2BUNJ-M1-5000Power bank

Shenzhen Xianyang Innovation Technology Co., Ltd. 2.911(d)(7)USAAgentv1.4 Section 2.911(d) (7) USA Agent for Service of Process Company name: Shenzhen Xianyang Innovation Technology Co., Ltd. Address:Rm 302, Bldg. 8, Yunli intelligent park, No. 7, Changfa Middle Rd, Bantian st., Longgang Dist., Shenzhen, China Product Name:Power bank FCC ID:2BUNJ-M1-5000 Model(s): M1-5000 2.911(d) (7) USA Designated Agent for Service of Process We, [Shenzhen Xianyang Innovation Technology Co., Ltd.] (“the applicant”) designate [ CELLT INC.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent:We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process inthe United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S.,orthe conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation:We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the granteehas permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: CELLT INC. Address: 1401 21ST ST # 12958 SACRAMENTO, CA 95811, USA Applicant Company name: Shenzhen Xianyang Innovation Technology Co., Ltd. Address:Rm 302, Bldg. 8, Yunli intelligent park, No. 7, Changfa Middle Rd, Bantian st., Longgang Dist., Shenzhen, China Shenzhen Xianyang Innovation Technology Co., Ltd. 2.911(d)(7)USAAgentv1.4 FRN: 0036412567 Contact Name: Thompson Lim Telephone No: 001-424-3474188 Email: [email protected] FRN: 0038615746 FCC Grantee Code:2BUNJ Contact Name: Dianming Shen Telephone No: 18165740680 Email: [email protected] Signature: Title: General Manager Signature: Title: Manager Date: 2026.07.28Date:2026.07.28 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Rev1/26/2023 ShenzhenXianyangInnovationTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:07-22-2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2BUNJ-M1-5000 (“ShenzhenXianyangInnovationTechnologyCo.,Ltd.”)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuanttosection2.903oftheFCCrules. (“ShenzhenXianyangInnovationTechnologyCo.,Ltd.”)certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedby KasperskyLab,Inc.oranyofitssuccessorsandassignees,includingequipmentwithintegratedKaspersky Lab,Inc.(oranyofitssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24- 886andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature)DianmingShen (Applicantprintedname) Rev1/26/2023 ShenzhenXianyangInnovationTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:07-22-2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2BUNJ-M1-5000 (“ShenzhenXianyangInnovationTechnologyCo.,Ltd.”)certifiesthat,asofthedateofthefilingofthe application,ShenzhenXianyangInnovationTechnologyCo.,Ltd.isnotidentifiedontheCoveredList(asa specificallynamedentityoranyofitssubsidiariesoraffiliates)asanentityproducing“covered” equipment. Sincerely, (Applicantsignature) (Applicantprintedname)DianmingShen

ShenzhenXianyangInnovationTechnologyCo.,Ltd. Date ： 07-22-2026 FCCID:2BUNJ-M1-5000 Product/ModelNumber:Powerbank/M1-5000 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By:DianmingShen ContactListedonFCCWesbite Title:Manager Email:[email protected] Telephone:18165740680 Onbehalfof:ShenzhenXianyangInnovationTechnologyCo.,Ltd.

ShenzhenXianyangInnovationTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:July22,2026 Subject;RequestforConfidentiality FCCID:2BUNJ-M1-5000 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:DianmingShen Title:Manager

Label: FCCID:2BUNJ-M1-5000 BatteryCapacity:5000mAh,3.7V,18.5Wh RatedCapacity:3000mAh(5V⎓3A) Wirelessoutput:5W/7.5W/10W/15W USB-CInput:5V⎓3A,9V⎓2.22A,12V⎓1.67A(20WMax) USB-COutput:5V⎓3A,9V⎓2.22A,12V⎓1.67A(20WMax) PogopinInput:5V⎓3A,9V⎓2A PogopinOutput:5V⎓3A,9V⎓2A TotalOutput:5V⎓3A 50mm 35mm

