2BVGW-DC2513Wireless Temperature Clamp

Quick Reference Guide TPC-B/TPC-R Wireless Temperature Clamp Thank you for purchasing the TPC-B/TPC-R Wireless Temperature Clamp. When used with Autel diagnostic tools (sold separately), the clamp measures the temperature of the automotive air conditioning piping and transmits data via Bluetooth, providing parameter-based evidence for air conditioning systems diagnostics. Our products are manufactured to a high standard and — when used according to these instructions and properly maintained — will provide years of trouble-free performance. Product Description Front View Right View 1. Battery Compartment — holds 2 x AAA batteries. Slide the latch switch to the Unlock position to open the cover. Slide the latch switch to the Lock position to secure the cover. 2. Power Button/Status LED — long press to power on/off the device. Refer to Table 1- 1 Status LED Description for details on status LED. Table 1-1 Status LED Description LED Color Description Status Yellow  Flashes yellow when the clamp is upgrading its software or flashes yellow three times quickly before shutting down.  Lights solid yellow when the clamp is performing a self- test or when a Bluetooth error occurs during self-test. Green Lights solid green when the clamp battery level is normal. Blue  Lights solid blue when the clamp is connected via Bluetooth, but there is no data being transmitted.  Flashes blue when transmitting Bluetooth data. Red  Lights solid red when the clamp battery level is low.  Flashes red when the clamp is open or incorrectly clamped. Technical Specifications Item Description Connectivity BT V5.0 Battery Type 2 x AAA Pipe Size Compatibility 6 mm to 30 mm (0.2" to 1.2") Measurement Range -46°C to 125°C (-50.8°F to 257°F) Accuracy ±0.5°C (±0.9°F) Wireless Range 50 m (164") Radio Frequency 2.4 GHz Operating Temperature -20°C to 50°C (-4°F to 122°F) Storage Temperature -20°C to 60°C (-4°F to 140°F) Weight 143 g (0.32 lbs.) Dimensions (H x W x D) 161.5 mm (6.36") x 100 mm (3.94") x 34 mm (1.34") Getting Started WARNING: Before operating or maintaining this device, please read these instructions carefully, paying extra attention to the safety warnings and precautions. Failure to do so may cause damage and/or personal injury and will void the product warranty. 1. Install the batteries into the battery compartment. (2 x AAA batteries) 2. Long press the Power button to power on the clamp. 3. After powering on the MaxiHVAC tablet, c onnect the clamp to the MaxiHVAC tablet via Bluetooth. (The Bluetooth ID will match the product serial number which can be found on the product label.) 4. Tap HVAC on the MaxiHVAC Job Menu. 5. Follow the dynamic graphic instructions on the screen to use the clamp. Maintenance Clean the exterior of the clamp with a damp cloth. Do not use detergents or solvents. Packing List Wireless Temperature Clamp – Red/Blue 2 PCS 放200001415框图 Quick Reference Guide (This document) Multilingual Safety Instruction (Optional) Multi-language Documentation Download Guide (Optional) Warranty Autel guarantees that the clamp is free from material and manufacturing defects for a period of 12 months. Autel will replace at its own discretion any merchandise determined to be defective during the warranty period. The warranty shall be void if any of the following occurs: 1. Improper installation of the product; 2. Improper use; 3. Product damage due to collision, man-made damage or natural disasters; 4. Exceeding the product-specific use restrictions. Compliance Information Autel Intelligent Technology Corp., Ltd. hereby declares that the radio equipment types TPC-B/TPC-R are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following URL: https://www.autel.com/download.jhtml NOTE: The illustrations in this guide are for reference only. The actual product may differ. This device contains licence‐exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence‐exempt RSS(s). Operation is subject to the following two conditions:This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. ‐ RF exposure statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. ‐ French: Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes: Cet appareil ne doit pas causer d'interférences. Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement indésirable de l'appareil. Déclaration d'exposition RF: L'appareil a été évalué pour répondre aux exigences generals d'exposition aux RF. L'appareil peut être utilisé dans des conditions d'exposition portable sans restriction.

Rev 1/26/2023 NEREBELZHA VIETNAM CO., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-07-09 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2BVGW-DC2513 NEREBELZHA VIETNAM CO., LTD certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. NEREBELZHA VIETNAM CO., LTD certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Jingpei Tan) Rev 1/26/2023 NEREBELZHA VIETNAM CO., LTD Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-07-09 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2BVGW-DC2513 NEREBELZHA VIETNAM CO., LTD certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Jingpei Tan)

(970) 305-9930

NEREBELZHA VIETNAM CO., LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: July 9, 2026 Subject; Request for Confidentiality FCC ID: 2BVGW-DC2513 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Jingpei Tan Title: Department Head

