinthebelowtabletobefollowed Frequencies (MHz) FieldStrength (microvolts/meter) MeasurementDistance (meters) 0.009~0.4902400/F(kHz)300 0.490~1.70524000/F(kHz)30 1.705~30.03030 30~881003 88~2161503 216~9602003 Above9605003 Note:Allmodesweretestedforrestrictedbandradiatedemission,thetestrecordsreportedbelowaretheworst resultcomparedtoothermodes. 11.2MeasurementProcedure 1.TheEUTwasplacedonthetopoftheturntable0.8or1.5meteraboveground.Thephasecenterofthe receivingantennamountedonthetopofaheight-variableantennatowerwasplaced3metersfaraway fromtheturntable. 2.PowerontheEUTandallthesupportingunits.Theturntablewasrotatedby360degreestodeterminethe positionofthehighestradiation. 3.Theheightofthebroadbandreceivingantennawasvariedbetweenonemeterandfourmetersabove groundtofindthemaximumemissionsfieldstrengthofbothhorizontalandverticalpolarization. 4.Foreachsuspectedemission,theantennatowerwasscan(from1Mto4M)andthentheturntablewas rotated(from0degreeto360degrees)tofindthemaximumreading. 5.Setthetest-receiversystemtoPeakorCISPRquasi-peakDetectFunctionwithspecifiedbandwidthunder MaximumHoldMode. 6.Foremissionsabove1GHz,use1MHzRBWand3MHzVBWforpeakreading.Placethemeasurement antennaawayfromeachareaoftheEUTdeterminedtobeasourceofemissionsatthespecified measurementdistance,whilekeepingthemeasurementantennaaimedatthesourceofemissionsateach frequencyofsignificantemissions,withpolarizationorientedformaximumresponse.Themeasurement antennamayhavetobehigherorlowerthantheEUT,dependingontheradiationpatternoftheemission andstayingaimedattheemissionsourceforreceivingthemaximumsignal.Thefinalmeasurement antennaelevationshallbethatwhichmaximizestheemissions.Themeasurementantennaelevationfor maximumemissionsshallberestrictedtoarangeofheightsoffrom1mto4mabovethegroundor referencegroundplane. ReportNo.:AGC12060251103FR02 Page47of62 7.Whentheradiatedemissionslimitsareexpressedintermsoftheaveragevalueoftheemissions,and pulsedoperationisemployed,themeasurementfieldstrengthshallbedeterminedbyaveragingoverone completepulsetrain,includingblankingintervals,aslongasthepulsetraindoesnotexceed0.1seconds. 8.Asanalternative(providedthetransmitteroperatesforlongerthan0.1seconds)orincaseswherethe pulsetrainexceeds0.1seconds,themeasuredfieldstrengthshallbedeterminedfromtheaverage absolutevoltageduringa0.1secondintervalduringwhichthefieldstrengthisatitsmaximumvalues. 9.IftheemissionsleveloftheEUTinpeakmodewas3dBlowerthantheaveragelimitspecified,then testingwillbestoppedandpeakvaluesofEUTwillbereported,otherwise,theemissionswhichdonot have3dBmarginwillberepeatedonebyoneusingthequasi-peakmethodforbelow1GHz. 10.Fortestingabove1GHz,theemissionsleveloftheEUTinpeakmodewaslowerthanaveragelimit(that meanstheemissionslevelinpeakmodealsocomplieswiththelimitinaveragemode),thentestingwillbe stoppedandpeakvaluesofEUTwillbereported,otherwise,theemissionswillbemeasuredinaverage modeagainandreported. 11.Incasetheemissionislowerthan30MHz,loopantennahastobeusedformeasurementandtherecorded datashouldbeQPmeasuredbyreceiver.High-Lowscanisnotrequiredinthiscase. Thefollowingtableisthesettingofspectrumanalyzerandreceiver. SpectrumParameterSetting Start~StopFrequency9kHz~150kHz/RB200HzforQP Start~StopFrequency150kHz~30MHz/RB9kHzforQP Start~StopFrequency30MHz~1000MHz/RB120kHzforQP Start~StopFrequency 1GHz~26.5GHz 1MHz/3MHzforPeak,1MHz/3MHzforAverage ReceiverParameterSetting Start~StopFrequency9kHz~150kHz/RB200HzforQP Start~StopFrequency150kHz~30MHz/RB9kHzforQP Start~StopFrequency30MHz~1000MHz/RB120kHzforQP ReportNo.:AGC12060251103FR02 Page48of62 Quasi-PeakMeasurementsbelow1GHz 1.Analyzercenterfrequencywassettothefrequencyoftheradiatedspuriousemissionofinterest 2.Spanwassetgreaterthan1MHz 3.RBW=asshowninthetableabove 4.Detector=CISPRquasi-peak 5.Sweeptime=autocouple 6.Tracewasallowedtostabilize PeakMeasurementsabove1GHz 1.Analyzercenterfrequencywassettothefrequencyoftheradiatedspuriousemissionofinterest 2.RBW=1MHz 3.VBW=3MHz 4.Detector=peak 5.Sweeptime=autocouple 6.Tracemode=maxhold 7.Tracewasallowedtostabilize AverageMeasurementsabove1GHz 1.Analyzercenterfrequencywassettothefrequencyoftheradiatedspuriousemissionofinterest 2.RBW=1MHz 3.VBW≥[3×RBW] 4.Detector=Poweraveraging(rms) 5.Averagingtype=power(i.e.,rms) 6.Sweeptime=auto 7.Performatraceaverageofatleast100traces. 8.Theapplicablecorrectionfactoris[10*log(1/D)],whereDisthedutycycle.Thefactorhadbeeneditedin the“InputCorrection”oftheSpectrumAnalyzer. ReportNo.:AGC12060251103FR02 Page49of62 11.3MeasurementSetup(BlockDiagramofConfiguration) RadiatedEmissionTestSetup9kHz-30MHz RadiatedEmissionTestSetup30MHz-1000MHz RadiatedEmissionTestSetupAbove1000MHz ReportNo.:AGC12060251103FR02 Page50of62 11.4MeasurementResult RadiatedEmissionBelow30MHz Theamplitudeofspuriousemissionsfrom9kHzto30MHzwhichareattenuatedmorethan20dBbelowthe permissiblevalueneednotbereported. Radiate…

Text truncated - open the document above for the full version.

Page 1 of 62 FCCTestReport ReportNo.:AGC12060251103FR02 FCCID:2BTLL-GNM01 APPLICATIONPURPOSE:OriginalEquipment PRODUCTDESIGNATION:LaptopComputer BRANDNAME:GEEKOM MODELNAME: NM16DA,NM16D7,NM16D***(*Representingnumbers 0-9,lettersA-Z,a-z,"-"orspaces) APPLICANT:ShenzhenGeekomElectronicTechnologyCo.,Ltd DATEOFISSUE:Jan.09,2026 STANDARD(S):FCCPart15SubpartC§15.247 REPORTVERSION:V1.0 AttestationOfGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC12060251103FR02 Page2of62 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Jan.09,2026ValidInitialRelease ReportNo.:AGC12060251103FR02 Page3of62 TableofContents 1.GeneralInformation..........................................................................................................................................5 2.ProductInformation..........................................................................................................................................6 2.1ProductTechnicalDescription....................................................................................................................6 2.2TestFrequencyList.....................................................................................................................................6 2.3RelatedSubmittal(S)/Grant(S).................................................................................................…

Text truncated - open the document above for the full version.