2BVGW-CSC051A01Digital Bluetooth Level Gauge

us Agent for Service of Process LETTER OF ATTES TATIO N TO: Office of Engineerin g Technolog y Federal Co mmunicatio ns Commi ssion 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: J.P Quick Inc. FRN: 0036337913 Contact Name: James Brown Address: 9878 W Belleview Ave Ste 2106 Denver, CO 80123, United States Telephone No: (970) 305-9930 Email: [email protected] Applicant: Company name: NEREBELZHA VIE T NAM CO., LTD Product Description: Digital Bluetooth Level Gauge FRN: Grantee Code: FCC ID: Contact Name: Address: 0038233557 2BVGW 2BVGW-CSC051A01 Jingpei Tan Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Telephone No: +84 0968205886 Email: [email protected] [NEREBELZHA VIETNAM CO., LTD] cert币es that, as of the date of this filing of the application with the TCB, [J.P Quick Inc.] is our designated US agent for service of process for the above referenced FCC ID. [NEREBELZHA VIETNAM CO., LTD] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation o 「 the conclusion of any commission related proceeding involving equipment. [J 首 P Quick Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Servi ce of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Aut horization Program, Report and Order FCC 22-84, and clause § 2.911. Th e Applic.ant is aware of and agr ees to c o mply with the requirements outlined in the FCC Equipment Authorizatio n Program, Report and Order FCC 22-84, and clause§ 2.911. Date: 2026/07/O3 Applicant's Name: Jingpei Tan Tit1e:Department Head Signatur e 气？幻 、 飞 n 1/1 USA Tit le Signatu L 乡气， ＊ 卡

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: NEREBELZHA VIETNAM CO., LTD Grantee code: 2BVGW FCC ID: 2BVGW-CSC051A01 FRN: 0038233557 Contact Name: Jingpei Tan Address: Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Telephone No: +84 0968205886 Fax No: N/A Email: [email protected] i. [NEREBELZHA VIETNAM CO., LTD] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [NEREBELZHA VIETNAM CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [NEREBELZHA VIETNAM CO., LTD] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Date: 2026-07-03 Applicant’s Name: Jingpei Tan Title: Department Head Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

NEREBELZHA VIETNAM CO., LTD Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐Yes, go to Item 2. ☒No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Device Digital Bluetooth Level Gauge Company name NEREBELZHA VIETNAM CO., LTD Grantee code 2BVGW FCC ID 2BVGW-CSC051A01 FRN 0038233557 Contact name Jingpei Tan Address Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Telephone number +84 0968205886 [email protected] Chipset/module information WT200S Operating System (if applicable) N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 Item 2. Technical Requirements for Kaspersky Cybersecurity Software: # General Requirements (For all Devices) Yes / No or N/A Comments 1 Internet connection for activation and updates (For all Operating Systems) N/A # General Requirements (For Windows Devices) Yes / No or N/A Comments 1 Storage: 1500 MB free space on the hard drive N/A 2 Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3 Processor: 1 GHz or higher (x86 or x64) N/A 4 Memory (RAM)1 GB (32-bit) or 2 GB (64-bit) N/A 5 Screen Resolution: Minimum resolution of 1024 x 768 N/A # General Requirements (For macOS devices) Yes / No or N/A Comments 1 Operating System macOS® 13 – 14 N/A 2 Memory (RAM)4 GB N/A 3 Storage: 3455 MB free space on the hard drive N/A # General Requirements (For Android Devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 2 Operating System: Android™ 10 – 14 N/A 3 Screen Resolution: Minimum resolution of 320 x 480 N/A # General Requirements (for iOS devices) Yes / No or N/A Comments 1 Storage: 150 MB free space N/A 3 2 Operating System: iOS® 17 N/A # General Requirements (For Linux system) Yes / No or N/A Comments 1 Hard drive: 1 GB of free space N/A 2 CPU: Intel Pentium 1 GHz or higher 3 RAM: 1 GB 4 Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; 4 After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: # Physical Interface Purpose Justification 1 1 # Wireless Interface Purpose Justification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: Jingpei Tan Date: 2026-07-03 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications.

