2BVPE-L1L1WQuadruped Robot

GangBeng L1 Series User Manual Before using this product, users must carefully read the "User Manual for Bionic Quad- ruped Robot L1 Series Products". (hereinafter referred to as “this Manual”; the bionic quadru- ped robot is hereinafter referred to as the “robot dog”) and strictly follow the operating instructions provided herein. The company shall not be held liable for any property damage or personal injury result- ing from misuse or failure to adhere to the guidelines in this Manual. This product consists of multiple components—please ensure that it is kept out of reach of children to prevent acci- dents. This product is intended for use by individuals aged 18 and above only. To prolong the service life of the product, do not use it in environments with high tem- perature or high pressure. This Manual is intended to provide comprehensive information on the product’s func- tions and usage. However, due to continuous improvements and design updates, there may be discrepancies between the actual product and the descriptions in this Manual. In case of any differences in color, appearance, or other aspects, the actual product shall prevail. The certified model of L1 is ZSL-1, and the certified model of L1-W is ZSXG02. Legal Disclaimer 01 1 This product must not be used by individuals with physical, sensory, or mental impair- ments, or by those lacking relevant experience and knowledge (including children), unless supervised or instructed by a responsible guardian to ensure safe operation. Do not allow children to treat this product as a toy. Supervise children and pets during operation to keep them at a safe distance. If the power cord is damaged, it must be replaced with a special cord or component obtained from the manufacturer or authorized service provider. Do not operate the product in elevated areas without protective barriers. If the product exhibits abnormal behavior such as leg flailing or violent shaking, press the Emergency Stop button to activate the soft-stop safety mode. The robot will automatically lie down. Resume operation only after troubleshooting and resolving the issue. Do not place the product upside down. Do not use the robot's legs as handles for carrying. Do not operate the product in environments above 40°C or below 0°C. Do not operate the product in areas with electromagnetic interference. Do not operate the product in environments with Wi-Fi or 2.4G signal interference. Before starting the product, ensure there is at least 1 meter of clear space around it, with no people or objects in the motion path, to prevent collisions. When the product is ascending or descending stairs or slopes, do not stand below it to avoid injury in case of a fall. Do not place children, pets, or any objects on the robot, whether it is in motion or sta- tionary. Do not insert hands into the range of motion of the robot's joints during transport, to avoid pinching or cuts. Power off the robot and unplug the power cord before cleaning or performing mainte- nance on the robot or charging dock. Do not wipe the robot or charging dock with a wet cloth or rinse them with any liquids. Moving parts, keep body parts away from moving parts. Usage Restrictions 02 2 Do not disassemble, repair, or modify the robot, battery, or charging dock. Unauthorized modifications or repairs will void the warranty. Do not place the charging dock near heat sources. Do not dispose of used batteries in household waste. They should be handled by certified recycling facilities. If the product will not be used for an extended period, fully charge the battery, turn off the robot, and store it in a cool, dry place. Recharge at least once every 3 months to prevent battery over-discharge. When transporting the product, ensure it is powered off and preferably packed in its original packaging. Always operate the product in accordance with the instructions in this manual. The user assumes full responsibility for any damage or injury caused by improper use. This product is intended for commercial, civilian, and research applications only. Military use is strictly prohibited. （1）Joint and Cable Inspection Check for any foreign objects around the joints, inspect all cables for damage, and ensure that the foot pads are intact and undamaged. （2）Battery Level and Camera Cleaning Check for any foreign objects around the joints, inspect all cables for damage, and ensure that the foot pads are intact and undamaged. （3）Product Cleaning Caution Do not use alcohol or any liquid containing solvents or corrosive substances to clean this product. （6）Safe Operation and Terrain Adaptability Keep the robot within your line of sight and maintain a safe distance from obstacles and potential collision points. Although the robot has good terrain adaptability, always assess whether the surface is appropriate. （4）Proper Placement and Ground Conditions When placing the robot, ensure that the