MPE REPORT power bank MODEL No.: M1-5000 FCC ID: 2BUNJ-M1-5000 REPORT NO.:SZNTT26019561E1-2 ISSUE DATE: May. 29, 2026 Preparedfor Shenzhen Xianyang Innovation Technology Co., Ltd. Rm 302, Bldg. 8, Yunli intelligent park, No. 7, Changfa Middle Rd, Bantian st., Longgang Dist., Shenzhen, China Preparedby Shenzhen NTT Testing Technology Co., Ltd. A101&2F B2, Fuqiao 6th Area, Xintian Community, Fuhai Street, Baoan District, Shenzhen, China TEL: 0755-27889935 Report No.: SZNTT26015335E1-2 SZNTT-TR825-0Page 2 of 18 Hotline:0755-27889935http://www.ntt-testing.com TABLE OF CONTENT Page 1. SUMMARY OF TEST RESULT.....................................................................................................4 2. GENERAL INFORMATION............................................................................................................5 2.1. DESCRIPTION OFDEVICE(EUT).................................................................................................................................5 2.2. T ESTSETUP.................................................................................................................................................................6 2.3. D ESCRIPTION OFTESTFACILITY.................................................................................................................................7 2.4. M EASUREMENTUNCERTAINTY....................................................................................................................................7 3. MEASURING DEVICE AND TEST EQUIPMENT......................................................................8 3.1. FORMPE MEASUREMENT.......................................................................................................................................... 8 4. RF EXPOSURE................................................................................................................................9 4.1. MEASURINGSTANDARD...............................................................................................................................................9 4.2. R EQUIMENTS................................................................................................................................................................9 4.3. T EST CONFIGURATION............................................................................................................................................... 10 4.4. L IMITS.........................................................................................................................................................................11 4.5. T ESTMODES:.............................................................................................................................................................12 4.6. D ESCRIPTION OFSUPPORTUNIT..............................................................................................................................12 4.7. M EASURINGRESULTS............................................................................................................................................... 13 5. PHOTOGRAPHS OF TEST SETUP...........................................................................................18 Report No.: SZNTT26015335E1-2 SZNTT-TR825-0Page 3 of 18 Hotline:0755-27889935http://www.ntt-testing.com TEST REPORT DESCRIPTION Applicant: Shenzhen Xianyang Innovation Technology Co., Ltd. Address: Rm 302, Bldg. 8, Yunli intelligent park, No. 7, Changfa Middle Rd, Bantian st., Longgang Dist., Shenzhen, China Manufacturer: Shenzhen Xianyang Innovation Technology Co., Ltd. Address: Rm 302, Bldg. 8, Yunli intelligent park, No. 7, Changfa Middle Rd, Bantian st., Longgang Dist., Shenzhen, China EUT: power bank Model Name: M1-5000 Trademark: RORRY Measurement Procedure Used: FCC Part 1(1.1310) and Part 2(2.1091)&Part 2(2.1093) KDB 680106 D01 Wireless Power Transfer v04 The device described above is tested by Shenzhen NTT Testing Technology Co., Ltd. to determine the maximum emission levels emanating from the device and the severe levels of the device can endure and its performance criterion. The measurement results are contained in this test report and Shenzhen NTT Testing Technology Co., Ltd. is assumed full of responsibility for the accuracy and completeness of these measurements. Also, this report shows that the EUT (Equipment Under Test) is technically compliant with the FCC requirements. This report applies to above tested sample only and shall not be reproducedin part without written approval of Shenzhen NTT Testing Technology Co., Ltd. Prepared by(Test Engineer): Cindy Qin Reviewer(Supervisor): Ken Wu Approved(Manager): Abel Yu Report No.: SZNTT26015335E1-2 SZNTT-TR825-0Page 4 of 18 Hotline:0755-27889935http://www.ntt-testing.com 1. SUMMARY OF TEST RESULT EMISSION Description of Test ItemStandard & LimitsResults MPE FCC Part 1(1.1310) and Part 2(2.1091) and Part 2(2.1093) KDB 680106 D01 Wireless Power Transfer v04 Pass Note: N/A is an abbreviation for Not Applicable. Report No.: SZNTT26015335E1-2 SZNTT-TR825-0Page 5 of 18 Hotline:0755-27889935http://www.ntt-testing.com 2. GENERAL INFORMATION 2.1.Description of Device (EUT) EUT: power bank Model Number: M1-5000 Difference: N/A Power Rating: Battery Capacity: 5000mAh, 3.7V, 18.5Wh Rated Capacity: 3000mAh(5V⎓3A) Wireless output: 5W/7.5W/10W/15W USB-C Input: 5V⎓3A, 9V⎓2.22A, 12V⎓1.67A (20W Max) USB-C Output: 5V⎓3A, 9V⎓2.22A, 12V⎓1.67A (20W Max) Pogo pin Input: 5V⎓3A, 9V⎓2A Pogo pin Output: 5V⎓3A, 9V⎓2A Total Output: 5V⎓3A Operation Frequency for WPT : 111-205kHz Modulation: MSK Antenna Type:: Coil Antenna Date of Received : May. 06, 2026 Date of Test: May. 07, 2026 to May. 25, 2026 Report No.: SZNTT26015335E1-2 SZNTT-TR825-0Page 6 of 18 Hotline:0755-27889935http://www.ntt-testing.com 2.2.Test Setup For mobile exposure conditions: For portable exposure conditions: Notes: The EHP 200A Probe has a diameter of 10.9cm and a radius of 5.45cm Report No.: SZN…