TCB CALL página 1 File FCC ID: 2BVGW-CSC051A01 Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. In google: TCB CALL página 2 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "US Agent for Service of Process LETTER OF ATTESTATION" included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit "US Agent for Service of Process LETTER OF ATTESTATION" >

C5266091_X10_Ed.2 1/1 NEREBELZHA VIETNAM CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026-07-03 Subject: Request for Confidentiality FCC ID: 2BVGW-CSC051A01 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☒ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☒ User’s Manual ☐ NOTE 1 ☒ Internal Photos ☐ NOTE 1 ☒ Parts List / Tune Up ☐☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No SDR Software / Security Info No ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of _180__ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Jingpei Tan Title: Department Head

C5266091_X8_Ed.1 1/1 Letter of Authorization < NEREBELZHA VIETNAM CO., LTD > Company: NEREBELZHA VIETNAM CO., LTD Address: Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Product Name: Digital Bluetooth Level Gauge Model Number: AUTEL-CSC051A/01 FCC Identifier: 2BVGW-CSC051A01 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jingpei Tan Date: 2026-07-03 Title: Department Head Signature of applicant:

Label Location On EUT Label Size: 60*40mm Product Name: Digital Bluetooth Level Gauge Model No.: AUTEL-CSC051A/01 Input: 3V 100Ma FCC ID: 2BVGW-CSC051A01 IC: 10826A-CSC051A01

RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in KDB 447498 D01 V06 and §1.1307(b) CFR Title 47 §2.1091(b): (b) For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter’s radiating structure(s) and the body of the user or nearby persons. FCC ID: 2BVGW-CSC051A01 EUT Specification EUT Digital Bluetooth Level Gauge Frequency band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: 2.402GHz~2.480GHz BDR&EDR NFC: 13.56MHz RFID: 125kHz Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Exposure classification Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Evaluation applied MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Note: Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m.AKDB inquiry is required to determine the applicable exposure limits below 100 kHz. Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Measurement Result BT worst case: Operating Mode Channel Frequency Measured Power Tune up tolerance Max. Tune up Power Antenna Gain Power density at 20cm Power density Limits (mW/cm 2 ) (MHz) (dBm) (dBm) (dBm) (dBi) (mW/ cm 2 ) GFSK 2402 1.49 1.49±1 2.49 5.19 0.0012 1 Test Result: Pass

TEST REPORT Report No.: 8430EU011604W Applicant: NEREBELZHA VIETNAM CO., LTD Address: Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Product Name: Digital Bluetooth Level Gauge Model No.: AUTEL-CSC051A/01 Trademark: N/A FCC ID: 2BVGW-CSC051A01 Test Standard(s): 47 CFR Part 15.247 Test Result: Pass Date of Receipt: Apr. 16, 2026 Test Date: Apr. 17, 2026 - May 25, 2026 Date of Issue: Jul. 02, 2026 ISSUED BY: SHENZHEN EU TESTING LABORATORY LIMITED Prepared by: Reviewed and Approved by: Mikey Zhu/ Engineer Sally Zhang/ Manager Page 2 of 110 Report No.: 8430EU011604W TRF Version: A01 Revision Record Report Version Issued Date Description Status V0 Jul. 02, 2026 Original Valid Page 3 of 110 Report No.: 8430EU011604W TRF Version: A01 Table of Contents 1 COVER PAGE .................................................................................................................................. 1 2 GENERAL INFORMATION ....................................................................................................................... 5 2.1 APPLICANT INFORMATION .................................................................................................................. 5 2.2 MANUFACTURER INFORMATION .......................................................................................................... 5 2.3 FACTORY INFORMATION ..................................................................................................................... 5 2.4 GENERAL DESCRIPTION OF E.U.T. ..................................................................................................... 5 2.5 TECHNICAL INFORMATION OF E.U.T. ................................................................................................... 6 3 TEST SUMMARY ...................................................................................................................................... 7 3.1 TEST STANDARD ............................................................................................................................... 7 3.2 TEST VERDICT ................................................................................................................................... 7 3.3 TEST LABORATORY ........................................................................................................................... 8 4 TEST CONFIGURATION .......................................................................................................................... 9 4.1 TEST ENVIRONMENT .......................................................................................................................... 9 4.2 TEST EQUIPMENT .............................................................................................................................. 9 4.3 DESCRIPTION OF SUPPORT UNIT ....................................................................................................... 11 4.4 TEST MODE ..................................................................................................................................... 11 4.5 DESCRIPTION OF CALCULATION ........................................................................................................ 11 4.6 MEASUREMENT UNCERTAINTY ......................................................................................................... 12 4.7 DEVIATION FROM STANDARDS .......................................................................................................... 12 4.8 ABNORMALITIES FROM STANDARD CONDITION.................................................................................. 12 5 EVALUATION RESULTS (EVALUATION) .............................................................................................. 13 5.1 ANTENNA REQUIREMENT .................................................................................................................. 13 5.1.1 Test Specification .............................................................................................................. 13 5.1.2 Test Data ........................................................................................................................... 13 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) ............................................................................ 14 6.1 20DB BANDWIDTH........................................................................................................................... 14 6.1.1 Test Specification .............................................................................................................. 14 6.1.2 E.U.T. Operation ................................................................................................................ 14 6.1.3 Test Setup Diagram ........................................................................................................... 15 6.1.4 Test Data ........................................................................................................................... 15 6.2 MAXIMUM CONDUCTED OUTPUT POWER .......................................................................................... 16 6.2.1 Test Specification .............................................................................................................. 16 6.2.2 E.U.T. Operation ................................................................................................................ 16 6.2.3 Test Setup Diagram ........................................................................................................... 16 6.2.4 Test Data ........................................................................................................................... 16 6.3 CHANNEL SEPARATION .................................................................................................................... 17 6.3.1 Test Specification .............................................................................................................…

Text truncated - open the document above for the full version.