legs are in a naturally unloaded state to prevent stress on the joints. Do not rest the robot on hard, sharp, or uneven surfaces to avoid scratching the body. （5）Foot Pad Wear When placing the robot, ensure that the legs are in a naturally unloaded state to prevent stress on the joints. Do not rest the robot on hard, sharp, or uneven surfaces to avoid scratch- ing the body. Usage Restrictions 02 Precautions 03 3 （7）Speed, Turning, and Complex Terrain Sharp or fast turns may cause loss of control, especially on steep, uneven, or unknown terrain. Avoid risky maneuvers and reduce speed accordingly. （1）Battery Usage Restrictions Do not disassemble the battery or extract the battery electrodes for use by any means. （2）Adapter and Cleaning Do not clean the power adapter with alcohol or other flammable agents to avoid potential safety hazards. （3）In Case of Battery Leakage If battery leakage causes electrolyte to come into contact with your eyes, avoid rubbing them. Rinse immediately with clean water and seek medical attention promptly. （8）Steep Slopes and Climbing Ang…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Kunshan). This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, or any agency of the U.S. Government. Page 1 of 212 FCC PART 15.407 TEST REPORT For Zhishen Xinchuang (Suzhou) Intelligent Technology Co., Ltd. Floor 5, Building 3, No. 58 Nanhu Road, Chengnan Street, Wuzhong District, Suzhou City, Jiangsu Province, China FCC ID: 2BVPE-L1L1W Report Type: Original Report Product Name: Quadruped Robot Report Number: RBJ260416001-00C Report Date: 2026-06-29 Reviewed By: Jason Lu Approved By: Kyle Xu Test Laboratory: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan, Jiangsu Province, China Tel: +86-512-86175000 Fax: +86-512-88934268 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 2 of 212 TABLE OF CONTENTS REPORT REVISION HISTORY................................................................................................................................. 3 GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EUT EXERCISE SOFTWARE .......................................................................................................................................... 8 EQUIPMENT MODIFICATIONS ..................................................................................................................................... 19 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................. 19 EXTERNAL I/O CABLE................................................................................................................................................ 19 BLOCK DIAGRAM OF TEST SETUP .............................................................................................................................. 19 SUMMARY OF TEST RESULTS ............................................................................................................................. 21 TEST EQUIPMENT LIST ......................................................................................................................................... 22 FCC §1.1310 & §2.1091 - MAXIMUM PERMISSIBLE EXPOSURE (MPE) ....................................................... 23 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 25 APPLICABLE STANDARD ............................................................................................................................................ 25 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 25 FCC §15.205 & §15.209 & §15.407(B) – UNDESIRABLE EMISSION & RESTRICTED BANDS .................... 26 APPLICABLE STANDARD ............................................................................................................................................ 26 TEST SYSTEM SETUP .................................................................................................................................................. 26 EMI TEST RECEIVER & SPECTRUM ANALYZER SETUP .............................................................................................. 29 TEST PROCEDURE ...................................................................................................................................................... 29 FCC §15.407(a) &§15.407(e)–EMISSION BANDWIDTH ...................................................................................... 30 APPLICABLE STANDARD ............................................................................................................................................ 30 TEST PROCEDURE ...................................................................................................................................................... 30 FCC §15.407(a) – CONDUCTED TRANSMITTER OUTPUT POWER ............................................................... 31 APPLICABLE STANDARD ............................................................................................................................................ 