Text truncated - open the document above for the full version.

Acknowledgement CustomerName:Xingyuansheng Customer MaterialNumber:A11Coil OurCompany Model: G43-1.0-6.7UH-33MM Sample SubmissionDate:December7,2023 supplier:DongguanJierisiTechnologyCo.,Ltd. Draw ExamineandverifyRatify LuLin DengXiangguiLuRusheng Thecustomeracknowledges: Qualified Unqualified Admit Remarks DongguanJierisiTechnologyCo.,Ltd. Tel: Fax:86+13632701380 Address:3rdFloor,BuildingL,JinxiundaSciencePark,No.96LanghuRoad,DalingMountainTown,Dongguan CustomerNameCustomerMaterialNumberOurCompanyModel Edition Date Xingyuansheng G43-1.0-6.7UH-33MM A0 2023.12.07 II.ProductParameters: Footposition LineRadiusNumberofturnsRemarks 1-20.07*100P10 Silk-coveredwire III.TechnicalRequirements: 1.Securebothendsofthewiretopreventlooseningorbreakage. 2．Cutexcessivelylongwireendsaspercustomerrequirements,tinthem,andensureauniformtincoating depthof3±1mm. 3．Applyanappropriateamountofwhiteadhesiveontothesoftmagneticsheet,thenattachthecoil;ensure theproductsurfaceremainscleanandtidythroughouttheprocess. 4.Thesoftmagneticsheetsusedareperforatedwithcircularholesandfreefromdamage. A B C D E F G H I 1 I.PlanStructureDiagram:Unit:MM 2 1 2 J K L IV.ElectricalParameters: 1.InductanceValue,QValue: PIN1—2=6.7uH±0.3UH ForQvalues≥40,measuretheinductanceusingtheQuanHua1062A instrumentat10kHz/0.3Vrmsoranequivalentdevice. TheQvalueismeasuredusingtheQuanHua1062Ainstrument,witha referenceof100kHz/0.3Vrmsoranequivalentinstrument. V.ListofMaterials: Order number NameMaterialqualitySupplier Remarks 1 Silk-coveredwire 0.07*100P Wuhanorequivalent 2 Magneticsheet G43HardMatrix 3 TinHigh-performanceenvironmentalprotection TheThousandIslandsmaybe equivalent. 4 WhiteGlue BY882 Baoyueorequivalent 5 Doublefacedadhesivetape Diameter42mm Honghuiorequivalent 6 High-strengthadhesivetape 5MM

