
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
Customer Service Hotline: +1 844 200 7117 (U.S.) Working hours: 9:00 a.m. ‒ 6:00 p.m. (GMT+1), Monday to Friday Official Website: https://engwe-bikes.com/ If you have any questions or suggestions regarding this user manual, please contact us at: Email: [email protected] Assembly videoAPP Download Before you enjoy your ride, please read this user manual carefully. M20 3.0 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body FCC STATEMENT FCC STATEMENT FCC STATEMENT IMPORTANT SAFETY INSTRUCTIONS DANGER: Ignoring this notice may result in serious injury or death. Follow all required instructions. WARNING: Ignoring this warning may cause damage to the vehicle or its components. Follow all required instructions. CAUTION: Ignoring this caution may result in minor damage or reduced performance. Follow the recommended instructions. Please read and follow all safety instructions in this manual. When riding in public areas, obey all national and local traffic laws, stay alert, and maintain a safe distance from pedestrians and vehicles. Read all the instructions before using the product. Do not modify or unlock the speed limit without authorization. Any damage caused by improper or unauthorized operation is the user's responsibility. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not put fingers or hands into the product. Do not use this product if the flexible power cord or output cable is frayed, has broken insulation, or any other signs of damage. This product is not designed for professional off-road or stunt riding. Do not ride up or down stairs, jump, perform wheelies, or attempt similar actions. For your first ride, practice in a safe, traffic-free area. Only ride on public roads after becoming fully familiar with the product. Before each ride, check for loose fasteners or damaged parts. If you hear abnormal sounds or notice damaged cables or insulation, stop riding immediately and contact our service team. Do not ride at excessive speed. When riding on public roads, always obey local traffic regulations and keep a safe distance from motor vehicles. For safety reasons, this product must not be used by persons under 14 years old. Do not ride if you are under the influence of alcohol or drugs, have medical conditions that limit physical activity, cannot maintain balance, exceed the maximum load limit, or are pregnant. Use extra caution when riding in rain, snow, on wet, icy, or slippery surfaces, or in any other adverse conditions. Do not charge the product if the charger or power outlet is wet. When charging in public places, comply with local safety regulations. Only use manufacturer-approved parts and accessories to ensure proper performance and safety. Do not modify the product without consulting our service team and ensuring compliance with local laws. The manufacturer is not responsible for any injury or damage caused by unauthorized modifications. Follow all “Caution,” “Danger,” and “Warning” notices in this manual to reduce the risk of injury. The battery is intended to be charged when the ambient temperature is between 0°C(32°F)and 40°C(104°F)Never charge the battery when ambient temperatures are outside this range. This equipment is not intended to be used at ambient temperatures less than 0°C(32°F)or above ambient temperatures of 40°C(104°F) SAVE THESE INSTRUCTIONS WARNING When using this product, basic safety precautions should always be followed: CONTENTS 4. Service guide3. USER MAINTENANCE INSTRUCTIONS 4.1 After-sales service and warranty coverage 4.2 Warranty card and repair record 4.3 Product parameters 3.1 Notes for operation 3.2 Maintenance and self-inspection 3.3 Troubleshooting 2.1 INSTALLATION INSTRUCTIONS 2.2 BATTERY REMOVAL & INSTALLATION 2.3 How to charge 2.4 Quick Operating Instructions 1.1 Packing list 1.2 Components 1.3 Functions 1.4 Display Functions QUICK GUIDE 1.Product Introduction Assembly videoAPP Download 1.1 Packing list 1.Product Introduction Tank BagSeatHeadlight User ManualHex Wrench M4M2.5M5M6M8 PedalsReflector Bracket ReflectorFront Axle Frame body Front Fender Front Wheel Screw KitScrewdriverWrench 8-1013-1515-17 ChargerPump Package Contents Rear Fo…
Text truncated - open the document above for the full version.