31 TEST PROCEDURE ...................................................................................................................................................... 31 FCC §15.407(a) - POWER SPECTRAL DENSITY ................................................................................................. 32 AP…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RBJ260416001 1 / 3 EXHIBIT D - TEST SETUP PHOTOGRAPHS Model: ZSXG02 Radiated Emissions (Below 30 MHz) Radiated Emissions (30MHz-1GHz) Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RBJ260416001 2 / 3 Radiated Spurious Emissions (1-18 GHz) Radiated Spurious Emissions (18-40 GHz) Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RBJ260416001 3 / 3 Model: ZSL-1 Radiated Emissions (Below 30 MHz) Radiated Emissions (30MHz-1GHz)

Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RBJ260416001 1 / 1 EXHIBIT E - TEST SETUP PHOTOGRAPHS

Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com SPECIFICATION APPLICATION FOR APPROVAL CUSTOMER： Jushenzhiren CUST P/N: PART NAME: FPC Antenna DEVE NO: WTTX240354B WUTONG NO： REVISION REV.NO. DATE DESCRIPTION X1 2026.0 3.05 APPROVAL Customer Approved by Wutong Holding Group Co., Ltd Drawn by Checked by Approved by Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com 1、Electrical parameters Frequency 2.4~2.5GHz/5.15~5.85GHz Impedance 50±2 Ohm S.W.R. ≤ 2.0 (FOR chassis test) Max Input Power >= 5 W 2、Mechanical parameters Connector Type MHF PLUGFOR 1.13Cable Cable Type 1.13 Coaxial cable, black Packaging PE bag packaging 3、Operating/ Storage Temperature Operating Temperature -30°C~65°C Storage Temperature -30°C~65°C Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com 4： Product drawings Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com 5： Test report 5.1：VSWR 5.2：Gain&Efficiency Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com 5.3：2D directional diagram 2.4G 5G

Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com SPECIFICATION APPLICATION FOR APPROVAL CUSTOMER： Jushenzhiren CUST P/N: PART NAME: FPC Antenna DEVE NO: WTTX240353B WUTONG NO： REVISION REV.NO. DATE DESCRIPTION X1 2026.0 3.05 APPROVAL Customer Approved by Wutong Holding Group Co., Ltd Drawn by Checked by Approved by Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com 1、Electrical parameters Frequency 2.4~2.5GHz/5.15~5.85GHz Impedance 50±2 Ohm S.W.R. ≤ 2.0 (FOR chassis test) Max Input Power >= 5 W 2、Mechanical parameters Connector Type MHF PLUGFOR 1.13Cable Cable Type 1.13 Coaxial cable, black Packaging PE bag packaging 3、Operating/ Storage Temperature Operating Temperature -30°C~65°C Storage Temperature -30°C~65°C Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com 4： Product drawings Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com 5： Test report 5.1：VSWR 5.2：Gain&Efficiency Wutong Holding Group Co., Ltd Address: No. 2596, Taidong Road, Caohu Street, Xiangcheng District Economic Development Zone, Suzhou City Phone: 0512-83952295 Fax: 0512-65467778 Website: www.cnwutong.com 5.3：2D directional diagram 2.4G 5G

Page 1 of 24 FCC PART 15.407 TEST REPORT For Zhishen Xinchuang (Suzhou) Intelligent Technology Co., Ltd. Floor 5, Building 3, No. 58 Nanhu Road, Chengnan Street, Wuzhong District, Suzhou City, Jiangsu Province, China FCC ID: 2BVPE-L1L1W Report Type: Original Report Product Name: Quadruped Robot Report Number: RBJ260416001-00D Report Date: 2026-06-15 Reviewed By: Jason Lu Approved By: Kyle Xu Test Laboratory: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan, Jiangsu Province, China Tel: +86-512-86175000 Fax: +86-512-88934268 www.baclcorp.com.cn Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Kunshan). This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, or any agency of the U.S.Government. Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00D Page 2 of 24 TABLE OF CONTENTS REPORT REVISION HISTORY ................................................................................................................................ 3 GENERAL INFORMATION ...................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) .................................................................................... 4 OBJECTIVE................................................................................................................................................................... 4 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY ................................................................................................................................... 5 TEST FACILITY ............................................................................................................................................................ 5 SYSTEM TEST CONFIGURATION ......................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 EUT EXERCISE SOFTWARE.......................