2BVE2-0911-07FSC Mix Vienna Wireless Charging Writing Pad, FSCR Mix 5.5 x 8.5 Walton Wireless Charging Journal

0911-07 Vienna Wireless Charging Pad Writing Pad Instruction Manual Whats Included: 1 x Writing Pad with Wireless Charging Pad 1 x Micro-USB to USB Cable • • Functions: Instructions: Tech Specifications: Wireless charging pad surface LED indicator / Micro-USB input port for the wireless charging pad Phone stand Wireless Charging Mobile Phones and Other Electronic Devices: Ensure that your phone supports wireless charging. It will be listed in the manufacturer’s specifications. Connect the provided power cable to a power source and to the micro-USB port (2) on the bottom of the wireless charging pad writing pad. Once connected, the LED Indicator will turn RED. Place the enabled device on the surface of the wireless charging pad (1). The LED will turn BLUE to indicate that the phone is charging. If the LED indicator is flashing BLUE, an unknown object is being detected between the wireless charging pad and the phone by FOD (Foreign Object Detection), or the device is not compatible with wireless charging. The device will not begin to charge until the object is removed. Note: In order to charge devices, use only the accessory cable or the cable included with your own device by the manufacturer. USB Input: 5V/2A Wireless Output: 5V/1A, 5W 1. 2. 3. 1. • • • • ** ** 1. 2. Safety Precautions: FCC Statement: Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiated exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure conditions. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. 1. 2. Name of the Distributor: Leedsworld Inc Address of the Distributor: 400 Hunt Valley Road, New Kensington, PA 15068 USA. WWW.PCNA.COM FCC ID: 2BVE2-0911-07 Made in China WARNING – When using this product, basic precautions should always be followed, including the following: Read all the instructions before using the product. Charge the power bank fully before initial use. The unit’s full performance is achieved only after 2 or 3 completed charge and discharge cycles. To reduce the risk of injury, close supervision is necessary when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury. Do not use the device if damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury. Do not disassemble the device. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury. Do not expose the device to fire or excessive temperature. Exposure to fire or temperatures above 212°F may cause an explosion. Have servicing performed by a qualified repair person using only identical replacement parts. Avoid overheating: Do not place anything between the phone and the charger, especially magnetic devices. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.

2800-58 5.5 x 8.5 FSC® Mix Walton Wireless Charging Journal Instruction Manual Whats Included: 1 x 5.5 x 8.5 FSC® Mix Walton Wireless Charging Journal 1 x Micro to USB Cable • • Functions: Instructions: Tech Specifications: Wirelss Charging Surface Micro USB Input Port Wireless Charging Mobile Phones and Other Electronic Devices: Ensure that your device supports wireless charging, it will be listed in the manufacture’s specifications. Connect the provided charging cable to a power source and to the micro USB port on the top side of the wireless charging surface. Place the wireless charging supported device on the wireless charging surface(1). Once the device is fully charged, remove the device. Note: This device does not contain a battery. Power must be provided to the charging pad to function as described. USB Input: 5V/2A Wireless Output :5W 1. 2. 1. • • • • ** 1. 2. Safety Precautions: FCC Statement: Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiated exposure limits set forth for an uncontrolled environment. This equipment can be used in portable exposure conditions. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 1. 2. Name of the Distributor: Leedsworld Inc Address of the Distributor: 400 Hunt Valley Road, New Kensington, PA 15068 USA. WWW.PCNA.COM FCC ID: 2BVE2-0911-07 Made in China WARNING – When using this product, basic precautions should always be followed, including the following: Read all the instructions before using the product. Never store or use this product in temperatures below 32°F(0°C) or above 115°F(45°C). Do not overcharge your phone. The unit may become hot under excessive use. Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time. To reduce the risk of injury, close supervision is required when the product is used near children. Do not expose the device to moisture. Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury. Do not use the device if damaged or modified. Do not disassemble the device. For repairs, seek a qualified service professional. incorrect reassembly may result in a risk of fire or injury. Do not expose the device to fire or excessive temperatures above, Exposure to fire or temperatures above 104°F may cause explosion. Ensure that qualified service professionals use only identical replacement parts to ensure product safety. Attachments on the back of your phone can impede the effectiveness of the wireless charger, and lead to overheating. Please remove any attachments from the phone before charging on this device, attachments can interfer with wireless charging and lead to over heating. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.