COMPANYLETTERHEAD CoveredEquipmentCertificationAttestationLetter 3/25/2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA ATTN.:ReviewingEngineer FCCID:2BU5R-M2030DB ShenzhenZhiquVehicleIndustryCo.,Ltdcertifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedby anyoftheentitiesidentifiedonthecurrentCoveredList,theapplicantshould includeanexplanationonwhytheequipmentisnot“covered”equipment. ShenzhenZhiquVehicleIndustryCo.,Ltdcertifiesthat,asofthedateofthefilingofthe application,theapplicantisnotidentifiedontheCoveredList(asaspecificallynamed entityoranyofitssubsidiariesoraffiliates)asanentityproducing“covered”equipment. ShenzhenZhiquVehicleIndustryCo.,Ltdcertifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedor providedbyKasperskyLab,Inc.oranyofitssuccessorsandassignees,including equipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsandassignees) cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446D01 CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:JianBaiHe Title: CertifiedEngineer CompanyName:ShenzhenZhiquVehicleIndustryCo.,Ltd Date:3/25/2026
* the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. SC6036454 U.S. Agent Designation for Service of Process - Certification Attestation Letter 4/9/2026 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2BU5R-M2030DB FRN of applicant: 0038131561 Per section 2.911(d)(7) of the FCC rules, Shenzhen Zhiqu Vehicle Industry Co., Ltd FRN: 0038131561(“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Global Product Services and Consultation LLC FCC Registration Number (FRN): 0033406703 Physical U.S. Company Address: 328 W Palm Ave. Monrovia, CA91016 Contact Person: Michael Chan Tel: +1 626 366 4358 Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different from Applicant): Signed: Printed name: JianBai He Title: Certified Engineer Company Name: Shenzhen Zhiqu Vehicle Industry Co., Ltd Date: 3/25/2026 Signed: Printed name: Michael Chan Title: Technical Director Company Name: Global Product Services and Consultation LLC Date: 4/9/2026
Date:2026.3.25 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeComplianceTesting,LLCtoactonourbehalfinallmatters relatingtoapplicationforequipmentauthorization,includingthesigningofalldocumentsrelatingto thesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothedenialof benefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.853(a). Sincerely, <Signature> Name :JianBaiHe Title :CertifiedEngineer Company :ShenzhenZhiquVehicleIndustryCo.,Ltd
DATE:2026.3.25 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 AuthoritytoActasAgent Onourbehalf,IappointShenzhenVOPTestingTechnologyCo.,Ltd.103,Building5, WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen, GuangdongPeople'sRepublicofChinatoactasouragentinthepreparationofthis applicationforequipmentcertification.Icertifythatsubmitteddocumentsproperlydescribe thedeviceorsystemforwhichequipmentcertificationissought.Ialsocertifythateach unitmanufactured,importedormarketed,asdefinedintheFederalCommunications Commission’sregulationswillhaveaffixedtoitalabelidenticaltothatsubmittedfor approvalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonour behalf,Iacknowledgethatallresponsibilityforcomplyingwiththetermsandconditions forcertification,stillresideswithShenzhenZhiquVehicleIndustryCo.,Ltd.1001,Building B,No.7HuanpingRoad,CentralCommunity,PingdiStreet,LonggangDistrict,Shenzhen <Signature> Name:JianBaiHe Title: CertifiedEngineer ApplicantCompany:ShenzhenZhiquVehicleIndustryCo.,Ltd
DATE:2026.3.25 EquipmentAutorisationDivision FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 FCCID:2BU5R-M2030DB ProductName:EPACBicycle RequestforConfidentiality PursuanttoSections0.457and0.459ofthecommission’srules,weherebyrequestthat thefollowingdocumentsbeheldconfidential: (Listherethedocumentsforwhichyouareseekingconfidentiality–forexample...) Schematics Blockdiagram Operationdescription Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoourcompetitors. <Signature> Name: JianBaiHe Title:CertifiedEngineer Company:ShenzhenZhiquVehicleIndustryCo.,Ltd
EUTExternalphotos
FCCID:2BU5R-M2030DB Thisdevicecomplieswithpart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference,and (2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesiredoperation. 38mm 50mm
EUTInternalphotos
Page1of9ReportNo.:VOP20260304008ER2-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] FCCTestReport Applicant’sname:ShenzhenZhiquVehicleIndustryCo.,Ltd Address: 1001,BuildingB,No.7HuanpingRoad,CentralCommunity,PingdiStreet, LonggangDistrict,Shenzhen Manufacture'sName:ShenzhenZhiquVehicleIndustryCo.,Ltd Address: 1001,BuildingB,No.7HuanpingRoad,CentralCommunity,PingdiStreet, LonggangDistrict,Shenzhen Productdescription Tradermark:ENGWE ProductName::EPACBicycle Modeland/ortypereference:M203.0DB SerialModel:M203.0 Rating(s):DC60V,40A Standards: FCC47CFR§2.1091 447498D01GeneralRFExposureGuidancev06 TheEUTdescribedabovehasbeentestedbyuswiththelistedstandardsandfoundincompliancewiththeFCC requirements.ItispossibletouseFCCmarkingtodemonstratethecompliancewiththisFCCrequirements. Note:Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongastheShenzhen VOPTestingTechnologyCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.ShenzhenVOP TestingTechnologyCo.