2BTVL-SAFEWAVEBANDSafewave Band

Safewave Band User Manual Table of Contents 1. Product Overview & Key Features 2. What’s in the Box? 3. Getting Started 4. App Setup & Functionality 5. Customizing Alerts & Sensitivity 6. Daily Use & Best Practices 7. Troubleshooting & FAQs 8. Safety & Compliance 9. Maintenance & Care 10. Warranty & Support 11. Legal & Privacy Information 1. Product Overview & Key Features At Safewave, we believe everyone deserves to feel connected to their world effortlessly. The Safewave Band transforms everyday mobile notifications into a gentle, customizable touch on your wrist—so you always stay in the loop without ever having to look down. Key Features That Fit Your Life: • Universal Compatibility: Syncs with any notification on iOS or Android. • Customizable Touch: Adjust vibration strength (1–100) and choose 1–5 taps per alert. • Seamless Style: Wear it on its own or alongside your Apple Watch. 2. What’s in the Box? Welcome to the Safewave experience! Inside your package, you’ll find: • Safewave Band: Ready to connect you to your world. • Charging Cable & Adapter: To keep you powered up. • Safewave Adapter: For easy wear. 3. Getting Started Let’s get you set up quickly! • Charging: Fully charge your band before the first use (about 50–80 minutes). A full charge lasts 2–3 days depending on notifications. • Power On: Press the power button once. You’ll feel two strong vibrations. • Power Off: Hold the power button for 3 seconds. You’ll feel a soft vibration. • Hard Reset: Hold the power button for 30 seconds if needed. 4. App Setup & Functionality Connect your Safewave Band in just a few steps: 1. Download the Safewave App from the Apple App Store or Google Play Store. 2. Turn on Bluetooth on your phone. 3. Open the Safewave App and follow on-screen instructions to pair. Approve the “Pair” and “Allow” pop-ups (especially on iOS). 4. Android users: Keep the app running in the background for reliable alerts. 5. Customizing Alerts & Sensitivity Make your Safewave Band truly yours: • Adjust vibration strength anywhere from a gentle tap to a firm nudge (1–100). • Choose how many times it vibrates per alert (1–5). • Works even if your phone is on Do Not Disturb mode. 6. Daily Use & Best Practices For the best experience, wear your Safewave Band with the ridges on the underside of your wrist and the adapter piece or Apple Watch face on top—just like any watch. Think of the app as your remote control: even if the band doesn’t show as connected, your settings are saved and the band will keep working as programmed. 7. Troubleshooting & FAQs Got a hiccup? Let’s fix it fast: • Band not appearing in the app? Go to your phone’s Bluetooth settings, forget the Safewave Band, then reconnect and approve “Pair” and “Allow”. • Weak or delayed vibrations? Recharge the band and check you’re within 30 feet of your phone. • Need a reset? Hold the power button for 30 seconds. 8. Safety & Compliance Your Safewave Band is built for everyday life: waterproof for showers and pools, and works best within 30 feet of your phone. We follow standard safety guidelines to keep you connected and safe. 9. Maintenance & Care To clean, simply rinse with warm water—it’s waterproof. When the battery is low, you’ll feel a strong long vibration and the red light will turn off. Place it on the wireless charger with ridges facing up so you can see the light. The red light blinks while charging. Use the app to check battery level. Full charge takes ~50–80 minutes (light stays on even when full). 10. Warranty & Support Your Safewave Band comes with a 3-month warranty for manufacturing defects and 30-day returns for unused or defective products. Need help? Contact us at [email protected]. 11. Legal & Privacy Information Your privacy matters. The Safewave app may collect anonymous usage data to improve the product and build better partnerships. Safewave is not a medical device. For details, review the privacy policy in the app. FCC Caution： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

(Safewave Technology Corporation) (2026.01.20) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID:2BTVL-SAFEWAVEBAND) [Safewave Technology Corporation] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Jared Gabbard (Safewave Technology Corporation) (2026.01.20) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID:2BTVL-SAFEWAVEBAND) [Safewave Technology Corporation] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Jared Gabbard