DongguanHuayiStationeryLeatherCo.,Ltd. Room201,Building2,No.50,LongjingRoadGuanjingtou, FenggangTown,DongguanCity,Guangdong,China CoveredEquipmentCertificationAttestationLetter 4/20/2026 NemkoNorthAmerica,Inc. 303RiverRoad Ottawa K1V1H2 Canada ATTN.:ReviewingEngineer FCCID:2BVE2-0911-07 DongguanHuayiStationeryLeatherCo.,Ltd.(“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibitedfrom receivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedby anyoftheentitiesidentifiedonthecurrentCoveredList,theapplicantshould includeanexplanationonwhytheequipmentisnot“covered”equipment. DongguanHuayiStationeryLeatherCo.,Ltd.(“theapplicant”)certifiesthat,asofthe dateofthefilingoftheapplication,theapplicantisnotidentifiedontheCoveredListas anentityproducing“covered”equipment. DongguanHuayiStationeryLeatherCo.,Ltd.(“theapplicant”)certifiesthatthe equipmentforwhichauthorizationissoughtdoesnotincludecybersecurityoranti-virus softwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessorsand assignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886 andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:HardyHe Title:Generalmanager CompanyName:DongguanHuayiStationeryLeatherCo.,Ltd. Date:4/20/2026

DongguanHuayiStationeryLeatherCo.,Ltd. Room201,Building2,No.50,LongjingRoadGuanjingtou,FenggangTown,DongguanCity,Guangdong,China 4/20/2026 NemkoNorthAmerica,Inc. 303RiverRoad Ottawa,Ontario,Canada K1V1H2 AUTHORITYTOACTASAGENT-FCC Onourbehalf,IappointKathyWang(AudixTechnology(Shanghai)Co.,Ltd.),toactasouragent inthepreparationofthisapplicationforequipmentcertification.Icertifythatsubmitteddocuments properlydescribethedeviceorsystemforwhichequipmentcertificationissought.Ialsocertifythat eachunitmanufactured,importedormarketed,asdefinedinFCCregulationswillhaveaffixedtoita labelidenticaltothatsubmittedforapprovalwiththisapplication. Insigningthisletter,Applicantcertifiesthatneithertheapplicantnoranypartytotheapplicationis notsubjecttoadenialofFederalbenefits,thatincludeFCCbenefits,pursuanttoSection5301ofthe Anti-DrugAbuseActof1988,21U.S.C.§862becauseofaconvictionforpossessionordistribution ofacontrolledsubstance.See47CFR1.2002(b)forthedefinitionofa"party"forthesepurposes. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonourbehalf,I acknowledgethatallresponsibilityforcomplyingwiththetermsandconditionsforcertification,as specifiedbyNemkoNorthAmericaInc.,stillresidesstillresideswithus. Sincerely, Printedname:HardyHe Date:4/20/2026

DongguanHuayiStationeryLeatherCo.,Ltd. Room201,Building2,No.50,LongjingRoadGuanjingtou,FenggangTown,DongguanCity,Guangdong,China 4/20/2026 NemkoNorthAmerica,Inc. 303RiverRoad Ottawa,Ontario,Canada K1V1H2 REQUESTFORCONFIDENTIALITY-FCC FCCID:2BVE2-0911-07 PursuanttoSections0.457(d)and0.459oftheCommission’sRulesandFCCGuidancedocument 726920,weherebyrequestpermanentconfidentialtreatmentofexhibitsidentifiedassuchinthe tablebelowandrequesttheyarepermanentlywithheldfrompublicreviewbasedonthedocuments containingtradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic.The publicdisclosureofthisinformationmightbeharmfultotheapplicantandprovideunjustifiedbenefits toitscompetitors. ExhibitTypeofConfidentialityRequested BlockDiagrams☒Permanent ☐ShortTerm ExternalPhotos------------------ ☐ ShortTerm InternalPhotos ☐Permanent*☐ShortTerm OperationDescription ☒Permanent ☐ShortTerm PartsList&Placement/BOM☐Permanent ☐ShortTerm Tune-UpProcedure ☐Permanent☐ShortTerm SchematicDiagrams☒Permanent ☐ShortTerm TestSetupPhotos------------------ ☐ ShortTerm User’sManual ☐Permanent*☐ShortTerm Theasteriskeditems(*)requirefurtherinformationtobeprovidedinthisjustificationletterbeforepermanentconfidentiality willbeextendedtotheseexhibits.PleaserefertoFCCKDB726920D01foundat: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731andreviewsectionII,3)regarding specificinformationthatmustaccompanytheserequests. Note:anydocumentsheldundertheShort-Termconfidentialitywillautomaticallybecomepublic aftertherequestedtimeifanappropriateextensionrequesthasnotbeenreceived.Anyexhibits (i.e.,schematicdiagrams)thatmayhavealreadybeenrequestedtohave“Permanent” confidentialityasshownaboveneednotberepeatedunderShort-Termconfidentialityrequest. Sincerely, Signed: Printedname:HardyHe Title:Generalmanager CompanyName:DongguanHuayiStationeryLeatherCo.,Ltd.