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthe reader'sinterpretationofthereproducedmaterialduetoitsplacementandcontext. DateofTest Date(s)ofperformanceoftests:2026-03-05~2026-04-14 DateofIssue:2026-04-14 TestResult:Pass Preparedby: ProjectEngineer Reviewedby: ProjectSupervisor Approvedby: TechnicalDirector $5*1&V $5*1&V Page2of9ReportNo.:VOP20260304008ER2-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] REPORTREVISERECORD ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/2026-04-14ValidInitialRelease Page3of9ReportNo.:VOP20260304008ER2-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] Contents Contents..........................................................................................................................................................................3 1.TESTSUMMARY........................................................................................................................................................4 2.TESTFACILITY...........................................................................................................................................................4 2.1.DeviationfromStandard...................................................................................................................................4 2.2.AbnormalitiesfromStandardConditions..........................................................................................................4 3.GENERALINFORMATION.........................................................................................................................................5 3.1.GeneralDescriptionofEUT..............................................................................................................................5 4.TESTRESULTS..........................................................................................................................................................6 4.1.Radiofrequencyradiationexposureevaluation:mobiledevices......................................................................6 4.1.1.Conclusion:.............................................................................................................................................9 Page4of9ReportNo.:VOP20260304008ER2-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 1.TESTSUMMARY No.TestItemBasicStandardResult 1 Radiofrequencyradiationexposure evaluation:mobiledevices FCC47CFR§2.1091 PASS 2.TESTFACILITY ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,Guangdong People'sRepublicofChina FCC:DesignationNumber:CN1438,CertificateNumber:7579.01 2.1.DeviationfromStandard None 2.2.AbnormalitiesfromStandardConditions None Page5of9ReportNo.:VOP20260304008ER2-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 3.GENERALINFORMATION 3.1.GeneralDescriptionofEUT Manufacturer:ShenzhenZhiquVehicleIndustryCo.,Ltd ManufacturerAddress: 1001,BuildingB,No.7HuanpingRoad,CentralCommunity,PingdiStreet,Longgang District,Shenzhen EUTName:EPACBicycle ModelNo:M203.0DB SerialModel:M203.0 FCCID:2BU5R-M2030DB BrandName:ENGWE DifferenceDescription:Allmodelsareidenticaltoeachotherexceptformodelnameandappearance. Page6of9ReportNo.:VOP20260304008ER2-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 4.TESTRESULTS 4.1.Radiofrequencyradiationexposureevaluation:mobiledevices TestRequirement:47CFRPart2.1091 TestLimit: Blanket1mWBlanketExemption The1mWBlanketExemptionof§1.1307(b)(3)(i)(A)appliesforsinglefixed,mobile,and portableRFsourceswithavailablemaximumtime-averagedpowerofnomorethan1 mW,regardlessofseparationdistance. The1-mWblanketexemptionappliesatseparationdistanceslessthan0.5cm,including wherethereisnoseparation.Thisexemptionshallnotbeusedinconjunctionwithother exemptioncriteriaotherthanthoseformultipleRFsourcesinparagraph §1.1307(b)(3)(ii)(A). The1-mWexemptionisindependentofservicetypeandcoversthefullran…
Text truncated - open the document above for the full version.
Page1of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] RadioTestReport 47CFRPart15.247 Applicant’sname:ShenzhenZhiquVehicleIndustryCo.,Ltd Address: 1001,BuildingB,No.7HuanpingRoad,CentralCommunity,PingdiStreet, LonggangDistrict,Shenzhen Manufacture'sName:ShenzhenZhiquVehicleIndustryCo.,Ltd Address: 1001,BuildingB,No.7HuanpingRoad,CentralCommunity,PingdiStreet, LonggangDistrict,Shenzhen Productdescription Tradermark:ENGWE ProductName::EPACBicycle Modeland/ortypereference:M203.0DB SerialModel:M203.0 Rating(s):DC60V,40A FCCID:2BU5R-M2030DB TheEUTdescribedabovehasbeentestedbyuswiththelistedstandardsandfoundincompliancewiththeFCC requirements.ItispossibletouseFCCmarkingtodemonstratethecompliancewiththisFCCrequirements. Note:Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongastheShenzhen VOPTestingTechnologyCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.ShenzhenVOP TestingTechnologyCo.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthe reader'sinterpretationofthereproducedmaterialduetoitsplacementandcontext. DateofTest Date(s)ofperformanceoftests:2026-03-05~2026-04-14 DateofIssue:2026-04-14 TestResult:Pass Preparedby: ProjectEngineer Reviewedby: ProjectSupervisor Approvedby: TechnicalDirector $5*1&V Page2of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] REPORTREVISERECORD ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/2026-04-14ValidInitialRelease Page3of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] Contents Contents..........................................................................................................................................................................3 1.TESTSUMMARY........................................................................................................................................................5 2.MEASUREMENTUNCERTAINTY..............................................................................................................................5 3.TESTFACILITY...........................................................................................................................................................6 3.1.DeviationfromStandard...................................................................................................................................6 3.2.AbnormalitiesfromStandardConditions..........................................................................................................6 4.GENERALINFORMATION.........................................................................................................................................7 