U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Safewave Technology Corporation FRN: 0037782398 Contact Name: Jared Gabbard Address: 2 W Pike St. Unit 3 Covington, KY 41011, USA Telephone No: 513-304-1186 Email: [email protected] This letter is to confirm that we (Safewave Technology Corporation) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2026/ 01/14 Signed by (Printed Name/Title): Jared Gabbard / Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Safewave Technology Corporation Grantee Code:2BTVL FCC ID: 2BTVL-SAFEWAVEBAND FRN: 0037782398 Email:[email protected] Contact Name: Jared Gabbard Address: 2 W Pike St. Unit 3 Covington, KY 41011, USA Telephone No: 513-304-1186 Applicant Signature: Date: 2026/ 01/14 Signed by (Printed Name/Title): Jared Gabbard / Manager Jared Gabbard (Jan 20, 2026 10:25:48 EST) Jared Gabbard Jared Gabbard (Jan 20, 2026 10:25:48 EST) Jared Gabbard Jared Gabbard (Jan 20, 2026 10:25:48 EST) Jared Gabbard FCC ID：2BTVL-SAFEWAVEBAND (002) Final Audit Report2026-01-20 Created:2026-01-19 By:COURTNEY PHILLIPS ([email protected]) Status:Signed Transaction ID:CBJCHBCAABAASxi3u8b-WT94KnxrmoopdPgtVrzJRccb History Document created by COURTNEY PHILLIPS ([email protected]) 2026-01-19 - 12:52:37 PM GMT Document emailed to Jared Gabbard ([email protected]) for signature 2026-01-19 - 12:52:41 PM GMT Email viewed by Jared Gabbard ([email protected]) 2026-01-20 - 3:24:20 PM GMT Document e-signed by Jared Gabbard ([email protected]) Signature Date: 2026-01-20 - 3:25:48 PM GMT - Time Source: server Agreement completed. 2026-01-20 - 3:25:48 PM GMT

Safewave Technology Corporation 2026.01.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Safewave Band Trademark: N/A MODEL : Safewave Band FCC ID : 2BTVL-SAFEWAVEBAND To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Jared Gabbard /Manager Contact information / address: 2 W Pike St. Unit 3 Covington, KY 41011, USA

Safewave Technology Corporation 2026.01.20 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Jared Gabbard /Manager Contact information / address: 2 W Pike St. Unit 3 Covington, KY 41011, USA

FCC ID:2BTVL-SAFEWAVEBAND External Photos FCC ID:2BTVL-SAFEWAVEBAND FCC ID:2BTVL-SAFEWAVEBAND

FCC ID:2BTVL-SAFEWAVEBAND Label location

FCC ID:2BTVL-SAFEWAVEBAND Internal Photos FCC ID:2BTVL-SAFEWAVEBAND FCC ID:2BTVL-SAFEWAVEBAND BLE Antenna Wireless Charging Receiving Antenna FCC ID:2BTVL-SAFEWAVEBAND

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.:STS2512456H01 Issued for Safewave Technology Corporation 2 W Pike St. Unit 3 Covington, KY 41011, USA Product Name: Safewave Band Brand Name: N/A Model Name: Safewave Band Series Model(s): N/A FCC ID: 2BTVL-SAFEWAVEBAND Test Standards: FCC 47CFR §2.1093 Page 2 of 8 Report No.: STS2512456H01 TEST REPORT Applicant’s Name ................. : Safewave Technology Corporation Address ................................. : 2 W Pike St. Unit 3 Covington, KY 41011, USA Manufacturer's Name ........... : Safewave Technology Corporation Address ................................. : 2 W Pike St. Unit 3 Covington, KY 41011, USA Product Description Product Name ........................ : Safewave Band Brand Name .......................... : N/A Model Name .......................... : Safewave Band Series Model(s) ...................... : N/A Test Standards ..................... : FCC 47CFR §2.1093 447498 D01 Interim General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 19 Dec. 2025 Date (s) of performance of tests ............. : 19 Dec. 2025 to 13 Jan. 2026 Date of Issue .......................................... : 14 Jan. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 8 Report No.: STS2512456H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 8 Page 4 of 8 Report No.: STS2512456H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 14 Jan. 2026 STS2512456H01 ALL Initial Issue Page 5 of 8 Report No.: STS2512456H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Safewave Band Brand Name N/A Model Name Safewave Band Series Model(s) N/A Model Difference N/A Product Description The EUT is a Safewave Band Operation Frequency: 2402~2480 MHz Modulation Type: GFSK Antenna gain: 3.91 dBi Antenna Designation: Internal Antenna Power Rating DC 3.7V From Battery, DC 5V From Charger Adapter N/A Battery DC 3.7V Hardware Version N/A Software Version N/A 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 8 Report No.: STS2512456H01 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in KDB 447498 D01 General RF Exposure Guidance v06 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. Page 7 of 8 Report No.: STS2512456H01 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] • [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz. Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Page 8 of 8 Report No.: STS2512456H01 2.3 TEST RESULT Maximum measured transmitter power. Worst Case Mode frequency Maximum Output Power Tune up tolerance Max Tune up GHz dBm dBm dBm GFSK 2.440 -0.25 0±1 1 Evaluation Result Mode Frequency Antenna Distance RF output power including tune up (dBm) SAR Test Exclusion Threshold SAR Test Exclusion Estimated SAR GHz mm dBm mw GFSK 2.440 5 1 1.26 0.39 Yes / Note: 1. Remark: The worst case gain of the antenna is 0dBi. 2. Threshold at which no SAR required is 0.39≤ 3.0 for 1-g SAR, Separation distance ≤ 5mm. ※※※※※END OF THE REPORT※※※※※