Appendix II Page 1 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 APPENDIX II P HOTOGRAPHS OF EUT Appendix II Page 2 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 1 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) TOP APPEARANCE FIGURE 2 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) BOTTOM APPEARANCE Appendix II Page 3 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 3 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) FRONT APPEARANCE FIGURE 4 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) BACK APPEARANCE Appendix II Page 4 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 5 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) LEFT APPEARANCE FIGURE 6 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) RIGHT APPEARANCE Appendix II Page 5 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 7 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) PORT Appendix II Page 9 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 14 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) TOP APPEARANCE FIGURE 15 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) BOTTOM APPEARANCE Appendix II Page 10 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 16 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) FRONT APPEARANCE FIGURE 17 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) BACK APPEARANCE Appendix II Page 11 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 18 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) LEFT APPEARANCE FIGURE 19 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) RIGHT APPEARANCE Appendix II Page 12 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 20 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) PORT

Appendix II Page 6 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 8 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) INTERNAL VIEW-1 FIGURE 9 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) INTERNAL VIEW-2 Appendix II Page 7 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 10 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) INTERNAL VIEW-3 FIGURE 11 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) MAINBOARD FRONT Appendix II Page 8 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 12 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) MAINBOARD BACK FIGURE 13 FSC MIX VIENNA WIRELESS CHARGING WRITING PAD (0911-07BK) LOOP COIL ANTENNA Appendix II Page 13 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 21 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) INTERNAL VIEW-1 FIGURE 22 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) INTERNAL VIEW-2 Appendix II Page 14 of 14 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 FIGURE 23 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) MAINBOARD FRONT FIGURE 24 FSCR MIX 5.5 X 8.5 WALTON WIRELESS CHARGING JOURNAL (2800-58BK) MAINBOARD BACK -END-