4.1.GeneralDescriptionofEUT..............................................................................................................................7 4.2.EUTTestMode.................................................................................................................................................8 4.3.AuxiliaryEquipmentUsedDuringTest.............................................................................................................8 5.EQUIPMENTSLISTFORALLTESTITEMS..............................................................................................................9 6.TESTRESULTS........................................................................................................................................................11 6.1.Antennarequirement.......................................................................................................................................11 6.1.1.Conclusion:...........................................................................................................................................11 6.2.ConductedEmissionatACpowerline...........................................................................................................12 6.2.1.EUTOperation......................................................................................................................................12 6.2.2.TestSetupDiagram:.............................................................................................................................12 6.2.3.TestData...............................................................................................................................................13 6.3.6dBBandwidth................................................................................................................................................15 6.3.1.EUTOperation......................................................................................................................................15 6.3.2.TestSetupDiagram:.............................................................................................................................15 6.3.3.TestData...............................................................................................................................................16 6.4.MaximumConductedOutputPower...............................................................................................................17 6.4.1.EUTOperation......................................................................................................................................17 6.4.2.TestSetupDiagram:.......................................................................…
Text truncated - open the document above for the full version.
Page51of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] Page52of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] EUTInternalphotos Page53of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] Page54of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] Page55of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 9.AppendixReport 1.DutyCycle 1.1TestResult 1.1.1Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) DutyCycle (%) DutyCycle CorrectionFactor(dB) Max.DC Variation(%) 1MSISO 24020.0980.62515.688.050.03 24400.0980.62515.688.050.03 24800.0970.62515.528.090.03 Page56of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 1.2TestGraph 1.2.1Ant1 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page57of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 1M_HCH_2480MHz_Ant1_NTNV Page58of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 2.Bandwidth 2.1TestResult 2.1.1OBW Mode TX Type Frequency (MHz) ANT 99%OccupiedBandwidth(MHz) Verdict ResultLimit 1MSISO 240211.025/Pass 244011.024/Pass 248011.026/Pass 2.1.26dBBW Mode TX Type Frequency (MHz) ANT 6dBBandwidth(MHz) Verdict ResultLimit 1MSISO 240210.506>=0.5Pass 244010.505>=0.5Pass 248010.508>=0.5Pass Page59of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 2.2TestGraph 2.2.1OBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page60of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 1M_HCH_2480MHz_Ant1_NTNV Page61of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 2.2.26dBBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page62of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 1M_HCH_2480MHz_Ant1_NTNV Page63of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 3.MaximumConductedOutputPower 3.1TestResult 3.1.1Power Mode TX Type Frequency (MHz) MaximumPeakConductedOutputPower(dBm) Verdict ANT1Limit 1MSISO 2402-1.90<=30Pass 2440-1.86<=30Pass 2480-2.17<=30Pass Note1:AntennaGain:Ant1:-0.51dBi; Page64of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 3.2TestGraph 3.2.1Power 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page65of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 1M_HCH_2480MHz_Ant1_NTNV Page66of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 4.MaximumPowerSpectralDensity 4.1TestResult 4.1.1PSD Mode TX Type Frequency (MHz) MaximumPSD(dBm) Verdict ANT1Limit 1MSISO 2402-29.35<=8Pass 2440-29.84<=8Pass 2480-30.25<=8Pass Note1:AntennaGain:Ant1:-0.51dBi; Page67of80ReportNo.:VOP20260304008ER1-R02 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 4.2TestGraph 4.2.1PSD 1M_LCH_2402MHz_…
Text truncated - open the document above for the full version.
Summary MeanderedPCBAntennaSpecification ITEMANTSPEC ModelName2.4GANT Center Frequency HorizontalVertical 2400MHz2400MHz2500MHz2400MHz2400MHz2500MH…
Text truncated - open the document above for the full version.
328 W Palm Ave. · Monrovia, California, 91016 · United States
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.40 GHz - 2.48 GHz | 650.00 µW |

EPAC Bicycle
Equipment Class
PCB - PCS Licensed Transmitter
EPAC Bicycle
Equipment Class
PCB - PCS Licensed Transmitter