东莞市一佳电子通讯科技有限公司 Dongguan YiJia Electronics Communication Technology Co.,Ltd. 规格承认书 SPECIFICATION FOR APPROVAL 客户 日期2019/03/28 Date 编号19032802 File No 版本1.0 Revision SPECIFICATION FOR APPROVAL 客户 CUSTOMER: 客户料号 CUSTOMER NO: 品名24G A t品名2.4G Antenna PART NAME: 供方料号A35-3216 SUPPLIER NO: 送样日期Date:送样数量Q“TY:送样日期Date: 送样数量QTY: 客户确认CUSTOMER APPROVED BY APPROVALCHIEFSUPERVISOR 供方确认SUPPLIER SIGNATURE APPROVALCHECKDESIGN add：东莞市长安镇沙头合兴路149号B栋二楼Tel:0769-85535057 Fax:0769-81664308 APPROVALCHECKDESIGN ChenGuoqiangWenXueChenXingcheng YJ-RD-F04-A -2- 目录 Tableofcontents 规格书版本更改记录Versionrejiggertrackrecord..............................3 1.概述Introduction..................................................................4 2.型号PartNumber...............................................................4 3.外型尺寸及测试板焊盘尺寸Dimensions.....................4～5 4.测试电路和匹配电路EvaluationBoardandMatchingCircuits............5 5.电气性能ElectricalCharacteristics..........................................6 6.特性曲线Characteristiccurve...................................................6 7.方向图RadiationPattern...................................................7～8 8.可靠性试验后允许误差PostDependabilityTolerance...............9 9.可靠性试验DependabilityTest..........................................9～10 10.回流焊温度ReflowSolderingStandardCondition.....................10 11.包装尺寸PackagingandDimensions....................................11 -3- 产品规格书版本更改记录 Versionrejiggertrackrecord 版本号 Version 更改记录Rejigger 拟制 Prepared 批准 Approve 日期 Date 备注： 1、更改产品电性能指标时，版本号需更换（V1.0换为V2.0、V3.0......）； 2、更改产品测试方法（包括可靠性测试条件），或更改使用条件时，当前版本号加系列（V1.0 换为V1.1、V1.2......）。 -4- 产品尺寸/Size：3.2×1.6×1.2 1.概述INTRODUCTION 微波多层陶瓷天线LA系列产品设计用于WLAN、WiFi、蓝牙、PHS，手机 多频天线,FM等小体积SMD片式设计。 MicrowaveMulti-LayerCeramicAntennaLAseriesaredesignedtobeused inWLAN、WiFi、Bluetooth、PHS、Multiple-bandMobilephoneantenna,FM,etcand compactsizeSMDchipdesign. 2.型号PartNumber LA31H2450-A35 3.外型尺寸 Dimensions （ Unit ： mm ） 天线频率/AntennaFrequency:2450MHz 产品设计结构H型/ViaDesignSeries 多层结构天线/Multi-layerAntenna 产品名称，编号A35/ProudctName:A35 5 4.测试电路和匹配电路EvaluationBoardandMatchingCircuits 6.2nH 1.8nH -6- 5.电气性能 ElectricalCharacteristics 6.特性曲线Characteristiccurve No. Item（项目）Specifications（特性） 5.1 CentralFrequency中心频率(Nomatching)2875MHz (带匹配电路测试)AfterMatching2450MHz 5.2BandWidth通带宽度100MHztyp. 5.3PeakGain峰值增益5.19dBi 5.4V.S.W.R驻波比≤2.0 5.5 Polarization极化方式 Linear线性 5.6 AzimuthBeamwidth方位角 Omni-directional全向 5.7 Impedance阻抗 50Ω 7 7.方向图Radiation Pattern coordinates： X-Z Plane Plane Y-Z Plane - 8 - X-Y Plane 3DRadiation Pattern Frequency (MHz) 240024502500 Avg. Gain (dBi) -0.23-0.36-0.51 Peck Gain (dBi) 4.985.194.55 Efficiency (%) 7071.269 9 8可靠性试验后允许误差PostDependabilityTolerance 经可靠性试验后允许比起始读数偏差见下表 PostDependabilityTolerance(Refertothetable) 9可靠性试验DependabilityTest 基准条件：温度范围Temperaturerange25±5°C 相对湿度范围RelativeHumidityrange55~75%RH 工作温度OperatingTemperaturerange-40°C~+85°C 贮藏温度StorageTemperaturerange-40°C~+85°C 9.1耐振动VibrationResist 在振动频率为10~55Hz振幅为1.5mm沿X.Y.Z方向各振动2小时后测试符合表8.1~8.4规定。 Thedeviceshouldsatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterappliedto thevibrationof10to55Hzwithamplitudeof1.5mmfor2hourseachinX,YandZdirections. 9.2耐跌落冲击DropShock 在100cm高度处按X，Y，Z三个面分别自由跌落在木制地板上共3次后测试符合表8.1~8.4规 定。 Thedeviceshouldsatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterdropping ontothehardwoodenboardfromtheheightof100cmfor3timeseachfacetofthe3dimensionsofthe device. 9.3耐焊接热SolderHeatProof 能承受经120~150°C的温度预热120秒后，在255°C+10°C的焊锡浸5±0.5秒，或300°C-10°C的 电烙铁焊接3±0.5秒，焊接面无损伤。 Thedeviceshouldbesatisfiedafterpreheatingat120°C~150°Cfor120secondsanddippingin solderingSnat255°C+10°Cfor5±0.5seconds，orelectriciron300°C-10°Cfor3±0.5seconds， withoutdamnify. 9.4结合力试验TensileStrengthofTerminal 在产品电极端子上或表面上应能承受1kg垂直拉力10±1秒。 Thedeviceshouldnotbebrokenaftertensileforceof1.0kgisslowlyappliedtopullaleadpinof thefixeddeviceintheleadaxisdirectionfor10±1seconds. No.Item（项目） PostDependabilityTolerance ( 可靠性试验后允许附加误差 ) 8.1CentralFrequency中心频率±5MHz 8.2BandWidth通带宽度±5MHz 8.3Gain增益±0.1dBi 8.4V.S.W.R(inBW)驻波比±0.1 10 9.5耐弯曲试验BendingResistTest 将产品按图焊在1.6±0.2mm的PCB板中间，由箭头方向施 力：1mm/S，弯曲距离：1.5mm，保持5±1S，产品金属层无脱落。 WeldtheproducttothecenterpartofthePCBwiththethickness 1.6±0.2mmastheillustrationshows,andkeepexertingforce arrow-wardonitatspeedof:1mm/S,andholdfor5±1Satthe positionof1.5mmbendingdistance,sofar,anypeelingoffofthe productmetalcoatingshouldnotbedetected. 9.6耐湿热特性MoistureProof 在温度为60±2°C，相对湿度90~95%的恒温湿箱中放置96小时，在常温中恢复1~2小时后测 试，符合表8.1~8.4规定。 Thedeviceshouldsatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterexposedto thetemperature60±2°Candtherelativehumidity90~95%RHfor96hoursand1~2hoursrecoverytime undernormalcondlition. 9.7高温特性HighTemperatureEndurance 在温度为85±5°C的恒温箱中放置96±2小时，在常温中恢复1~2小时后测试。符合表8.1~8.4 规定。 Thedeviceshouldsatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterexposedto temperature85±5°Cfor96±2hoursand1~2hoursrecoverytimeundernormaltemperature. 9.8低温特性LowTemperatureEndurance 在温度为-40°C±5°C低温箱中放置96±2小时后恢复1~2小时测试符合表8.1~8.4规定。 Thedeviceshouldalsosatisfytheelectricalcharacteristicsspecifiedinparagraph8.1~8.4afterexposed tothetemperature-40°C±5°Cfor96±2hoursandto2hoursrecoverytimeundernormaltemperature. 9.9温度循环TemperatureCycleTest 在-40°C温度中保持30分钟，再在+85°C温度中保持30分钟，共循环5次后在常温中恢复1~2 小时后测试符合表8.1~8.4规定。 Thedeviceshouldalsosatisfytheelectricalcharacteracticsspecifiedinparagraph8.1~8.4after exposedtothelowtemperature-40°Candhightemperature+85°Cfor30±2mineachby5cyclesand1 to2hoursrecoverytimeundernormaltemperature. 10回流焊温度ReflowSolderingStandardCondition 11包装尺寸(3216) PackagingandDimensions -11- 11.1PlasticTape 包装说明：RemarksforPackage 载带尾部空穴长度150～200mm，载带头部空穴长度250～300mm，头部的盖带加长250mm。 Reservealengthof150~200mmforthetrailerofthecarrierand250~300mmfortheleaderofthe carrierandfurther250mmofcovertapeattheleadingpartofthecarrier. 11.2Reel（3000pcs/Reel） 11.3储存条件StoragePeriod 易氧化产品，产品拆封后请于48小时内用完或重新密封包装！ Oxidizable.material,pleaserepackwithin48hoursbyre-sealthepackagetreatmentafterusethem!