Dongguan Huayi Stationery Leather Co., Ltd. FCC ID: 2BVE2-0911-07 Page 1 of 15 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26066 Prepared For: Dongguan Huayi Stationery Leather Co., Ltd. Room 201, Building 2, No.50, Longjing Road Guanjingtou, Fenggang Town, Dongguan City, Guangdong, China Prepared By: Audix Technology (Shanghai) Co., Ltd. 3F, Building 34, No. 680 Guiping Rd., Caohejing, Hi-Tech Park, Shanghai 200233, China Tel: +86-21-64955500 File No. : C1D2603020 Report No. : ACI-F26066 Date of Test : 2026.04.29 Date of Report : 2026.04.30 RF Exposure Evaluation Report On behalf of Dongguan Huayi Stationery Leather Co., Ltd. Product Name FSC Mix Vienna Wireless Charging Writing Pad FSCR Mix 5.5 x 8.5 Walton Wireless Charging Journal Model No. 0911-07BK 2800-58BK FCC ID: 2BVE2-0911-07 The statement is based on a single evaluation of one sample of the above-mentioned products. It does not imply an assessment of the whole production and does not permit the use of the test lab logo. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. Dongguan Huayi Stationery Leather Co., Ltd. FCC ID: 2BVE2-0911-07 Page 2 of 15 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26066 TABLE OF CONTENTS Page 1 SUMMARY OF STANDARDS AND RESULTS .......................................................................... 4 1.1 Description of Standards and Results ......................................................................................... 4 2 GENERAL INFORMATION .......................................................................................................... 5 2.1 Description of Equipment Under Test ........................................................................................ 5 2.2 EUT Specifications Assessed in Current Report ........................................................................ 6 2.3 Test Information ......................................................................................................................... 6 2.4 Sample Description .................................................................................................................... 6 2.5 Supported equipment .................................................................................................................. 6 2.6 Description of Test Facility ........................................................................................................ 6 3 RADIO FREQUENCY EXPOSURE EVALATION .................................................................... 7 3.1 Test Equipment ........................................................................................................................... 7 3.2 Block Diagram of Test Setup ..................................................................................................... 7 3.3 Limits .......................................................................................................................................... 8 3.4 Test Procedures .......................................................................................................................... 9 3.5 Test Results .............................................................................................................................. 11 4 TEST SETUP PHOTO ................................................................................................................... 13 Dongguan Huayi Stationery Leather Co., Ltd. FCC ID: 2BVE2-0911-07 Page 3 of 15 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26066 RF Exposure Evaluation Report Applicant : Dongguan Huayi Stationery Leather Co., Ltd. EUT Description : FSC Mix Vienna Wireless Charging Writing Pad, FSCR Mix 5.5 x 8.5 Walton Wireless Charging Journal (A) Model No. : Refer to Sec.2.1 (B) Power Supply : DC 5V (C) Test Voltage : AC 120V/60Hz to Adapter Test Procedure Used: FCC RULES AND REGULATIONS PART 1 (1.1310) AND PART 2 (2.1091) AND KDB 680106 D01 WIRELESS POWER TRANSFER V04 The device described above is tested by Audix Technology (Shanghai) Co., Ltd. to determine the maximum emission levels emanating from the device. The maximum emission levels are compared to the FCC Part 1.1310&2.1091 limits. The test results are contained in this test report and Audix Technology (Shanghai) Co., Ltd. is assumed full responsibility for the accuracy and completeness of these measurements. This report also shows that the EUT (M/N: Refer to Sec2.1), which was tested is technically compliance with the FCC limits. This report applies to above tested Sample only. This report shall not be reproduced in part without written approval of Audix Technology (Shanghai) Co., Ltd. Date of Test : 2026.04.29 Date of Report : 2026.04.30 Producer : Review : Signatory : KAMP CHEN / Manager HUIMIN YAN / Assistant JAREY LU / Assistant Manager Dongguan Huayi Stationery Leather Co., Ltd. FCC ID: 2BVE2-0911-07 Page 4 of 15 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26066 1 SUMMARY OF STANDARDS AND RESULTS 1.1 Description of Standards and Results The result is determined according to the decision rules of customer selection in the ASC-403 application service form. 1. According to IEC GUIDE 115 Procedure 2 and ILAC-G8, the uncertainties value is not used in determining the PASS/FAIL results. 2. If the required specification or standard already contains the decision rules, it will be carried out in accordance with the regulations or standard documents or the requirements of the competent units. If the required specification or standard does not contain a decision rule, the same paragraph 1. 3. If your company has a required decision rule, it will be implemented in accordance with the requirements and ISO/IEC Guide 98-4 specifications. The EUT have been tested according to the applicable standards as referenced below: Description / Test Item Test Standard Results Meets Limit EMISSION RF Exposure Evaluat…

Text truncated - open the document above for the full version.

songdao Page 1 of 3 SPECIFICATION FOR APPROVAL CUSTOMER: CUST P/N: 36130800006 FINE P/N: A511-6.5UH 0.08*105P*10TS DESC: 50MMX5.0MMX0.8MM DATE: 2026/04/21 Version: A.0 PREPARED BY CHECKED BY APPROVED BY CUSTOMER APPROVE Shenzhen Songdao Technology Co., Ltd 1234202 TEL13728755750 FAX0755-84526500 E- [email protected] songdao Page 2 of 3 Version Change History Rev. Before Change After Change Change Date Approved By A.0 ---- 2026/04/21 uH Q DCRm 1 6.49 57.7 46.3 2 6.56 58.3 46.2 3 6.6 59.3 46.3 4 6.62 59.4 46.0 5 6.62 59.8 46.1 6 6.66 59.6 46.3 7 6.55 58.8 46.2 8 6.66 59.0 46.4 9 6.6 59.1 46.2 10 6.6 59.3 46.3 11 6.54 58.5 46.2 12 6.58 57.3 47.5 13 6.55 58.6 46.2 14 6.50 58.4 46.2 15 6.53 55.5 50.67 16 6.61 59.3 46.4 17 6.51 58.7 46.1 18 6.55 58.6 46.4 19 6.52 58.6 46.2 20 6.50 58.7 46.1 uH Q DCR(m) 1 6.52 58.1 46.2 2 6.56 57.8 46.1 3 6.68 59.6 46.1 4 6.62 57.4 47.3 5 6.68 59.2 46.2 songdao Page 3 of 3 DESC 20.5x43-6.5uH-0.08x105-50mm-50C RevA.0 CUST: XXX CUST P/N: DIMENSION:(mm) Only radiated measurements are used to show compliance with FCC limits for fundamental and spurious emissions. SCHEMATIC DIAGRAM: 1.; 2.8mm(ref) 1-2 Ts; 3. 50*5.3*1mm, 5.3mm,1.0±0.3mm 4. Winding Specification: NO. TERMINAL WIRE Turns Winding Direction 1 S F 0.08*105P 10Ts CCW ELECTRICAL CHARACTERISTICS: TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% NO. ITEM TERMINAL SPECIFICATION TEST FREQUENCY TEST EQUIPMENTS 1 IND. S-F 3.8uH ±20% 100KHz/0.25V LCZ METER UC2836 2 IND. S-F 6.3uH ±10% 100KHz/0.25V LCZ METER UC2836 3 DCR S-F 53m 100KHz/0.25V LCZ METER UC2836 4 Q 55 100KHz/0.25V LCZ METER UC2836 /PREPARED BY/ D AT E /CHECKED BY/ D AT E 2026/04/21 2026/04/21