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 EXTERNAL I/O CABLE ................................................................................................................................................. 6 SUMMARY OF TEST RESULTS............................................................................................................................... 7 TEST EQUIPMENT LIST AND DETAILS .......................................................................................................................... 8 APPLICABLE STANARDS ........................................................................................................................................ 9 SYSTEM BLOCK DIAGRAM ........................................................................................................................................ 13 CONDUCTED METHOD ............................................................................................................................................... 14 RADIATED METHOD .................................................................................................................................................. 15 TEST PROCEDURE ...................................................................................................................................................... 15 APPLICABLE STANARDS ...................................................................................................................................... 16 TEST DATA: SEE APPENDIX ....................................................................................................................................... 16 CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME ............................................. 17 TEST DATA: SEE APPENDIX ....................................................................................................................................... 17 NON-OCCUPANCY PERIOD .................................................................................................................................. 18 TEST DATA: SEE APPENDIX ....................................................................................................................................... 18 EUT PHOTOGRAPHS .............................................................................................................................................. 19 TEST SETUP PHOTOGRAPHS ............................................................................................................................... 20 APPENDIX - TEST DATA ........................................................................................................................................ 21 DFS DETECTION THRESHOLDS ......................................................................................................................... 21 CHANNEL MOVE TIME AND CHANNEL CLOSING TRANSMISSION TIME ................................................ 22 NON-OCCUPANCY PERIOD.........................................................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 195 of 212 802.11ac20_5200MHz 802.11ac20_5240MHz 802.11ac40_5190MHz 802.11ac40_5230MHz 5250-5350MHz 802.11ac80_5210MHz 802.11a_5260MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 196 of 212 802.11a_5300MHz 802.11a_5320MHz 802.11ac20_5260MHz 802.11ac20_5300MHz 802.11ac20_5320MHz 802.11ac40_5270MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 197 of 212 802.11ac40_5310MHz 802.11ac80_5290MHz 5470-5725MHz Band: 802.11a_5500MHz 802.11a_5600MHz 802.11a_5700MHz 802.11a_5720MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 198 of 212 802.11ac20_5500MHz 802.11ac20_5600MHz 802.11ac20_5700MHz 802.11ac20_5720MHz 802.11ac40_5510MHz 802.11ac40_5590MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 199 of 212 802.11ac40_5670MHz 802.11ac40_5710MHz 802.11ac80_5530MHz 802.11ac80_5610MHz 802.11ac80_5690MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 200 of 212 5725-5850MHz Band: 802.11a_5745MHz 802.11a_5785MHz 802.11a_5825MHz 802.11ac20_5745MHz 802.11ac20_5785MHz 802.11ac20_5825MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 201 of 212 802.11ac40_5755MHz 802.11ac40_5795MHz 802.11ac80_5775MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 202 of 212 Chain 1 5150-5250MHz Band: 802.11a_5180MHz 802.11a_5200MHz 802.11a_5240MHz 802.11ac20_5180MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 203 of 212 802.11ac20_5200MHz 802.11ac20_5240MHz 802.11ac40_5190MHz 802.11ac40_5230MHz 5250-5350MHz 802.11ac80_5210MHz 802.11a_5260MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 204 of 212 802.11a_5300MHz 802.11a_5320MHz 802.11ac20_5260MHz 802.11ac20_5300MHz 802.11ac20_5320MHz 802.11ac40_5270MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 205 of 212 802.11ac40_5310MHz 802.11ac80_5290MHz 5470-5725MHz Band: 802.11a_5500MHz 802.11a_5600MHz 802.11a_5700MHz 802.11a_5720MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 