Report No.: BL-SZ25C1289-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 1 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China TEST REPORT Applicant: Safewave Technology Corporation Address: 2 W Pike St. Unit 3 Covington, KY 41011, USA Equipment Type: Safewave Band Model Name: Safewave Band Brand Name: N/A Test Standard: IEEE Std 149-2021 Sample Arrival Date: Dec. 19, 2025 Test Date: Dec. 24, 2025 Date of Issue: Jan. 26, 2026 ISSUED BY: Shenzhen BALUN Technology Co., Ltd. Tested by: Mai Jintian Checked by: Xia Long Approved by: Tolan Tu (Technical Director) _______________ _______________ _______________ Report No.: BL-SZ25C1289-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 2 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China Revision History Version Issue Date Revisions Rev. 01 Jan. 26, 2026 Initial Issue TABLE OF CONTENTS 1 GENERAL INFORMATION ........................................................................................................ 3 1.1 Test Laboratory .................................................................................................................. 3 1.2 Test Location ...................................................................................................................... 3 2 PRODUCT INFORMATION ....................................................................................................... 4 2.1 Applicant Information .......................................................................................................... 4 2.2 Manufacturer Information .................................................................................................... 4 2.3 General Description for Equipment under Test (EUT) ......................................................... 4 2.4 Ancillary Equipment ............................................................................................................ 4 3 SUMMARY OF TEST RESULTS ............................................................................................... 5 3.1 Test Standards ................................................................................................................... 5 3.2 Test Verdict ........................................................................................................................ 5 3.3 Test Uncertainty ................................................................................................................. 5 4 GENERAL TEST CONFIGURATIONS ...................................................................................... 6 4.1 Test Condition .................................................................................................................... 6 4.2 Test Equipment List ............................................................................................................ 6 4.3 Test Setup .......................................................................................................................... 7 4.4 Test Frequencies ................................................................................................................ 7 ANNEX A TEST RESULTS .......................................................................................................... 8 A.1 Gain and Efficiency ............................................................................................................. 8 A.2 VSWR ................................................................................................................................. 8 ANNEX B RADIATION PATTERN ............................................................................................... 9 ANNEX C TEST SETUP PHOTOS ............................................................................................ 12 ANNEX D EUT PHOTO.............................................................................................................. 12 Report No.: BL-SZ25C1289-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 3 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1 GENERAL INFORMATION 1.1 Test Laboratory Name Shenzhen BALUN Technology Co., Ltd. Address Building 2, Intelligent Connected Vehicle Industrial Park, No. 55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen, Guangdong Province, China Phone Number +86 755 6685 0100 1.2 Test Location Name Shenzhen BALUN Technology Co., Ltd. Location Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 1/F, Building B, Ganghongji High-tech Intelligent Industrial Park, No. 1008, Songbai Road, Yangguang Community, Xili Sub-district, Nanshan District, Shenzhen, Guangdong Province, P. R. China Building 2, Intelligent Connected Vehicle Industrial Park, No. 55, Xiangshan Road, Luotian Community, Yanluo Sub-district, Bao'an District, Shenzhen, Guangdong Province, China Report No.: BL-SZ25C1289-901 Tel: +86-755-66850100 E-mail: [email protected] Page No. 4 / 13 Web: www.titcgroup.com Template No.: TRP-Passive-EN (2022-09-07) Add: Block B, 1/F, Baisha Science and Technology Park, Shahe Xi Road, Nanshan District, Shenzhen, Guangdong Province, P. R. China 2 PRODUCT INFORMATION 2.1 Applicant Information Applicant Safewave Technology Corporation Address 2 W Pike St. Unit 3 Covington, KY 41011, USA Contact Person Jared Gabbard Telephone Number 513-304-1186 E-mail Address [email protected] 2.2 Manufacturer Information Manufacturer N/A Address N/A 2.3 General Description for Equipment under Test (EUT) EUT Name Safewave Ba…

Text truncated - open the document above for the full version.