FCC PART 15 SUBPART C power bank MODEL No.: M1-5000 FCC ID: 2BUNJ-M1-5000 REPORT NO.: SZNTT26019561E1-1 ISSUE DATE: May. 29, 2026 Preparedfor Shenzhen Xianyang Innovation Technology Co., Ltd. Rm 302, Bldg. 8, Yunli intelligent park, No. 7, Changfa Middle Rd, Bantian st., Longgang Dist., Shenzhen, China Preparedby Shenzhen NTT Testing Technology Co., Ltd. 1B, Building 2, Factory Building & 103, Building 3, Factory Building, Dayang Industrial Park No.4, Industrial Avenue, Tangwei Community, Fuhai Sub-district, Bao 'an District, Shenzhen City, China TEL: 0755-27889935 Report No.: SZNTT26019561E1-1 SZNTT-TR825-0Page 2 of 25 Hotline:0755-27889935http://www.ntt-testing.com TABLE OF CONTENT Test Report DescriptionPage 1. SUMMARY OF TEST RESULTS............................................................................................................................5 2. GENERAL INFORMATION....................................................................................................................................6 2.1. Description of Device (EUT)............................................................................................................................ 6 2.2. Description of Support Units............................................................................................................................6 2.3. Test Mode........................................................................................................................................................ 7 2.4. Description of Test Facility............................................................................................................................... 7 2.5. Measurement Uncertainty................................................................................................................................8 3. MEASURING DEVICE AND TEST EQUIPMENT..................................................................................................9 4. 20DB BANDWIDTH............................................................................................................................................. 11 4.1. Test Procedure...............................................................................................................................................11 4.2. Test Setup......................................................................................................................................................11 4.3. Test Results................................................................................................................................................... 11 5. POWER LINE CONDUCTED EMISSION MEASUREMENT............................................................................... 12 5.1. Block Diagram of Test Setup..........................................................................................................................12 5.2. Limits............................................................................................................................................................. 12 5.3. Test Procedure...............................................................................................................................................12 5.4. Measuring Results.........................................................................................................................................13 6. RADIATED EMISSION TEST...............................................................................................................................16 6.1. Measurement Procedure............................................................................................................................... 16 6.2. Test SET-UP (Block Diagram of Configuration)............................................................................................. 16 6.3. Radiated Emission Limit................................................................................................................................ 17 6.4. Measurement Result......................................................................................................................................19 7. TEST PHOTOGRAPHS AND EUT PHOTOGRAPHS..........................................................................................25 Report No.: SZNTT26019561E1-1 SZNTT-TR825-0Page 3 of 25 Hotline:0755-27889935http://www.ntt-testing.com TEST REPORT DESCRIPTION Applicant: Shenzhen Xianyang Innovation Technology Co., Ltd. Address: Rm 302, Bldg. 8, Yunli intelligent park, No. 7, Changfa Middle Rd, Bantian st., Longgang Dist., Shenzhen, China Manufacturer: Shenzhen Xianyang Innovation Technology Co., Ltd. Address: Rm 302, Bldg. 8, Yunli intelligent park, No. 7, Changfa Middle Rd, Bantian st., Longgang Dist., Shenzhen, China EUT: power bank Model Name: M1-5000 Trademark: RORRY Measurement Procedure Used: APPLICABLE STANDARDS STANDARDTEST RESULT FCC47CFRPart15,SubpartC PASS The above equipment was tested by Shenzhen NTT Testing Technology Co., Ltd.The test data, data evaluation, test procedures, and equipment configurations shown in thisreport were made in accordance with the procedures given in ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024+ Errata to C63.10a-2024 and the energy emitted by the sample EUT tested as described in this report is incompliance with conducted and radiated emission limits of FCC Rules Part 15C The test results of this report relate only to the tested sample identifiedin this report. Prepared by(Test Engineer): Cindy Qin Reviewer(Supervisor): Ken Wu Approved(Manager): Abel Yu Report No.: SZNTT26019561E1-1 SZNTT-TR825-0Page 4 of 25 Hotline:0755-27889935http://www.ntt-testing.com Modified Information VersionReport No.Revision DataSummary Ver.1.0SZNTT26019561E1-1May. 29, 2026Original Version Report No.: SZNTT26019561E1-1 SZNTT-TR825-0Page 5 of 25 Hotline:0755-27889935http://www.ntt-testing.com 1. SUMMARY OF TEST RESULTS Test ItemSection in CFR 47Result Anten…

Text truncated - open the document above for the full version.