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 NEREBELZHA VIETNAM CO., LTD Date：2026-07-09 Product Model Number: Compressor Box FCC ID: 2BVGW-DC2531 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Jingpei Tan Contact Listed on FCC Wesbite Title: Department Head Email: [email protected] On behalf of: NEREBELZHA VIETNAM CO., LTD

Ext Photos Model: TPC-B, TPC-R Photo 1 Model: TPC-R Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Model: TPC-B Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 Photo 13

Label and Label Location Model: TPC-B Label：55.65mm*15.65 mm Label Location： Label&location Label and Label Location Model: TPC-R Label：55.65mm*15.65 mm Label Location： Label&location

Int Photos Model: TPC-R Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 ANT Photo 7 Photo 8 Photo 9 Photo 10

- Page 1 of 9 - Report No.: HB20260629001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Wireless Temperature Clamp Trade Mark: AUTEL Model Number: TPC-B, TPC-R FCC ID: 2BVGW-DC2513 Prepared for NEREBELZHA VIETNAM CO., LTD Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 9 - Report No.: HB20260629001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE .................................................................................................................................................... 8 4.1 STANDALONE SAR TEST EXCLUSION CONSIDERATIONS........................................................................................................ 8 4.1.1 Limit ............................................................................................................................................................ 8 4.1.2 Test Procedures ........................................................................................................................................... 8 4.1.3 Test Result ................................................................................................................................................... 9 - Page 3 of 9 - Report No.: HB20260629001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : NEREBELZHA VIETNAM CO., LTD Address ................................. : Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Manufacturer's Name ..................................... : Autel Intelligent Technology Corp., Ltd. Address ................................. : Floor 2, Caihong Keji Building, 36 Hi-tech North Six Road, Songpingshan Community, Xili Sub-district, Nanshan District, Shenzhen City, China Product description Product name ........................ : Wireless Temperature Clamp Model Number ....................... : TPC-B, TPC-R Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 447498 D01 General RF Exposure Guidance v06 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Jun. 26, 2026~ Jul. 02, 2026 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : ( G a r y Lu) Authorized Signatory : (L e o S u) - Page 4 of 9 - Report No.: HB20260629001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Jul. 02, 2026 Original - Page 5 of 9 - Report No.: HB20260629001E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-h…

Text truncated - open the document above for the full version.

AUTEL No. 59, Muyu Road, Shatou Community, Chang'an Town, Dongguan City

- Page 1 of 65 - Report No.: HB20260629001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: Wireless Temperature Clamp Trade Mark: AUTEL Model Number: TPC-B, TPC-R FCC ID: 2BVGW-DC2513 Prepared for NEREBELZHA VIETNAM CO., LTD Lot B30, Land Plot CN4, An Duong Industrial Park, An Phong Ward, Hai Phong City, Vietnam Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 65 - Report No.: HB20260629001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION .................................................................................................................... 6 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 6 1.2 TEST MODE .............................................................................................................................................................. 6 1.3 OPERATION CHANNEL LIST .......................................................................................................................................... 6 1.4 TEST SETUP .............................................................................................................................................................. 7 1.5 POWER SETTING CONFIGURATION PARAMETERS ............................................................................................................... 7 1.6 ANCILLARY EQUIPMENT .............................................................................................................................................. 8 2 SUMMARY OF TEST RESULT ............................................................................................................................... 9 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................10 3.1 TEST LABORATORY ................................................................................................................................................... 10 3.2 ENVIRONMENTAL CONDITIONS ................................................................................................................................... 10 3.3 MEASUREMENT UNCERTAINTY ................................................................................................................................... 10 3.4 TEST SOFTWARE ...................................................................................................................................................... 11 4 LIST OF TEST EQUIPMENT .................................................................................................................................12 5 TEST ITEM AND RESULTS ...................................................................................................................................14 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 14 5.1.1 Standard Requirement ............................................................................................................................. 14 5.1.2 Test Result ................................................................................................................................................. 14 5.2 CONDUCTED EMISSION ............................................................................................................................................. 15 5.2.1 Limits ........................................................................................................................................................ 15 5.2.2 Test Procedures ......................................................................................................................................... 15 5.2.3 Test Setup ................................................................................................................................................. 16 5.2.4 Test Result ................................................................................................................................................. 16 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.3.1 Limits ........................................................................................................................................................ 17 5.3.2 Test Procedures ......................................................................................................................................... 17 5.3.3 Test Setup ................................................................................................................................................. 17 5.3.4 Test Result ................................................................................................................................................. 18 5.3.5 Radiated Band Edge ................................................................................................................................. 23 5.4 PEAK OUTPUT POWER ...................................................................................................................................…

Text truncated - open the document above for the full version.

Ext Photos Model: TPC-B, TPC-R Radiated Emission Below 1GHz Radiated Emission Above 1GHz