Report No.: BL-SZ25C1289-AA 1 / 1 EUT PHOTO --BLANK BELOW-- Antenna

Report No.: BL-SZ25C1289-AO 1 / 3 TEST SETUP PHOTOS Report No.: BL-SZ25C1289-AO 2 / 3 Report No.: BL-SZ25C1289-AO 3 / 3 --BLANK BELOW--

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2512456W01 Issued for Safewave Technology Corporation 2 W Pike St. Unit 3 Covington, KY 41011, USA Product Name: Safewave Band Brand Name: N/A Model Name: Safewave Band Series Model(s): N/A FCC ID: 2BTVL-SAFEWAVEBAND Test Standards: FCC Part15.247 Page 2 of 70 Report No.: STS2512456W01 TEST REPORT Applicant’s Name ................. : Safewave Technology Corporation Address ................................. : 2 W Pike St. Unit 3 Covington, KY 41011, USA Manufacturer's Name .......... : Safewave Technology Corporation Address ................................. : 2 W Pike St. Unit 3 Covington, KY 41011, USA Product Description Product Name ....................... : Safewave Band Brand Name .......................... : N/A Model Name .......................... : ... : Safewave Band Series Model(s) .................... : N/A Test Standards ..................... : FCC Part15.247 Test Procedure ...................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the IC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ..................... : 19 Dec. 2025 Date (s) of performance of tests ............. : 19 Dec. 2025 to 13 Jan. 2026 Date of Issue .......................................... : 14 Jan. 2026 Test Result.............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 70 Report No.: STS2512456W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 RF RADIATION TEST EQUIPMENT 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 15 4. RADIATED EMISSION MEASUREMENT 17 4.1 RADIATED EMISSION LIMITS 17 4.2 TEST PROCEDURE 19 4.3 TEST SETUP 20 4.4 EUT OPERATING CONDITIONS 20 4.5 FIELD STRENGTH CALCULATION 21 4.6 TEST RESULTS 22 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 37 5.1 LIMIT 37 5.2 TEST PROCEDURE 37 5.3 TEST SETUP 37 5.4 EUT OPERATION CONDITIONS 37 5.5 TEST RESULTS 37 6. POWER SPECTRAL DENSITY TEST 38 6.1 LIMIT 38 6.2 TEST PROCEDURE 38 Page 4 of 70 Report No.: STS2512456W01 Table of Contents Page 6.3 TEST SETUP 38 6.4 EUT OPERATION CONDITIONS 38 6.5 TEST RESULTS 38 7. BANDWIDTH TEST 39 7.1 LIMIT 39 7.2 TEST PROCEDURE 39 7.3 TEST SETUP 39 7.4 EUT OPERATION CONDITIONS 39 7.5 TEST RESULTS 39 8. PEAK OUTPUT POWER TEST 40 8.1 LIMIT 40 8.2 TEST PROCEDURE 40 8.3 TEST SETUP 40 8.4 EUT OPERATION CONDITIONS 40 8.5 TEST RESULTS 40 9. ANTENNA REQUIREMENT 41 9.1 STANDARD REQUIREMENT 41 9.2 EUT ANTENNA 41 APPENDIX 1-TEST DATA 42 APPENDIX 2- EUT TEST PHOTO 70 Page 5 of 70 Report No.: STS2512456W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 14 Jan. 2026 STS2512456W01 ALL Initial Issue Page 6 of 70 Report No.: STS2512456W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 70 Report No.: STS2512456W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 70 Report No.: STS2512456W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Safewave Band Brand Name N/A Model Name Safewave Band Series Model(s) N/A Model Difference N/A Product Description The EUT is a Safewave Band Operation Frequency: 2402~2480 MHz Modulation Type: GFSK Radio Technology: BLE Bluetooth Configuration: 5.0 Number Of Channel: 40 Antenna Type: Internal Antenna Antenna Gain (dBi) 3.91 Channel List Please refer to the Note 3. Power…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID:2BTVL-SAFEWAVEBAND Conducted emissions 30MHz-1GHz Page 2 of 2 FCC ID:2BTVL-SAFEWAVEBAND Spurious emissions