206 of 212 802.11ac20_5500MHz 802.11ac20_5600MHz 802.11ac20_5700MHz 802.11ac20_5720MHz 802.11ac40_5510MHz 802.11ac40_5590MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 207 of 212 802.11ac40_5670MHz 802.11ac40_5710MHz 802.11ac80_5530MHz 802.11ac80_5610MHz 802.11ac80_5690MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 208 of 212 5725-5850MHz Band: 802.11a_5745MHz 802.11a_5785MHz 802.11a_5825MHz 802.11ac20_5745MHz 802.11ac20_5785MHz 802.11ac20_5825MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 209 of 212 802.11ac40_5755MHz 802.11ac40_5795MHz 802.11ac80_5775MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 210 of 212 EUT PHOTOGRAPHS Please refer to the attachment EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS and EXHIBIT B - INTERNAL PHOTOGRAPHS. Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 211 of 212 TEST SETUP PHOTOGRAPHS Please refer to the attachment EXHIBIT D - TEST SETUP PHOTOGRAPHS. Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 212 of 212 Declarations 1. The laboratory is not responsible for the authenticity of any information provided by the applicant. Information from the applicant that may affect test results is marked with “★”. 2. The test data was only valid for the test sample(s). 3. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. 4. Otherwise required by the applicant or Product Regulations, Decision Rule in this report did not consider the uncertainty. 5. The extended uncertainty given in this report is obtained by combining the standard uncertainty times the coverage factor k=2 with the 95.45% confidence interval. *****END OF REPORT*****

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 171 of 212 802.11ac40_5270MHz 802.11ac40_5310MHz 802.11ac80_5290MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 172 of 212 5470-5725MHz Band: 802.11a_5500MHz 802.11a_5600MHz 802.11a_5700MHz 802.11a_5720MHz 802.11ac20_5500MHz 802.11ac20_5600MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 173 of 212 802.11ac20_5700MHz 802.11ac20_5720MHz 802.11ac40_5510MHz 802.11ac40_5590MHz 802.11ac40_5670MHz 802.11ac40_5710MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 174 of 212 802.11ac80_5530MHz 802.11ac80_5610MHz 802.11ac80_5690MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 175 of 212 5725-5850MHz Band: 802.11a_5745MHz 802.11a_5785MHz 802.11a_5825MHz 802.11ac20_5745MHz 802.11ac20_5785MHz 802.11ac20_5825MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 176 of 212 802.11ac40_5755MHz 802.11ac40_5795MHz 802.11ac80_5775MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 177 of 212 Chain 1 5150-5250 MHz Band: 802.11a_5180MHz 802.11a_5200MHz 802.11a_5240MHz 802.11ac20_5180MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 178 of 212 802.11ac20_5200MHz 802.11ac20_5240MHz 802.11ac40_5190MHz 802.11ac40_5230MHz 802.11ac80_5210MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 179 of 212 5250-5350MHz Band: 802.11a_5260MHz 802.11a_5300MHz 802.11a_5320MHz 802.11ac20_5260MHz 802.11ac20_5300MHz 802.11ac20_5320MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 180 of 212 802.11ac40_5270MHz 802.11ac40_5310MHz 802.11ac80_5290MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 181 of 212 5470-5725MHz Band: 802.11a_5500MHz 802.11a_5600MHz 802.11a_5700MHz 802.11a_5720MHz 802.11ac20_5500MHz 802.11ac20_5600MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 182 of 212 802.11ac20_5700MHz 802.11ac20_5720MHz 802.11ac40_5510MHz 802.11ac40_5590MHz 802.11ac40_5670MHz 802.11ac40_5710MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 183 of 212 802.11ac80_5530MHz 802.11ac80_5610MHz 802.11ac80_5690MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 184 of 212 5725-5850MHz Band: 802.11a_5745MHz 802.11a_5785MHz 802.11a_5825MHz 802.11ac20_5745MHz 802.11ac20_5785MHz 802.11ac20_5825MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 185 of 212 802.11ac40_5755MHz 802.11ac40_5795MHz 802.11ac80_5775MHz Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RBJ260416001-00C Page 186 of 212 CONDUCTED TRANSMITTER OUTPUT POWER Environmental Conditions & Test Information Test Date: 2026-06-02 to 2026-06-03 Temperature: 24.5-25.5 °C Relative Humidity: 44-49% ATM Pressure: 101.4-101.9 kPa Test Result: Pass Test Engineer: Neil Zhou Test Mode: Transmitting Band Mode Frequency (MHz) Conducted average output power (dBm) Limit (dBm) Chain 0 Chain 1 Total 5150-5250 MHz 802.11a 5180 10.56 13.59 / 24 5200 10.73 13.78 / 5240 11.00 14.06 / 802.11ac20 5180 8.57 8.61 11.60 5200 8.51 8.77 11.65 5240 8.87 8.95 11.92 802.11ac40 5190 10.65 10.82 13.75 5230 10.93 11.30 14.13 802.11ac80 5210 8.58 8.81 11.71 Note: EUT is a client device The maximum antenna gain is 3.9 dBi, the device employed Cyclic Delay Diversity (CDD) for 802.11 MIMO transmitting, per KDB 662911 D01 Multiple Transmitter Output v02r01, for power measurements on…

Text truncated - open the document above for the full version.