Dongguan Huayi Stationery Leather Co., Ltd. FCC ID: 2BVE2-0911-07 Page 1 of 33 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 Prepared For: Dongguan Huayi Stationery Leather Co., Ltd. Room 201, Building 2, No.50, Longjing Road Guanjingtou, Fenggang Town, Dongguan City, Guangdong, China Prepared By: Audix Technology (Shanghai) Co., Ltd. 3F, Building 34, No. 680 Guiping Rd., Caohejing, Hi-Tech Park, Shanghai 200233, China Tel: +86-21-64955500 File No. : C1D2603020 Report No. : ACI-F26065 Date of Test : 2026.03.21-26 Date of Report : 2026.04.09 TEST REPORT On behalf of Dongguan Huayi Stationery Leather Co., Ltd. Product Name FSC Mix Vienna Wireless Charging Writing Pad FSCR Mix 5.5 x 8.5 Walton Wireless Charging Journal Model No. 0911-07BK 2800-58BK FCC ID: 2BVE2-0911-07 The statement is based on a single evaluation of one sample of the above-mentioned products. It does not imply an assessment of the whole production and does not permit the use of the test lab logo. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. TESTING NVLAP LAB CODE 200371-0 Dongguan Huayi Stationery Leather Co., Ltd. FCC ID: 2BVE2-0911-07 Page 2 of 33 Audix Technology (Shanghai) Co., Ltd. Report No.: ACI-F26065 TABLE OF CONTENTS Page 1 SUMMARY OF STANDARDS AND RESULTS .......................................................................... 4 1.1 Description of Standards and Results ......................................................................................... 4 2 GENERAL INFORMATION .......................................................................................................... 5 2.1 Description of Equipment Under Test ........................................................................................ 5 2.2 EUT Specifications Assessed in Current Report ........................................................................ 6 2.3 Test Information ......................................................................................................................... 6 2.4 Sample Description .................................................................................................................... 6 2.5 Supported equipment .................................................................................................................. 6 2.6 Description of Test Facility ........................................................................................................ 6 3 CONDUCTED EMISSION TEST .................................................................................................. 7 3.1 Test Equipment ........................................................................................................................... 7 3.2 Block Diagram of Test Setup ..................................................................................................... 7 3.3 Conducted Emission Limits (§15.207) ....................................................................................... 8 3.4 Test Configuration ...................................................................................................................... 8 3.5 Operating Condition of EUT ...................................................................................................... 8 3.6 Test Procedures .......................................................................................................................... 8 3.7 Test Results ................................................................................................................................ 9 4 RADIATED EMISSION TEST ..................................................................................................... 14 4.1 Test Equipment ......................................................................................................................... 14 4.2 Block Diagram of Test Setup ................................................................................................... 15 4.3 Radiated Emission Limit (§15.205&15.209) ........................................................................... 16 4.4 Test Configuration .................................................................................................................... 18 4.5 Operating Condition of EUT .................................................................................................... 18 4.6 Test Procedures ........................................................................................................................ 18 4.7 Test Results .............................................................................................................................. 19 5 20 DB BANDWIDTH MEASUREMENT .................................................................................... 28 5.1 Test Equipment ......................................................................................................................... 28 5.2 Block Diagram of Test Setup ................................................................................................... 28 5.3 Specification Limits (§15.215(c)) ............................................................................................ 28 5.4 Operating Condition of EUT .................................................................................................... 28 5.5 Test Procedure .......................................................................................................................... 28 5.6 Test Results .............................................................................................................................. 29 6 ANTENNA REQUIREMENT ....................................................................................................... 31 6.1 Specification Limits (§15.203) ................................................................................................. 31 6.2 Result .............…

Text truncated - open the document above for the full version.

Appendix I Page 1…

Text truncated - open the document above for the full version.